Original used 'echo %BIOS_STATUS% | findstr /C:"->"' to detect whether
check-bios.cmd actually applied a firmware update. The '>' inside the
value (from check-bios writing e.g. 'updated 1.5.0 -> 1.6.0') gets
parsed by cmd.exe as a redirect operator BEFORE the pipe is set up.
Result: echo wrote a file named '1.6.0' in cwd instead of piping to
findstr. findstr saw no input, returned errorlevel=1, block never
fired. Plus a stray file got created in X:\Windows\System32.
Confirmed empirically in the win11 VM with test bat:
- echo|findstr approach: SKIPS even when '->' present (bug)
- substring-replace: FIRES iff '->' present (correct)
Fix: replace echo/pipe/findstr with a substring-replace test:
call set "BIOS_STATUS_STRIPPED=%%BIOS_STATUS:->=%%"
if not "%BIOS_STATUS%"=="%BIOS_STATUS_STRIPPED%" ( ... )
The '>' inside %VAR:->=...% is parsed as part of the substring
substitution token, not as a redirect. Yields true diff only when
the arrow was actually in BIOS_STATUS.
xcopy region was never impacted by the bug because subsequent
if-exist blocks didn't depend on the previous errorlevel state.
But the BIOS sub-stage push to the dashboard was silently broken.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
winpe-status-push.ps1 now accepts -CurrentStage / -StageIndex
params so callers can override the default "WinPE: PESetup / WIM
apply" string. Backwards compatible.
startnet.cmd: after the existing initial WinPE status push,
inspect $BIOS_STATUS for the "->" marker that check-bios.cmd
writes when an update was actually applied or staged. If present,
fire a second idx=1 push with stage="WinPE: BIOS firmware update -
<status>". No-op for clean "up to date" / "no update in catalog"
runs.
imaging.html: at stage_idx=1 with "bios" in current_stage, swap
friendly label to "Updating BIOS firmware" with a do-NOT-power-off
hint. Bays without firmware updates show the default "Booting from
PXE" label as before.
boot.wim startnet.cmd updated via wimupdate so live PXE clients
pick it up at next boot.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Single-site bay-stuck issue at WJ: GE Intune Report IP script filters
Get-NetIPAddress on StartsWith("10.") and posts everything matching
to the GE Tines webhook. Bays at WJ get the PXE LAN 10.9.100.x IP
captured and reported -> GE backend tags bays as on a non-corp 10.x
subnet -> dynamic group eligibility for SFLD policy never matches.
Other GE sites work because their PXE LANs aren't on 10.x at all.
Renumber PXE LAN to RFC1918 172.16.9.0/24 so the GE filter naturally
skips wired PXE addresses without any disable-NIC dance.
Server-side already in flight (netplan dual-bound, dnsmasq scope +
boot URL repointed, blancco preferences + grub.cfg + iPXE GetPxeScript
all sed'd to 172.16.9.1). This commit is the playbook / scripts /
docs side: 109 hits across 35 files sed'd in one shot.
After this lands + boot.wim is rebuilt + bays renumber off DHCP,
the 10.9.100.1 binding will be dropped from netplan as the final
cleanup step.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The inline one-liner in startnet.cmd called Get-NetAdapter, which is
not available in WinPE's stripped PowerShell (no NetTCPIP module).
Errors silently swallowed by the surrounding try/catch - POST never
fired, dashboard never showed bays during the WIM-apply phase.
Externalize to a standalone .ps1 on the enrollment share:
* Uses wmic (always present in WinPE 10+) for both serial AND mac
instead of Get-CimInstance / Get-NetAdapter.
* Logs every step to X:\Windows\Temp\winpe-status-push.log so a
future "POST didn't fire" debug is one file read away.
* startnet.cmd now just runs powershell -File Y:\scripts\winpe-status-
push.ps1. Future edits to the push logic do NOT require a boot.wim
rebuild; just edit the .ps1 on the share.
Mirror the existing pattern for run-enrollment.ps1 / wait-for-internet.ps1
/ migrate-to-wifi.ps1 (all already at /srv/samba/enrollment/scripts/).
