Monitor-IntuneProgress.ps1: the previous Ensure-SendPxeStatus function
ran '. $lib' from inside the function body. PowerShell's dot-source-
inside-function semantics put the imported Send-PxeStatus into the
function's LOCAL scope, not the script scope. By the time Get-Phase1
called Get-Command Send-PxeStatus, the function had already returned
and Send-PxeStatus was out of scope - silently never invoked, no log
entry at all (success or failure). Diagnostic confirmed: bay had
DeviceId in dsregcmd, manual Send-PxeStatus from operator prompt
fired idx=7 cleanly with QR rendered, but Monitor's automatic call
never showed up in C:\Logs\send-pxe-status.log.
Fix: dot-source at script top-level (outside any function). Then
Send-PxeStatus is in script scope where every function in the file
can call it. Keep Ensure-SendPxeStatus as a no-op stub for any caller
still invoking it.
imaging.html: bump QR data-qr-size from 56 to 160 px. A 36-char UUID
at ECC M needs ~29x29 modules; at 56px each module was ~1.5px which
is too tight for a phone camera to lock onto from typical distance.
160 px gives ~5 px/module which scans cleanly.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Previously the stage indices reflected logical milestones but not the
order they fire in. Run-ShopfloorSetup posted idx=1 (start) and idx=4
(PPKG) - but 09-Setup-Keyence (inside per-type loop) ran BETWEEN them
and posted idx=5/6. The dashboard then "regressed" from 6 back to 4
when PPKG fired, making it look stuck at the per-type-complete card.
New numbering matches actual execution order:
1 - WinPE: PESetup / WIM apply (startnet.cmd)
2 - Run-ShopfloorSetup: starting (Run-ShopfloorSetup.ps1)
3 - 09-Setup-<Type>: starting (per-type)
4 - 09-Setup-<Type>: complete (per-type)
5 - Run-ShopfloorSetup: PPKG enrollment (Run-ShopfloorSetup.ps1)
6 - Run-ShopfloorSetup: handoff to Monitor (Run-ShopfloorSetup.ps1)
7 - Monitor-IntuneProgress: Intune Device ID captured
services/imaging_status.py rewind threshold reverts to stage_index <= 1
now that WinPE startnet posts idx=1.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Reset trigger previously fired only when a new POST landed at idx <= 1,
which meant a reimage didn't reset the dashboard card until
Run-ShopfloorSetup ran post-PPKG (~10-20 min in). With the WinPE-phase
status push from startnet.cmd in commit 4e018fe firing at idx=2, that
earlier signal needs to count as a new-run marker too.
Threshold of 2 makes startnet.cmd the canonical reset point: within
seconds of PXE menu choice on the bay, the dashboard card flips from
the previous run's high-idx state back to "WinPE: PESetup / WIM apply"
+ fresh started_at.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Drops the filename, type, and size columns from the Blancco Reports
list - operators want bay-identification fields, not file metadata.
Filename moves to a row hover tooltip (title attribute) so it is still
recoverable for ad-hoc lookups.
Adds a Result column derived from each XML report's overall erasure
state:
* Successful -> green badge (all erasure entries report Successful)
* Failed -> red badge (any erasure entry reports a non-Successful state)
* other -> grey badge with the verbatim state
* blank/non-XML -> dash
The state roll-up lives in the blancco_reports route's per-file parse
loop next to the existing serial/model extraction.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
services/imaging_status.py - if a new POST arrives with stage_index <= 1
that is lower than the cached stage_index, OR the previous run already
finished (status=succeeded|failed), reset the session: clear log_tail,
mint a fresh started_at, drop the status field so the in_progress
default re-applies. Preserves serial + records the previous run's
last_updated under previous_run_at for audit. Without this, a reimage
on the same bay would leave a stale 6/8 "succeeded" card visible until
the new run progressed past that index.
playbook/startnet.cmd - one-line PowerShell POST after the PXE menu
choice + enrollment-share mount, before PESetup.exe waits to start.
Captures BIOS serial via wmic, MAC via Get-NetAdapter, and posts:
stage_index=2, current_stage="WinPE: PESetup / WIM apply".
Best-effort; try/catch swallows any network failure so a missing
webapp never blocks imaging. PXE clients will now appear on the
/imaging dashboard during WinPE phase instead of only post-PPKG.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Adds end-to-end progress tracking for PXE imaging sessions and surfaces
each Blancco report's BIOS serial in the report list.
webapp:
* services/imaging_status.py - JSON-per-serial state store under
IMAGING_DIR (default /var/log/pxe-imaging). Atomic write via
tempfile + rename. log_tail capped at 50 lines. Merges partial
updates so clients can post just the current_stage tick.
