- winpe-status-push.ps1: check-bios.cmd stages the firmware update before
the imaging menu, but startnet's 'BIOS firmware update' push only comes
at the end of WinPE, so builds showed a plain 'Applying image' for the
whole apply. The first push now reports the staged update when
X:\bios-fired.flag exists, and the floor shows 'Applying image - BIOS
update staged' (do not power off during the next reboot). Also: CIM
fallback for the serial where wmic is missing, and standard/engineer
always report 5 steps.
- Network pill: cdc_ncm (e.g. the WisdPI RTL8157 5G adapter) keeps link
speed in a 32-bit bits/s field, so 5 Gb/s reads 705 Mb/s; show the real
speed with a note.
Tested in the win11 VM (with and without the BIOS flag, and the late
startnet push).
The floor's 8 stages are the shopfloor pipeline, and only shopfloor-setup
reports after WinPE, so every gea-standard / gea-engineer build sat at
1/8 forever with no type.
- winpe-status-push.ps1 reads the image from the Z: share mapping when no
PCTYPE is set and reports those builds as 5 steps.
- Send-ImagingStage.ps1 (deployed to _shared\Applications\extra\pxe-status)
posts steps 2-5 from the unattend: start and end of specialize, first
logon, and setup complete (succeeded). It is copied to
C:\ProgramData\PxeStatus first, because the bulk-enrollment task deletes
C:\Deploy before first logon. Best-effort: always exits 0.
- Floor rows use Standard/Engineer labels and show the image as the kind.
Tested as SYSTEM in the win11 VM (PowerShell 5.1): the exact unattend
command line, stages 3-5 against a test server, a dead port (exit 0), and
the image regex.
From the design review:
- Floor rows reserve 150px for actions instead of 190px; stage text is
one line with the full text in a tip (safety text still wraps); the PC
type hides first; rows stack only below 960px of panel width, with the
actions on the status line instead of their own row.
- Tips also show on keyboard focus.
- Placeholders use the muted token (dark-theme contrast was 3.6:1).
- Save bar focus ring uses the save bar's accent (2.8:1 before).
Blocker
- /reports/export returned 500: REPORT_EXPORT_RANGES and _months_ago were
deleted with the old reports route. Restored.
Major
- A session without stage_index/stage_total took down /, /imaging and
/imaging/tiles (int filter on Undefined). The templates default both;
saving a LAPS password for a session that no longer exists is refused
(it created a bare session).
- /reports/todo parsed every report four times (23 s at 700 reports).
blancco_report.parse() now caches by path, mtime and size: 0.09 s.
- Stored XSS through the session serial in the Clear confirm (the
browser decodes ' before running an inline handler). The message
moves to data-confirm, and update_session() only accepts serials of
letters, digits, '.', '_' and '-' (400 from /imaging/status otherwise).
- Reports without a document id and with odd characters in the file name
got a key the mark routes rejected, so they could never be cleared.
report_key() now always produces a valid key.
Minor
- failure_note() handles a list-valued erasure target (500 on the report
and to-do pages).
- _recently_marked() tolerates naive, 'Z' and non-dict state entries.
- Key regexes use fullmatch (a trailing newline was accepted).
- Unreadable reports are no longer counted as to tick / to destroy; the
reports page already flags them as Unreadable.
- Rollback review recounts restorable files after reading the backups.
- Enrollment: the startnet fallback package (no or empty ppkg.conf) and a
quoted SOURCE_PPKG are protected too.
- Backup upload overwrite check is case-insensitive (SMB share) and
replaces the existing file rather than adding a case twin.
- Overview polling keeps the last good rows on an error and pauses while
the tab is hidden. A shown or typed LAPS password survives the floor's
refresh.
- hardware_dismiss only redirects to same-site paths; tiles ?limit is
clamped; the Updates overview survives an unreadable Dell scan or iPXE
state; describe() uses aversion(); a client cannot label its session
'inferred'.
