Blocker
- /reports/export returned 500: REPORT_EXPORT_RANGES and _months_ago were
deleted with the old reports route. Restored.
Major
- A session without stage_index/stage_total took down /, /imaging and
/imaging/tiles (int filter on Undefined). The templates default both;
saving a LAPS password for a session that no longer exists is refused
(it created a bare session).
- /reports/todo parsed every report four times (23 s at 700 reports).
blancco_report.parse() now caches by path, mtime and size: 0.09 s.
- Stored XSS through the session serial in the Clear confirm (the
browser decodes ' before running an inline handler). The message
moves to data-confirm, and update_session() only accepts serials of
letters, digits, '.', '_' and '-' (400 from /imaging/status otherwise).
- Reports without a document id and with odd characters in the file name
got a key the mark routes rejected, so they could never be cleared.
report_key() now always produces a valid key.
Minor
- failure_note() handles a list-valued erasure target (500 on the report
and to-do pages).
- _recently_marked() tolerates naive, 'Z' and non-dict state entries.
- Key regexes use fullmatch (a trailing newline was accepted).
- Unreadable reports are no longer counted as to tick / to destroy; the
reports page already flags them as Unreadable.
- Rollback review recounts restorable files after reading the backups.
- Enrollment: the startnet fallback package (no or empty ppkg.conf) and a
quoted SOURCE_PPKG are protected too.
- Backup upload overwrite check is case-insensitive (SMB share) and
replaces the existing file rather than adding a case twin.
- Overview polling keeps the last good rows on an error and pauses while
the tab is hidden. A shown or typed LAPS password survives the floor's
refresh.
- hardware_dismiss only redirects to same-site paths; tiles ?limit is
clamped; the Updates overview survives an unreadable Dell scan or iPXE
state; describe() uses aversion(); a client cannot label its session
'inferred'.
Technician To-Do (sidebar link with a count, and a banner on every page
while anything is open) lists the playbook steps the server cannot do:
1. wipes still to tick on the Onsite Bin RITM (ENT-045/159)
2. monthly evidence packs to upload to Box (ENT-056/158), Mark uploaded
3. drives that failed to wipe, to destroy (COD recorded)
4. reports Blancco could not upload to the cloud (Resolved)
Marks are stored in the Blancco state file; the counts are cached for 60s
and refreshed on every mark, ServiceNow tick and cloud-status post.
Results are now judged per drive. Blancco keeps every attempt in the
report, so a NIST Purge that failed followed by a successful Clear
fallback on the same drive appeared as two entries, and the Reports page
rolled the whole report up to Failed. 20 such wipes since May showed as
Failed; they were wiped (the work instruction counts the fallback as a
success). The CSV marks those rows "Fallback: ... then erased with ...".
One genuine failure remains: HNMD1V3, Seagate Z500R4KG, 2026-08-11.
Automates the Blancco parts of the onsite-support CMMC playbook:
- ENT-056/158 evidence pack: /reports/evidence?month=YYYY-MM returns
ENT-056_<Site>_<YYYY-MM>.zip (summary.csv, README, each report's XML
and PDF). pxe-blancco-evidence.timer saves last month's pack to the
reports share's evidence/ folder on the 1st (Persistent).
- ENT-045/159 ServiceNow tick list: /reports/servicenow lists recent
reports as "Wiped" or "Blancco Wipe failed" with a pre-written
destruction note, copy buttons and Done (CSRF-protected).
- Cloud upload: blancco-progress.py posts each report's upload result
("Sending report document id" -> "Report sent to MC") to
/reports/cloud-status (CSRF-exempt like /imaging/status); the Reports
page and the CSVs show it, so a wipe missing from BMP is visible.
- CSV gains failure_reason (exception messages, failed steps, error
counts), business_location and cloud_upload.
- Preferences: business_location "West Jefferson" (config.BLANCCO_SITE)
and pdf+xml reports; the report copier now copies the PDF too, named
after its XML. .part and hidden files are not listed as reports.
State (cloud confirmations, ServiceNow ticks) is a JSON file at
/var/lib/pxe-webapp/blancco-state.json, off the report share.
/reports/export?range=1m|3m|6m|12m&format=csv|zip. CSV has one row per
erased drive (system and drive serials, standard, result, times, licence
consumption id). ZIP holds the original XML/PDF reports plus summary.csv.
Reports are selected by the date inside each XML, falling back to mtime
only when it is missing. Exports are audit-logged.
End-to-end fixes for Blancco Drive Eraser PXE flow uncovered by chasing
"reports never reach SMB share" across two air-gapped sites:
playbook/blancco-init.sh:
* Drop silent || true on wget of preferences.xml + config.xml. Fail
loud with shell-drop if download or marker grep fails. Background:
airootfs /opt/scripts/validate_preferences.sh restores
/albus/preferences.save (factory defaults, empty network_share) if
xmllint fails. wget failure made every report silently land nowhere.
* Clobber /albus/preferences.save with the same served file so even if
the validator fallback fires, the SMB target survives.
* Bind-mount /dev/null over /sys/power/{state,disk,mem_sleep,autosleep}
before switch_root. Albus's license-retry path writes /sys/power/state
directly (bypassing systemd targets); this is the last-line block.
* /dev/null symlinks for sleep/suspend/hibernate systemd targets in the
airootfs overlay + logind drop-in with IdleAction/Handle*=ignore.
Three independent layers because cmdline systemd.mask alone is bypassed
by direct /sys/power/state writes.
* xinitrc.d/00-no-screen-blank.sh runs xset s off -dpms + setterm
-blank 0 -powerdown 0 so the Blancco GUI doesn't blank during long
erasures.
* Removed the 20-failsafeDriver.conf "modesetting" pin. modesetting
needs DRM/KMS which we disable on kernel cmdline; "vesa" also failed
on NVIDIA. With the pin gone Xorg auto-picks fbdev which uses the
kernel framebuffer from vga=normal - works across Intel, AMD, and
older NVIDIA without nouveau.
playbook/pxe_server_setup.yml:
* dnsmasq.conf: explicit empty-value dhcp-option=3 + dhcp-option=6.
Without them, dnsmasq defaults to sending its own IP as router AND
DNS. Commenting the configured-value lines did NOT disable the push
(root cause of "wired keeps picking up 10.9.100.1 as gateway").
* Split the Blancco config.img extraction and preferences.xml deploy
into separate tasks. The previous shell-with-creates: gate caused
playbook re-runs to skip the prefs deploy entirely after first run.
* Added a validation task that runs python3 xml parse + grep on the
deployed preferences.xml to fail the playbook at deploy time if the
SMB markers are missing.
* Added Environment=TZ=America/New_York to the pxe-webapp systemd
service so report mtimes and audit log render in Eastern time even
if the Python process is started before timedatectl converges.
webapp:
* services/blancco_report.py: parse Blancco's XML report format
(recursive <entries name="..."> walker) into a friendly dict.
* templates/report_view.html: Bootstrap "Drive Erasure Certificate"
layout - hero summary, customer + system cards, per-drive cards with
step-by-step erasure timeline, document signing footer with
integrity hash detail.
* /reports/view/<filename> route + View button on the reports list
(XML reports only; PDFs still download).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
