New /imaging/delete_all endpoint wipes every per-bay JSON in IMAGING_DIR
via imaging_status.delete_all_sessions(). Template adds "Clear all"
outline-danger button next to the count badge, gated on sessions list
non-empty, with confirm() prompt naming the count.
Deployed via scp + systemctl restart pxe-webapp on 172.16.9.1.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Previously the stage indices reflected logical milestones but not the
order they fire in. Run-ShopfloorSetup posted idx=1 (start) and idx=4
(PPKG) - but 09-Setup-Keyence (inside per-type loop) ran BETWEEN them
and posted idx=5/6. The dashboard then "regressed" from 6 back to 4
when PPKG fired, making it look stuck at the per-type-complete card.
New numbering matches actual execution order:
1 - WinPE: PESetup / WIM apply (startnet.cmd)
2 - Run-ShopfloorSetup: starting (Run-ShopfloorSetup.ps1)
3 - 09-Setup-<Type>: starting (per-type)
4 - 09-Setup-<Type>: complete (per-type)
5 - Run-ShopfloorSetup: PPKG enrollment (Run-ShopfloorSetup.ps1)
6 - Run-ShopfloorSetup: handoff to Monitor (Run-ShopfloorSetup.ps1)
7 - Monitor-IntuneProgress: Intune Device ID captured
services/imaging_status.py rewind threshold reverts to stage_index <= 1
now that WinPE startnet posts idx=1.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Reset trigger previously fired only when a new POST landed at idx <= 1,
which meant a reimage didn't reset the dashboard card until
Run-ShopfloorSetup ran post-PPKG (~10-20 min in). With the WinPE-phase
status push from startnet.cmd in commit 4e018fe firing at idx=2, that
earlier signal needs to count as a new-run marker too.
Threshold of 2 makes startnet.cmd the canonical reset point: within
seconds of PXE menu choice on the bay, the dashboard card flips from
the previous run's high-idx state back to "WinPE: PESetup / WIM apply"
+ fresh started_at.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
services/imaging_status.py - if a new POST arrives with stage_index <= 1
that is lower than the cached stage_index, OR the previous run already
finished (status=succeeded|failed), reset the session: clear log_tail,
mint a fresh started_at, drop the status field so the in_progress
default re-applies. Preserves serial + records the previous run's
last_updated under previous_run_at for audit. Without this, a reimage
on the same bay would leave a stale 6/8 "succeeded" card visible until
the new run progressed past that index.
playbook/startnet.cmd - one-line PowerShell POST after the PXE menu
choice + enrollment-share mount, before PESetup.exe waits to start.
Captures BIOS serial via wmic, MAC via Get-NetAdapter, and posts:
stage_index=2, current_stage="WinPE: PESetup / WIM apply".
Best-effort; try/catch swallows any network failure so a missing
webapp never blocks imaging. PXE clients will now appear on the
/imaging dashboard during WinPE phase instead of only post-PPKG.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Adds end-to-end progress tracking for PXE imaging sessions and surfaces
each Blancco report's BIOS serial in the report list.
webapp:
* services/imaging_status.py - JSON-per-serial state store under
IMAGING_DIR (default /var/log/pxe-imaging). Atomic write via
tempfile + rename. log_tail capped at 50 lines. Merges partial
updates so clients can post just the current_stage tick.
* config.py - new IMAGING_DIR env-overridable path.
* services/csrf.py - explicit exempt list for machine-to-machine
endpoints; /imaging/status is the first entry. Air-gapped LAN;
trust-by-network for client posts.
* app.py - four new routes:
GET /imaging dashboard (renders all sessions)
POST /imaging/status client status push (JSON body)
GET /imaging/<serial>.json raw session JSON for ad-hoc polling
POST /imaging/delete/<s> clear a session from the dashboard
Also parses each Blancco XML in the /reports list to surface
system.serial + system.model columns.
* templates/imaging.html - Bootstrap dashboard with per-session
cards (state badge, progress bar, stage idx/total, mac, elapsed,
log tail). meta http-equiv refresh=5 for auto-tick.
* templates/base.html - new "Imaging Progress" nav entry.
* templates/reports.html - Serial + Model columns added.
playbook:
* shopfloor-setup/Shopfloor/lib/Send-PxeStatus.ps1 - new helper.
Dot-source this then call Send-PxeStatus -Stage X -StageIndex N
-StageTotal M from any stage script. BIOS serial via CIM, MAC via
Get-NetAdapter, pctype + machinenumber from C:\Enrollment.
Failures are swallowed to a local log so a network blip doesn't
block imaging.
* shopfloor-setup/Run-ShopfloorSetup.ps1 - dot-sources helper +
posts at three coarse milestones (start, PPKG enrollment,
handoff to Monitor-IntuneProgress).
* shopfloor-setup/gea-shopfloor-keyence/09-Setup-Keyence.ps1 -
posts at session start + after Install-FromManifest with
succeeded/failed status derived from $rc. Other 09-Setup-*.ps1
scripts can follow the same pattern.
ID is BIOS serial (stable across WinPE -> Windows transition and
across reboots, unlike hostname which is random pre-PPKG). Operator
already knows the serial of the bay they imaged.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
