Share accounts: per-site Samba passwords from the webapp

Tools > Share accounts sets the pxe-upload, blancco and clonezilla Samba
passwords. Saving one runs smbpasswd and writes it everywhere it is used:
startnet.cmd in boot.wim (pxe-upload), the served Blancco preferences and
the live config.img (blancco), the iPXE menu's Clonezilla entries
(clonezilla). Refused while a PC is imaging unless forced. Stored 0600 in
UPDATES_DIR/shares/accounts.json, never shown back.

- The stored values are the authority: the playbook only creates the
  Samba accounts, seeds the store from site-vars (pxe_upload_password,
  blancco_smb_password, clonezilla_smb_password) for accounts it does not
  hold, and runs "share_accounts apply" at the end of every run.
- Every startnet save re-pins SHAREPASS, so a restored snapshot cannot
  bring an old password back; new menu blocks use %SHAREUSER%/%SHAREPASS%.
- Shop floor unattend Order 4 reads the login from fetch-source.txt;
  Invoke-PostPpkg deletes that file once the PPKG is applied.
- Upload-Image.ps1 asks for the password unless -Pass is given.
- pxe_admin_password: the Linux pxe login. Required while the box still
  has the shipped "pxe"; set with chpasswd when it differs.
- Blancco site settings now also reach the live config.img (BIOS path).

playbook/FlatUnattendW10-shopfloor.xml

@@ -202,8 +202,8 @@
 				</SynchronousCommand>
 				<SynchronousCommand wcm:action="add">
 					<Order>4</Order>
-					<CommandLine>powershell.exe -ep Bypass -Command "net use Z: \\172.16.9.1\enrollment /user:pxe-upload pxe; robocopy Z:\shopfloor-setup C:\Enrollment Fetch-StagingPayload.ps1 Verify-And-Heal-Staging.ps1 /R:2 /W:2; robocopy Z:\scripts C:\Enrollment run-enrollment.ps1 wait-for-internet.ps1 migrate-to-wifi.ps1 /R:2 /W:2"</CommandLine>
+					<CommandLine>powershell.exe -ep Bypass -Command "$u='pxe-upload'; $p='pxe'; $f='C:\Enrollment\fetch-source.txt'; if (Test-Path $f) { $l=@(Get-Content $f); if ($l.Count -ge 3) { $u=$l[1].Trim(); $p=$l[2].Trim() } }; net use Z: \\172.16.9.1\enrollment /user:$u $p; robocopy Z:\shopfloor-setup C:\Enrollment Fetch-StagingPayload.ps1 Verify-And-Heal-Staging.ps1 /R:2 /W:2; robocopy Z:\scripts C:\Enrollment run-enrollment.ps1 wait-for-internet.ps1 migrate-to-wifi.ps1 /R:2 /W:2"</CommandLine>
-					<Description>Bootstrap self-heal: pull Fetch/Verify-Heal + enrollment scripts from the PXE share so Order 5/6 run after an early WinPE staging failure.</Description>
+					<Description>Bootstrap self-heal: pull Fetch/Verify-Heal + enrollment scripts from the PXE share so Order 5/6 run after an early WinPE staging failure. Share login from fetch-source.txt (startnet writes it).</Description>
 				</SynchronousCommand>
 				<SynchronousCommand wcm:action="add">
 					<Order>5</Order>

playbook/pxe_server_setup.yml

@@ -199,6 +199,17 @@
     # letters, digits . _ ~ - (it sits in a URI, a kernel command line and
     # a mount option list), 8 to 64 of them.
     clonezilla_smb_password: "clonezilla-backup"
+    # The two other Samba accounts. pxe-upload: WinPE and Shop Floor setup
+    # on every imaging PC, image and app uploads. blancco: Blancco's report
+    # share. Same rules as clonezilla_smb_password. Empty: the shipped
+    # default (pxe / blancco). All three only SEED the webapp's Tools >
+    # Share accounts on the first run that sees them; after that the webapp
+    # owns them and a re-run keeps what it holds.
+    pxe_upload_password: ""
+    blancco_smb_password: ""
+    # The server's Linux login (pxe: SSH and sudo). Required while the box
+    # still has the shipped password "pxe"; set on every run it differs.
+    pxe_admin_password: ""
     # The site, as stamped on Blancco erasure reports and the monthly CMMC
     # evidence packs (webapp BLANCCO_SITE). Empty: "Unnamed site", so a
     # missing name shows instead of another site's. Letters, digits, spaces
@@ -377,6 +388,46 @@
           site-specific value in playbook/site-vars.yml and re-run.
       when: clonezilla_smb_password == "clonezilla-backup"
 
+    - name: "Shares: check the pxe-upload and blancco Samba passwords"
+      assert:
+        that:
+          - pxe_upload_password is string and blancco_smb_password is string
+          - pxe_upload_password | length == 0 or pxe_upload_password is match('^[A-Za-z0-9._~-]{8,64}$')
+          - blancco_smb_password | length == 0 or blancco_smb_password is match('^[A-Za-z0-9._~-]{8,64}$')
+        fail_msg: >-
+          pxe_upload_password and blancco_smb_password must be empty or 8-64
+          characters from A-Z a-z 0-9 . _ ~ - (they go into startnet.cmd and
+          the Blancco preferences). Fix them in playbook/site-vars.yml and re-run.
+        quiet: yes
+
+    - name: "Admin: is the Linux pxe login still the shipped password?"
+      shell: |
+        h=$(getent shadow pxe | cut -d: -f2)
+        case "$h" in
+          '$6$'*) salt=$(printf '%s' "$h" | cut -d'$' -f3)
+                  if [ "$(printf 'pxe' | openssl passwd -6 -salt "$salt" -stdin)" = "$h" ]; then echo DEFAULT; else echo SITE; fi ;;
+          *) echo UNKNOWN ;;
+        esac
+      args:
+        executable: /bin/bash
+      register: pxe_admin_state
+      changed_when: false
+
+    - name: "Admin: check pxe_admin_password"
+      assert:
+        that:
+          - pxe_admin_password is string
+          - pxe_admin_password | length > 0 or pxe_admin_state.stdout != 'DEFAULT'
+          - pxe_admin_password | length == 0 or (pxe_admin_password | length >= 8 and pxe_admin_password | length <= 128)
+          - pxe_admin_password | length == 0 or pxe_admin_password is not search('[\x00-\x1f]')
+          - pxe_admin_password != 'pxe'
+        fail_msg: >-
+          Set pxe_admin_password in playbook/site-vars.yml (8-128 characters,
+          no line breaks): the Linux login pxe (SSH and sudo) still has the
+          shipped password "pxe", the same on every server. Fix the file and
+          re-run.
+        quiet: yes
+
     # --- Re-run safety (nothing below changes the box until these pass) ---
     - name: "Re-run safety: is imaging in progress? (SMB sessions, recent DHCP leases)"
       args:
@@ -1473,28 +1524,49 @@
           valid users = pxe-upload
           comment = Dell BIOS update bundle (read-only, served to WinPE)
 