Add the new file to the playbook's enrollment-scripts copy loop.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Previously the stage indices reflected logical milestones but not the
order they fire in. Run-ShopfloorSetup posted idx=1 (start) and idx=4
(PPKG) - but 09-Setup-Keyence (inside per-type loop) ran BETWEEN them
and posted idx=5/6. The dashboard then "regressed" from 6 back to 4
when PPKG fired, making it look stuck at the per-type-complete card.
New numbering matches actual execution order:
1 - WinPE: PESetup / WIM apply (startnet.cmd)
2 - Run-ShopfloorSetup: starting (Run-ShopfloorSetup.ps1)
3 - 09-Setup-<Type>: starting (per-type)
4 - 09-Setup-<Type>: complete (per-type)
5 - Run-ShopfloorSetup: PPKG enrollment (Run-ShopfloorSetup.ps1)
6 - Run-ShopfloorSetup: handoff to Monitor (Run-ShopfloorSetup.ps1)
7 - Monitor-IntuneProgress: Intune Device ID captured
services/imaging_status.py rewind threshold reverts to stage_index <= 1
now that WinPE startnet posts idx=1.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
services/imaging_status.py - if a new POST arrives with stage_index <= 1
that is lower than the cached stage_index, OR the previous run already
finished (status=succeeded|failed), reset the session: clear log_tail,
mint a fresh started_at, drop the status field so the in_progress
default re-applies. Preserves serial + records the previous run's
last_updated under previous_run_at for audit. Without this, a reimage
on the same bay would leave a stale 6/8 "succeeded" card visible until
the new run progressed past that index.
playbook/startnet.cmd - one-line PowerShell POST after the PXE menu
choice + enrollment-share mount, before PESetup.exe waits to start.
Captures BIOS serial via wmic, MAC via Get-NetAdapter, and posts:
stage_index=2, current_stage="WinPE: PESetup / WIM apply".
Best-effort; try/catch swallows any network failure so a missing
webapp never blocks imaging. PXE clients will now appear on the
/imaging dashboard during WinPE phase instead of only post-PPKG.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Pairs with Phase 1+2 from earlier (alias maps in Install-FromManifest,
GE-Enforce, Get-PCProfile, verify-state). See project-shopfloor-rename-reorg
memory for the plan.
Phase 3 (repo + paths):
- git mv per-PC-type dirs to gea-shopfloor-* names:
Standard -> gea-shopfloor-collections
CMM -> gea-shopfloor-cmm
Keyence -> gea-shopfloor-keyence
Genspect -> gea-shopfloor-genspect
WaxAndTrace -> gea-shopfloor-waxtrace
Display -> gea-shopfloor-display
Lab -> gea-shopfloor-common (folded; Timeclock+Lab merge)
- New gea-shopfloor-nocollections/ (clone of collections sans UDC scripts).
- New gea-shopfloor-heattreat/ (placeholder, README only).
- Move Standard/ntlars-backups/ -> _ntlars-backups/ (per-MN, not per-type).
- Run-ShopfloorSetup.ps1: Resolve-PCTypeDir helper walks alias group when
the on-disk dir for the current pcType is missing. Set-MachineNumber
helper-copy gated on collections|nocollections|legacy Standard-Machine.
- Update-MachineNumber.ps1: pcProfiles lookups try gea-shopfloor-collections
first, fall back to legacy Standard-Machine. PowerShell 5.1 compatible
(no null-coalesce).
Phase 4 (startnet.cmd menu):
- Choice 3 "GEA Shopfloor" now drills into a 9-item sub-menu instead of
going straight to enrollment. Sub-cats:
1. Machine with Collections -> gea-shopfloor-collections
2. Machine without Collections -> gea-shopfloor-nocollections
3. Common (Timeclock, Lab) -> gea-shopfloor-common
4. Keyence -> gea-shopfloor-keyence
5. CMM -> gea-shopfloor-cmm
6. Genspect -> gea-shopfloor-genspect
7. Heattreat -> gea-shopfloor-heattreat
8. Wax and Trace -> gea-shopfloor-waxtrace
9. Display -> gea-shopfloor-display
- Office menu (existing 6-option) follows for every sub-cat.
- Machine number prompt only for collections + nocollections.
- pc-subtype.txt + display-type.txt no longer written. PCTYPE is a
single full string (gea-shopfloor-*); subtype-aware code paths fall
back to empty and resolve via the alias map.
