Adds a pcProfiles section to site-config.json that lets each PC type (and
optional sub-type) override startupItems, taskbarPins, and desktopApps.
Scripts resolve: pcProfile > site-wide default > hardcoded fallback.
New shared helper: Shopfloor/lib/Get-PCProfile.ps1
Dot-sourced by consuming scripts. Reads pc-type.txt + pc-subtype.txt,
builds a profile key (e.g. "Standard-Machine"), and looks it up in
site-config.json pcProfiles. Exports $siteConfig, $pcType, $pcSubtype,
$profileKey, $pcProfile for the caller to use.
Replaces the inline Get-SiteConfig function that was copy-pasted into
each script. Scripts now do:
. "$PSScriptRoot\lib\Get-PCProfile.ps1"
instead of duplicating the loader.
startnet.cmd changes:
- Added Lab as PC type option (7)
- Standard now has a sub-type menu: Timeclock / Machine
- Display sub-type menu also writes PCSUBTYPE for consistency
- pc-subtype.txt written alongside pc-type.txt when sub-type selected
- site-config.json copied from enrollment share to W:\Enrollment\
site-config.json v2.0:
- New pcProfiles section with profiles for:
Standard-Timeclock, Standard-Machine, CMM, Genspect, Keyence,
WaxAndTrace, Lab, Display-Lobby, Display-Dashboard
- CMM/Genspect/Keyence/WaxAndTrace profiles have TODO comments for
type-specific apps (placeholder with WJ Shopfloor baseline only)
- Lab/Display profiles have empty startupItems and desktopApps
- Top-level startupItems/taskbarPins/desktopApps remain as site-wide
defaults (used when no profile matches)
Updated scripts:
06-OrganizeDesktop.ps1 - desktopApps from profile > site > hardcoded
07-TaskbarLayout.ps1 - taskbarPins from profile > site > hardcoded
08-EdgeDefaultBrowser.ps1 - uses shared profile loader
Configure-PC.ps1 - startupItems from profile > site > hardcoded
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
New site-config.json file at C:\Enrollment\ (staged by startnet.cmd from
the enrollment share) contains all West Jefferson-specific values that were
previously hardcoded across 7 scripts. To deploy at a different GE site,
clone site-config.json and change the values - scripts need zero changes.
Config schema (v1.0):
siteName / siteNameCompact - UDC/eDNC site args
urls{} - Edge startup tab fallback URLs
edgeStartupTabs[] - ordered tab list with .url file basenames
opentext{} - excluded .hep profiles and .lnk shortcuts
startupItems[] - Configure-PC toggle list (exe/existing/url)
taskbarPins[] - 07-TaskbarLayout pin order with lnk paths
desktopApps[] - 06-OrganizeDesktop Phase 2 app list
Every script uses the same inline Get-SiteConfig helper that reads the
JSON and returns $null if missing/corrupt. All consumers fall back to the
current hardcoded West Jefferson defaults when $siteConfig is null, so
PXE servers without a site-config.json continue working identically.
Scripts updated:
06-OrganizeDesktop.ps1 - desktopApps array from config
07-TaskbarLayout.ps1 - pinSpec array from config
08-EdgeDefaultBrowser.ps1 - startup tab loop from config
Configure-PC.ps1 - startup items + site name from config
Check-MachineNumber.ps1 - site name from config
Set-MachineNumber.ps1 - site name from config
01-eDNC.ps1 - siteName + siteNameCompact from config
startnet.cmd - copies site-config.json from enrollment share
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
New tools:
Configure-PC.bat/.ps1 - Interactive desktop tool for SupportUser to
configure a shopfloor PC after imaging. Two sections:
1. Machine number: if UDC/eDNC are still at placeholder 9999, prompt
to set the real number right now (updates UDC JSON + eDNC registry,
restarts UDC.exe with new args).
2. Auto-startup toggle: pick which apps start at user logon from a
numbered list (UDC, eDNC, Defect Tracker, WJ Shopfloor, Plant Apps).
Creates/removes .lnk files in AllUsers Startup folder. Toggle UI
shows [ON]/[ ] state, safe to re-run anytime. Plant Apps URL
resolved from .url file at runtime with hardcoded fallback to
https://mes-wjefferson.apps.lr.geaerospace.net/run/...
3. Item 6 in the toggle list: register/unregister a "Check Machine
Number" logon task for standard (non-admin) users. When enabled,
the task fires at every logon, checks for 9999, pops an InputBox
if found, updates both apps, then unregisters itself on success.
Check-MachineNumber.ps1 - The logon task script. Runs as the logged-in
user (needs GUI for InputBox), not SYSTEM. Writing to ProgramData + HKLM
is possible because 02-MachineNumberACLs.ps1 pre-grants BUILTIN\Users
write access on the two specific targets during imaging.
02-MachineNumberACLs.ps1 - Standard type-specific script (runs after
01-eDNC.ps1). Opens C:\ProgramData\UDC\udc_settings.json for Users:Modify
and HKLM:\...\GE Aircraft Engines\DNC\General for Users:SetValue. Narrow
scope, not blanket admin.
Execution order fixes in Run-ShopfloorSetup.ps1:
The dispatcher now has two lists: $skipInBaseline (scripts NOT run in the
alphabetical baseline loop) and $runAfterTypeSpecific (scripts run
explicitly after type-specific scripts complete). This fixes the bug where
06/07 ran before 01-eDNC.ps1 installed DnC, so eDNC/NTLARS shortcuts were
silently skipped.
New execution order:
Baseline: 00-PreInstall, 04-NetworkAndWinRM (skipping 05-08 + tools)
Type-specific: 01-eDNC, 02-MachineNumberACLs
Finalization: 06-OrganizeDesktop, 07-TaskbarLayout
06 internally calls 05 (Office shortcuts, Phase 0) and 08 (Edge config,
Phase 4) as sub-phases, so they also benefit from running late. Office
isn't installed until after the first reboot (ppkg streams C2R), so 05
no-ops at imaging time but succeeds when 06's SYSTEM logon task re-runs
it on the second boot. 08 resolves startup-tab URLs from .url files
delivered by DSC (even later); same self-heal via the logon task.
Other fixes in this commit:
- OpenText Setup-OpenText.ps1 Step 4: exclude WJ_Office.lnk, IBM_qks.lnk,
mmcs.lnk desktop shortcuts (matching the Step 3 .hep profile exclusion
from the previous commit). Removes stale copies from prior installs.
- 05-OfficeShortcuts.ps1: widened Office detection to 6 path variants
covering C2R + MSI + Office15/16, with diagnostic output on miss.
- 06-OrganizeDesktop.ps1: removed Phase 3 (desktop-root pin copies for
eDNC/NTLARS) so shortcuts live in Shopfloor Tools only, not duplicated
at root. Emptied $keepAtRoot. Added Phase 0 (call 05) and Phase 4
(call 08). Lazy folder creation + empty-folder cleanup. Scheduled task
now runs as SYSTEM (was BUILTIN\Users with Limited which failed the
admin check). Added NTLARS to 07's taskbar pin list.
- 08-EdgeDefaultBrowser.ps1: Plant Apps URL fallback hardcoded from
device-config.yaml.
- All new scripts have Start-Transcript logging to C:\Logs\SFLD\ with
timestamps and running-as identity.
- Run-ShopfloorSetup.ps1: Start-Transcript + Stop-Transcript wrapping
entire dispatcher run, writes to C:\Logs\SFLD\shopfloor-setup.log.
Configure-PC.bat added to SupportUser desktop copy list.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