-    - name: "Create Samba users (pxe-upload and blancco)"
+    # The Samba passwords belong to the webapp (Tools > Share accounts):
+    # here the accounts are only created, with the site-vars value or the
+    # default; "Shares: apply the stored passwords" near the end sets them.
+    - name: "Create Samba users (pxe-upload, blancco, clonezilla)"
+      # clonezilla: system user, no home, no login shell; only [clonezilla]
+      # lists it in valid users.
       shell: |
+        add() {  # user password
+          pdbedit -L 2>/dev/null | grep -q "^$1:" && return 0
+          printf '%s\n%s\n' "$2" "$2" | smbpasswd -a -s "$1" >/dev/null && echo "created $1"
+        }
         id pxe-upload >/dev/null 2>&1 || useradd -M -s /usr/sbin/nologin pxe-upload
-        echo -e 'pxe\npxe' | smbpasswd -a pxe-upload -s
         id blancco >/dev/null 2>&1 || useradd -M -s /usr/sbin/nologin blancco
-        echo -e 'blancco\nblancco' | smbpasswd -a blancco -s
-      args:
-        executable: /bin/bash
-      changed_when: false
-
-    - name: "Create the clonezilla Samba user ([clonezilla] share only)"
-      # System user, no home, no login shell. Only [clonezilla] lists it in
-      # valid users. smbpasswd runs every time so a changed
-      # clonezilla_smb_password takes effect (the menu is updated with it).
-      shell: |
         id clonezilla >/dev/null 2>&1 || useradd -r -M -d /nonexistent -s /usr/sbin/nologin clonezilla
-        printf '%s\n%s\n' "$CZ_PW" "$CZ_PW" | smbpasswd -a -s clonezilla >/dev/null
+        add pxe-upload "${UP_PW:-pxe}"
+        add blancco "${BL_PW:-blancco}"
+        add clonezilla "$CZ_PW"
       environment:
+        UP_PW: "{{ pxe_upload_password }}"
+        BL_PW: "{{ blancco_smb_password }}"
         CZ_PW: "{{ clonezilla_smb_password }}"
       args:
         executable: /bin/bash
-      changed_when: false
+      register: smb_users
+      changed_when: "'created' in smb_users.stdout"
+      no_log: true
+
+    - name: "Admin: set the Linux pxe password from pxe_admin_password"
+      shell: |
+        h=$(getent shadow pxe | cut -d: -f2)
+        salt=$(printf '%s' "$h" | cut -d'$' -f3)
+        if [ -n "$salt" ] && [ "$(printf '%s' "$PW" | openssl passwd -6 -salt "$salt" -stdin)" = "$h" ]; then
+          echo UNCHANGED
+        else
+          printf 'pxe:%s\n' "$PW" | chpasswd && echo CHANGED
+        fi
+      environment:
+        PW: "{{ pxe_admin_password }}"
+      args:
+        executable: /bin/bash
+      register: pxe_admin_set
+      changed_when: "'CHANGED' in pxe_admin_set.stdout"
+      when: pxe_admin_password | length > 0
       no_log: true
 
     - name: "Deploy nf_conntrack TCP timeout sysctl for PXE workload"
@@ -2001,12 +2073,6 @@
         dest: "{{ web_root }}/blancco/blancco-progress.py"
         mode: '0644'
 
-    - name: "Ensure Samba user for Blancco reports exists (idempotent)"
-      shell: |
-        id blancco >/dev/null 2>&1 || useradd -r -s /usr/sbin/nologin blancco
-        pdbedit -L 2>/dev/null | grep -q '^blancco:' || (echo -e "blancco\nblancco" | smbpasswd -a -s blancco)
-      changed_when: false
-
     - name: "Check for WinPE deployment content on USB"
       stat:
         path: "{{ usb_root }}/images"
@@ -2422,6 +2488,28 @@
       debug:
         msg: "{{ blancco_render.stdout_lines | select('search', 'CHANGED|WARNING|seeded') | list }}"
 
+    # The Samba passwords: seeded from site-vars only for accounts the
+    # webapp does not hold yet (Tools > Share accounts owns them after
+    # that), then set in Samba, startnet.cmd in boot.wim (this run injected
+    # the USB copy), the iPXE menu's Clonezilla entries (rendered from
+    # site-vars above) and the Blancco preferences. Passwords via env.
+    - name: "Shares: apply the stored passwords"
+      command: python3 -m services.share_accounts apply --seed
+      args:
+        chdir: /opt/pxe-webapp
+      environment:
+        WEB_ROOT: "{{ web_root }}"
+        SHARE_SEED_PXE_UPLOAD: "{{ pxe_upload_password }}"
+        SHARE_SEED_BLANCCO: "{{ blancco_smb_password }}"
+        SHARE_SEED_CLONEZILLA: "{{ clonezilla_smb_password }}"
+      no_log: true
+      register: share_apply
+      changed_when: share_apply.stdout_lines | select('search', 'updated|seeded') | list | length > 0
+
+    - name: "Shares: apply result"
+      debug:
+        msg: "{{ share_apply.stdout_lines }}"
+
     # Hard gate: blancco-init.sh in initramfs drops to shell if the served
     # preferences.xml is malformed or missing the SMB target. Fail the
     # playbook here too so the problem surfaces at deploy time, not at the

playbook/shopfloor-setup/Shopfloor/Invoke-PostPpkg.ps1

@@ -13,6 +13,8 @@
 #      same, but it runs as Users and the HKLM write can be denied.
 #   3. Once Monitor-IntuneProgress has written C:\Enrollment\sync-complete.txt,
 #      remove the "Shopfloor Intune Sync" logon task.
+# Also, once the PPKG is applied, delete C:\Enrollment\fetch-source.txt (the
+# pxe-upload share login startnet leaves for the first-logon scripts).
 # When all three are done the task unregisters itself.
 #
 # Never throws: every step logs and the script exits 0.
@@ -47,6 +49,19 @@ if (Test-Path -LiteralPath $doneMarker) {
     }
 }
 
+# 1b. fetch-source.txt holds the pxe-upload share password (startnet writes
+#     it for the first-logon Fetch/Verify scripts). Once the PPKG has run the
+#     PC is off the imaging LAN and the file has no use left.
+$fetchSource = 'C:\Enrollment\fetch-source.txt'
+if ((Test-Path -LiteralPath $appliedMarker) -and (Test-Path -LiteralPath $fetchSource)) {
+    try {
+        Remove-Item -LiteralPath $fetchSource -Force -ErrorAction Stop
+        Write-Host "Removed $fetchSource (share login)."
+    } catch {
+        Write-Warning "Could not remove ${fetchSource}: $_"
+    }
+}
+
 # 2. AutoLogonCount after the ShopFloor handover
 $handedOver = $false
 $countGone  = $true

scripts/diagnostics/Capture-LockdownState.ps1

@@ -474,6 +474,6 @@ Write-Host ""
 Write-Host "Snapshot complete: $out"
 Write-Host ""
 Write-Host "Next: copy that folder to the workstation. Easiest:"
-Write-Host "  net use Z: \\172.16.9.1\image-upload /user:pxe-upload pxe /persistent:no"
+Write-Host "  net use Z: \\172.16.9.1\image-upload /user:pxe-upload <password> /persistent:no"
 Write-Host "  robocopy `"$out`" `"Z:\state-$Stage-$stamp`" /E /NFL /NDL /NJH /NJS"
 Write-Host "  net use Z: /delete /y"

scripts/download-drivers.py

@@ -33,7 +33,7 @@ from pathlib import Path
 REPO_DIR = Path(__file__).resolve().parent
 PXE_HOST = "172.16.9.1"
 PXE_USER = "pxe"
-PXE_PASS = "pxe"
+PXE_PASS = os.environ.get("PXE_PASS") or "pxe"  # the site's pxe_admin_password
 UPLOAD_DEST = "/home/pxe/image-upload"
 IMAGE_BASE = "/srv/samba/winpeapps"
 

scripts/preflight.py

@@ -37,7 +37,7 @@ REPO = os.path.dirname(HERE)
 
