Wax/Trace triad: arrow-key bay picker + S: backup path

Two operator-UX improvements for the Backup / Export / Install triad.

1. Backup target moves from \\tsgwp00525\...\formtracepac to S:\2 WJ Scans
   Record Retention\backup\waxtrace\<asset>\. S: is mapped at shopfloor
   imaging time and stays mapped post-categorization, so the same default
   path works whether the operator runs the backup on an old bay (manual
   pre-image capture) or a freshly imaged one. The destination directory
   is created if missing.

2. New Select-WaxtraceAsset.ps1 - arrow-key bay picker patterned after
   the WinPE select-waxtrace-asset.ps1. Reads bay-config.csv (sibling
   file), shows asset_tag + ftpak_version + model + user_id per row, and
   returns the selected asset_tag via stdout. Falls back to a manual
   entry prompt if the CSV is missing or the operator picks "Other".

   Backup / Export / Install now invoke the picker when interactive AND
   bay-config.csv is alongside the script. Non-interactive paths
   (qga / SYSTEM / scheduled task) keep silently defaulting to
   COMPUTERNAME so unattended runs are unchanged.

   Export gained an -AssetNumber parameter and stamps it into the output
   CSV filename so multiple inventories from the same host stay
   distinguishable when the operator is auditing several bays in a row.

bay-config.csv is copied into the scripts\ dir so the picker has a
source of truth that ships next to the scripts (and into pxe-images
for tech distribution).

Smoke tested on win11 VM: all four PS1 parse-clean, non-interactive
backup path still produces a valid ZIP (silent COMPUTERNAME default),
picker handles missing-CSV gracefully (manual-entry fallback). The
arrow-key UX itself is operator-verifiable only on a real terminal.

playbook/shopfloor-setup/gea-shopfloor-waxtrace/scripts/Backup-FormtracepakSettings.ps1

@@ -16,13 +16,13 @@
     Asset number (e.g. WJRP1234) used to namespace the backup on the shopfloor
     share. If omitted, the script prompts interactively and defaults to the
     current $env:COMPUTERNAME. The asset number is the leaf folder under
-        \\tsgwp00525.wjs.geaerospace.net\shared\DT\Shopfloor\backup\formtracepac\
+        S:\2 WJ Scans Record Retention\backup\waxtrace\
     Ignored if -Destination is supplied.
 
 .PARAMETER Destination
     Where to write the ZIP file. Can be a USB drive, network share, or local path.
-    If omitted, defaults to the per-asset path on the GE shopfloor share:
+    If omitted, defaults to the per-asset path on the mapped S: drive:
-        \\tsgwp00525.wjs.geaerospace.net\shared\DT\Shopfloor\backup\formtracepac\<AssetNumber>
+        S:\2 WJ Scans Record Retention\backup\waxtrace\<AssetNumber>
     The destination directory is created if it does not exist.
 
 .PARAMETER NoZip
@@ -45,18 +45,31 @@ param(
     [switch]$IncludeExecutables
 )
 
-$SharedRoot = '\\tsgwp00525.wjs.geaerospace.net\shared\DT\Shopfloor\backup\formtracepac'
+$SharedRoot = 'S:\2 WJ Scans Record Retention\backup\waxtrace'
 
 if (-not $Destination) {
     if (-not $AssetNumber) {
         $defaultAsset = $env:COMPUTERNAME
         if ([Environment]::UserInteractive -and -not [Console]::IsInputRedirected) {
+            # Prefer arrow-key picker against bay-config.csv if it is sitting
+            # next to this script. Falls through to a plain Read-Host prompt
+            # if no picker / no CSV available.
+            $picker = Join-Path $PSScriptRoot 'Select-WaxtraceAsset.ps1'
+            $cfg    = Join-Path $PSScriptRoot 'bay-config.csv'
+            if ((Test-Path -LiteralPath $picker) -and (Test-Path -LiteralPath $cfg)) {
+                $picked = & $picker -ConfigCsv $cfg -Title 'Backup FormTracePak - pick the bay being captured'
+                if ($picked) {
+                    $AssetNumber = $picked
+                }
+            }
+            if (-not $AssetNumber) {
                 $input = Read-Host "Asset number for this backup (e.g. WJRP1234) [$defaultAsset]"
                 if ([string]::IsNullOrWhiteSpace($input)) {
                     $AssetNumber = $defaultAsset
                 } else {
                     $AssetNumber = $input.Trim()
                 }
+            }
         } else {
             # Non-interactive (qga / SYSTEM / scheduled task): fall back to COMPUTERNAME silently.
             $AssetNumber = $defaultAsset

