navigator.clipboard.writeText is gated on isSecureContext - HTTPS
or localhost only. PXE dashboard is served over plain HTTP
(10.9.100.1:9009) so the API was undefined and the chain threw
before .catch fired - user saw nothing. Wrap clipboard write in
copyText() that prefers the modern API and falls back to the
classic invisible-textarea + document.execCommand('copy') path
which works on HTTP. Visual flash logic moved into flashCopied()
for reuse.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Click effect: button flashes green with "copied!" text and 1.15x
scale pulse, reverts after 1.2s. Failure case (clipboard API blocked
or HTTP context) shows red "failed" for 1.5s. Handler moved out of
inline onclick into a single delegated click listener at the doc
level so future copy buttons just need the .copy-btn class +
data-copy-text attribute.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Field bay surfaced two bugs in one diag dump (mdm-diag-F907T5X3 -
6PPSF24):
1. GE Proactive Remediation Report IP actually writes
GE_Report_IP_Address_2_5.LOG (uppercase .LOG), not the .txt I
assumed. Globs in two places had .txt filter -> never matched ->
Phase 1 stuck IN PROGRESS forever even after the file landed and
wired-NIC re-enable never fired. Drop extension from both globs
in Monitor-IntuneProgress.ps1 (id=7 push gate + p1Done check).
2. The "GE Re-enable Wired NICs" SYSTEM task registered by
Run-ShopfloorSetup was polling Autologon_Remediation.log for
"Autologon set for ShopFloor" - a lockdown-time signal. Re-enable
needs to fire at Report-IP time (well before lockdown) so that
Monitor can push idx=7 with the QR before the Intune-triggered
LAPS-prompt reboot. Repoint the SYSTEM task's poll to
C:\Logs\GE_Report_IP_Address* (any extension).
Plus minor UX: copy button next to the Intune device ID on
/imaging dashboard so techs can grab the GUID without having to
double-click-select the <code>.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Monitor-IntuneProgress.ps1: the previous Ensure-SendPxeStatus function
ran '. $lib' from inside the function body. PowerShell's dot-source-
inside-function semantics put the imported Send-PxeStatus into the
function's LOCAL scope, not the script scope. By the time Get-Phase1
called Get-Command Send-PxeStatus, the function had already returned
and Send-PxeStatus was out of scope - silently never invoked, no log
entry at all (success or failure). Diagnostic confirmed: bay had
DeviceId in dsregcmd, manual Send-PxeStatus from operator prompt
fired idx=7 cleanly with QR rendered, but Monitor's automatic call
never showed up in C:\Logs\send-pxe-status.log.
Fix: dot-source at script top-level (outside any function). Then
Send-PxeStatus is in script scope where every function in the file
can call it. Keep Ensure-SendPxeStatus as a no-op stub for any caller
still invoking it.
imaging.html: bump QR data-qr-size from 56 to 160 px. A 36-char UUID
at ECC M needs ~29x29 modules; at 56px each module was ~1.5px which
is too tight for a phone camera to lock onto from typical distance.
160 px gives ~5 px/module which scans cleanly.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Drops the filename, type, and size columns from the Blancco Reports
list - operators want bay-identification fields, not file metadata.
Filename moves to a row hover tooltip (title attribute) so it is still
recoverable for ad-hoc lookups.
Adds a Result column derived from each XML report's overall erasure
state:
* Successful -> green badge (all erasure entries report Successful)
* Failed -> red badge (any erasure entry reports a non-Successful state)
* other -> grey badge with the verbatim state
* blank/non-XML -> dash
The state roll-up lives in the blancco_reports route's per-file parse
loop next to the existing serial/model extraction.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Adds end-to-end progress tracking for PXE imaging sessions and surfaces
each Blancco report's BIOS serial in the report list.
webapp:
* services/imaging_status.py - JSON-per-serial state store under
IMAGING_DIR (default /var/log/pxe-imaging). Atomic write via
tempfile + rename. log_tail capped at 50 lines. Merges partial
updates so clients can post just the current_stage tick.
* config.py - new IMAGING_DIR env-overridable path.
* services/csrf.py - explicit exempt list for machine-to-machine
endpoints; /imaging/status is the first entry. Air-gapped LAN;
trust-by-network for client posts.
* app.py - four new routes:
GET /imaging dashboard (renders all sessions)
POST /imaging/status client status push (JSON body)
GET /imaging/<serial>.json raw session JSON for ad-hoc polling
POST /imaging/delete/<s> clear a session from the dashboard
Also parses each Blancco XML in the /reports list to surface
system.serial + system.model columns.
* templates/imaging.html - Bootstrap dashboard with per-session
cards (state badge, progress bar, stage idx/total, mac, elapsed,
log tail). meta http-equiv refresh=5 for auto-tick.
* templates/base.html - new "Imaging Progress" nav entry.
* templates/reports.html - Serial + Model columns added.
playbook:
* shopfloor-setup/Shopfloor/lib/Send-PxeStatus.ps1 - new helper.
Dot-source this then call Send-PxeStatus -Stage X -StageIndex N
-StageTotal M from any stage script. BIOS serial via CIM, MAC via
Get-NetAdapter, pctype + machinenumber from C:\Enrollment.
Failures are swallowed to a local log so a network blip doesn't
block imaging.
* shopfloor-setup/Run-ShopfloorSetup.ps1 - dot-sources helper +
posts at three coarse milestones (start, PPKG enrollment,
handoff to Monitor-IntuneProgress).
* shopfloor-setup/gea-shopfloor-keyence/09-Setup-Keyence.ps1 -
posts at session start + after Install-FromManifest with
succeeded/failed status derived from $rc. Other 09-Setup-*.ps1
scripts can follow the same pattern.
