- Register-MapSfldShare.ps1: swap scheduled task for HKLM\Run entry. Task with -GroupId runs in session 0 with no HKCU, so /persistent:yes fails and the drive mapping isn't visible to Explorer. Run key fires at Explorer startup in the interactive user's session with full token + HKCU. Unregisters legacy 'GE Shopfloor Map S: Drive' task for PCs already imaged.
- Run-ShopfloorSetup.ps1: stop bumping AutoLogonCount (99 at start, 4 at end). Windows decrements per-logon and at 0 clears AutoAdminLogon + DefaultPassword, which nukes the lockdown-configured ShopFloor autologon. Re-enable-wired-NICs task now gates on Autologon_Remediation.log 'Autologon set for ShopFloor' instead of SFLD creds, so wired stays off through the whole Intune+DSC+lockdown chain.
- Monitor-IntuneProgress.ps1: Phase 4 treats 'no custom scripts' as COMPLETE when DSC install is done (was WAITING, which stalled the state machine on PC types without scripts). Push retrigger out to 15min when entering lockdown-wait so a stale 5min retrigger doesn't fire mid-Remediation. Removed the AutoLogonCount delete in Invoke-SetupComplete since we no longer set it.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
AutoLogonCount depletion:
Run-ShopfloorSetup set AutoLogonCount=4 for SupportUser. Windows
decrements per-logon; at 0 it clears AutoAdminLogon + DefaultPassword,
nuking the lockdown-configured ShopFloor autologon. Fix: delete
AutoLogonCount in Invoke-SetupComplete before the lockdown reboot.
ShopFloor's Autologon.exe-set config persists indefinitely.
Sync_intune window on ShopFloor:
The marker-check path used 'exit 0' but the task runs with -NoExit,
leaving a dangling PowerShell window on every ShopFloor logon. Fix:
[Environment]::Exit(0) kills the host outright, defeating -NoExit.
S: drive mapping:
Vendor ConsumeCredentials.ps1 calls New-StoredCredential -Persist
LocalMachine (needs admin) before net use. ShopFloor is non-admin so
cred-store fails silently and net use has no auth. Fix: new
Map-SfldShare.ps1 reads HKLM creds and passes them inline to
net use /user: -- no Credential Manager needed, works as Limited.
Register-MapSfldShare updated to stage + reference our script.
Wired NIC re-enable:
SYSTEM task polls for SFLD creds (Phase 5), re-enables wired NICs,
self-deletes. Replaces the broken Enable-NetAdapter in Monitor
(Limited principal can't enable NICs). No-WiFi devices unaffected
(migrate-to-wifi never disables, re-enable is a no-op).
Sync throttle:
15 min retrigger when only waiting for lockdown (was 5 min for all
phases). Avoids interrupting the Intune Remediation script.
Defect Tracker path:
All references corrected to C:\Program Files (x86)\WJF_Defect_Tracker.
QR code retry:
Build-QRCodeText retried every poll cycle until DeviceId appears
(was single-shot that could miss the dsregcmd timing window).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Replaces the Acrobat-only enforcer with a generic Common-Enforce that
handles all cross-PC-type apps from one manifest + one scheduled task
on the SFLD share at \\tsgwp00525\shared\dt\shopfloor\common\apps\.
Renames:
Acrobat-Enforce.ps1 -> Common-Enforce.ps1
Register-AcrobatEnforce -> Register-CommonEnforce
acrobat-manifest.json -> common-apps-manifest.json
common.acrobatSharePath -> common.commonAppsSharePath
'GE Acrobat Enforce' task -> 'GE Common Apps Enforce' task
C:\Program Files\GE\Acrobat -> C:\Program Files\GE\CommonApps
Register-CommonEnforce cleans up the legacy 'GE Acrobat Enforce' task
if present from a prior image.
WJF Defect Tracker (replaces ClickOnce):
- Added to preinstall.json (PCTypes=*, fleet-wide imaging-time install)
- MSI staged on PXE at pre-install/installers/
- Added to common-apps-manifest with FileVersion detection on
C:\Program Files\WJF_Defect_Tracker\Defect_Tracker.exe
- site-config + 06-OrganizeDesktop: shortcut changed from ClickOnce
'existing' to exe-path pointing at the MSI-installed binary
- Update workflow: drop new MSI on share, bump DetectionValue
CMM 09-Setup-CMM: added goCMM + DODA to the ACL grant list.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Force-Lockdown.bat (SupportUser desktop):
Vendor escape hatch when Intune Lockdown push hasn't applied within
~30 minutes. Self-elevates via UAC, prompts for typed YES confirmation
that an ARTS request is in place, then runs sfld_autologon.ps1.