 PXE_HOST = "172.16.9.1"
 PXE_USER = "pxe"
-PXE_PASS = "pxe"
+PXE_PASS = os.environ.get("PXE_PASS") or "pxe"  # the site's pxe_admin_password
 MODELS_TXT = "/srv/samba/winpeapps/_shared/BIOS/models.txt"
 IMAGE_BASE = "/srv/samba/winpeapps"
 

scripts/share-drift.py

@@ -40,7 +40,7 @@ import sys
 REPO = os.path.dirname(os.path.dirname(os.path.abspath(__file__)))
 PXE_HOST = "172.16.9.1"
 PXE_USER = "pxe"
-PXE_PASS = "pxe"
+PXE_PASS = os.environ.get("PXE_PASS") or "pxe"  # the site's pxe_admin_password
 
 GIT_OWNED, UNRECONCILED = "git-owned", "unreconciled"
 

tests/vm/README.md

@@ -70,7 +70,8 @@ Watch the server with `virt-viewer -c qemu:///system pxetest-server` (VNC on
 127.0.0.1) or screenshots. On the installed system, first-boot output goes
 to `/var/log/first-boot.log`. Once the GE NIC takes a DHCP lease on the NAT
 network, `status.sh` shows its address and `ssh pxe@<address>` works from
-the host.
+the host (password `pxetest-admin`, or `PXETEST_ADMIN_PASSWORD` given to
+build-image.sh).
 
 The offline package set must be built against the SAME ISO the image is
 built from (download-packages.sh resolves against that ISO's base). For a

tests/vm/build-image.sh

@@ -11,6 +11,9 @@
 #   server with its GE NIC unplugged: virsh domif-setlink pxetest-server
 #   52:54:00:9e:10:01 down --config).
 # Env:   PXETEST_PAYLOAD_ROOT (where offline-packages/, boot-files/... live)
+#        PXETEST_ADMIN_PASSWORD (the server's pxe login, default pxetest-admin)
+#        PXETEST_UPLOAD_PASSWORD / _BLANCCO_PASSWORD / _CLONEZILLA_PASSWORD
+#        (optional share password seeds)
 source "$(dirname "$0")/common.sh"
 
 SIZE=auto
@@ -69,6 +72,16 @@ corp_nic_mac: "$SERVER_GE_MAC"   # libvirt default NAT ("GE/corp")
 YML
     log "site vars: pxe_nic_mac=$SERVER_IMAGING_MAC corp_nic_mac=$SERVER_GE_MAC"
 fi
+# The server's Linux login (required while it has the shipped "pxe") and,
+# when set, seeds for the share accounts (Tools > Share accounts).
+{
+    echo "pxe_admin_password: \"${PXETEST_ADMIN_PASSWORD:-pxetest-admin}\""
+    [ -n "${PXETEST_UPLOAD_PASSWORD:-}" ] && echo "pxe_upload_password: \"$PXETEST_UPLOAD_PASSWORD\""
+    [ -n "${PXETEST_BLANCCO_PASSWORD:-}" ] && echo "blancco_smb_password: \"$PXETEST_BLANCCO_PASSWORD\""
+    [ -n "${PXETEST_CLONEZILLA_PASSWORD:-}" ] && echo "clonezilla_smb_password: \"$PXETEST_CLONEZILLA_PASSWORD\""
+    true
+} >>"$SITE_VARS"
+log "site vars: pxe_admin_password set (PXETEST_ADMIN_PASSWORD, default pxetest-admin)"
 
 "$REPO_ROOT/scripts/build-usb.sh" --yes --payload-root "$PXETEST_PAYLOAD_ROOT" \
     --site-vars "$SITE_VARS" \

webapp/app.py

@@ -58,6 +58,7 @@ from services import (
     imaging_status,
     mcl_ppkg,
     nic_status,
+    share_accounts,
     system,
     unattend,
     upload_verify,
@@ -72,6 +73,7 @@ from views import images as images_views
 from views import images_drivers as images_drivers_views
 from views import images_unattend as images_unattend_views
 from views import engineering_layer as engineering_layer_views
+from views import share_accounts as share_accounts_views
 from views import ipxe as ipxe_views
 
 app = Flask(__name__)
@@ -99,6 +101,7 @@ app.register_blueprint(images_views.bp)
 app.register_blueprint(images_drivers_views.bp)
 app.register_blueprint(images_unattend_views.bp)  # Unattend review/save/undo
 app.register_blueprint(engineering_layer_views.bp)  # Engineer image: Engineering Layer upload
+app.register_blueprint(share_accounts_views.bp)  # Tools > Share accounts (Samba passwords)
 
 
 # ---------------------------------------------------------------------------
@@ -1605,6 +1608,13 @@ def _startnet_save_content(new_content, prior, action, detail):
         # still let the operator save (the raw editor is the source of truth).
         flash(f"Warning: could not snapshot prior startnet.cmd: {exc}", "warning")
 
+    # pxe-upload's password belongs to Tools > Share accounts: a restored
+    # snapshot or a hand edit cannot put an old one back.
+    pinned = share_accounts.pin_startnet(new_content)
+    if pinned != new_content:
+        flash("set SHAREPASS= was changed back to the pxe-upload password "
+              "(change it on Tools > Share accounts).", "warning")
+        new_content = pinned
     ok, err = wim.update_startnet(config.BOOT_WIM, new_content)
     if not ok:
         flash(f"Failed to update boot.wim: {err}", "danger")

webapp/services/blancco_prefs.py

@@ -4,6 +4,8 @@ Three values differ per site and are filled into our preferences.xml:
   business_location  printed on every erasure report (the site)
   wifi_ssid          the Wi-Fi Blancco joins to license erasures in the GE
   wifi_password      Blancco cloud (the imaging LAN has no internet)
+A fourth, the password of the blancco Samba account in <network_share>,
+comes from services/share_accounts.py (Tools > Share accounts).
 
 They live in UPDATES_DIR/blancco/site-settings.json (0600, root). The repo's
 playbook/blancco-preferences.xml carries none of them; the playbook installs
@@ -38,6 +40,10 @@ _LOCATION = re.compile(rb"(<business_location>)[^<]*(</business_location>)")
 _WIRELESS = re.compile(
     rb'(<wireless>\s*<enabled>[^<]*</enabled>\s*<ssid encrypted="false">)[^<]*'
     rb'(</ssid>\s*<password encrypted="false">)[^<]*(</password>)')
+# The report share login: the blancco Samba account (Tools > Share accounts).
+_SHARE = re.compile(
+    rb'(<network_share>\s*<username encrypted="false">blancco</username>\s*'
+    rb'<password encrypted="false">)[^<]*(</password>)')
 
 
 def settings_path():
@@ -99,6 +105,8 @@ def apply(xml, settings=None):
     XML-escaped; the replacement is a function, so nothing in them is read
     as a regex group reference."""
     s = settings or load()
+    from services import share_accounts
+    share_pw = escape(share_accounts.load()["blancco"]).encode("utf-8")
     loc = escape(s["business_location"] or "Unnamed site").encode("utf-8")
     ssid = escape(s["wifi_ssid"]).encode("utf-8")
     pw = escape(s["wifi_password"]).encode("utf-8")
@@ -108,6 +116,9 @@ def apply(xml, settings=None):
     out, n = _WIRELESS.subn(lambda m: m.group(1) + ssid + m.group(2) + pw + m.group(3), out)
     if n != 1:
         raise ValueError("preferences have no single <wireless> ssid/password block")
+    out, n = _SHARE.subn(lambda m: m.group(1) + share_pw + m.group(2), out)
+    if n != 1:
+        raise ValueError("preferences have no single <network_share> login for blancco")
     return out
 