playbook/shopfloor-setup/gea-shopfloor-waxtrace/scripts/Export-FormtracepakInventory.ps1

@@ -15,16 +15,46 @@
 .PARAMETER ComputerName
     Hostname to stamp on the inventory rows. Defaults to $env:COMPUTERNAME.
 
+.PARAMETER AssetNumber
+    Asset number (e.g. WJRP1234) used in the output CSV filename so multiple
+    inventories from the same host stay distinguishable. If omitted, the script
+    prompts interactively (with arrow-key picker if bay-config.csv is alongside)
+    and defaults to $ComputerName non-interactively.
+
 .EXAMPLE
     .\Export-FormtracepakInventory.ps1
-    .\Export-FormtracepakInventory.ps1 -OutputPath "E:\inventories"
+    .\Export-FormtracepakInventory.ps1 -OutputPath "E:\inventories" -AssetNumber WJRP2335
 #>
 [CmdletBinding()]
 param(
     [string]$OutputPath = $PSScriptRoot,
-    [string]$ComputerName = $env:COMPUTERNAME
+    [string]$ComputerName = $env:COMPUTERNAME,
+    [string]$AssetNumber
 )
 
+if (-not $AssetNumber) {
+    if ([Environment]::UserInteractive -and -not [Console]::IsInputRedirected) {
+        $picker = Join-Path $PSScriptRoot 'Select-WaxtraceAsset.ps1'
+        $cfg    = Join-Path $PSScriptRoot 'bay-config.csv'
+        if ((Test-Path -LiteralPath $picker) -and (Test-Path -LiteralPath $cfg)) {
+            $picked = & $picker -ConfigCsv $cfg -Title 'Inventory FormTracePak - pick the bay being audited'
+            if ($picked) {
+                $AssetNumber = $picked
+            }
+        }
+        if (-not $AssetNumber) {
+            $assetInput = Read-Host "Asset number to stamp on inventory (e.g. WJRP1234) [$ComputerName]"
+            if ([string]::IsNullOrWhiteSpace($assetInput)) {
+                $AssetNumber = $ComputerName
+            } else {
+                $AssetNumber = $assetInput.Trim()
+            }
+        }
+    } else {
+        $AssetNumber = $ComputerName
+    }
+}
+
 Set-StrictMode -Version Latest
 $ErrorActionPreference = 'Continue'
 
@@ -98,7 +128,7 @@ $MitutoyoFileExtensions = @(
 # ----------------------------------------------------------------------
 
 $timestamp = Get-Date -Format 'yyyyMMdd_HHmmss'
-$csvFile   = Join-Path $OutputPath "formtracepak_inventory_${ComputerName}_${timestamp}.csv"
+$csvFile   = Join-Path $OutputPath "formtracepak_inventory_${AssetNumber}_${ComputerName}_${timestamp}.csv"
 $inventory = [System.Collections.Generic.List[PSObject]]::new()
 
 function Add-Item {

playbook/shopfloor-setup/gea-shopfloor-waxtrace/scripts/Install-FormtracepakSettings.ps1

@@ -20,8 +20,8 @@
 .PARAMETER BackupPath
     Path to the backup ZIP, directory containing a backup ZIP, or already-extracted
     backup folder created by Backup-FormtracepakSettings.ps1. If omitted, defaults
-    to the per-asset path on the GE shopfloor share:
+    to the per-asset path on the mapped S: drive:
-        \\tsgwp00525.wjs.geaerospace.net\shared\DT\Shopfloor\backup\formtracepac\<AssetNumber>
+        S:\2 WJ Scans Record Retention\backup\waxtrace\<AssetNumber>
     If the path is a directory, the newest formtracepak_backup_*.zip inside it is used.
 