Imaging floor (/imaging, /imaging/tiles):
- One line per PC: status chip, serial with machine number, hostname
and IP, stage text with a segmented stage track, one action plus a
'...' menu. Everything else (description, error, timestamps, Intune
ID + QR, Set category / ARTS links, LAPS QR, log tail) is in the row's
expandable body.
- Order: failed, needs action (stage 7), in progress, done; log-only
bays fold into one collapsed group. imaging_status.floor_state() and
floor_order() compute this.
- Status filter buttons with live counts next to the text filter. SSE
refresh, expanded-row memory and LAPS handling are unchanged.
- Stage text is never truncated; BIOS updates and erasing are bold.
Overview (/):
- Services popover, technician to-do line, the six most urgent floor
rows (?limit=6 partial, refreshed every 15 s), and image cards with
lint warnings, map errors and missing zips as separate chips. New,
clone, delete and unattend stay on the cards' menus.
Copy buttons are now handled once in static/app.js, with a fallback for
plain-http pages where navigator.clipboard is unavailable.
- Report view: the hero summarised only the first erasure, so a drive whose
Purge failed and Clear fallback succeeded showed Failed while the list said
Successful. It now uses the per-drive outcome (report_result) and lists the
standards that wiped each drive.
- To-do and ServiceNow: reports with no usable document id could never be
ticked or cleared (400). They are now tracked by file name (file:<name>).
- Imaging: the LAPS password field is masked, with a Show/Hide toggle.
- Imaging: succeeded sessions not updated for ACTIVE_WINDOW_HOURS are hidden
from the dashboard (failed and in-progress always stay), with Show all.
- Enrollment: the active SFLD package can no longer be deleted, which left
ppkg.conf pointing at a missing file; its row is marked Active.
- Import: confirm before importing, saying upload-folder sources are moved
and same-name files in the image are overwritten.
Webapp: config.DISPLAY_TZ (default America/New_York) and a local_dt
filter that renders datetimes, ISO strings and Unix timestamps as e.g.
"2026-10-05 13:54 EDT", DST included. Used for the ServiceNow tick list,
technician to-do, imaging tiles and detail page; timestamp_fmt (reports,
backups, enrollment) goes through it too instead of relying on the
process TZ. CSV report_date is Eastern with its offset. Evidence-pack
months are Eastern calendar months, so a wipe late on the 31st lands in
that month rather than the next.
Blancco: init points the new root's /etc/localtime at America/New_York
so the GUI clock is local. Report timestamps keep their explicit
offset; report.utc_offset stays 0 since a fixed offset cannot follow DST.
Report file names stay UTC, as Blancco's own Save names them.
Each SSE/poll refresh replaces the tiles' HTML, so the nested Log tail
<details> snapped shut on every update while a wipe was running. Its
open state is now remembered per tile in localStorage like the tile
itself, and its scroll position is kept: following the bottom keeps
following new lines, scrolled up stays put.
Sessions with source/pctype "blancco" (posted by blancco-init.sh and
blancco-progress.py) now render with their own stage labels
(Downloading, Starting, Licensing, Erasing, Erasure finished, Report
sent, Wipe complete; Erasure FAILED on failure), a WIPE badge with the
drive percentage instead of "no DeviceId", the current step beside the
stage, and an Erasure reports link. The drive percentage is folded into
the bar across stage 4. The LAPS QR card is hidden for Blancco tiles.
Also render the bar percentage as an integer: round() returns a float,
so every tile showed e.g. "57.0%".
Adopt the shopdb-flask visual language across the PXE webapp (presentation only, Flask/Jinja logic unchanged):
- New static/pxe-theme.css: GE Aerospace palette (atmosphere-blue sidebar, sky-blue primary, avionics-green), Inter font stack, light/dark theming via data-theme + localStorage (key pxe-theme) with system-pref fallback, and card/button/table/form/badge/alert component styles layered over Bootstrap.
- base.html: shopdb-style sidebar (logo + title, nav sections, footer light/dark toggle) + theme boot script.
