goCMM (.NET x86) stores its program-source path in HKLM\SOFTWARE\
WOW6432Node\General Electric\goCMM value 'Shared Data Directory'. Being
HKLM, a non-admin shopfloor user cannot set it via goCMM's UI (nor save a
Selected Part Group switch). 09-Setup-CMM Step 2.7 now seeds the per-bay
path (admin context at imaging) and grants BUILTIN\Users write on the key,
mirroring the existing Step 2.5 install-dir ACL grant.
- cmm-bay-config.csv: add shared_data_dir column (per-bay paths, CMM1-12).
- resolve-cmm-bay-config.ps1: write C:\Enrollment\cmm\shareddatadir.txt
(space-safe; e.g. CMM8 'Venture CMM8').
- 09-Setup-CMM.ps1: Step 2.7 reg seed + Users ACL on the goCMM key.
Not yet deployed to the live server (held).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add bay picker (same arrow-key pattern as waxtrace) that maps CMM1-12
to a PC-DMIS version (2016/2019/2026) and DODA flag via cmm-bay-config.csv.
startnet.cmd: replace Standard/DODA submenu with bay picker. Writes
CMMID (e.g. CMM4) to machine-number.txt so the existing
TargetMachineNumbers filter on the SFLD share manifest gates per-bay
entries with no lib changes.
09-Setup-CMM: reads resolved version.txt and filters cmm-manifest.json
by _CmmVersion tag at imaging time so only the matched PC-DMIS version
installs.
cmm-manifest.json: add PC-DMIS 2026.1 entry (patched MSI, product code
{81BACE1B-FB08-4DCF-8100-79911AD3EC1E}) and DODA entry (flat zip extract
to C:\Apps\DODA\). Existing 2016/2019 entries tagged with _CmmVersion.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
09-Setup-CMM: add Step 2.6 that launches each installed PC-DMIS
version once as admin before the PPKG locks the machine down. Also
adds PC-DMIS 2026.1 to the ACL directory list.
Controller credential: cmdkey /add under SYSTEM stored creds in the
wrong vault. Switch to a Register script (MarkerFile detection, runs
once) that creates an AtLogOn scheduled task under BUILTIN\Users so
cmdkey runs in the ShopFloor user's session.
IE compat: update test matrix hash for the new site list that adds
wjfms3.apps.wlm.geaerospace.net.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Carries over the lessons learned from wax/trace + Keyence imaging today
and threads the same pattern through the CMM path.
09-Setup-CMM.ps1:
- Pass PCType + PCSubType to Install-FromManifest so the manifest's
per-entry PCTypes filter is honored. Without this every entry runs
regardless of bay variant - the same bug Keyence had before per-model
gating was added.
- Move bootstrap cleanup to a conditional that only deletes
C:\CMM-Install once every (filter-applicable) manifest entry detects
as installed. If a Hexagon installer forces an unplanned reboot
mid-install, the new Run-ShopfloorSetup self-resume RunOnce fires on
the next auto-login; the staging dir needs to still be on disk for
the re-run to recover. Logs "retained ... not all entries installed
yet - will retry on next self-resumed run" when partial.
cmm-manifest.json:
- Drop exact DetectionValue from PC-DMIS 2016, PC-DMIS 2019 R2, CLM
1.8.73, and goCMM. Detection is now uninstall-key presence only, so
a Hexagon security patch that bumps the DisplayVersion does not
trigger a re-install loop with exit 1638 every GE-Enforce cycle.
Bumping the installer in apps/ is the upgrade path - manifest engine
detection should not also be a version drift catcher for vendor MSIs
whose backward-compat is established by the vendor.
- Specific to goCMM: the installer filename version (1.1.6718.31289)
does not match what the installer registers under its uninstall key.
Dropping DetectionValue silences the false-mismatch loop the prior
version would have triggered.
- Add DODA placeholder entry gated to PCTypes=["cmm-doda"]. Real
Installer filename, args, and DetectionPath still TODO once the
DODA binary is sourced + dropped at installers-post/cmm/.
startnet.cmd:
- Add :cmm_submenu after the user picks gea-shopfloor-cmm from the
main menu. Two options: Standard (default PC-DMIS + CLM + goCMM
+ Protect Viewer) or With DODA. Mirrors :keyence_submenu pattern.
- Write CMMVARIANT to W:\Enrollment\pc-subtype.txt so Install-FromManifest
on the bay can apply the PCTypes filter against gea-shopfloor-cmm-doda.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Previously the stage indices reflected logical milestones but not the
order they fire in. Run-ShopfloorSetup posted idx=1 (start) and idx=4
(PPKG) - but 09-Setup-Keyence (inside per-type loop) ran BETWEEN them
and posted idx=5/6. The dashboard then "regressed" from 6 back to 4
when PPKG fired, making it look stuck at the per-type-complete card.