Register-MapSfldShare.ps1 (every PC type):
The SFLD vendor's 'SFLD - Consume Credentials' scheduled task is
principal-restricted (admin-only) so it fires for SupportUser logon
but not for ShopFloor logon -- ShopFloor lands at the desktop with
no S: drive and no way to reach \\tsgwp00525\shared. Workaround:
register a parallel 'GE Shopfloor Map S: Drive' AtLogOn task with
Principal=BUILTIN\Users + RunLevel=Limited that invokes the vendor's
C:\ProgramData\SFLD\CredentialManager\ConsumeCredentials.ps1 in the
interactive user's session. Vendor script handles cred-store + net use
end to end; we just give it a wider trigger principal. Cross-PC-type
because every shopfloor account needs S:.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Reason: Intune DSC's main-category YAML was pushing these to every main
device, including Timeclocks - DSC has no awareness of our pc-subtype
distinction. After UDC/eDNC/NTLARS are removed from the DSC YAML, ongoing
version drift would no longer be corrected. This enforcer replaces that,
scoped correctly by subtype.
Structure mirrors CMM (CMM-Enforce.ps1) and common (Acrobat-Enforce.ps1):
- Machine-Enforce.ps1: SYSTEM logon task; mounts SFLD share with HKLM-
backed creds; hands off to Install-FromManifest.
- machineapps-manifest.template.json: repo reference; authoritative copy
lives on the share at \\tsgwp00525.wjs.geaerospace.net\shared\dt\
shopfloor\main\machineapps\machineapps-manifest.json.
- Register-MachineEnforce.ps1: idempotent setup; stages scripts to
C:\Program Files\GE\MachineApps and registers the task.
- lib/Install-FromManifest.ps1: copy of the common/ version (already has
Type=CMD support).
Sub-type gating belt-and-suspenders:
- Run-ShopfloorSetup.ps1 only calls Register-MachineEnforce when
$pcType -eq "Standard" -and $pcSubType -eq "Machine".
- Machine-Enforce.ps1 itself re-reads pc-subtype.txt and exits early if
not "Machine", so a mistakenly-deployed copy no-ops.
site-config.json:
- Added "machineappsSharePath" to Standard-Machine pcProfile.
Drive letter U: to stay clear of CMM (S:) and Acrobat (T:) enforcers
that may run concurrently at logon.
Update workflow:
drop new UDC/eDNC/NTLARS installer on the SFLD share,
bump DetectionValue in machineapps-manifest.json,
every Machine PC catches up on next user logon.
Acrobat Reader enforcement:
- playbook/shopfloor-setup/common/ is the cross-PC-type staging dir. Mirrors
CMM/ structure (enforce script + its Install-FromManifest copy + manifest
template + register script).
- Acrobat-Enforce.ps1 runs as SYSTEM on every logon, reads
acrobatSharePath from site-config.common, mounts the SFLD share with
the same HKLM-backed credential lookup CMM-Enforce uses, hands the
acrobat-manifest.json from the share to Install-FromManifest.
- Install-FromManifest extended with Type=CMD so it can invoke vendor-
supplied .cmd wrappers (Install-AcroReader.cmd does a two-step MSI+MSP
install that does not fit MSI/EXE types cleanly). cmd.exe /c wraps it
because UseShellExecute=false cannot launch .cmd directly.
- Register-AcrobatEnforce.ps1 stages scripts to C:\Program Files\GE\Acrobat
and registers "GE Acrobat Enforce" scheduled task. Called from
Run-ShopfloorSetup.ps1 right before the enrollment (PPKG) step so it
applies to every PC type, not just CMM.
- acrobat-manifest.template.json is the repo reference; the authoritative
copy lives on the SFLD share at
\\tsgwp00525.wjs.geaerospace.net\shared\dt\shopfloor\common\acrobat\
Bumping Acrobat updates = drop new MSP on share, bump DetectionValue in
manifest; enforcer catches every PC on next logon.