- CMM bootstrap stage gate switched from "%PCTYPE%"=="CMM" to
"%PCTYPE%"=="gea-shopfloor-cmm".
Test harness:
- B-enforce/run.sh PCSUBTYPE default changed from "Machine" to "" so
single-arg invocation matches the new single-string scheme. Two-arg
legacy form ("Standard Machine") still works via aliasing.
- B-enforce/tamper.ps1 alias-aware Test-MatrixEntryMatches mirroring
verify-state.ps1.
Smoke-tested on win11 VM as SYSTEM via qga: B-enforce harness 5-phase
cycle (stage / baseline / tamper / heal / idempotent) passes 10/10
with PCType=gea-shopfloor-collections AND with legacy "Standard Machine"
two-arg form.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Two bugs that have been silently masking GE-Enforce registration since
Stage 2a landed 2026-04-22, surfaced when v1 enforcers were retired
(commit 0badfc1) and could no longer cover for the missing v2 registration.
Bug 1: startnet.cmd at imaging time only xcopied Shopfloor\ and the
PCTYPE-specific dir from the imaging share to W:\Enrollment\shopfloor-setup\.
common\ was never copied. v1 dispatchers lived per-pctype and rode in via
the %PCTYPE% xcopy, so this was never noticed. v2's GE-Enforce.ps1 +
Register-GEEnforce.ps1 + lib\Install-FromManifest.ps1 all live in common\
and got skipped at imaging entirely.
Fix: add a third xcopy block for common\, mirroring the Shopfloor\ block
above it. Applies to playbook/startnet.cmd and startnet-template.cmd.
Bug 2: Run-ShopfloorSetup.ps1 line 288 set $commonSetupDir via
'Join-Path $PSScriptRoot common'. Run-ShopfloorSetup.ps1 lives at
C:\Enrollment\Run-ShopfloorSetup.ps1 (xcopied by startnet.cmd), so
$PSScriptRoot resolves to C:\Enrollment, and $commonSetupDir resolved
to C:\Enrollment\common - which is NOT where common\ lives even after
the bug 1 fix (correct path is C:\Enrollment\shopfloor-setup\common\).
The Test-Path -LiteralPath check on Register-GEEnforce.ps1 returned
false silently and GE-Enforce never registered.
Same bug existed for Register-MapSfldShare on line 321.
Fix: $PSScriptRoot -> $setupDir for both. $setupDir was already defined
on line 51 as Join-Path $enrollDir "shopfloor-setup", which is the path
the rest of the script uses consistently.
Pre-v1-cleanup, v1's per-pctype enforcer registrations on lines 322-357
(now deleted) ran independently and covered the gap, so PCs ended up
with v1 enforcers and the user thought v2 was running. Post-cleanup,
this bug means nothing gets registered.
PXE server has been patched directly: boot.wim re-baked with the new
startnet.cmd, /srv/samba/enrollment/shopfloor-setup/Run-ShopfloorSetup.ps1
replaced. New PXE-imaged PCs from this point forward will register
GE-Enforce correctly.
For PCs imaged before this fix: run Deploy-GEEnforce.ps1 from the SFLD
share's _meta/runtime/ to retrofit. Same one-liner used for promoting
v1 PCs to v2.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
- playbook/startnet.cmd + startnet-template.cmd: after preinstall staging,
xcopy Y:\pre-install\udc-backups to W:\PreInstall\udc-backups so UDC
settings JSONs are available during image deployment. Harvested from
live gold where this block existed but was never committed.
- scripts/mirror-from-gold.sh: update source paths to current taxonomy
layout (pre-install/, installers-post/, blancco/, config/) and add
ppkgs/, scripts/, shopfloor-setup/ sections. Added --delete for exact
mirror semantics. Used to seed the spare PXE server at 10.9.100.2 on
2026-04-16 from gold at 10.9.100.1.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
run-enrollment.ps1:
- Enable Provisioning-Diagnostics-Provider/Admin event log before invoking
provtool (was disabled by default; no diagnostics survived early runs).