 .PARAMETER RestoreRegistry
@@ -60,18 +60,29 @@ param(
     [switch]$Force
 )
 
-$SharedRoot = '\\tsgwp00525.wjs.geaerospace.net\shared\DT\Shopfloor\backup\formtracepac'
+$SharedRoot = 'S:\2 WJ Scans Record Retention\backup\waxtrace'
 
 if (-not $BackupPath) {
     if (-not $AssetNumber) {
         $defaultAsset = $env:COMPUTERNAME
         if ([Environment]::UserInteractive -and -not [Console]::IsInputRedirected) {
+            # Prefer arrow-key picker against bay-config.csv if available.
+            $picker = Join-Path $PSScriptRoot 'Select-WaxtraceAsset.ps1'
+            $cfg    = Join-Path $PSScriptRoot 'bay-config.csv'
+            if ((Test-Path -LiteralPath $picker) -and (Test-Path -LiteralPath $cfg)) {
+                $picked = & $picker -ConfigCsv $cfg -Title 'Restore FormTracePak - pick the bay being restored'
+                if ($picked) {
+                    $AssetNumber = $picked
+                }
+            }
+            if (-not $AssetNumber) {
                 $assetInput = Read-Host "Asset number to restore (e.g. WJRP1234) [$defaultAsset]"
                 if ([string]::IsNullOrWhiteSpace($assetInput)) {
                     $AssetNumber = $defaultAsset
                 } else {
                     $AssetNumber = $assetInput.Trim()
                 }
+            }
         } else {
             $AssetNumber = $defaultAsset
             Write-Host "Non-interactive session - defaulting AssetNumber to $AssetNumber. Pass -AssetNumber or -BackupPath to override."