- site-config.json: add "common": { "acrobatSharePath": ... }. Uses a
new top-level block rather than a PC-type-specific one since Acrobat
applies everywhere.
Initial install still happens via the preinstall flow
(Install-AcroReader.cmd during WinPE). The enforcer is the ongoing-
updates side; on a freshly-imaged PC detection passes and it no-ops.
Also in this commit:
- run-enrollment.ps1: provtool.exe argument syntax fix. First test
returned 0x80004005 E_FAIL in 1s because /ppkg: and /log: are not
valid provtool flags; the cmdlet's internal call used positional
path + /quiet + /source. Switched to that syntax.
Rolls up everything from the CMM imaging test iteration tonight. No
single concern - several small, related polish items on the option-3
patched-MSI pipeline and the shopfloor-setup / sync_intune handoff.
- Rename all type-specific "01-Setup-<Type>.ps1" scripts to
"09-Setup-<Type>.ps1" across CMM, Display, Genspect, Keyence, Lab,
and WaxAndTrace. The "01-" prefix implied the script runs first in
the overall sequence when it actually runs between baseline (00, 04)
and finalization (06, 07). Logs now read "Running CMM setup:
09-Setup-CMM.ps1" which matches the real position. Standard/
01-eDNC.ps1 + 02-MachineNumberACLs.ps1 left alone - those digits
represent real within-type ordering.
- playbook/shopfloor-setup/site-config.json CMM profile updates:
- startupItems = [] (empty). Previously had WJ Shopfloor auto-launch
which the user does not want on CMM workstations. Now relies on
the Get-ProfileValue empty-array fix to not fall through to site
defaults.
- desktopApps + taskbarPins gain entries for PC-DMIS 2016, PC-DMIS
2019 R2, CLM Admin, and goCMM so 06-OrganizeDesktop Phase 2
materializes them into C:\\Users\\Public\\Desktop\\Shopfloor Tools\\
and 07-TaskbarLayout pins them. goCMM is under C:\\Program Files
(x86)\\General Electric\\goCMM\\ (GE product, not Hexagon).
- playbook/shopfloor-setup/Run-ShopfloorSetup.ps1: remove the blocking
"UNPLUG ethernet cable, press any key" prompt + the interactive
wired-NIC re-enable. The whole prompt block was a hard blocker on
the imaging chain that required a human to walk to each PC.
- playbook/shopfloor-setup/Shopfloor/lib/Monitor-IntuneProgress.ps1:
re-enable wired NICs unconditionally at the top of the transcript.
This is the new home for the re-enable that used to live behind the
prompt in Run-ShopfloorSetup. By the time sync_intune fires (after
PPKG reboot + auto-login + Stage-Dispatcher), the tech has had
minutes of wall-clock time to physically rewire from PXE to
production without us blocking on a keypress. Tower case is a
no-op because migrate-to-wifi.ps1 already left wired enabled.
- Internal comment updates in 09-Setup-CMM.ps1, cmm-manifest.json,
Install-FromManifest.ps1, and startnet.cmd (+ startnet-template)
to reflect the new filename.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Install-ProvisioningPackage triggers an immediate reboot that kills
run-enrollment.ps1 before it can register the sync_intune task or do
any post-install work. BPRT app installs happen on the NEXT boot, not
before the reboot.
Fix: move sync task registration into Run-ShopfloorSetup.ps1, executed
BEFORE calling run-enrollment.ps1. The task is safely registered while
we still have control. Then enrollment installs the PPKG and lets it
reboot. After reboot, BPRT finishes in background, sync task fires at
logon, monitors Intune enrollment (which is independent of BPRT).
