---
- name: PXE Server Setup (Ubuntu with dnsmasq)
  hosts: localhost
  connection: local
  become: yes
  gather_facts: yes

  pre_tasks:
    # Per-site values (NIC MACs first of all). Optional file next to this
    # playbook; -e still wins over it.
    - name: "Look for per-site vars (playbook/site-vars.yml)"
      stat:
        path: "{{ playbook_dir }}/site-vars.yml"
      register: site_vars_file

    - name: "Load per-site vars"
      include_vars:
        file: "{{ playbook_dir }}/site-vars.yml"
      when: site_vars_file.stat.exists

    - name: "Verify required packages are installed (pre-installed from offline .debs)"
      command: dpkg -s {{ item }}
      loop:
        - dnsmasq
        - apache2
        - samba
        - unzip
        - ufw
        - cron
        - ansible
        - wimtools
        - conntrack
        - networkd-dispatcher  # carrier hook (pxe-nic-carrier)
        - sbsigntool    # sbverify: iPXE update signature checks
        - p7zip-full    # 7z: Dell driver packs, catalog cabs, Blancco ISO
        - zip           # driver zips PESetup unpacks
        - curl          # Updates page downloads
        - shim-signed   # shimx64.efi.signed: Blancco with Secure Boot on
      register: pkg_check
      failed_when: false
      changed_when: false

    - name: "Warn about missing packages"
      debug:
        msg: "WARNING: {{ item.item }} is not installed! Install offline .debs first."
      loop: "{{ pkg_check.results }}"
      when: item.rc != 0