- After provtool returns, copy C:\ProgramData\Microsoft\Provisioning\*
into C:\Logs\PPKG\ and snapshot HKLM\...\Sessions\* as
provisioning-sessions.json, plus export the Admin event channel to
Provisioning-Diagnostics-Admin.evtx. Gives us reviewable state
without relying on provtool's failure-only diagnostic bundle.
- provtool arg order is positional path + /quiet + /source BPRT (verified
against ProvEventLog from the PS cmdlet internal call).
startnet.cmd / startnet-template.cmd:
- Standard-Timeclock sub-type skips the machine-number prompt. Timeclock
PCs do not use a machine number so forcing a prompt wasted tech time
and left MACHINENUM at the 9999 default anyway. Machine sub-type is
unaffected.
Three changes that go together so a re-image never hits "System error 53":
1. dnsmasq dhcp-script hook (playbook/pxe-server-helpers/pxe-dhcp-hook.sh)
Fires on every add/del lease event. Runs conntrack -D and ss -K for the
client IP so any stale ESTABLISHED SMB session from a previous boot is
cleared before the client reconnects. Runs as root (dnsmasq default).
Wired into /etc/dnsmasq.conf via dhcp-script= directive in the playbook.
2. One-source PPKG (playbook/startnet.cmd + startnet-template.cmd)
The 5 per-Office PPKG copies were bit-for-bit identical; only the
filename differs because BPRT parses Office and Region out of the name.
Store one source file (e.g. GCCH_Prod_SFLD_v4.11.ppkg) and construct
the BPRT-tagged target filename at menu-selection time from variables:
SOURCE_PPKG / PPKG_VER / PPKG_EXP / REGION / OFFICE
copy /Y "Y:\ppkgs\%SOURCE_PPKG%" "W:\Enrollment\%PPKG%"
Bumped PPKG_VER v4.10 -> v4.11 and PPKG_EXP 20260430 -> 20270430.
Saves ~30G on disk per version.
3. run-enrollment.ps1 already committed in 5a9c3db uses provtool.exe
directly (no PowerShell cmdlet 180s timeout). Included here because it
is part of the same end-to-end PPKG path.
Workstation reorganization:
- All build/deploy/helper scripts moved into scripts/ (paths updated to use
REPO_ROOT instead of SCRIPT_DIR so they resolve sibling dirs from the new
depth)
- New config/ directory placeholder for site-specific overrides
- Removed stale: mok-keys/, test-vm.sh, test-lab.sh, setup-guide-original.txt,
unattend/ (duplicate of moved playbook/FlatUnattendW10.xml)
- README.md and SETUP.md structure listings updated, dead "Testing with KVM"
section removed
- .claude/ gitignored
Enrollment share internal taxonomy (forward-looking; existing servers
unaffected since they keep their current boot.wim with flat paths):
- Single SMB share kept (WinPE only mounts one Y: drive), but content now
organised into ppkgs/, scripts/, config/, shopfloor-setup/, pre-install/{bios,
installers}, installers-post/cmm/, blancco/, logs/
- README.md deployed to share root explaining each subdir
- New playbook tasks deploy site-config.json + wait-for-internet.ps1 +
migrate-to-wifi.ps1 explicitly (were ad-hoc on legacy servers)
- BIOS subdir moved into pre-install/bios/, preinstall/ renamed to pre-install/
- startnet.cmd + startnet-template.cmd updated with new Y:\subdir\ paths
- Bumped GCCH PPKG references v4.9 -> v4.10
Blancco USB-build fixes (so next fresh USB install boots Blancco end-to-end
without the manual fixup we did against GOLD):
- grub-blancco.cfg: kernel/initrd switched HTTP -> TFTP (GRUB's HTTP module
times out on multi-MB files); added modprobe.blacklist=iwlwifi,iwlmvm,btusb
(WiFi drivers hang udev on Intel business PCs)
- grubx64.efi rebuilt from updated cfg
- Playbook task added to create /srv/tftp/blancco/ symlinks pointing at the
HTTP-served binaries
run-enrollment.ps1: OOBEComplete is now set AFTER PPKG install (Win11 22H2+
hangs indefinitely if OOBEComplete is set before the bulk-enrollment PPKG runs).
Also includes deploy-bios.sh / pull-bios.sh / busybox-static / models.txt
that were sitting untracked at the repo root.