* config.py - new IMAGING_DIR env-overridable path.
* services/csrf.py - explicit exempt list for machine-to-machine
endpoints; /imaging/status is the first entry. Air-gapped LAN;
trust-by-network for client posts.
* app.py - four new routes:
GET /imaging dashboard (renders all sessions)
POST /imaging/status client status push (JSON body)
GET /imaging/<serial>.json raw session JSON for ad-hoc polling
POST /imaging/delete/<s> clear a session from the dashboard
Also parses each Blancco XML in the /reports list to surface
system.serial + system.model columns.
* templates/imaging.html - Bootstrap dashboard with per-session
cards (state badge, progress bar, stage idx/total, mac, elapsed,
log tail). meta http-equiv refresh=5 for auto-tick.
* templates/base.html - new "Imaging Progress" nav entry.
* templates/reports.html - Serial + Model columns added.
playbook:
* shopfloor-setup/Shopfloor/lib/Send-PxeStatus.ps1 - new helper.
Dot-source this then call Send-PxeStatus -Stage X -StageIndex N
-StageTotal M from any stage script. BIOS serial via CIM, MAC via
Get-NetAdapter, pctype + machinenumber from C:\Enrollment.
Failures are swallowed to a local log so a network blip doesn't
block imaging.
* shopfloor-setup/Run-ShopfloorSetup.ps1 - dot-sources helper +
posts at three coarse milestones (start, PPKG enrollment,
handoff to Monitor-IntuneProgress).
* shopfloor-setup/gea-shopfloor-keyence/09-Setup-Keyence.ps1 -
posts at session start + after Install-FromManifest with
succeeded/failed status derived from $rc. Other 09-Setup-*.ps1
scripts can follow the same pattern.
ID is BIOS serial (stable across WinPE -> Windows transition and
across reboots, unlike hostname which is random pre-PPKG). Operator
already knows the serial of the bay they imaged.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
End-to-end fixes for Blancco Drive Eraser PXE flow uncovered by chasing
"reports never reach SMB share" across two air-gapped sites:
playbook/blancco-init.sh:
* Drop silent || true on wget of preferences.xml + config.xml. Fail
loud with shell-drop if download or marker grep fails. Background:
airootfs /opt/scripts/validate_preferences.sh restores
/albus/preferences.save (factory defaults, empty network_share) if
xmllint fails. wget failure made every report silently land nowhere.
* Clobber /albus/preferences.save with the same served file so even if
the validator fallback fires, the SMB target survives.
* Bind-mount /dev/null over /sys/power/{state,disk,mem_sleep,autosleep}
before switch_root. Albus's license-retry path writes /sys/power/state
directly (bypassing systemd targets); this is the last-line block.
* /dev/null symlinks for sleep/suspend/hibernate systemd targets in the
airootfs overlay + logind drop-in with IdleAction/Handle*=ignore.
Three independent layers because cmdline systemd.mask alone is bypassed
by direct /sys/power/state writes.
* xinitrc.d/00-no-screen-blank.sh runs xset s off -dpms + setterm
-blank 0 -powerdown 0 so the Blancco GUI doesn't blank during long
erasures.
* Removed the 20-failsafeDriver.conf "modesetting" pin. modesetting
needs DRM/KMS which we disable on kernel cmdline; "vesa" also failed
on NVIDIA. With the pin gone Xorg auto-picks fbdev which uses the
kernel framebuffer from vga=normal - works across Intel, AMD, and
older NVIDIA without nouveau.
playbook/pxe_server_setup.yml:
* dnsmasq.conf: explicit empty-value dhcp-option=3 + dhcp-option=6.
Without them, dnsmasq defaults to sending its own IP as router AND
DNS. Commenting the configured-value lines did NOT disable the push
(root cause of "wired keeps picking up 10.9.100.1 as gateway").
* Split the Blancco config.img extraction and preferences.xml deploy
into separate tasks. The previous shell-with-creates: gate caused
playbook re-runs to skip the prefs deploy entirely after first run.
* Added a validation task that runs python3 xml parse + grep on the
deployed preferences.xml to fail the playbook at deploy time if the
SMB markers are missing.
* Added Environment=TZ=America/New_York to the pxe-webapp systemd
service so report mtimes and audit log render in Eastern time even
if the Python process is started before timedatectl converges.
webapp:
* services/blancco_report.py: parse Blancco's XML report format
(recursive <entries name="..."> walker) into a friendly dict.
* templates/report_view.html: Bootstrap "Drive Erasure Certificate"
layout - hero summary, customer + system cards, per-drive cards with
step-by-step erasure timeline, document signing footer with
integrity hash detail.
