# Shopfloor Display MicroPC Imaging Guide

## Prerequisites
- MicroPC connected to PXE switch
- USB mouse and keyboard connected
- PXE server running and reachable

## Step 1: BIOS Configuration

1. Power on the MicroPC and **tap F12** to reach the One-Time-Boot menu.
2. Select **BIOS Setup**.
3. Enable **Advanced Setup**.
4. Select **Boot Configuration**:
   - Verify **Enable Secure Boot** is **ON**
   - Verify **Enable Microsoft UEFI CA** is set to **Enabled**
5. Select **Storage**:
   - Verify **AHCI/NVMe** is selected
6. Select **Connection**:
   - Verify **Integrated NIC** is set to **Enabled with PXE**
7. Click **Apply Changes**, then click **OK**.
8. Click **Exit** and immediately begin **tapping F12** again.

## Step 2: PXE Boot

1. Once you're back in the One-Time-Boot menu, select the **IPV4** option.
2. In the PXE Boot Menu, select **Windows PE (Image Deployment)** (auto-selected after 30 seconds).
3. Hit any key to verify Secure Boot is enabled, or wait 5 seconds to automatically continue.

## Step 3: Image Selection

1. For the WinPE Setup Menu, select **3. GEA Shopfloor**.
2. For GCCH Enrollment Profile, select **1. No Office**.
3. For Shopfloor PC Type, select **5. Display**.
4. For Display Type, select **2. Dashboard**.

## Step 4: Imaging

1. Once GE Image Setup launches, click **Start**.
2. From this point the process is mostly automated.
3. Note the **Serial Number** from the screen and let Patrick know it's a Shopfloor Display.