Sites no longer need either MAC in site-vars.
pxe_nic_mac empty: before anything changes, the playbook runs
pxe-pick-nic --auto. It takes the one wired port with a link, accepts it
only if pxe-nic-check calls it isolated (no LLDP/CDP/802.1X, no other
DHCP server, at most 10 hosts heard in 65 s), and pins it. The choice is
saved in /etc/pxe-server/nic-pick.conf and never re-guessed at boot.
When it cannot tell (no link, two links, not isolated) nothing changes,
and the console banner says why and to run sudo pxe-pick-nic: pull the
imaging cable and plug it back in, and the port that blinked is the
imaging one. Both helpers are installed before the pick, so that works
after a refused first boot. The site's corp domains and allowed
switches are passed to the check.
corp_nic_mac empty: every other wired port (en*, eth*) is a catch-all
DHCP client, so GE can be plugged in at install or later.
- dnsmasq stays pinned with interface=pxe0. A new check refuses any
dhcp-range outside the imaging subnet, and proxy ranges.
- The catch-all ports ignore offers from 172.16.9.1.
- UFW allows SSH and 9009 by source on any interface, and keeps those
rules when the old any-interface rules are removed.
- pxe_nic_name must not look like en*/eth* in this mode.
pxe-netplan-apply.sh takes 3 or 5 args. Without a pinned GE NIC it:
- renames stray names (the old pxe0 after a re-pick, a leftover corp0)
to enx<mac>, so the catch-all takes them, and restores them on revert;
- checks that every NIC that had a DHCP address before has one after,
tracked by MAC.
With both MACs set (the WJ server), netplan, the dnsmasq pin and UFW
render byte-for-byte as before.
Tested in the pxetest VMs:
- Fresh install with no MACs and the GE link down: the imaging port was
picked and pinned as pxe0 with 172.16.9.1, and dnsmasq bound DHCP to
pxe0 only. GE plugged in afterwards got a lease, SSH worked, and the
guard reported pxe0 isolated.
- --auto refuses with two links.
- The interactive pick works by pulling and replugging the link.
- A 3-arg re-apply is UNCHANGED.
Unit tests (fake sysfs) cover the re-pick and pinned-to-catch-all renames.
A freshly installed server could not build standard or engineer: about
8 GB they install from existed only on the running server.
scripts/capture-site-content.sh pulls it over SSH into the gitignored
payload:
- _shared/Applications/extra (Office, Adobe, OpenText, Java, fonts, Wi-Fi,
Zscaler), without pxe-status/ (the playbook deploys that);
- each image's own Deploy/Applications files and folders (GE CA
certificates, the Engineering Layer payload), without the repo-managed
Install-EngineeringLayer.ps1 and without stale BPRT copies;
- the links images keep there, as links.txt;
- fresh bios-staging (*.exe plus models.txt, which the Dell update
rewrites), boot.wim, and the known Blancco file set.
It dry-runs by default, compares by checksum (a Blancco config.img had the
same size and time as the stale copy), writes SHA256SUMS, and refuses what
FAT32 cannot hold: files of 4 GiB or more, Windows-illegal names, and
case-only name clashes.
build-usb.sh copies site-content/ unsplit and refuses to build without it
(unless --skip-site-content), or when SHA256SUMS is missing or does not
cover every file. The playbook checks SHA256SUMS, then merges the content
into winpeapps and recreates the links. It only links to folders that
exist, so it never creates an empty _shared BPRT, which would stop the
first MCL import from seeding it. Link lines are validated before anything
is copied.
pull-bios.sh is gone. It read a path the server no longer uses, with a
hard-coded password.
Clonezilla Live runs a Debian-signed kernel whose modules (usb-storage,
uas, exfat) are signed by the same build key, so the menu now starts it
through Debian's Microsoft-signed shim with the iPXE shim command, the
same way Blancco uses Ubuntu's. prepare-boot-tools.sh extracts that shim
from the Clonezilla release (EFI/boot/bootx64.efi -> clonezilla/
shimx64.efi) and warns when the shim is not Microsoft-signed or the
kernel not Debian-signed.
Memtest86+ is unsigned and needed Secure Boot off; memory tests now use
the Dell built-in diagnostics (F12 at power-on, Diagnostics), noted in
the menu. The playbook removes the old memtest web dir. Nothing on the
menu needs Secure Boot off any more; the 'disable Secure Boot' screen
remains only as the fallback when a signed path fails.
H1 corp_admin_cidrs (UFW 22/9009 on the corp NIC from these only; refuses
when it would lock out the current SSH client) and corp_ssh_password_auth
(sshd drop-in, passwords only from the imaging subnet). Defaults keep the
current behaviour and print a loud warning.
H2 pxe-netplan-apply.sh: pre-flight refusal (pxe-MAC NIC holds the default
route, a DHCP lease or the route to an SSH client), run from the USB
before anything changes; post-apply checks (names, imaging IPv4, corp
IPv4 back within 30 s, SSH route) and a 120 s systemd-run auto-revert.
H3 restore() puts the previous NIC names back (two-phase rename via
temporary names, so swaps work) before generate + apply.
H4 a failed rename is fatal (restore + exit 1); the play drops the old
any-interface UFW rules only after verifying both NICs and their
per-interface SSH rules.
H5 first-boot checks the playbook exit code, retries at next boot (max 5),
writes /var/lib/pxe-firstboot.failed and /etc/issue + /etc/motd banners.