  vars:
    tftp_dir: "/srv/tftp"
    web_root: "/var/www/html"
    samba_share: "/srv/samba/winpeapps"
    usb_mount: "/mnt/usb/playbook"     # playbook location on USB
    usb_root: "/mnt/usb"               # CIDATA partition root
    # Secure Boot iPXE chain, fetched into boot-files/ by scripts/fetch-ipxe.sh
    # (keep these pins in step with that script). Every UEFI client gets the
    # dual-signed shim (Microsoft UEFI CA 2011 + 2023), which loads ipxe.efi
    # from the TFTP root: the release's SNPONLY build (firmware network and
    # USB drivers; the full ipxe.efi drives USB itself and kills USB
    # keyboards at the menu). The old Broadcom-signed 1.21.1 build stays on
    # the box as ipxe-bcm.efi, the rollback.
    ipxe_tarball_sha256: "01a526d4cc791fc30362259c609d6c506cc64a7bdff51b9a5eb788354e17eee1"   # ipxe v2.0.0 ipxeboot.tar.gz
    ipxe_shim_sha256: "5eecca2780bd49c900565e124516a1bd666ec5e012825f34991b6ba1ef2fa6cf"      # ipxe/shim ipxe-16.1 ipxe-shimx64.efi
    ipxe_snponly_sha256: "b1e67c3e4a1e8708ddfd0079ad4505e3a02245acb55ee9a95437ab3c507be82a"   # x86_64-sb/snponly.efi
    ipxe_bios_sha256: "0fb21c695c82fd70d4f89732ddcd285063776e2bbd71de9a2c39e9cfe4b180b8"      # x86_64/ipxe.pxe
    # Release the pins above come from. A re-run does not replace files the
    # webapp's Updates page installed from a NEWER release (installed.json).
    ipxe_release_tag: "v2.0.0"
    # Zscaler Root CA: GE's Zscaler re-signs GitHub TLS, so the iPXE update
    # check fails without it. Repo copy first, else the copy on the image share.
    zscaler_ca_src: "{{ playbook_dir }}/certs/zscaler-root-ca.crt"
    # _media/<pctype> links the base image's entries, so also look in the
    # image roots (on a rebuild the _media views may not exist yet).
    zscaler_ca_share_glob: "{{ samba_share }}/_media/*/Deploy/Applications/ZscalerCommercialCertificate-2048-SHA256.crt {{ samba_share }}/gea-*/Deploy/Applications/ZscalerCommercialCertificate-2048-SHA256.crt"
    # --- The two NICs (site standard) ---
    # Every server has two NICs: the imaging NIC (isolated imaging LAN,
    # static pxe_server_ip, the ONLY NIC that serves DHCP/TFTP/HTTP boot/SMB)
    # and the GE corporate NIC (DHCP client; SSH and the webapp on 9009 for
    # admins, outbound updates through Zscaler). Both MACs are REQUIRED:
    # set them in playbook/site-vars.yml on the USB (copy
    # site-vars.example.yml) or with -e. The playbook stops before it
    # touches anything if either is unset or not on this box. Read them
    # with: ip -br link
    pxe_nic_mac: ""
    corp_nic_mac: ""
    # Stable names, set by netplan (match macaddress + set-name). dnsmasq,
    # UFW and Samba refer to these. A site may keep its existing names
    # (e.g. pxe_nic_name: enx34c8d6b11010, corp_nic_name: enp0s31f6).
    pxe_nic_name: "pxe0"
    corp_nic_name: "corp0"
    # Imaging LAN addressing. NOTE: 172.16.9.1 is also hard-coded in the
    # iPXE menu, startnet.cmd, blancco-preferences.xml and the unattend
    # files (see docs/SITE-CUSTOMIZATION.md); change those together.
    pxe_server_ip: "172.16.9.1"
    pxe_subnet: "172.16.9.0/24"
    pxe_prefix: "{{ pxe_subnet.split('/')[1] }}"
    pxe_dhcp_start: "172.16.9.10"
    pxe_dhcp_end: "172.16.9.100"
    pxe_dhcp_lease: "12h"
    # Route metric for the corp NIC's DHCP default route.
    corp_route_metric: 100
    # NIC guard (pxe-nic-check): dnsmasq must never serve DHCP/PXE on the GE
    # corporate network. These are derived from pxe_nic_mac / corp_nic_mac
    # (one source of truth) and written to /etc/pxe-server/nic.conf; do not
    # set them separately (the playbook fails if they disagree). A MAC of a
    # bridge port resolves to the bridge.
    pxe_imaging_mac: "{{ pxe_nic_mac }}"
    pxe_ge_mac: "{{ corp_nic_mac }}"
    # A foreign DHCP server handing out one of these domains (whole labels:
    # wjs.geaerospace.net matches, notgeaerospace.net does not) = GE network.
    pxe_corp_domain_suffixes: "geaerospace.net, ge.com"
    # Only if the IMAGING switch is itself managed and sends LLDP/CDP: its
    # LLDP system name / CDP device id / chassis MAC, comma separated, so
    # it does not count as a corporate switch. 802.1X always counts.
    pxe_nic_allowed_switches: ""
    # UFW, per interface (see the UFW tasks). Imaging NIC: SSH, DHCP, TFTP,
    # HTTP boot, iPXE menu, SMB (+ NetBIOS for older clients), webapp.
    ufw_pxe_rules:
      - { port: "22", proto: tcp }
      - { port: "67", proto: udp }
      - { port: "69", proto: udp }
      - { port: "80", proto: tcp }
      - { port: "4433", proto: tcp }
      - { port: "445", proto: tcp }
      - { port: "139", proto: tcp }
      - { port: "137", proto: udp }
      - { port: "138", proto: udp }
      - { port: "9009", proto: tcp }
    # GE corporate NIC: SSH and the webapp, nothing else.
    ufw_corp_rules:
      - { port: "22", proto: tcp }
      - { port: "9009", proto: tcp }
    # Who may reach SSH and the webapp (9009, no login, runs as root) on the
    # GE corporate NIC. Empty (the default) = all of GE, as before, with a
    # loud warning every run. Set to the admin subnets/hosts, e.g.
    # ["10.134.48.0/24", "3.12.34.56/32"]: UFW then allows 22 and 9009 on
    # the corp NIC from these only. The play refuses to restrict if your own
    # SSH session is not inside one of them. See docs/SITE-CUSTOMIZATION.md.
    corp_admin_cidrs: []
    # false: sshd refuses password logins except from the imaging subnet
    # and localhost (keys only from the GE side). Default true keeps the
    # shared 'pxe' password working from GE, so nobody is locked out; the
    # play refuses false while the pxe user has no authorized_keys.
    corp_ssh_password_auth: true
    # Re-run safety: when imaging is in progress (SMB sessions open on 445
    # or DHCP leases granted in the last pxe_busy_window_min minutes) a
    # re-run does not bounce the NICs or restart dnsmasq/Apache/Samba.
    # A needed network change then stops the play with a message;
    # -e allow_disruptive=true overrides.
    allow_disruptive: false
    pxe_busy_window_min: 30
    # networkd-dispatcher states the carrier hook (pxe-nic-carrier) runs in.
    carrier_hook_states:
      - carrier.d
      - degraded.d
      - degraded-carrier.d
      - enslaved.d
      - routable.d
      - no-carrier.d
      - off.d
    # The admin's SSH client (empty when not run over SSH, or when sudo
    # dropped SSH_CONNECTION; the checks also read sshd's live peers).
    pxe_ssh_client: "{{ (lookup('env', 'SSH_CONNECTION') | default('', true)).split(' ')[0] }}"
    # --- Blancco UEFI / Secure Boot path ---
    # Blancco's UEFI entries boot a Canonical-signed Ubuntu HWE kernel
    # (through Ubuntu's shim when Secure Boot is on), then switch_root into
    # the Blancco rootfs. The kernel, its modules and the initramfs are
    # built from this version, which must be installed on the box
    # (linux-generic-hwe-24.04 from the offline packages; see
    # scripts/download-packages.sh BLANCCO_KVER). The file suffix is
    # major+minor ("7.0.0-34-generic" -> "70"), as GetPxeScript.aspx expects:
    # vmlinuz-ubuntu-70, kexec-initrd-70.img; modules are
    # kmod-<blancco_kver>.tar.gz (blancco-init.sh fetches kmod-$(uname -r)).
    # The pin lives in three places; this var is the source:
    #   1. here (blancco_kver)
    #   2. scripts/download-packages.sh reads its BLANCCO_KVER default from
    #      this line (packages linux-image/modules-<kver>)
    #   3. playbook/ipxe/GetPxeScript.aspx names the files by suffix
    #      (vmlinuz-ubuntu-70, kexec-initrd-70.img); the play fails if that
    #      suffix is not blancco_ksuffix.
    blancco_kver: "7.0.0-34-generic"
    blancco_ksuffix: "{{ blancco_kver.split('.')[0] }}{{ blancco_kver.split('.')[1] }}"
    image_types:
      - gea-standard
      - gea-engineer
      - gea-shopfloor
    shopfloor_types:
      - gea-shopfloor
    # Image variants that share the generic Win10/Win11 unattend
    # (gea-standard and gea-engineer both deploy Win11 Pro 24H2 now; the same
    # unattend file drives both because the RunSynchronous entries are
    # OS-version-agnostic).
    standard_types:
      - gea-standard
      - gea-engineer
    deploy_subdirs:
      - Applications
      - Control
      - "Operating Systems"
      - "Out-of-box Drivers"
      - Packages
      - Tools