New numbering matches actual execution order:
1 - WinPE: PESetup / WIM apply (startnet.cmd)
2 - Run-ShopfloorSetup: starting (Run-ShopfloorSetup.ps1)
3 - 09-Setup-<Type>: starting (per-type)
4 - 09-Setup-<Type>: complete (per-type)
5 - Run-ShopfloorSetup: PPKG enrollment (Run-ShopfloorSetup.ps1)
6 - Run-ShopfloorSetup: handoff to Monitor (Run-ShopfloorSetup.ps1)
7 - Monitor-IntuneProgress: Intune Device ID captured
services/imaging_status.py rewind threshold reverts to stage_index <= 1
now that WinPE startnet posts idx=1.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Wires the imaging-progress helper into the three PC-type setup scripts
that were either clean (CMM) or untracked (Common, Heattreat). Each
gains two calls per the pattern committed for Keyence in 9122b28:
* idx 5/8 - "09-Setup-<Type>: starting" right after the session start banner
* idx 6/8 - "09-Setup-<Type>: complete" just before the completion banner
Display, Genspect, and WaxAndTrace also got the same two-line additions
locally and on the live server, but those files have pre-existing WIP
edits intermixed so they aren't staged here. They'll travel along
when the operator commits their unrelated shopfloor work.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Pairs with Phase 1+2 from earlier (alias maps in Install-FromManifest,
GE-Enforce, Get-PCProfile, verify-state). See project-shopfloor-rename-reorg
memory for the plan.
Phase 3 (repo + paths):
- git mv per-PC-type dirs to gea-shopfloor-* names:
Standard -> gea-shopfloor-collections
CMM -> gea-shopfloor-cmm
Keyence -> gea-shopfloor-keyence
Genspect -> gea-shopfloor-genspect
WaxAndTrace -> gea-shopfloor-waxtrace
Display -> gea-shopfloor-display
Lab -> gea-shopfloor-common (folded; Timeclock+Lab merge)
- New gea-shopfloor-nocollections/ (clone of collections sans UDC scripts).
- New gea-shopfloor-heattreat/ (placeholder, README only).
- Move Standard/ntlars-backups/ -> _ntlars-backups/ (per-MN, not per-type).
- Run-ShopfloorSetup.ps1: Resolve-PCTypeDir helper walks alias group when
the on-disk dir for the current pcType is missing. Set-MachineNumber
helper-copy gated on collections|nocollections|legacy Standard-Machine.
- Update-MachineNumber.ps1: pcProfiles lookups try gea-shopfloor-collections
first, fall back to legacy Standard-Machine. PowerShell 5.1 compatible
(no null-coalesce).
Phase 4 (startnet.cmd menu):
- Choice 3 "GEA Shopfloor" now drills into a 9-item sub-menu instead of
going straight to enrollment. Sub-cats:
1. Machine with Collections -> gea-shopfloor-collections
2. Machine without Collections -> gea-shopfloor-nocollections
3. Common (Timeclock, Lab) -> gea-shopfloor-common
4. Keyence -> gea-shopfloor-keyence
5. CMM -> gea-shopfloor-cmm
6. Genspect -> gea-shopfloor-genspect
7. Heattreat -> gea-shopfloor-heattreat
8. Wax and Trace -> gea-shopfloor-waxtrace
9. Display -> gea-shopfloor-display
- Office menu (existing 6-option) follows for every sub-cat.
- Machine number prompt only for collections + nocollections.
- pc-subtype.txt + display-type.txt no longer written. PCTYPE is a
single full string (gea-shopfloor-*); subtype-aware code paths fall
back to empty and resolve via the alias map.
- CMM bootstrap stage gate switched from "%PCTYPE%"=="CMM" to
"%PCTYPE%"=="gea-shopfloor-cmm".
Test harness:
- B-enforce/run.sh PCSUBTYPE default changed from "Machine" to "" so
single-arg invocation matches the new single-string scheme. Two-arg
legacy form ("Standard Machine") still works via aliasing.
- B-enforce/tamper.ps1 alias-aware Test-MatrixEntryMatches mirroring
verify-state.ps1.
Smoke-tested on win11 VM as SYSTEM via qga: B-enforce harness 5-phase
cycle (stage / baseline / tamper / heal / idempotent) passes 10/10
with PCType=gea-shopfloor-collections AND with legacy "Standard Machine"
two-arg form.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