Rolls up everything from the CMM imaging test iteration tonight. No
single concern - several small, related polish items on the option-3
patched-MSI pipeline and the shopfloor-setup / sync_intune handoff.
- Rename all type-specific "01-Setup-<Type>.ps1" scripts to
"09-Setup-<Type>.ps1" across CMM, Display, Genspect, Keyence, Lab,
and WaxAndTrace. The "01-" prefix implied the script runs first in
the overall sequence when it actually runs between baseline (00, 04)
and finalization (06, 07). Logs now read "Running CMM setup:
09-Setup-CMM.ps1" which matches the real position. Standard/
01-eDNC.ps1 + 02-MachineNumberACLs.ps1 left alone - those digits
represent real within-type ordering.
- playbook/shopfloor-setup/site-config.json CMM profile updates:
- startupItems = [] (empty). Previously had WJ Shopfloor auto-launch
which the user does not want on CMM workstations. Now relies on
the Get-ProfileValue empty-array fix to not fall through to site
defaults.
- desktopApps + taskbarPins gain entries for PC-DMIS 2016, PC-DMIS
2019 R2, CLM Admin, and goCMM so 06-OrganizeDesktop Phase 2
materializes them into C:\\Users\\Public\\Desktop\\Shopfloor Tools\\
and 07-TaskbarLayout pins them. goCMM is under C:\\Program Files
(x86)\\General Electric\\goCMM\\ (GE product, not Hexagon).
- playbook/shopfloor-setup/Run-ShopfloorSetup.ps1: remove the blocking
"UNPLUG ethernet cable, press any key" prompt + the interactive
wired-NIC re-enable. The whole prompt block was a hard blocker on
the imaging chain that required a human to walk to each PC.
- playbook/shopfloor-setup/Shopfloor/lib/Monitor-IntuneProgress.ps1:
re-enable wired NICs unconditionally at the top of the transcript.
This is the new home for the re-enable that used to live behind the
prompt in Run-ShopfloorSetup. By the time sync_intune fires (after
PPKG reboot + auto-login + Stage-Dispatcher), the tech has had
minutes of wall-clock time to physically rewire from PXE to
production without us blocking on a keypress. Tower case is a
no-op because migrate-to-wifi.ps1 already left wired enabled.
- Internal comment updates in 09-Setup-CMM.ps1, cmm-manifest.json,
Install-FromManifest.ps1, and startnet.cmd (+ startnet-template)
to reflect the new filename.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
FlatUnattendW10-shopfloor.xml was rejected by Windows OOBE with
"the answer file is invalid" after the earlier tower-no-WiFi fix.
Root cause: the inline PowerShell in <CommandLine> for Orders 4 and
5 exceeded the SynchronousCommand CommandLine length limit (~1024
chars) and/or contained characters the unattend schema validator
dislikes.
Fix: move the logic to two external PS1 scripts and shrink both
CommandLine entries to ~85 chars each that just invoke the scripts.
- playbook/wait-for-internet.ps1: 60s interactive prompt ("connect
production network now"), then poll TCP 443 to login.microsoft-
online.us for up to 10 min with a hard timeout so the loop always
exits. Uses Test-NetConnection -Port 443 (not Test-Connection /
ICMP) because Microsoft 365 edges do not reliably respond to ping.
- playbook/migrate-to-wifi.ps1: Gates the entire wired-disable
migration on "does a WiFi adapter exist?" If not (tower), the
script is a no-op. If yes, disable wired / wait for WiFi internet
with a 5 min timeout / re-enable wired on timeout fallback.
- startnet.cmd stages both new scripts to W:\Enrollment\ next to
run-enrollment.ps1 during the WinPE phase.
- FlatUnattendW10-shopfloor.xml Orders 4 and 5 shrunk to short
invocations of C:\Enrollment\wait-for-internet.ps1 and
C:\Enrollment\migrate-to-wifi.ps1.
- startnet-template.cmd kept in sync.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- CMM imaging pipeline: WinPE-staged bootstrap + on-logon enforcer
against tsgwp00525 share, manifest-driven installer runner shared via
Install-FromManifest.ps1. Installs PC-DMIS 2016/2019 R2, CLM 1.8,
goCMM; enables .NET 3.5 prereq; registers GE CMM Enforce logon task
for ongoing version enforcement.