 

webapp/services/blancco_update.py

@@ -988,6 +988,32 @@ def apply_prefs(version):
     return meta
 
 
+def refresh_live_prefs():
+    """Re-render the served preferences.xml (site settings, share login)
+    and write the same preferences into the live config.img, which the
+    BIOS (native) boot path reads instead. Returns True if a file changed.
+    release.json keeps describing the release when it did before."""
+    from services import blancco_prefs
+    with _lock:
+        root = blancco_root()
+        meta_path = os.path.join(root, "release.json")
+        meta = uc.read_json(meta_path, None)
+        meta_ok = bool(meta and meta.get("fingerprint") == _fingerprint(root))
+        changed = blancco_prefs.render()
+        cfg_path = os.path.join(root, "config.img")
+        cfg = _read(cfg_path)
+        if cfg is not None:
+            with open(blancco_prefs.served_prefs_path(), "rb") as f:
+                ours = f.read()
+            new = patch_config_img(cfg, ours)
+            if new != cfg:
+                _atomic_write(cfg_path, new)
+                changed = True
+        if changed and meta_ok:
+            _write_live_meta(meta)
+    return changed
+
+
 def save_merged_prefs(version, data):
     """A human-merged preferences.xml for a staged version: check it, keep it,
     and finish staging with it."""

webapp/services/share_accounts.py

@@ -0,0 +1,255 @@
+"""Passwords of the three Samba accounts the imaging clients use.
+
+    pxe-upload  WinPE (startnet.cmd in boot.wim) maps the image and
+                enrollment shares with it; startnet writes it to
+                C:\\Enrollment\\fetch-source.txt for the Shop Floor first-logon
+                scripts (deleted by Invoke-PostPpkg.ps1 when imaging is
+                done). People use it to upload images and apps.
+    blancco     Blancco saves erasure reports to [blancco-reports] (the
+                <network_share> in our Blancco preferences).
+    clonezilla  Clonezilla's back up / restore entries in the iPXE menu
+                (smb3://clonezilla:<password>@server/clonezilla/).
+
+The stored values live in UPDATES_DIR/shares/accounts.json (0600, root) and
+are the authority: apply() puts each one into Samba (smbpasswd) and into
+every file that carries it, and the playbook runs apply at the end of every
+run, so a re-run (which re-injects startnet.cmd from the USB and renders the
+menu from site-vars) keeps them. The playbook seeds the file from site-vars
+(pxe_upload_password, blancco_smb_password, clonezilla_smb_password) only
+for accounts it does not hold yet.
+
+The WinPE image and the iPXE menu are served to any imaging client, so
+anything on the imaging LAN can read pxe-upload's and clonezilla's
+passwords. A site password still keeps other sites' PCs and people out.
+
+    python3 -m services.share_accounts apply [--seed]
+        --seed reads SHARE_SEED_PXE_UPLOAD / _BLANCCO / _CLONEZILLA from the
+        environment (not argv: the passwords stay out of ps).
+"""
+
+import json
+import os
+import re
+import subprocess
+import sys
+from datetime import datetime, timedelta
+
+import config
+from services import updates_common as uc
+
+ACCOUNTS = ("pxe-upload", "blancco", "clonezilla")
+DEFAULTS = {"pxe-upload": "pxe", "blancco": "blancco", "clonezilla": "clonezilla-backup"}
+SEED_ENV = {"pxe-upload": "SHARE_SEED_PXE_UPLOAD", "blancco": "SHARE_SEED_BLANCCO",
+            "clonezilla": "SHARE_SEED_CLONEZILLA"}
+# Each password sits in a cmd `set`, a `net use` line, XML, a smb3:// URI
+# and a kernel command line: only characters none of them treat specially.
+PASSWORD = re.compile(r"^[A-Za-z0-9._~-]{8,64}$")
+PASSWORD_RULE = "8 to 64 characters from A-Z a-z 0-9 . _ ~ -"
+# A PC that reported progress this recently is treated as still imaging.
+BUSY_WINDOW = timedelta(hours=2)
+
+class ApplyFailed(Exception):
+    """The password is stored, but putting it somewhere failed."""
+
+
+_SHAREPASS = re.compile(r"^([ \t]*set[ \t]+SHAREPASS=)[^\r\n]*", re.IGNORECASE | re.MULTILINE)
+_CZ_URI = re.compile(r"(smb3://clonezilla:)[^@\s\"]*(@)")
+
+
+def state_path():
+    return os.path.join(uc.state_dir("shares"), "accounts.json")
+
+
+def _stored():
+    data = uc.read_json(state_path(), None)
+    if not isinstance(data, dict):
+        return {}
+    return {a: data[a] for a in ACCOUNTS if isinstance(data.get(a), str) and data[a]}
+
+
+def load():
+    """Every account's current password (the default where none is stored)."""
+    out = dict(DEFAULTS)
+    out.update(_stored())
+    return out
+
+
+def _write(values):
+    path = state_path()
+    tmp = path + ".tmp"
+    fd = os.open(tmp, os.O_WRONLY | os.O_CREAT | os.O_TRUNC, 0o600)
+    with os.fdopen(fd, "w") as f:
+        json.dump(values, f, indent=1)
+    os.chmod(tmp, 0o600)
+    os.replace(tmp, path)
+
+
+def public():
+    """For the page: never the passwords, only whether each is the default."""
+    cur = load()
+    return [{"account": a, "default": cur[a] == DEFAULTS[a]} for a in ACCOUNTS]
+
+
+def check(account, password):
+    if account not in ACCOUNTS:
+        raise ValueError(f"unknown account {account!r}")
+    if not isinstance(password, str) or not PASSWORD.match(password):
+        raise ValueError(f"the {account} password must be {PASSWORD_RULE}")
+    if password == DEFAULTS[account]:
+        raise ValueError(f"that is the shipped default for {account}, the same at every site")
+
+
+def busy():
+    """Sessions that look like a PC imaging now: running, updated within
+    BUSY_WINDOW. A password change mid-run breaks that PC's next net use."""
+    from services import imaging_status
+    cutoff = datetime.now().astimezone() - BUSY_WINDOW
+    out = []
+    for s in imaging_status.list_sessions(include_inferred=False):
+        if imaging_status.floor_state(s) != "running":
+            continue
+        try:
+            when = datetime.fromisoformat(s.get("last_updated") or "")
+            if when.tzinfo is None:
+                when = when.astimezone()
+        except (ValueError, TypeError):
+            continue
+        if when >= cutoff:
+            out.append(s.get("hostname") or s.get("serial") or s.get("mac") or "?")
+    return out
+
+
+# --- where each password goes ----------------------------------------------
+
+def _smbpasswd(account, password):
+    """Set the Samba password (the account itself is the playbook's)."""
+    r = subprocess.run(["smbpasswd", "-s", "-a", account], input=f"{password}\n{password}\n",
+                       capture_output=True, text=True, timeout=30)
+    if r.returncode != 0:
+        raise RuntimeError(f"smbpasswd {account} failed: {(r.stderr or r.stdout).strip()}")
+
+
+def pin_startnet(content, password=None):
+    """startnet.cmd text with `set SHAREPASS=` set to pxe-upload's password.
+    Every startnet save goes through this, so restoring an old snapshot
+    cannot bring an old password back."""
+    pw = password if password is not None else load()["pxe-upload"]
+    return _SHAREPASS.sub(lambda m: m.group(1) + pw, content)
+
+
+def _apply_startnet(password):
+    from services import wim
+    if not os.path.isfile(config.BOOT_WIM):
+        return "boot.wim: not on this server yet (skipped)"
+    cur = wim.extract_startnet(config.BOOT_WIM)
+    if cur is None:
+        raise RuntimeError("could not read startnet.cmd from boot.wim")
+    if not _SHAREPASS.search(cur):
+        raise RuntimeError("startnet.cmd in boot.wim has no 'set SHAREPASS=' line; "
+                           "set the password in the Boot menu editor")
+    new = pin_startnet(cur, password)
+    if new == cur:
+        return "boot.wim: unchanged"
+    wim.save_snapshot(cur, note="SHARE_PASSWORD")
+    ok, err = wim.update_startnet(config.BOOT_WIM, new)
+    if not ok:
+        raise RuntimeError(f"boot.wim update failed: {err}")
+    return "boot.wim: startnet.cmd updated"
+
+
+def _apply_menu(password):
+    from services import blancco_update as bu
+    path = bu.menu_path()
+    if not os.path.isfile(path):
+        return "iPXE menu: not on this server yet (skipped)"
+    with bu._lock:
+        path, text, _ = bu._read_menu()
+        if not _CZ_URI.search(text):
+            return "iPXE menu: no Clonezilla share entries (skipped)"
+        new = _CZ_URI.sub(lambda m: m.group(1) + password + m.group(2), text)
+        if new == text:
+            return "iPXE menu: unchanged"
+        backup = bu._write_menu(path, new, "pre-share-password")
+        # The backup sits in the web root: it must not keep the old password.
+        os.remove(backup)
+    return "iPXE menu: Clonezilla entries updated"
+
+
+def _apply_blancco():
+    from services import blancco_update as bu
+    return "Blancco preferences: " + ("updated" if bu.refresh_live_prefs() else "unchanged")
+
+
+def apply(only=None, values=None):
+    """Put the stored passwords everywhere. Returns a list of what happened.
+    only: one account, or None for all three."""
+    values = values or load()
+    done = []
+    for account in ACCOUNTS:
+        if only and account != only:
+            continue
+        _smbpasswd(account, values[account])
+        done.append(f"Samba {account}: set")
+        if account == "pxe-upload":
+            done.append(_apply_startnet(values[account]))
+        elif account == "blancco":
+            done.append(_apply_blancco())
+        elif account == "clonezilla":
+            done.append(_apply_menu(values[account]))
+    return done
+
+
+def set_password(account, password, force=False):
+    """Store one account's password and apply it. Refused while PCs image
+    unless force. Returns the list of what happened."""
+    check(account, password)
+    if not force:
+        running = busy()
+        if running:
+            raise RuntimeError("PCs are imaging now (" + ", ".join(running[:5])
+                               + (", ..." if len(running) > 5 else "")
+                               + "); wait for them to finish, or tick 'change anyway'")
+    stored = _stored()
+    stored[account] = password
+    _write(stored)
+    try:
+        return apply(only=account)
+    except Exception as e:
+        raise ApplyFailed(str(e)) from e
+
+
+def seed_from_env():
+    """Store site-vars values for accounts the file does not hold yet."""
+    stored = _stored()
+    seeded = []
+    for account in ACCOUNTS:
+        value = os.environ.get(SEED_ENV[account], "")
+        if account in stored or not value or value == DEFAULTS[account]:
+            continue
+        if not PASSWORD.match(value):
+            raise ValueError(f"site-vars password for {account} must be {PASSWORD_RULE}")
+        stored[account] = value
+        seeded.append(account)
+    if seeded:
+        _write(stored)
+    return seeded
+
+
+def main(argv):
+    if not argv or argv[0] != "apply":
+        print(__doc__)
+        return 2
+    if "--seed" in argv[1:]:
+        for a in seed_from_env():
+            print(f"seeded {a} from site-vars")
+    for line in apply():
+        print(line)
+    for row in public():
+        if row["default"]:
+            print(f"WARNING: {row['account']} still has the shipped default password "
+                  "(set one on Tools > Share accounts)")
+    return 0
+
+
+if __name__ == "__main__":
+    sys.exit(main(sys.argv[1:]))

