Reset trigger previously fired only when a new POST landed at idx <= 1,
which meant a reimage didn't reset the dashboard card until
Run-ShopfloorSetup ran post-PPKG (~10-20 min in). With the WinPE-phase
status push from startnet.cmd in commit 4e018fe firing at idx=2, that
earlier signal needs to count as a new-run marker too.
Threshold of 2 makes startnet.cmd the canonical reset point: within
seconds of PXE menu choice on the bay, the dashboard card flips from
the previous run's high-idx state back to "WinPE: PESetup / WIM apply"
+ fresh started_at.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
services/imaging_status.py - if a new POST arrives with stage_index <= 1
that is lower than the cached stage_index, OR the previous run already
finished (status=succeeded|failed), reset the session: clear log_tail,
mint a fresh started_at, drop the status field so the in_progress
default re-applies. Preserves serial + records the previous run's
last_updated under previous_run_at for audit. Without this, a reimage
on the same bay would leave a stale 6/8 "succeeded" card visible until
the new run progressed past that index.
playbook/startnet.cmd - one-line PowerShell POST after the PXE menu
choice + enrollment-share mount, before PESetup.exe waits to start.
Captures BIOS serial via wmic, MAC via Get-NetAdapter, and posts:
stage_index=2, current_stage="WinPE: PESetup / WIM apply".
Best-effort; try/catch swallows any network failure so a missing
webapp never blocks imaging. PXE clients will now appear on the
/imaging dashboard during WinPE phase instead of only post-PPKG.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Adds end-to-end progress tracking for PXE imaging sessions and surfaces
each Blancco report's BIOS serial in the report list.
webapp:
* services/imaging_status.py - JSON-per-serial state store under
IMAGING_DIR (default /var/log/pxe-imaging). Atomic write via
tempfile + rename. log_tail capped at 50 lines. Merges partial
updates so clients can post just the current_stage tick.
* config.py - new IMAGING_DIR env-overridable path.
* services/csrf.py - explicit exempt list for machine-to-machine
endpoints; /imaging/status is the first entry. Air-gapped LAN;
trust-by-network for client posts.
* app.py - four new routes:
GET /imaging dashboard (renders all sessions)
POST /imaging/status client status push (JSON body)
GET /imaging/<serial>.json raw session JSON for ad-hoc polling
POST /imaging/delete/<s> clear a session from the dashboard
Also parses each Blancco XML in the /reports list to surface
system.serial + system.model columns.
* templates/imaging.html - Bootstrap dashboard with per-session
cards (state badge, progress bar, stage idx/total, mac, elapsed,
log tail). meta http-equiv refresh=5 for auto-tick.
* templates/base.html - new "Imaging Progress" nav entry.
* templates/reports.html - Serial + Model columns added.
playbook:
* shopfloor-setup/Shopfloor/lib/Send-PxeStatus.ps1 - new helper.
Dot-source this then call Send-PxeStatus -Stage X -StageIndex N
-StageTotal M from any stage script. BIOS serial via CIM, MAC via
Get-NetAdapter, pctype + machinenumber from C:\Enrollment.
Failures are swallowed to a local log so a network blip doesn't
block imaging.
* shopfloor-setup/Run-ShopfloorSetup.ps1 - dot-sources helper +
posts at three coarse milestones (start, PPKG enrollment,
handoff to Monitor-IntuneProgress).
* shopfloor-setup/gea-shopfloor-keyence/09-Setup-Keyence.ps1 -
posts at session start + after Install-FromManifest with
succeeded/failed status derived from $rc. Other 09-Setup-*.ps1
scripts can follow the same pattern.
ID is BIOS serial (stable across WinPE -> Windows transition and
across reboots, unlike hostname which is random pre-PPKG). Operator
already knows the serial of the bay they imaged.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
End-to-end fixes for Blancco Drive Eraser PXE flow uncovered by chasing
"reports never reach SMB share" across two air-gapped sites:
playbook/blancco-init.sh:
* Drop silent || true on wget of preferences.xml + config.xml. Fail
loud with shell-drop if download or marker grep fails. Background:
airootfs /opt/scripts/validate_preferences.sh restores
/albus/preferences.save (factory defaults, empty network_share) if
xmllint fails. wget failure made every report silently land nowhere.
* Clobber /albus/preferences.save with the same served file so even if
the validator fallback fires, the SMB target survives.
* Bind-mount /dev/null over /sys/power/{state,disk,mem_sleep,autosleep}
before switch_root. Albus's license-retry path writes /sys/power/state
directly (bypassing systemd targets); this is the last-line block.
* /dev/null symlinks for sleep/suspend/hibernate systemd targets in the
airootfs overlay + logind drop-in with IdleAction/Handle*=ignore.
Three independent layers because cmdline systemd.mask alone is bypassed
by direct /sys/power/state writes.
* xinitrc.d/00-no-screen-blank.sh runs xset s off -dpms + setterm
-blank 0 -powerdown 0 so the Blancco GUI doesn't blank during long
erasures.
* Removed the 20-failsafeDriver.conf "modesetting" pin. modesetting
needs DRM/KMS which we disable on kernel cmdline; "vesa" also failed
on NVIDIA. With the pin gone Xorg auto-picks fbdev which uses the
kernel framebuffer from vga=normal - works across Intel, AMD, and
older NVIDIA without nouveau.
playbook/pxe_server_setup.yml:
* dnsmasq.conf: explicit empty-value dhcp-option=3 + dhcp-option=6.
Without them, dnsmasq defaults to sending its own IP as router AND
DNS. Commenting the configured-value lines did NOT disable the push
(root cause of "wired keeps picking up 10.9.100.1 as gateway").
* Split the Blancco config.img extraction and preferences.xml deploy
into separate tasks. The previous shell-with-creates: gate caused
playbook re-runs to skip the prefs deploy entirely after first run.
* Added a validation task that runs python3 xml parse + grep on the
deployed preferences.xml to fail the playbook at deploy time if the
SMB markers are missing.
* Added Environment=TZ=America/New_York to the pxe-webapp systemd
service so report mtimes and audit log render in Eastern time even
if the Python process is started before timedatectl converges.
webapp:
* services/blancco_report.py: parse Blancco's XML report format
(recursive <entries name="..."> walker) into a friendly dict.
* templates/report_view.html: Bootstrap "Drive Erasure Certificate"
layout - hero summary, customer + system cards, per-drive cards with
step-by-step erasure timeline, document signing footer with
integrity hash detail.
* /reports/view/<filename> route + View button on the reports list
(XML reports only; PDFs still download).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