playbook/shopfloor-setup/gea-shopfloor-waxtrace/scripts/Select-WaxtraceAsset.ps1

@@ -0,0 +1,110 @@
+<#
+.SYNOPSIS
+    Arrow-key bay picker for Wax/Trace Export / Backup / Install scripts.
+
+.DESCRIPTION
+    Reads bay-config.csv (asset_tag,ftpak_version,model,user_id) and presents
+    an Up/Down picker. Returns the chosen asset_tag to stdout so the calling
+    script can capture it. Always appends an "Other (manual entry)" option.
+
+    Same UX as the WinPE select-waxtrace-asset.ps1 used by startnet.cmd.
+    Distinct from that script because it returns the asset tag via stdout
+    rather than writing to a file, and presents the richer per-bay columns
+    (FTPak version + model + USER ID) from bay-config.csv.
+
+.PARAMETER ConfigCsv
+    Path to bay-config.csv. Defaults to a sibling file next to this script.
+
+.PARAMETER Title
+    Header text shown above the picker. Defaults to "Wax/Trace Asset".
+
+.OUTPUTS
+    String. The chosen asset_tag, printed to stdout. Empty string on cancel.
+
+.EXAMPLE
+    $asset = & .\Select-WaxtraceAsset.ps1
+    $asset = & .\Select-WaxtraceAsset.ps1 -ConfigCsv 'C:\foo\bay-config.csv' -Title 'Pick bay to back up'
+#>
+[CmdletBinding()]
+param(
+    [string]$ConfigCsv = (Join-Path $PSScriptRoot 'bay-config.csv'),
+    [string]$Title     = 'Wax/Trace Asset'
+)
+
+$ErrorActionPreference = 'Continue'
+
+function Read-BayList {
+    param([string]$Path)
+    if (-not (Test-Path -LiteralPath $Path)) { return @() }
+    try {
+        return Import-Csv -LiteralPath $Path |
+               Sort-Object -Property asset_tag
+    } catch {
+        return @()
+    }
+}
+
+function Show-Menu {
+    param([object[]]$Items, [int]$Selected, [string]$Title)
+    Clear-Host
+    Write-Host ''
+    Write-Host '  ============================================================'
+    Write-Host "    $Title"
+    Write-Host '  ============================================================'
+    Write-Host ''
+    Write-Host '  Up / Down arrows = navigate, Enter = select, Esc = cancel'
+    Write-Host ''
+    Write-Host ('    {0,-10} {1,-8} {2,-10} {3}' -f 'ASSET', 'FTPAK', 'MODEL', 'USER ID')
+    Write-Host ('    {0,-10} {1,-8} {2,-10} {3}' -f '-----', '-----', '-----', '-------')
+    for ($i = 0; $i -lt $Items.Count; $i++) {
+        $item = $Items[$i]
+        if ($item -is [string]) {
+            $line = $item
+        } else {
+            $line = '{0,-10} {1,-8} {2,-10} {3}' -f $item.asset_tag, $item.ftpak_version, $item.model, $item.user_id
+        }
+        if ($i -eq $Selected) {
+            Write-Host ('  > ' + $line) -ForegroundColor Black -BackgroundColor White
+        } else {
+            Write-Host ('    ' + $line)
+        }
+    }
+    Write-Host ''
+}
+
+$bays = @(Read-BayList -Path $ConfigCsv)
+$menuItems = @()
+foreach ($b in $bays) { $menuItems += $b }
+$menuItems += '** Other (enter asset tag manually) **'
+
+if ($menuItems.Count -eq 1) {
+    # Only the manual-entry sentinel: CSV missing or unparseable. Fall back
+    # to a plain prompt rather than wedging the operator in an empty menu.
+    Write-Host "  (bay-config.csv not readable at $ConfigCsv - falling back to manual entry)"
+    $manual = Read-Host "  Enter asset tag (e.g. WJRP9999) or blank to abort"
+    if ($manual) { return $manual.Trim().ToUpper() } else { return '' }
+}
+
+$sel = 0
+while ($true) {
+    Show-Menu -Items $menuItems -Selected $sel -Title $Title
+    $key = [System.Console]::ReadKey($true)
+    switch ($key.Key) {
+        'UpArrow'   { if ($sel -gt 0) { $sel-- } }
+        'DownArrow' { if ($sel -lt ($menuItems.Count - 1)) { $sel++ } }
+        'Enter'     {
+            if ($sel -eq ($menuItems.Count - 1)) {
+                Write-Host ''
+                $manual = Read-Host '  Enter asset tag (e.g. WJRP9999) or blank to abort'
+                if ($manual) {
+                    return $manual.Trim().ToUpper()
+                } else {
+                    return ''
+                }
+            } else {
+                return $bays[$sel].asset_tag
+            }
+        }
+        'Escape'    { return '' }
+    }
+}

playbook/shopfloor-setup/gea-shopfloor-waxtrace/scripts/bay-config.csv

@@ -0,0 +1,16 @@
+asset_tag,ftpak_version,model,user_id
+WJF00159,6.103,AVANT,3974839712
+WJRP3689,5.510,CV-4500,3744284509
+WJRP2660,6.0,CV-4500,2365986521
+WJRP2659,6.0,CV-4500,2709054503
+WJF00545,6.213,AVANT,3878777362
+WJRP3638,5.602,CV-4500,0720778210
+WJF00052,6.103,AVANT,3270314998
+WJF00084,6.103,AVANT,1476212857
+WJF00083,6.103,AVANT,2934506987
+WJRP3025,6.0,CV-3200,2292822471
+WJF00197,6.104,AVANT,1191612605
+WJRP4802,6.002,AVANT,0920866935
+WJRP2347,6.0,CV-4500,3585172946
+WJRP2035,6.0,CV-4500,2292822471
+WJRP2335,6.0,CV-4500,1780916688