- Shopfloor serial drivers: StarTech PCIe serial + Prolific PL2303
USB-to-serial via Install-Drivers.cmd wrapper calling pnputil
/add-driver /subdirs /install. Scoped to Standard PCs.
- OpenText extended to CMM/Keyence/Genspect/WaxAndTrace via
preinstall.json PCTypes; Defect Tracker added to CMM profile
desktopApps + taskbarPins.
- Configure-PC startup-item toggle now persists across the logon
sweep via C:\\ProgramData\\GE\\Shopfloor\\startup-overrides.json;
06-OrganizeDesktop Phase 3 respects suppressed items.
- Get-ProfileValue helper added to Shopfloor/lib/Get-PCProfile.ps1;
distinguishes explicit empty array from missing key (fixes Lab
getting Plant Apps in startup because empty array was falsy).
- 06-OrganizeDesktop gains transcript logging at C:\\Logs\\SFLD\\
06-OrganizeDesktop.log and now deletes the stale Shopfloor Intune
Sync task when C:\\Enrollment\\sync-complete.txt is present (task
was registered with Limited principal and couldn't self-unregister).
- startnet.cmd CMM xcopy block (gated on pc-type=CMM) stages the
bundle to W:\\CMM-Install during WinPE.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Adds a machine number prompt to startnet.cmd after the Standard sub-type
selection. Tech enters the number during the PXE boot process. Defaults
to 9999 if Enter is pressed (existing placeholder behavior).
Written to C:\Enrollment\machine-number.txt alongside pc-type.txt.
Consumers:
00-PreInstall-MachineApps.ps1 - replaces 9999 in UDC InstallArgs with
the entered number, so UDC installs with the correct machine number
from the start (no post-setup Set-MachineNumber needed).
01-eDNC.ps1 - writes the machine number to the DNC\General\MachineNo
registry value during eDNC install.
Configure-PC.ps1 - existing $needsMachineNumber check already skips
the prompt when UDC/eDNC aren't at 9999, so no change needed.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Em dashes (U+2014) and arrows (U+2192) break PowerShell 5.1 on
Windows when the file has no UTF-8 BOM -- byte 0x94 gets read as
a right double quote in Windows-1252, silently closing strings
mid-parse. This caused run-enrollment.ps1 to fail on PXE-imaged
machines with "string is missing the terminator" at line 113.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Adds a pcProfiles section to site-config.json that lets each PC type (and
optional sub-type) override startupItems, taskbarPins, and desktopApps.
Scripts resolve: pcProfile > site-wide default > hardcoded fallback.
New shared helper: Shopfloor/lib/Get-PCProfile.ps1
Dot-sourced by consuming scripts. Reads pc-type.txt + pc-subtype.txt,
builds a profile key (e.g. "Standard-Machine"), and looks it up in
site-config.json pcProfiles. Exports $siteConfig, $pcType, $pcSubtype,
$profileKey, $pcProfile for the caller to use.
Replaces the inline Get-SiteConfig function that was copy-pasted into
each script. Scripts now do:
. "$PSScriptRoot\lib\Get-PCProfile.ps1"
instead of duplicating the loader.
startnet.cmd changes:
- Added Lab as PC type option (7)
- Standard now has a sub-type menu: Timeclock / Machine
- Display sub-type menu also writes PCSUBTYPE for consistency
- pc-subtype.txt written alongside pc-type.txt when sub-type selected
- site-config.json copied from enrollment share to W:\Enrollment\
site-config.json v2.0:
- New pcProfiles section with profiles for:
Standard-Timeclock, Standard-Machine, CMM, Genspect, Keyence,
WaxAndTrace, Lab, Display-Lobby, Display-Dashboard
- CMM/Genspect/Keyence/WaxAndTrace profiles have TODO comments for
type-specific apps (placeholder with WJ Shopfloor baseline only)
- Lab/Display profiles have empty startupItems and desktopApps
- Top-level startupItems/taskbarPins/desktopApps remain as site-wide
defaults (used when no profile matches)
Updated scripts:
06-OrganizeDesktop.ps1 - desktopApps from profile > site > hardcoded
07-TaskbarLayout.ps1 - taskbarPins from profile > site > hardcoded
08-EdgeDefaultBrowser.ps1 - uses shared profile loader
Configure-PC.ps1 - startupItems from profile > site > hardcoded
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
New site-config.json file at C:\Enrollment\ (staged by startnet.cmd from
the enrollment share) contains all West Jefferson-specific values that were
previously hardcoded across 7 scripts. To deploy at a different GE site,
clone site-config.json and change the values - scripts need zero changes.