* /reports/view/<filename> route + View button on the reports list
(XML reports only; PDFs still download).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The GE Aerospace Shop Floor MCE image type was unused (never had
content on the live PXE server) and cluttered the dashboard. The
GE Legacy Shop Floor MCE entry stays.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The playbook deploys SFLD provisioning packages to
/srv/samba/enrollment/ppkgs/ but the /enrollment route scanned the
share root. Result: every visit reported "no enrollment packages
found" even though three .ppkg files were present.
Add ENROLLMENT_PPKG_DIR (defaults to {ENROLLMENT_SHARE}/ppkgs,
overridable via env var) and point all four enrollment routes at it
(list, upload, download, delete).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Webapp now creates Deploy/Control/Media.tag after every image import.
Cron updated to create (not just touch) Media.tag for any image
directory that has Deploy/Control/.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add startnet.cmd: FlatSetupLoader.exe + Boot.tag/Media.tag eliminates
physical USB requirement for WinPE PXE deployment
- Add Upload-Image.ps1: PowerShell script to robocopy MCL cached images
to PXE server via SMB (Deploy, Tools, Sources)
- Add gea-shopfloor-mce image type across playbook, webapp, startnet
- Change webapp import to move (not copy) for upload sources to save disk
- Add Samba symlink following config for shared image directories
- Add Media.tag creation task in playbook for drive detection
- Update prepare-boot-tools.sh with Blancco config/initramfs patching
- Add grub-efi-amd64-bin to download-packages.sh
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Playbook: detect interface already configured with 10.9.100.1 before
falling back to non-default-gateway heuristic (fixes dnsmasq binding
to wrong NIC when multiple interfaces exist)
- test-vm.sh: auto-attach br-pxe bridge NIC if available on host
- Webapp: add network upload import via SMB share with shared driver
deduplication and symlinks
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Move Flask to localhost:9010, Apache serves port 9009 with static file
handling and reverse proxy to fix intermittent asset loading on remote clients
- Add "PXE Manager" branding beneath logo in sidebar
- Increase code editor size (startnet.cmd and unattend XML) to 70vh
- Add test-lab.sh for full lab VM testing
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add build-proxmox-iso.sh: remaster Ubuntu ISO with autoinstall config,
offline packages, playbook, webapp, and boot files for zero-touch
Proxmox VM deployment
- Add boot-files/ directory for WinPE boot files (wimboot, boot.wim,
BCD, ipxe.efi, etc.) sourced from WestJeff playbook
- Update build-usb.sh and test-vm.sh to bundle boot-files automatically
- Add usb_root variable to playbook, fix all file copy paths to use it
- Unify Apache VirtualHost config (merge default site + webapp proxy)
- Add CSRF token protection to all webapp POST forms and API endpoints
- Update README with Proxmox deployment instructions
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Webapp now listens on port 9009 (UFW rule added)
- Apache reverse proxy updated to proxy to 9009
- test-vm.sh creates a KVM test environment with:
- CIDATA ISO built from project files
- Isolated libvirt network (10.9.100.0/24)
- Ubuntu 24.04 VM with autoinstall
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Samba share at \\server\blancco-reports for automatic report collection
- Webapp reports page with list, download, and delete
- Compliance warning on delete confirmation
- Sidebar link under Tools section
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Added wimtools to offline packages and playbook verification
- Webapp startnet.cmd editor: extract, view, edit, save back to boot.wim
- Uses wimextract/wimupdate for in-place WIM modification
- Dark-themed code editor with tab support and common command reference
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- iPXE boot menu with WinPE, Clonezilla, Blancco Drive Eraser, Memtest86+
- prepare-boot-tools.sh to download/extract boot tool binaries
- Clonezilla backup management in webapp (upload, download, delete)
- Clonezilla Samba share for network backup/restore
- GE Aerospace logo and favicon in webapp
- Updated playbook with boot tool directories and webapp env vars
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Changed from Deploy/Control/unattend.xml to Deploy/FlatUnattendW10.xml
to match the real GE Aerospace image layout.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- webapp/: Flask web management app with:
- Dashboard showing image types and service status
- USB import page for WinPE deployment content
- Unattend.xml visual editor (driver paths, specialize commands,
OOBE settings, first logon commands, raw XML view)
- API endpoints for services and image management
- SETUP.md: Complete setup documentation for streamlined process
- build-usb.sh: Now copies webapp and optional WinPE images to USB
- playbook: Added webapp deployment (systemd service, Apache reverse
proxy), offline package verification, WinPE auto-import from USB
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