Run-ShopfloorSetup.ps1:
- Registers "Shopfloor Intune Sync" @logon task after desktop tool
copies but BEFORE enrollment
- Flushes transcript before calling enrollment (since PPKG reboot
will kill us, ensures log is complete)
- Enrollment is the absolute last call
run-enrollment.ps1:
- Stripped to essentials: find PPKG, rename computer, set OOBE,
Install-ProvisioningPackage
- No BPRT polling (irrelevant - happens after reboot)
- No task registration (already done by caller)
- No shutdown call (PPKG handles it)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The imaging chain needs exactly 2 autologons after the first boot
(sync_intune pre-reboot + post-reboot). Setting to 4 adds 2 extra
reboots of margin for unexpected restarts from Windows Update, PPKG
file operations, or script crashes.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Em dashes (U+2014) and arrows (U+2192) break PowerShell 5.1 on
Windows when the file has no UTF-8 BOM -- byte 0x94 gets read as
a right double quote in Windows-1252, silently closing strings
mid-parse. This caused run-enrollment.ps1 to fail on PXE-imaged
machines with "string is missing the terminator" at line 113.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Two related fixes from the pipeline audit:
1. Stage-Dispatcher race condition (critical):
Run-ShopfloorSetup.ps1 called shutdown /r /t 10 and the dispatcher
had to write the next stage + register RunOnce within that 10-second
window. If disk I/O was slow, the reboot fired before RunOnce was
registered, and the chain broke.
Fix: dispatcher now cancels Run-ShopfloorSetup's pending reboot
(shutdown /a) immediately after it returns, then advances the stage
and registers RunOnce with no time pressure, then initiates its own
shutdown /r /t 5.
2. Dispatcher owns all reboots:
Run-ShopfloorSetup.ps1 now checks the -FromDispatcher flag at the
end. When called by the dispatcher, it schedules shutdown /r /t 30
as a safety net (the dispatcher cancels it immediately). When called
standalone (manual run or legacy FirstLogonCommands), it reboots
directly with /t 10 as before.
This means the dispatcher has full control over the reboot lifecycle:
cancel -> advance stage -> register RunOnce -> reboot. No racing.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The stage-file gate in Run-ShopfloorSetup.ps1 would fire even when
called by Stage-Dispatcher.ps1 (because the stage file still contains
"shopfloor-setup"), causing an infinite exit loop.
Fix: Run-ShopfloorSetup now accepts -FromDispatcher switch. The gate
only fires when the switch is absent (i.e. when called by the unattend's
FirstLogonCommands). Stage-Dispatcher passes -FromDispatcher when
invoking Run-ShopfloorSetup, bypassing the gate.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Run-ShopfloorSetup.ps1 now checks for C:\Enrollment\setup-stage.txt at
the very top. If the stage file exists (written by run-enrollment.ps1),
the script exits immediately with "deferring to Stage-Dispatcher.ps1
on next logon". This prevents the unattend's FirstLogonCommands chain
from running Run-ShopfloorSetup in the same session as run-enrollment,
which was bypassing the entire staged reboot chain.
Without this gate:
FirstLogonCommand #1: run-enrollment.ps1 (sets stage file + RunOnce)
FirstLogonCommand #2: Run-ShopfloorSetup.ps1 (runs immediately, ignoring stage)
PPKG reboot fires after both complete
Next boot: dispatcher has nothing to do (Run-ShopfloorSetup already ran)
With the gate:
FirstLogonCommand #1: run-enrollment.ps1 (sets stage file + RunOnce)
FirstLogonCommand #2: Run-ShopfloorSetup.ps1 (sees stage file, exits)
PPKG reboot fires
Next boot: RunOnce fires dispatcher, reads "shopfloor-setup", runs
Run-ShopfloorSetup properly (stage file deleted by gate on re-entry)
Also: Monitor-IntuneProgress.ps1 RetriggerMinutes bumped from 3 to 5.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
1. UDC JSON ACL: set on directory C:\ProgramData\UDC\ with
ContainerInherit+ObjectInherit instead of the file. UDC_Setup.exe
gets killed by KillAfterDetection before UDC.exe creates
udc_settings.json, so the file doesn't exist at ACL-grant time.
Directory-level ACL with inheritance covers any file created later.
2. Set-MachineNumber.ps1 auto-running: the type-specific loop's
Get-ChildItem -Filter "*.ps1" picked up the desktop tool alongside
the numbered installer scripts. Added Where-Object { $_.Name -match
'^\d' } so only numbered-prefix scripts (01-eDNC, 02-ACLs) run.
3. WJ Shopfloor copy-to-self: Phase 1 sweep moved WJ Shopfloor.lnk
into Shopfloor Tools\, then Phase 2's Find-ExistingLnk found it
there and tried to Copy-Item to the same path. Now checks if
resolved source path == destination and prints "exists: (already
in Shopfloor Tools)" instead of erroring.