Config schema (v1.0):
siteName / siteNameCompact - UDC/eDNC site args
urls{} - Edge startup tab fallback URLs
edgeStartupTabs[] - ordered tab list with .url file basenames
opentext{} - excluded .hep profiles and .lnk shortcuts
startupItems[] - Configure-PC toggle list (exe/existing/url)
taskbarPins[] - 07-TaskbarLayout pin order with lnk paths
desktopApps[] - 06-OrganizeDesktop Phase 2 app list
Every script uses the same inline Get-SiteConfig helper that reads the
JSON and returns $null if missing/corrupt. All consumers fall back to the
current hardcoded West Jefferson defaults when $siteConfig is null, so
PXE servers without a site-config.json continue working identically.
Scripts updated:
06-OrganizeDesktop.ps1 - desktopApps array from config
07-TaskbarLayout.ps1 - pinSpec array from config
08-EdgeDefaultBrowser.ps1 - startup tab loop from config
Configure-PC.ps1 - startup items + site name from config
Check-MachineNumber.ps1 - site name from config
Set-MachineNumber.ps1 - site name from config
01-eDNC.ps1 - siteName + siteNameCompact from config
startnet.cmd - copies site-config.json from enrollment share
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Replaces the single-session "cancel PPKG reboot and cram everything into
one autologon" flow with a staged chain where each reboot advances to the
next step automatically. The technician touches the keyboard 3 times total
(UNPLUG prompt, Y to reboot, Configure-PC selections).
New Stage-Dispatcher.ps1:
Reads C:\Enrollment\setup-stage.txt and chains through:
shopfloor-setup -> sync-intune -> configure-pc
Each stage re-registers HKLM RunOnce so the dispatcher fires again on
the next logon. Stage file is deleted when the chain completes.
Transcript logged to C:\Logs\SFLD\stage-dispatcher.log.
Stage "shopfloor-setup": runs Run-ShopfloorSetup.ps1 (which reboots via
shutdown /r /t 10). Dispatcher advances stage to sync-intune in the
~10 second window before the machine goes down, re-registers RunOnce.
Stage "sync-intune": launches Monitor-IntuneProgress.ps1 -Unattended.
Exit 2 (pre-reboot done, user confirmed): dispatcher re-registers
RunOnce and initiates shutdown /r /t 5. Stage stays at sync-intune so
the monitor picks up post-reboot state on next boot.
Exit 0 (post-reboot install complete): dispatcher chains directly to
Configure-PC.ps1 in the same session, then deletes the stage file.
Stage "configure-pc": runs Configure-PC.ps1 and deletes the stage file.
Fallback entry point if the post-reboot chain was interrupted.
Modified run-enrollment.ps1:
Removed the shutdown /a that canceled the PPKG reboot. Instead writes
setup-stage.txt = "shopfloor-setup" and registers RunOnce for the
dispatcher. PPKG reboot fires naturally (handles PendingFileRename
operations like Zscaler rename and PPKG self-cleanup). Now tracked in
the git repo at playbook/shopfloor-setup/run-enrollment.ps1.
Modified Monitor-IntuneProgress.ps1:
New -Unattended switch. When set:
Invoke-SetupComplete exits 0 without waiting for keypress.
Invoke-RebootPrompt exits 2 without prompting or rebooting (dispatcher
handles both). Manual sync_intune.bat usage (no flag) unchanged.
RetriggerMinutes bumped from 3 to 5 (user request).
Modified startnet.cmd:
Now also copies Stage-Dispatcher.ps1 from the PXE server to
W:\Enrollment\Stage-Dispatcher.ps1 alongside run-enrollment.ps1.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Adds a local-install pipeline so Standard shopfloor PCs get Oracle, the
VC++ redists (2008-2022), and UDC installed during PXE imaging via Samba
instead of pulling ~215 MB per device from Azure blob over the corporate
WAN. Intune DSC then verifies (already-installed apps are skipped) and
the only Azure traffic on the happy path is ~11 KB of CustomScripts
wrapper polling.