webapp/services/wim.py

@@ -446,7 +446,7 @@ def _synth_block(item, ip, eol_indent=""):
         "echo Starting %s setup..." % label,
         r'start "FlatApp" %SYSTEMDRIVE%\GESetup\FlatSetupLoader.exe',
         r"for /l %%i in (1,1,2000000) do rem",
-        r"net use Z: \\%s\winpeapps\%s /user:pxe-upload pxe /persistent:no"
+        r"net use Z: \\%s\winpeapps\%s /user:%%SHAREUSER%% %%SHAREPASS%% /persistent:no"
         % (ip, image),
         "goto end",
     ]

webapp/templates/base.html

@@ -78,6 +78,7 @@
         {{ navlink('Boot menu', url_for('startnet_editor'), ep == 'startnet_editor') }}
         {{ navlink('Enrollment packages', url_for('enrollment'), ep == 'enrollment') }}
         {{ navlink('Clonezilla backups', url_for('clonezilla_backups'), ep == 'clonezilla_backups') }}
+        {{ navlink('Share accounts', url_for('share_accounts.page'), ep.startswith('share_accounts.')) }}
         {{ navlink('Audit log', url_for('audit_log'), ep == 'audit_log') }}
       </div>
     </div>

webapp/templates/share_accounts.html

@@ -0,0 +1,83 @@
+{% extends "base.html" %}
+{% import '_ui.html' as ui %}
+{% block title %}Share accounts - PXE Manager{% endblock %}
+
+{# Tools > Share accounts: one row per Samba account the imaging clients use,
+   each with its own password form. Passwords are never shown back.
+   services/share_accounts.py. #}
+
+{% block extra_head %}
+<style>
+  .sec-h { padding: 18px 24px 12px; }
+  .sec-h .sub { margin-top: 2px; }
+  .acct { padding: 14px 24px 16px; border-top: 1px solid var(--line); display: flex; flex-direction: column; gap: 10px; }
+  .acct-top { display: flex; flex-wrap: wrap; align-items: center; gap: 6px 12px; }
+  .acct-top .name { font-weight: 600; }
+  .acct-top .sub { flex: 1 1 18rem; min-width: 0; }
+  .acct form { display: flex; flex-wrap: wrap; align-items: flex-end; gap: 10px 12px; margin: 0; }
+  .acct .fld { display: flex; flex-direction: column; gap: 4px; flex: 1 1 14rem; min-width: 0; max-width: 20rem; }
+  .acct label { font-size: 13px; color: var(--muted); margin: 0; }
+  .acct .force { display: flex; align-items: center; gap: 6px; font-size: 13px; }
+  .busy { padding: 12px 24px; }
+  @media (max-width: 760px) {
+    .sec-h, .acct, .busy { padding-left: 16px; padding-right: 16px; }
+    .acct .fld { max-width: none; }
+  }
+</style>
+{% endblock %}
+
+{% block content %}
+<header class="ui-head">
+  <div>
+    <div class="eyebrow-t">Tools</div>
+    <h1>Share accounts</h1>
+    <div class="sub">The Samba logins the imaging PCs, Blancco and Clonezilla use on this server. Give each site its own: the shipped defaults are the same at every site.</div>
+  </div>
+</header>
+
+<div class="ui-stack">
+{% if busy %}
+<div class="notice busy" role="status">
+  {{ busy | length }} PC{{ 's' if busy | length != 1 }} imaging now ({{ busy[:5] | join(', ') }}{{ ', ...' if busy | length > 5 }}). A password change now breaks their next share connection, so it is refused unless you tick <strong>Change anyway</strong>.
+</div>
+{% endif %}
+
+<section class="panel ui-list" aria-labelledby="acct-h">
+  <div class="sec-h"><h2 id="acct-h" class="sec">Accounts</h2>
+    <div class="sub">Passwords: {{ rule }}. Saving changes Samba and every file that carries the password (boot.wim, the PXE boot menu, the Blancco preferences) at once. They are never shown here.</div></div>
+  {% for a in accounts %}
+  <div class="acct">
+    <div class="acct-top">
+      <span class="name mono">{{ a.account }}</span>
+      {% if a.default %}{{ ui.chip('Default password', 'warn') }}{% else %}{{ ui.chip('Site password', 'ok') }}{% endif %}
+      <span class="sub">{{ used_by[a.account] }}</span>
+    </div>
+    <form method="post" action="{{ url_for('share_accounts.save', account=a.account) }}" autocomplete="off"
+          onsubmit="return confirm('Change the {{ a.account }} password? Anything that still uses the old one (a PC imaging now, a saved login) stops working.');">
+      <input type="hidden" name="_csrf_token" value="{{ csrf_token() }}">
+      <div class="fld">
+        <label for="pw-{{ loop.index }}">New password</label>
+        <input type="password" class="form-control" id="pw-{{ loop.index }}" name="password" required
+               minlength="8" maxlength="64" pattern="[A-Za-z0-9._~\-]{8,64}" autocomplete="new-password">
+      </div>
+      <div class="fld">
+        <label for="cf-{{ loop.index }}">Again</label>
+        <input type="password" class="form-control" id="cf-{{ loop.index }}" name="confirm" required
+               minlength="8" maxlength="64" autocomplete="new-password">
+      </div>
+      {% if busy %}<label class="force"><input type="checkbox" name="force" value="1"> Change anyway</label>{% endif %}
+      <button type="submit" class="ui-btn pri sm">Save</button>
+    </form>
+  </div>
+  {% endfor %}
+</section>
+
+<section class="panel" style="padding: 16px 24px" aria-labelledby="note-h">
+  <h2 id="note-h" class="sec" style="font-size: 15px">Where else to change it</h2>
+  <ul class="sub" style="margin: 6px 0 0; padding-left: 20px">
+    <li><strong>pxe-upload</strong>: anyone who maps the shares by hand, and <span class="mono">Upload-Image.ps1</span> (it asks for the password).</li>
+    <li>The server's own Linux login (<span class="mono">pxe</span>) is not set here: it is <span class="mono">pxe_admin_password</span> in <span class="mono">site-vars.yml</span>.</li>
+  </ul>
+</section>
+</div>
+{% endblock %}