4. NTLARS missing from taskbar pins: the $pinSpec entry was never
added to 07-TaskbarLayout.ps1 despite the comment update. Added
between eDNC and Defect_Tracker in pin order.
5. shutdown /a stderr noise: 15+ red "Unable to abort system shutdown"
lines in the transcript from shutdown.exe writing to stderr when no
shutdown is pending. Changed all occurrences in Run-ShopfloorSetup,
00-PreInstall-MachineApps to: cmd /c "shutdown /a 2>nul" *>$null
which suppresses both native stderr and PS error stream.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
New tools:
Configure-PC.bat/.ps1 - Interactive desktop tool for SupportUser to
configure a shopfloor PC after imaging. Two sections:
1. Machine number: if UDC/eDNC are still at placeholder 9999, prompt
to set the real number right now (updates UDC JSON + eDNC registry,
restarts UDC.exe with new args).
2. Auto-startup toggle: pick which apps start at user logon from a
numbered list (UDC, eDNC, Defect Tracker, WJ Shopfloor, Plant Apps).
Creates/removes .lnk files in AllUsers Startup folder. Toggle UI
shows [ON]/[ ] state, safe to re-run anytime. Plant Apps URL
resolved from .url file at runtime with hardcoded fallback to
https://mes-wjefferson.apps.lr.geaerospace.net/run/...
3. Item 6 in the toggle list: register/unregister a "Check Machine
Number" logon task for standard (non-admin) users. When enabled,
the task fires at every logon, checks for 9999, pops an InputBox
if found, updates both apps, then unregisters itself on success.
Check-MachineNumber.ps1 - The logon task script. Runs as the logged-in
user (needs GUI for InputBox), not SYSTEM. Writing to ProgramData + HKLM
is possible because 02-MachineNumberACLs.ps1 pre-grants BUILTIN\Users
write access on the two specific targets during imaging.
02-MachineNumberACLs.ps1 - Standard type-specific script (runs after
01-eDNC.ps1). Opens C:\ProgramData\UDC\udc_settings.json for Users:Modify
and HKLM:\...\GE Aircraft Engines\DNC\General for Users:SetValue. Narrow
scope, not blanket admin.
Execution order fixes in Run-ShopfloorSetup.ps1:
The dispatcher now has two lists: $skipInBaseline (scripts NOT run in the
alphabetical baseline loop) and $runAfterTypeSpecific (scripts run
explicitly after type-specific scripts complete). This fixes the bug where
06/07 ran before 01-eDNC.ps1 installed DnC, so eDNC/NTLARS shortcuts were
silently skipped.
New execution order:
Baseline: 00-PreInstall, 04-NetworkAndWinRM (skipping 05-08 + tools)
Type-specific: 01-eDNC, 02-MachineNumberACLs
Finalization: 06-OrganizeDesktop, 07-TaskbarLayout
06 internally calls 05 (Office shortcuts, Phase 0) and 08 (Edge config,
Phase 4) as sub-phases, so they also benefit from running late. Office
isn't installed until after the first reboot (ppkg streams C2R), so 05
no-ops at imaging time but succeeds when 06's SYSTEM logon task re-runs
it on the second boot. 08 resolves startup-tab URLs from .url files
delivered by DSC (even later); same self-heal via the logon task.
Other fixes in this commit:
- OpenText Setup-OpenText.ps1 Step 4: exclude WJ_Office.lnk, IBM_qks.lnk,
mmcs.lnk desktop shortcuts (matching the Step 3 .hep profile exclusion
from the previous commit). Removes stale copies from prior installs.
- 05-OfficeShortcuts.ps1: widened Office detection to 6 path variants
covering C2R + MSI + Office15/16, with diagnostic output on miss.
- 06-OrganizeDesktop.ps1: removed Phase 3 (desktop-root pin copies for
eDNC/NTLARS) so shortcuts live in Shopfloor Tools only, not duplicated
at root. Emptied $keepAtRoot. Added Phase 0 (call 05) and Phase 4
(call 08). Lazy folder creation + empty-folder cleanup. Scheduled task
now runs as SYSTEM (was BUILTIN\Users with Limited which failed the
admin check). Added NTLARS to 07's taskbar pin list.