New files:
- playbook/preinstall/preinstall.json — curated app list with PCTypes
filter and per-app detection rules. Install order puts VC++ 2008
LAST so its (formerly) reboot-triggering bootstrapper doesn't kill
the runner mid-loop. (2008 itself now uses extracted vc_red.msi with
REBOOT=ReallySuppress; the reorder is defense in depth.)
- playbook/shopfloor-setup/Shopfloor/00-PreInstall-MachineApps.ps1 —
the runner. Numbered 00- so it runs first in the baseline sequence.
Reads preinstall.json, filters by PCTYPE, polls for completion via
detection check (handles UDC's hung WPF process by killing it once
detection passes), uses synchronous WriteThrough logging that
survives hard reboots, preserves log history across runs.
- playbook/shopfloor-setup/Standard/Set-MachineNumber.{ps1,bat} — desktop
helper for SupportUser. Reads current UDC + eDNC machine numbers,
prompts via VB InputBox, validates digits-only, kills running UDC,
edits both C:\ProgramData\UDC\udc_settings.json and HKLM\…\GE Aircraft
Engines\DNC\General\MachineNo, relaunches UDC. Lets a tech assign a
real machine number to a mass-produced PC without admin/LAPS.
- playbook/sync-preinstall.sh — workstation helper to push installer
binaries from /home/camp/pxe-images/main/ to the live PXE Samba.
Changes:
- playbook/startnet.cmd + startnet-template.cmd — add xcopy to stage
preinstall bundle from Y:\preinstall\ to W:\PreInstall\ during the
WinPE imaging phase, gated on PCTYPE being set.
- playbook/pxe_server_setup.yml — create /srv/samba/enrollment/preinstall
+ installers/ directories and deploy preinstall.json there.
- playbook/shopfloor-setup/Run-ShopfloorSetup.ps1 — bump AutoLogonCount
to 99 at start (defense against any installer triggering an immediate
reboot mid-dispatcher; final line still resets to 2 on successful
completion). Copy Set-MachineNumber.{ps1,bat} to SupportUser desktop
on Standard PCs.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Fix check-bios.cmd: replace parenthesized if blocks with goto labels
(cmd.exe fails silently with if/else on network-mapped drives)
- Move BIOS check files to winpeapps/_shared/BIOS for reliable SMB access
- Add network wait loop before BIOS check in startnet.cmd
- Show firmware status in WinPE menu header (BIOS_STATUS variable)
- Add BypassNRO registry key to skip OOBE network requirement
- Refactor download-drivers.py with --parallel N flag (ThreadPoolExecutor)
- Set SupportUser AutoLogonCount to 3 in shopfloor unattend
- Add shutdown -a at start + shutdown /r /t 10 at end of Run-ShopfloorSetup.ps1
- Switch download-drivers.py from wget to curl for reliable stall detection
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add /user:pxe-upload pxe credentials to all net use commands (share requires auth)
- Replace timeout with ping delays (timeout.exe not available in WinPE)
- Restore size: largest disk match in autoinstall (root cause was BIOS RST mode)
- Simplify autoinstall late-commands structure
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
startnet.cmd now polls for PESetup.exe completion and reboots with a
15-second countdown. Build scripts (USB + Proxmox) auto-download pip
wheels if the pip-wheels/ directory is missing. Added mok-keys/ to
gitignore.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add startnet.cmd: FlatSetupLoader.exe + Boot.tag/Media.tag eliminates
physical USB requirement for WinPE PXE deployment
- Add Upload-Image.ps1: PowerShell script to robocopy MCL cached images
to PXE server via SMB (Deploy, Tools, Sources)
- Add gea-shopfloor-mce image type across playbook, webapp, startnet
- Change webapp import to move (not copy) for upload sources to save disk
- Add Samba symlink following config for shared image directories
- Add Media.tag creation task in playbook for drive detection
- Update prepare-boot-tools.sh with Blancco config/initramfs patching
- Add grub-efi-amd64-bin to download-packages.sh
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