M1 build-usb.sh verifies iPXE files against the playbook pins, every wheel
against its own package's hashes, drops the unpinned pip fallback,
requires --site-vars or --no-site-vars.
M2 webapp restarts when the code, wheels or unit changed.
M3 ignore-carrier on the imaging NIC; ip_nonlocal_bind kept for the
apache/networkd boot race.
M4 menu suffix must match blancco_kver; missing kernel with no earlier
build is fatal; a live menu with the staged Blancco test entry is not
overwritten.
M5 build-proxmox-iso.sh is unsupported (hard exit); use build-usb --image.
M6 deploy-unattend.sh: password via SSHPASS env and sudo stdin only,
%q-quoted remote args, sha256 check of the live file; lint-unattend.py
reads PXE_SERVER/PXE_USER/PXE_PASS and uses sshpass -e.
M7 the playbook lints the unattend files before the force: yes copies
(lint-unattend.py ships on CIDATA as scripts/); pre-commit ACMR.
M8 Blancco initramfs build: no ignore_errors, pipefail, trap cleanup.
Also: Send-ImagingStage.ps1 deploy, carrier hook install tasks
(pxe-nic-carrier, networkd-dispatcher), L1 imaging-active hold
(allow_disruptive) and no iPXE downgrade below an Updates-page install,
L2 iso-volid, L3 kver pin read from the playbook, L4 cp -rL, L5 refuse
>= 4 GiB WinPE files, L6 PIP_DIR wipe guard, L7 per-package wheel hashes,
no online fallback, L8 check-updates.py (apt_pkg/cached compare, all
components, exit 2 on no debs / bad answers).
- autoinstall: dead mirror + fallback offline-install, so the installed
base is exactly the ISO's; late-commands run offline-apt-install.sh on
CIDATA packages/ (local apt repo, one transaction, errors fail the
install, log /var/log/offline-apt-install.log); first boot no longer
runs dpkg -i; real archive sources written back at the end.
- download-packages.sh --iso: unpacks the ISO's default install source
into a docker image (pxe-iso-base:<version>) and downloads there: all
updates of the base, the explicit list (zip included) and the newest
pool packages with their closure; writes Packages + explicit.list and
checks the set offline in a fresh base container (--network none).
- offline-apt-install.sh: new; also used by that check (--simulate).
- build-usb.sh: ships Packages, explicit.list and the script; refuses a
set without them.
- tests/vm: pxetest-client-nosb (Secure Boot off, e1000e, SATA), one
client at a time.
- Copy the whole webapp/ tree (minus __pycache__) in build-usb.sh and
build-proxmox-iso.sh, so config, services/, views/ and
blancco_evidence_monthly.py reach the server.
- sfdisk --append failure now aborts; the CIDATA partition is the one
starting exactly at the computed sector, and nothing that starts
before it is ever formatted (the old fallback hit the ISO's EFI
partition).
- Volume id and El Torito load sizes come from the ISO
(xorriso -report_el_torito as_mkisofs); grub.cfg must contain
autoinstall after patching.
- --image FILE SIZE|auto builds the same layout in a file without root
(mkfs.vfat -C + mtools, sfdisk on the file). Plus --payload-root,
--skip-enrollment/-bios/-drivers/-boot-tools, --yes.
- tests/vm: libvirt harness (pxetest-server, pxetest-client, isolated
pxetest-imaging network) with fetch-iso/build-image/create/start/
status/stop/destroy.
Workstation reorganization:
- All build/deploy/helper scripts moved into scripts/ (paths updated to use
REPO_ROOT instead of SCRIPT_DIR so they resolve sibling dirs from the new
depth)
- New config/ directory placeholder for site-specific overrides
- Removed stale: mok-keys/, test-vm.sh, test-lab.sh, setup-guide-original.txt,
unattend/ (duplicate of moved playbook/FlatUnattendW10.xml)
- README.md and SETUP.md structure listings updated, dead "Testing with KVM"
section removed
- .claude/ gitignored
Enrollment share internal taxonomy (forward-looking; existing servers
unaffected since they keep their current boot.wim with flat paths):
- Single SMB share kept (WinPE only mounts one Y: drive), but content now
organised into ppkgs/, scripts/, config/, shopfloor-setup/, pre-install/{bios,
installers}, installers-post/cmm/, blancco/, logs/
- README.md deployed to share root explaining each subdir
- New playbook tasks deploy site-config.json + wait-for-internet.ps1 +
migrate-to-wifi.ps1 explicitly (were ad-hoc on legacy servers)
- BIOS subdir moved into pre-install/bios/, preinstall/ renamed to pre-install/
- startnet.cmd + startnet-template.cmd updated with new Y:\subdir\ paths
- Bumped GCCH PPKG references v4.9 -> v4.10
Blancco USB-build fixes (so next fresh USB install boots Blancco end-to-end
without the manual fixup we did against GOLD):
- grub-blancco.cfg: kernel/initrd switched HTTP -> TFTP (GRUB's HTTP module
times out on multi-MB files); added modprobe.blacklist=iwlwifi,iwlmvm,btusb
(WiFi drivers hang udev on Intel business PCs)
- grubx64.efi rebuilt from updated cfg
- Playbook task added to create /srv/tftp/blancco/ symlinks pointing at the
HTTP-served binaries
run-enrollment.ps1: OOBEComplete is now set AFTER PPKG install (Win11 22H2+
hangs indefinitely if OOBEComplete is set before the bulk-enrollment PPKG runs).
Also includes deploy-bios.sh / pull-bios.sh / busybox-static / models.txt
that were sitting untracked at the repo root.