ID is BIOS serial (stable across WinPE -> Windows transition and
across reboots, unlike hostname which is random pre-PPKG). Operator
already knows the serial of the bay they imaged.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
End-to-end fixes for Blancco Drive Eraser PXE flow uncovered by chasing
"reports never reach SMB share" across two air-gapped sites:
playbook/blancco-init.sh:
* Drop silent || true on wget of preferences.xml + config.xml. Fail
loud with shell-drop if download or marker grep fails. Background:
airootfs /opt/scripts/validate_preferences.sh restores
/albus/preferences.save (factory defaults, empty network_share) if
xmllint fails. wget failure made every report silently land nowhere.
* Clobber /albus/preferences.save with the same served file so even if
the validator fallback fires, the SMB target survives.
* Bind-mount /dev/null over /sys/power/{state,disk,mem_sleep,autosleep}
before switch_root. Albus's license-retry path writes /sys/power/state
directly (bypassing systemd targets); this is the last-line block.
* /dev/null symlinks for sleep/suspend/hibernate systemd targets in the
airootfs overlay + logind drop-in with IdleAction/Handle*=ignore.
Three independent layers because cmdline systemd.mask alone is bypassed
by direct /sys/power/state writes.
* xinitrc.d/00-no-screen-blank.sh runs xset s off -dpms + setterm
-blank 0 -powerdown 0 so the Blancco GUI doesn't blank during long
erasures.
* Removed the 20-failsafeDriver.conf "modesetting" pin. modesetting
needs DRM/KMS which we disable on kernel cmdline; "vesa" also failed
on NVIDIA. With the pin gone Xorg auto-picks fbdev which uses the
kernel framebuffer from vga=normal - works across Intel, AMD, and
older NVIDIA without nouveau.
playbook/pxe_server_setup.yml:
* dnsmasq.conf: explicit empty-value dhcp-option=3 + dhcp-option=6.
Without them, dnsmasq defaults to sending its own IP as router AND
DNS. Commenting the configured-value lines did NOT disable the push
(root cause of "wired keeps picking up 10.9.100.1 as gateway").
* Split the Blancco config.img extraction and preferences.xml deploy
into separate tasks. The previous shell-with-creates: gate caused
playbook re-runs to skip the prefs deploy entirely after first run.
* Added a validation task that runs python3 xml parse + grep on the
deployed preferences.xml to fail the playbook at deploy time if the
SMB markers are missing.
* Added Environment=TZ=America/New_York to the pxe-webapp systemd
service so report mtimes and audit log render in Eastern time even
if the Python process is started before timedatectl converges.
webapp:
* services/blancco_report.py: parse Blancco's XML report format
(recursive <entries name="..."> walker) into a friendly dict.
* templates/report_view.html: Bootstrap "Drive Erasure Certificate"
layout - hero summary, customer + system cards, per-drive cards with
step-by-step erasure timeline, document signing footer with
integrity hash detail.
* /reports/view/<filename> route + View button on the reports list
(XML reports only; PDFs still download).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
- Playbook: detect interface already configured with 10.9.100.1 before
falling back to non-default-gateway heuristic (fixes dnsmasq binding
to wrong NIC when multiple interfaces exist)
- test-vm.sh: auto-attach br-pxe bridge NIC if available on host
- Webapp: add network upload import via SMB share with shared driver
deduplication and symlinks
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Move Flask to localhost:9010, Apache serves port 9009 with static file
handling and reverse proxy to fix intermittent asset loading on remote clients
- Add "PXE Manager" branding beneath logo in sidebar
- Increase code editor size (startnet.cmd and unattend XML) to 70vh
- Add test-lab.sh for full lab VM testing
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add build-proxmox-iso.sh: remaster Ubuntu ISO with autoinstall config,
offline packages, playbook, webapp, and boot files for zero-touch
Proxmox VM deployment
- Add boot-files/ directory for WinPE boot files (wimboot, boot.wim,
BCD, ipxe.efi, etc.) sourced from WestJeff playbook
- Update build-usb.sh and test-vm.sh to bundle boot-files automatically
- Add usb_root variable to playbook, fix all file copy paths to use it
- Unify Apache VirtualHost config (merge default site + webapp proxy)
- Add CSRF token protection to all webapp POST forms and API endpoints
- Update README with Proxmox deployment instructions
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Samba share at \\server\blancco-reports for automatic report collection
- Webapp reports page with list, download, and delete
- Compliance warning on delete confirmation
- Sidebar link under Tools section
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Added wimtools to offline packages and playbook verification
- Webapp startnet.cmd editor: extract, view, edit, save back to boot.wim
- Uses wimextract/wimupdate for in-place WIM modification
- Dark-themed code editor with tab support and common command reference
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- iPXE boot menu with WinPE, Clonezilla, Blancco Drive Eraser, Memtest86+
- prepare-boot-tools.sh to download/extract boot tool binaries
- Clonezilla backup management in webapp (upload, download, delete)
- Clonezilla Samba share for network backup/restore
- GE Aerospace logo and favicon in webapp
- Updated playbook with boot tool directories and webapp env vars
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- webapp/: Flask web management app with:
- Dashboard showing image types and service status
- USB import page for WinPE deployment content
- Unattend.xml visual editor (driver paths, specialize commands,
OOBE settings, first logon commands, raw XML view)
- API endpoints for services and image management
- SETUP.md: Complete setup documentation for streamlined process
- build-usb.sh: Now copies webapp and optional WinPE images to USB
- playbook: Added webapp deployment (systemd service, Apache reverse
proxy), offline package verification, WinPE auto-import from USB
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