- 08-EdgeDefaultBrowser.ps1: Plant Apps URL fallback hardcoded from
device-config.yaml.
- All new scripts have Start-Transcript logging to C:\Logs\SFLD\ with
timestamps and running-as identity.
- Run-ShopfloorSetup.ps1: Start-Transcript + Stop-Transcript wrapping
entire dispatcher run, writes to C:\Logs\SFLD\shopfloor-setup.log.
Configure-PC.bat added to SupportUser desktop copy list.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Replace em-dash characters with plain hyphens across the 5 shopfloor
setup scripts (avoids cp1252 mojibake in .bat files and keeps the
PowerShell sources consistent). Also adds [Parameter(Position=1)] to
Write-PreInstallLog so the Level argument can be passed positionally.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Adds a local-install pipeline so Standard shopfloor PCs get Oracle, the
VC++ redists (2008-2022), and UDC installed during PXE imaging via Samba
instead of pulling ~215 MB per device from Azure blob over the corporate
WAN. Intune DSC then verifies (already-installed apps are skipped) and
the only Azure traffic on the happy path is ~11 KB of CustomScripts
wrapper polling.
New files:
- playbook/preinstall/preinstall.json — curated app list with PCTypes
filter and per-app detection rules. Install order puts VC++ 2008
LAST so its (formerly) reboot-triggering bootstrapper doesn't kill
the runner mid-loop. (2008 itself now uses extracted vc_red.msi with
REBOOT=ReallySuppress; the reorder is defense in depth.)
- playbook/shopfloor-setup/Shopfloor/00-PreInstall-MachineApps.ps1 —
the runner. Numbered 00- so it runs first in the baseline sequence.
Reads preinstall.json, filters by PCTYPE, polls for completion via
detection check (handles UDC's hung WPF process by killing it once
detection passes), uses synchronous WriteThrough logging that
survives hard reboots, preserves log history across runs.
- playbook/shopfloor-setup/Standard/Set-MachineNumber.{ps1,bat} — desktop
helper for SupportUser. Reads current UDC + eDNC machine numbers,
prompts via VB InputBox, validates digits-only, kills running UDC,
edits both C:\ProgramData\UDC\udc_settings.json and HKLM\…\GE Aircraft
Engines\DNC\General\MachineNo, relaunches UDC. Lets a tech assign a
real machine number to a mass-produced PC without admin/LAPS.
- playbook/sync-preinstall.sh — workstation helper to push installer
binaries from /home/camp/pxe-images/main/ to the live PXE Samba.
Changes:
- playbook/startnet.cmd + startnet-template.cmd — add xcopy to stage
preinstall bundle from Y:\preinstall\ to W:\PreInstall\ during the
WinPE imaging phase, gated on PCTYPE being set.
- playbook/pxe_server_setup.yml — create /srv/samba/enrollment/preinstall
+ installers/ directories and deploy preinstall.json there.
- playbook/shopfloor-setup/Run-ShopfloorSetup.ps1 — bump AutoLogonCount
to 99 at start (defense against any installer triggering an immediate
reboot mid-dispatcher; final line still resets to 2 on successful
completion). Copy Set-MachineNumber.{ps1,bat} to SupportUser desktop
on Standard PCs.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- AutoLogonCount reduced from 2 to 1 in Run-ShopfloorSetup.ps1
- Remove default pinned Start Menu tiles and set blank layout for future users
- Add sync_intune.bat: triggers MDM sync and polls for SFLD group policies
- Update README.md and SETUP.md with current project state (boot chain, new
scripts, samba shares, webapp pages, commit history)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Fix check-bios.cmd: replace parenthesized if blocks with goto labels
(cmd.exe fails silently with if/else on network-mapped drives)
- Move BIOS check files to winpeapps/_shared/BIOS for reliable SMB access
- Add network wait loop before BIOS check in startnet.cmd
- Show firmware status in WinPE menu header (BIOS_STATUS variable)
- Add BypassNRO registry key to skip OOBE network requirement
- Refactor download-drivers.py with --parallel N flag (ThreadPoolExecutor)
- Set SupportUser AutoLogonCount to 3 in shopfloor unattend
- Add shutdown -a at start + shutdown /r /t 10 at end of Run-ShopfloorSetup.ps1
- Switch download-drivers.py from wget to curl for reliable stall detection
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