webapp/tests/test_share_accounts.py

@@ -0,0 +1,300 @@
+"""Tools > Share accounts: the pxe-upload, blancco and clonezilla Samba
+passwords, and every file each one goes into.
+
+Run from the webapp folder:
+    PYTHONPATH=.:<deps> python -m unittest tests.test_share_accounts -v
+"""
+import json
+import os
+import re
+import shutil
+import stat
+import subprocess
+import sys
+import tempfile
+import unittest
+from datetime import datetime, timedelta
+from unittest import mock
+
+_T = tempfile.mkdtemp(prefix="pxe-shares-test-")
+for _k, _sub in {"SAMBA_SHARE": "samba", "CLONEZILLA_SHARE": "cz", "BLANCCO_REPORTS": "br",
+                 "ENROLLMENT_SHARE": "enr", "WEB_ROOT": "www", "IMAGING_DIR": "img", "UPDATES_DIR": "upd",
+                 "TFTP_ROOT": "tftp", "BIOS_DIR": "bios", "UPLOAD_DIR": "upl", "SAMBA_LOG_DIR": "smblog",
+                 "STARTNET_BACKUPS_DIR": "snb"}.items():
+    os.environ.setdefault(_k, os.path.join(_T, _sub))
+    os.makedirs(os.environ[_k], exist_ok=True)
+for _k in ("AUDIT_LOG", "HARDWARE_STATE", "BLANCCO_STATE", "DNSMASQ_LEASES", "APACHE_ACCESS_LOG",
+           "DNSMASQ_SYSLOG", "NIC_STATUS_FILE", "NIC_CONF", "DNSMASQ_NIC_CONF", "DNSMASQ_CONF", "CLONEZILLA_STATE"):
+    os.environ.setdefault(_k, os.path.join(_T, _k.lower()))
+
+WEBAPP = os.path.dirname(os.path.dirname(os.path.abspath(__file__)))
+REPO = os.path.dirname(WEBAPP)
+sys.path.insert(0, WEBAPP)
+os.chdir(WEBAPP)
+
+import config  # noqa: E402
+import app as A  # noqa: E402
+from services import blancco_prefs as BP  # noqa: E402
+from services import blancco_update as BU  # noqa: E402
+from services import share_accounts as SA  # noqa: E402
+from services import wim  # noqa: E402
+
+PW = "Site-Pass_2026"
+
+
+def newc(files):
+    """A newc cpio archive of {name: bytes} (what Blancco's config.img is)."""
+    out = b""
+    def entry(name, data, mode):
+        nb = name.encode() + b"\0"
+        hdr = b"070701" + b"".join(b"%08X" % v for v in (
+            1, mode, 0, 0, 1, 0, len(data), 0, 0, 0, 0, len(nb), 0))
+        blob = hdr + nb
+        blob += b"\0" * (-len(blob) % 4)
+        blob += data + b"\0" * (-len(data) % 4)
+        return blob
+    for name, data in files.items():
+        out += entry(name, data, 0o100644)
+    return out + entry("TRAILER!!!", b"", 0)
+
+
+def cpio_file(data, name):
+    return BU.cpio_member(data, name)
+
+
+def startnet_text():
+    with open(os.path.join(REPO, "playbook", "startnet.cmd"), encoding="utf-8") as f:
+        return f.read()
+
+
+def menu_text():
+    with open(os.path.join(REPO, "playbook", "ipxe", "GetPxeScript.aspx"), encoding="utf-8") as f:
+        return f.read().replace("__CLONEZILLA_SMB_PASSWORD__", "clonezilla-backup")
+
+
+class Fixture(unittest.TestCase):
+    def setUp(self):
+        for d in (config.UPDATES_DIR, config.WEB_ROOT, config.IMAGING_DIR, wim.BACKUPS_DIR):
+            shutil.rmtree(d, ignore_errors=True)
+            os.makedirs(d)
+        # boot.wim with the repo startnet.cmd
+        src = tempfile.mkdtemp(dir=_T)
+        os.makedirs(os.path.join(src, "Windows", "System32"))
+        with open(os.path.join(src, "Windows", "System32", "startnet.cmd"), "w", newline="\r\n") as f:
+            f.write(startnet_text().replace("\r\n", "\n"))
+        os.makedirs(os.path.dirname(config.BOOT_WIM))
+        subprocess.run(["wimcapture", src, config.BOOT_WIM, "--compress=none"], check=True,
+                       capture_output=True)
+        # iPXE menu as the playbook renders it
+        os.makedirs(os.path.dirname(BU.menu_path()))
+        with open(BU.menu_path(), "w", newline="") as f:
+            f.write(menu_text())
+        # Blancco: repo preferences, served copy, and a live config.img
+        os.makedirs(BU.blancco_root(), exist_ok=True)
+        with open(os.path.join(REPO, "playbook", "blancco-preferences.xml"), "rb") as f:
+            repo = f.read()
+        with open(BP.repo_prefs_path(), "wb") as f:
+            f.write(repo)
+        BP.render()
+        with open(BP.served_prefs_path(), "rb") as f:
+            served = f.read()
+        prefs_in_img = served + b"\0" * 3000 + b"<!-- " + b"x" * 200 + b" -->\n"
+        self.cfg = newc({"report.key": b"KEY", "preferences.xml": prefs_in_img, "config.xml": b"<c/>"})
+        with open(os.path.join(BU.blancco_root(), "config.img"), "wb") as f:
+            f.write(self.cfg)
+        self.smb = mock.patch.object(SA, "_smbpasswd").start()
+        self.addCleanup(mock.patch.stopall)
+
+    def startnet(self):
+        return wim.extract_startnet(config.BOOT_WIM)
+
+    def menu(self):
+        with open(BU.menu_path()) as f:
+            return f.read()
+
+    def prefs_share_pw(self, data):
+        m = re.search(rb'<network_share>\s*<username encrypted="false">blancco</username>\s*'
+                      rb'<password encrypted="false">([^<]*)</password>', data)
+        return m.group(1).decode()
+
+
+class ShareAccounts(Fixture):
+    def test_defaults_and_public_hides_passwords(self):
+        self.assertEqual(SA.load(), SA.DEFAULTS)
+        pub = SA.public()
+        self.assertTrue(all(r["default"] for r in pub))
+        self.assertNotIn("pxe", json.dumps(pub).replace("pxe-upload", ""))
+
+    def test_rules(self):
+        for bad in ("short", "has space 123", "semi;colon12", "pct%PATH%xx", "a" * 65, "amp&ersand12"):
+            with self.assertRaises(ValueError, msg=bad):
+                SA.check("pxe-upload", bad)
+        with self.assertRaisesRegex(ValueError, "shipped default"):
+            SA.check("clonezilla", "clonezilla-backup")
+        with self.assertRaises(ValueError):
+            SA.check("root", PW)
+        SA.check("blancco", "Ok.pass_~-123")
+
+    def test_pxe_upload_goes_into_samba_and_startnet(self):
+        done = SA.set_password("pxe-upload", PW)
+        self.smb.assert_called_once_with("pxe-upload", PW)
+        self.assertIn("boot.wim: startnet.cmd updated", done)
+        sn = self.startnet()
+        self.assertRegex(sn, r"(?m)^set SHAREPASS=%s\r$" % re.escape(PW))
+        self.assertIn("set SHAREUSER=pxe-upload", sn)
+        self.assertEqual(sn.count("\r\n"), sn.count("\n"))  # still CRLF
+        # Only that line changed.
+        a = startnet_text().replace("\r\n", "\n").splitlines()
+        b = sn.replace("\r\n", "\n").splitlines()
+        self.assertEqual([i for i, (x, y) in enumerate(zip(a, b)) if x != y],
+                         [a.index("set SHAREPASS=pxe")])
+        # The prior startnet was snapshotted.
+        self.assertTrue(any(s["note"] == "SHARE_PASSWORD" for s in wim.list_snapshots()))
+        # Stored privately.
+        st = os.stat(SA.state_path())
+        self.assertEqual(stat.S_IMODE(st.st_mode), 0o600)
+        self.assertEqual(SA.load()["pxe-upload"], PW)
+        self.assertFalse(SA.public()[0]["default"])
+
+    def test_clonezilla_goes_into_the_menu_without_a_backup_left(self):