  tasks:
    # --- The two NICs: validate, then pin by MAC (netplan) ---
    # Replaces the old guess (first en* without 172.16.9.1 / the default
    # route), which on a two-NIC box could pick the GE NIC.
    - name: "NICs: check the per-site NIC vars"
      assert:
        that:
          - pxe_nic_mac | length > 0
          - corp_nic_mac | length > 0
          - pxe_nic_mac is match('^([0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}$')
          - corp_nic_mac is match('^([0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}$')
          - pxe_nic_mac | lower != corp_nic_mac | lower
          - pxe_imaging_mac | lower == pxe_nic_mac | lower
          - pxe_ge_mac | lower == corp_nic_mac | lower
          - pxe_nic_name | length > 0 and pxe_nic_name | length <= 15
          - corp_nic_name | length > 0 and corp_nic_name | length <= 15
          - pxe_nic_name != corp_nic_name
        fail_msg: >-
          Set pxe_nic_mac (imaging NIC) and corp_nic_mac (GE corporate NIC)
          to two different MACs (aa:bb:cc:dd:ee:ff) in playbook/site-vars.yml
          (copy site-vars.example.yml) or with -e, then re-run. Do not set
          pxe_imaging_mac / pxe_ge_mac yourself; they follow these. Names
          (pxe_nic_name, corp_nic_name) must differ and be 1-15 chars.
          Now: pxe_nic_mac='{{ pxe_nic_mac }}' corp_nic_mac='{{ corp_nic_mac }}'.
        quiet: yes

    - name: "NICs: list the physical NICs on this box"
      shell: |
        for d in /sys/class/net/*; do
          [ -e "$d/device" ] || continue
          echo "$(basename "$d") $(cat "$d/address")"
        done
      register: nic_list
      changed_when: false

    - name: "NICs: both MACs must be on this box"
      vars:
        box_macs: "{{ nic_list.stdout_lines | map('regex_replace', '^.* ', '') | map('lower') | list }}"
      assert:
        that:
          - pxe_nic_mac | lower in box_macs
          - corp_nic_mac | lower in box_macs
        fail_msg: >-
          {{ 'pxe_nic_mac ' ~ pxe_nic_mac ~ ' is not on this box. ' if pxe_nic_mac | lower not in box_macs else '' }}{{ 'corp_nic_mac ' ~ corp_nic_mac ~ ' is not on this box. ' if corp_nic_mac | lower not in box_macs else '' }}Nothing was changed (the network config would have left that NIC
          unconfigured). Physical NICs here (name MAC):
          {{ nic_list.stdout_lines | join('; ') }}.
          Fix playbook/site-vars.yml and re-run.
        quiet: yes