- All 13 content templates restyled to the new page-header + card/table/badge vocabulary; unattend_editor grouped per unattend-UX research.
- Fixed a pre-existing CRITICAL bug found during review: nested <form>s in image_config.html made Adopt submit the delete form and Delete-selected post every orphan filename regardless of checkboxes; split into standalone forms wired via the form= attribute.
Built by a Fable-orchestrated Opus workflow (17 agents). All 14 templates parse clean under Jinja2.
Imaging dashboard
- services/imaging_log_tail.py: parses dnsmasq leases, Apache access log,
Samba per-host log files, and dnsmasq syslog (DHCP/TFTP). Synthesizes
inferred sessions keyed by MAC for bays that have only touched the boot
chain but not yet pushed to /imaging/status. Active window 90 min.
- imaging_status.list_sessions() merges inferred sessions into the dashboard
list. Real client-pushed sessions win for the same MAC.
- imaging_status: stage_history field tracks every stage transition (capped
30); sidecar .log file per serial records every log_lines push uncapped
(read_full_log() caps detail-page response to 1 MB).
- delete_session/delete_all_sessions clean up sidecar .log too.
- New SSE endpoint /imaging/stream emits a session-list hash every 5s.
Client fetches /imaging/tiles (HTML partial) on hash change and swaps
#imaging-tiles innerHTML. Polling fallback at 15s if SSE drops.
- Tile-swap preserves scroll, filter input, expanded state via localStorage,
and any LAPS input the operator is mid-pasting (swap skipped when a
laps-input is focused).
- imaging.html: removed 15s location.reload(). Added live-status dot in
header (gray idle / green SSE connected / red SSE lost).
- _imaging_tiles.html: shared partial used by both /imaging full render and
/imaging/tiles SSE refresh. Inferred bays render with yellow border +
log-inferred badge + no progress bar (stage_index inference is coarse).
- imaging_detail.html (new): per-bay forensics page at /imaging/session/
<serial>. Session metadata grid, stage timeline table, full sidecar log
with truncation indicator, Copy-support-summary button. Linked from each
client-pushed tile.
- qr-render.js exposes window.renderAllQRs() so the SSE swap can re-render
Intune device-ID QRs in the swapped-in tiles.
Image management
- services/image_registry.py: JSON registry of image types at
{SAMBA_SHARE}/image-registry.json. Bootstraps from baked-in
config.IMAGE_TYPES on first run. create/clone/delete/rename_friendly
mutate the file then call reload() which rewrites config.IMAGE_TYPES +
config.FRIENDLY_NAMES in place. Sidebar reflects on next request.
- app.py routes: /images/new, /images/<t>/clone, /images/<t>/delete (with
optional content-wipe checkbox), /images/<t>/rename.
- dashboard.html: + New image type button + Clone/Delete per row, all in
Bootstrap modals with confirmation copy.
- Clone copies Deploy/ tree but preserves symlinks to shared dirs (Out-of-
box Drivers, Operating Systems, Packages) so disk usage stays low.
- Delete with content checked unlinks symlinks (does not follow into shared
dirs).
Driver / package upload + orphan adoption
- services/images.py: upload_driver, adopt_orphan, remove_orphans,
upload_package. Filename sanitization blocks path traversal.
- app.py routes: /images/<t>/drivers/upload, /images/<t>/drivers/adopt,
/images/<t>/drivers/orphans/delete, /images/<t>/packages/upload.
- image_config.html: Upload .zip button + modal on Drivers section. Orphan
drivers card-footer rebuilt as interactive list with per-row Adopt inline
form (family + destinationDir inputs) and bulk select+delete.
- Upload .zip on Packages section with optional destinationDir field that
appends a packages.json entry.
Configuration
- config.py: new env vars DNSMASQ_LEASES, APACHE_ACCESS_LOG, SAMBA_LOG_DIR,
DNSMASQ_SYSLOG for the log-tailer.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