+        before = set(os.listdir(os.path.dirname(BU.menu_path())))
+        SA.set_password("clonezilla", PW)
+        m = self.menu()
+        self.assertEqual(m.count(f"smb3://clonezilla:{PW}@"), 2)
+        self.assertNotIn("clonezilla-backup", m)
+        self.assertEqual(set(os.listdir(os.path.dirname(BU.menu_path()))), before)
+        self.assertEqual(m, menu_text().replace("clonezilla:clonezilla-backup@", f"clonezilla:{PW}@"))
+
+    def test_blancco_goes_into_served_prefs_and_live_config_img(self):
+        SA.set_password("blancco", PW)
+        with open(BP.served_prefs_path(), "rb") as f:
+            served = f.read()
+        self.assertEqual(self.prefs_share_pw(served), PW)
+        with open(os.path.join(BU.blancco_root(), "config.img"), "rb") as f:
+            cfg = f.read()
+        self.assertEqual(len(cfg), len(self.cfg))
+        self.assertEqual(self.prefs_share_pw(cpio_file(cfg, "preferences.xml")), PW)
+        self.assertEqual(cpio_file(cfg, "report.key"), b"KEY")
+        # A release staged later gets it too (apply_prefs runs blancco_prefs.apply).
+        with open(BP.repo_prefs_path(), "rb") as f:
+            self.assertEqual(self.prefs_share_pw(BP.apply(f.read())), PW)
+
+    def test_apply_is_idempotent(self):
+        SA.set_password("pxe-upload", PW)
+        SA.set_password("clonezilla", PW + "x")
+        SA.set_password("blancco", PW + "y")
+        done = SA.apply()
+        self.assertIn("boot.wim: unchanged", done)
+        self.assertIn("iPXE menu: unchanged", done)
+        self.assertIn("Blancco preferences: unchanged", done)
+
+    def test_refused_while_a_pc_images(self):
+        now = datetime.now().astimezone()
+        with open(os.path.join(config.IMAGING_DIR, "ABC123.json"), "w") as f:
+            json.dump({"serial": "ABC123", "hostname": "BAY-7", "status": "in_progress",
+                       "stage_index": 3, "last_updated": now.isoformat()}, f)
+        with open(os.path.join(config.IMAGING_DIR, "OLD1.json"), "w") as f:
+            json.dump({"serial": "OLD1", "status": "in_progress", "stage_index": 3,
+                       "last_updated": (now - timedelta(hours=5)).isoformat()}, f)
+        self.assertEqual(SA.busy(), ["BAY-7"])
+        with self.assertRaisesRegex(RuntimeError, "BAY-7"):
+            SA.set_password("pxe-upload", PW)
+        self.assertEqual(SA.load()["pxe-upload"], "pxe")  # nothing stored
+        self.smb.assert_not_called()
+        SA.set_password("pxe-upload", PW, force=True)
+        self.assertEqual(SA.load()["pxe-upload"], PW)
+
+    def test_seed_only_for_accounts_not_held(self):
+        SA.set_password("blancco", PW)
+        env = {"SHARE_SEED_PXE_UPLOAD": "Seed-Upload-1", "SHARE_SEED_BLANCCO": "Seed-Blancco-1",
+               "SHARE_SEED_CLONEZILLA": "clonezilla-backup"}
+        with mock.patch.dict(os.environ, env):
+            self.assertEqual(SA.seed_from_env(), ["pxe-upload"])
+        cur = SA.load()
+        self.assertEqual((cur["pxe-upload"], cur["blancco"], cur["clonezilla"]),
+                         ("Seed-Upload-1", PW, "clonezilla-backup"))
+        with mock.patch.dict(os.environ, {"SHARE_SEED_CLONEZILLA": "bad pw"}):
+            with self.assertRaises(ValueError):
+                SA.seed_from_env()
+
+    def test_cli_apply_seed(self):
+        with mock.patch.dict(os.environ, {"SHARE_SEED_CLONEZILLA": "Seed-Clone-1"}):
+            self.assertEqual(SA.main(["apply", "--seed"]), 0)
+        self.assertIn("smb3://clonezilla:Seed-Clone-1@", self.menu())
+        self.assertEqual(self.smb.call_count, 3)
+
+    def test_failure_after_store_is_reported_as_such(self):
+        self.smb.side_effect = RuntimeError("smbpasswd pxe-upload failed: no such user")
+        with self.assertRaises(SA.ApplyFailed):
+            SA.set_password("pxe-upload", PW)
+
+    def test_no_server_files_yet(self):
+        os.remove(config.BOOT_WIM)
+        os.remove(BU.menu_path())
+        os.remove(os.path.join(BU.blancco_root(), "config.img"))
+        done = SA.apply()
+        self.assertTrue(any("skipped" in d for d in done))
+
+
+class StartnetPinning(Fixture):
+    def setUp(self):
+        super().setUp()
+        self.c = A.app.test_client()
+        html = self.c.get("/startnet").get_data(as_text=True)
+        self.tok = re.search(r'name="csrf-token" content="([^"]+)"', html).group(1)
+
+    def test_editor_save_cannot_bring_back_an_old_password(self):
+        SA.set_password("pxe-upload", PW)
+        old = startnet_text()  # carries SHAREPASS=pxe, like an old snapshot
+        r = self.c.post("/startnet/save", data={"content": old, "_csrf_token": self.tok})
+        self.assertIn(r.status_code, (200, 302))
+        self.assertRegex(self.startnet(), r"(?m)^set SHAREPASS=%s\r$" % re.escape(PW))
+
+    def test_new_menu_block_uses_the_variables(self):
+        blk = wim._synth_block({"target": "x", "target_image": "gea-x", "label": "X"}, "172.16.9.1")
+        self.assertIn(r"net use Z: \\172.16.9.1\winpeapps\gea-x /user:%SHAREUSER% %SHAREPASS% /persistent:no", blk)
+
+
+class Page(Fixture):
+    def setUp(self):
+        super().setUp()
+        self.c = A.app.test_client()
+
+    def tok(self):
+        html = self.c.get("/tools/share-accounts/").get_data(as_text=True)
+        return re.search(r'name="csrf-token" content="([^"]+)"', html).group(1)
+
+    def test_page_and_save(self):
+        r = self.c.get("/tools/share-accounts/")
+        self.assertEqual(r.status_code, 200)
+        html = r.get_data(as_text=True)
+        for a in SA.ACCOUNTS:
+            self.assertIn(a, html)
+        self.assertIn("Default password", html)
+        tok = self.tok()
+        r = self.c.post("/tools/share-accounts/clonezilla",
+                        data={"password": PW, "confirm": PW, "_csrf_token": tok}, follow_redirects=True)
+        html = r.get_data(as_text=True)
+        self.assertIn("clonezilla password changed", html)
+        self.assertNotIn(PW, html)
+        self.assertIn(f"clonezilla:{PW}@", self.menu())
+
+    def test_mismatch_and_bad_password(self):
+        tok = self.tok()
+        r = self.c.post("/tools/share-accounts/blancco",
+                        data={"password": PW, "confirm": PW + "z", "_csrf_token": tok}, follow_redirects=True)
+        self.assertIn("differ", r.get_data(as_text=True))
+        r = self.c.post("/tools/share-accounts/blancco",
+                        data={"password": "bad", "confirm": "bad", "_csrf_token": tok}, follow_redirects=True)
+        self.assertIn("not changed", r.get_data(as_text=True))
+        self.assertEqual(SA.load()["blancco"], "blancco")
+        self.smb.assert_not_called()
+
+    def test_csrf_required(self):
+        r = self.c.post("/tools/share-accounts/blancco", data={"password": PW, "confirm": PW})
+        self.assertIn(r.status_code, (400, 403))
+        self.assertEqual(SA.load()["blancco"], "blancco")
+
+
+if __name__ == "__main__":
+    unittest.main()