    # --- Re-run safety (nothing below changes the box until these pass) ---
    - name: "Re-run safety: is imaging in progress? (SMB sessions, recent DHCP leases)"
      args:
        executable: /bin/bash
      shell: |
        smb=$(ss -Htn state established '( sport = :445 )' 2>/dev/null | wc -l)
        recent=0
        L=/var/lib/misc/dnsmasq.leases
        lease="{{ pxe_dhcp_lease }}"
        case "$lease" in
          *[0-9]d) secs=$(( ${lease%d} * 86400 )) ;;
          *[0-9]h) secs=$(( ${lease%h} * 3600 )) ;;
          *[0-9]m) secs=$(( ${lease%m} * 60 )) ;;
          *[0-9]s) secs=${lease%s} ;;
          *[0-9])  secs=$lease ;;
          *) secs=0 ;;
        esac
        if [ -f "$L" ] && [ "$secs" -gt 0 ]; then
          # Field 1 is the expiry; granted = expiry - lease time.
          recent=$(awk -v now="$(date +%s)" -v lease="$secs" -v win="{{ (pxe_busy_window_min | int) * 60 }}" \
            '$1 > 0 && ($1 - lease) > (now - win) {n++} END {print n + 0}' "$L")
        fi
        echo "$smb $recent"
      register: pxe_busy
      changed_when: false

    - name: "Re-run safety: decide"
      set_fact:
        pxe_busy_smb: "{{ pxe_busy.stdout.split()[0] | int }}"
        pxe_busy_leases: "{{ pxe_busy.stdout.split()[1] | int }}"
        pxe_hold_disruptive: "{{ ((pxe_busy.stdout.split()[0] | int) > 0 or (pxe_busy.stdout.split()[1] | int) > 0) and not (allow_disruptive | bool) }}"

    - name: "Re-run safety: imaging in progress, disruptive steps are held"
      debug:
        msg: >-
          {{ pxe_busy_smb }} SMB session(s) open and {{ pxe_busy_leases }}
          DHCP lease(s) granted in the last {{ pxe_busy_window_min }} min:
          imaging looks active. This run will NOT bounce the NICs or restart
          dnsmasq/Apache/Samba (a needed network change stops the play).
          Re-run when idle, or with -e allow_disruptive=true.
      when: pxe_hold_disruptive | bool

    - name: "Corp NIC: corp_admin_cidrs must be valid and include your own SSH session"
      # Restricting SSH on the GE NIC to subnets that do not contain the
      # admin running this play would lock them out on the next login.
      when: corp_admin_cidrs | length > 0
      environment:
        PXE_SSH_CLIENT: "{{ pxe_ssh_client }}"
        CIDRS: "{{ corp_admin_cidrs | join(' ') }}"
        PXE_SUBNET: "{{ pxe_subnet }}"
      args:
        executable: /bin/bash
      shell: |
        peers=$( { echo "${PXE_SSH_CLIENT:-}"; ss -Htn state established '( sport = :22 )' 2>/dev/null | awk '{print $NF}'; } )
        python3 - "$peers" <<'PY'
        import ipaddress, os, re, sys
        try:
            nets = [ipaddress.ip_network(c, strict=False) for c in os.environ["CIDRS"].split()]
        except ValueError as ex:
            sys.exit(f"REFUSED: corp_admin_cidrs has an invalid entry: {ex}")
        local = [ipaddress.ip_network(os.environ["PXE_SUBNET"], strict=False),
                 ipaddress.ip_network("127.0.0.0/8"), ipaddress.ip_network("::1/128")]
        bad = []
        def parse(raw):
            for cand in (raw, re.sub(r":\d+$", "", raw)):
                cand = cand.strip("[]")
                cand = cand[7:] if cand.startswith("::ffff:") else cand
                try:
                    return ipaddress.ip_address(cand)
                except ValueError:
                    pass
            return None
        for raw in sys.argv[1].split():
            ip = parse(raw)
            if ip is None:
                continue
            if any(ip in n for n in local) or any(ip in n for n in nets):
                continue
            bad.append(str(ip))
        if bad:
            sys.exit("REFUSED: SSH client(s) %s are not inside corp_admin_cidrs %s; restricting "
                     "would lock them out. Add their subnet, or run from inside one. Nothing changed."
                     % (", ".join(sorted(set(bad))), os.environ["CIDRS"]))
        print("corp_admin_cidrs cover every current SSH client")
        PY
      changed_when: false