webapp/views/blancco_update.py

@@ -45,14 +45,16 @@ def page():
 @bp.route("/site-settings", methods=["POST"])
 def site_settings():
     """Business location and licensing Wi-Fi: saved, then the served
-    preferences.xml is rendered again. The password is never shown back."""
+    preferences.xml and the live config.img are written again. The password
+    is never shown back."""
     try:
         with bu._lock:
             blancco_prefs.save(request.form.get("business_location", ""),
                                request.form.get("wifi_ssid", ""),
                                request.form.get("wifi_password", ""))
-            changed = blancco_prefs.render()
+        # Served preferences.xml and the live config.img (BIOS path).
-    except (OSError, ValueError) as e:
+        changed = bu.refresh_live_prefs()
+    except (OSError, ValueError, bu.StageBlocked) as e:
         flash(f"Blancco site settings not saved: {e}", "danger")
         return _back()
     s = blancco_prefs.public()

webapp/views/share_accounts.py

@@ -0,0 +1,43 @@
+"""Tools > Share accounts: the Samba passwords the imaging clients use
+(pxe-upload, blancco, clonezilla). Logic in services/share_accounts.py."""
+
+from flask import Blueprint, flash, redirect, render_template, request, url_for
+
+from services import share_accounts as sa
+from services.audit import audit
+
+bp = Blueprint("share_accounts", __name__, url_prefix="/tools/share-accounts")
+
+USED_BY = {
+    "pxe-upload": "WinPE and Shop Floor setup on every imaging PC; image and app uploads",
+    "blancco": "Blancco saving erasure reports to the blancco-reports share",
+    "clonezilla": "Clonezilla back up and restore (in the PXE boot menu)",
+}
+
+
+@bp.route("/")
+def page():
+    return render_template("share_accounts.html", accounts=sa.public(), used_by=USED_BY,
+                           busy=sa.busy(), rule=sa.PASSWORD_RULE)
+
+
+@bp.route("/<account>", methods=["POST"])
+def save(account):
+    pw = request.form.get("password", "")
+    if pw != request.form.get("confirm", ""):
+        flash(f"{account}: the two passwords differ; nothing changed.", "danger")
+        return redirect(url_for("share_accounts.page"))
+    force = request.form.get("force") == "1"
+    try:
+        done = sa.set_password(account, pw, force=force)
+    except sa.ApplyFailed as e:
+        audit("SHARE_PASSWORD_FAILED", f"{account}: {e}")
+        flash(f"{account} password stored, but applying it failed: {e}. "
+              "Fix the cause and save it again.", "danger")
+        return redirect(url_for("share_accounts.page"))
+    except (ValueError, RuntimeError, OSError) as e:
+        flash(f"{account} password not changed: {e}", "danger")
+        return redirect(url_for("share_accounts.page"))
+    audit("SHARE_PASSWORD", f"{account}{' (while PCs were imaging)' if force else ''}: " + "; ".join(done))
+    flash(f"{account} password changed. " + "; ".join(done) + ".", "success")
+    return redirect(url_for("share_accounts.page"))