    - name: "SSH: keys required before password logins are turned off on the GE side"
      when: not (corp_ssh_password_auth | bool)
      shell: |
        home=$(getent passwd pxe | cut -d: -f6)
        if [ -n "$home" ] && [ -s "$home/.ssh/authorized_keys" ] &&
           grep -qE '^(ssh-|ecdsa-|sk-)' "$home/.ssh/authorized_keys"; then
          echo "pxe has $(grep -cE '^(ssh-|ecdsa-|sk-)' "$home/.ssh/authorized_keys") key(s)"
        else
          echo "REFUSED: corp_ssh_password_auth is false but pxe has no ~/.ssh/authorized_keys;" >&2
          echo "the GE side would be locked out. Add a key (ssh-copy-id pxe@<corp ip>) first." >&2
          exit 1
        fi
      changed_when: false

    - name: "NICs: render the netplan config for the pre-flight check (in /run, not installed)"
      template:
        src: templates/netplan-pxe.yaml.j2
        dest: /run/pxe-server-netplan.check.yaml
        mode: '0600'
      changed_when: false

    - name: "NICs: pre-flight (refuses swapped MACs / mis-cabled NICs before anything changes)"
      # Refuses when the NIC pxe_nic_mac names holds the default route, a
      # DHCP lease or the route to an SSH client: it would become static
      # with no gateway and cut the box off. Runs from the USB copy, so
      # nothing on the box has been touched yet.
      command: >-
        bash {{ usb_mount }}/pxe-server-helpers/pxe-netplan-apply.sh --preflight
        /run/pxe-server-netplan.check.yaml
        {{ pxe_nic_name }} {{ pxe_nic_mac | lower }}
        {{ corp_nic_name }} {{ corp_nic_mac | lower }}
      environment:
        PXE_SUBNET: "{{ pxe_subnet }}"
        PXE_SSH_CLIENT: "{{ pxe_ssh_client }}"
      register: netplan_preflight
      changed_when: false

    - name: "NICs: pre-flight result"
      debug:
        msg: "{{ netplan_preflight.stdout_lines }}"

    - name: "NICs: a network change is needed but imaging is in progress"
      fail:
        msg: >-
          The netplan config / NIC names must change, which bounces the NICs,
          but imaging is active ({{ pxe_busy_smb }} SMB sessions,
          {{ pxe_busy_leases }} recent leases). Nothing was changed. Re-run
          when idle, or with -e allow_disruptive=true.
      when:
        - pxe_hold_disruptive | bool
        - netplan_preflight.stdout_lines | last | default('') == 'NEEDED'

    - name: "NICs: stop cloud-init from rewriting the network config"
      copy:
        dest: /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg
        mode: '0644'
        content: |
          # Managed by pxe_server_setup.yml: /etc/netplan/50-cloud-init.yaml
          # is the playbook's two-NIC config, not cloud-init's.
          network: {config: disabled}

    - name: "NICs: deploy the netplan apply helper"
      copy:
        src: "{{ usb_mount }}/pxe-server-helpers/pxe-netplan-apply.sh"
        dest: /usr/local/sbin/pxe-netplan-apply.sh
        mode: '0755'

    - name: "NICs: stage the two-NIC netplan config"
      template:
        src: templates/netplan-pxe.yaml.j2
        dest: /etc/pxe-server-netplan.yaml
        mode: '0600'

    - name: "NICs: validate, install and apply netplan (rolls back on failure)"
      command: >-
        /usr/local/sbin/pxe-netplan-apply.sh /etc/pxe-server-netplan.yaml
        {{ pxe_nic_name }} {{ pxe_nic_mac | lower }}
        {{ corp_nic_name }} {{ corp_nic_mac | lower }}
      environment:
        PXE_SUBNET: "{{ pxe_subnet }}"
        PXE_SSH_CLIENT: "{{ pxe_ssh_client }}"
      register: netplan_apply
      changed_when: netplan_apply.stdout_lines | last | default('') == 'CHANGED'

    - name: "NICs: result"
      debug:
        msg: "{{ netplan_apply.stdout_lines }}"

    - name: "Pin IP forwarding off (the imaging LAN is never routed)"
      copy:
        dest: /etc/sysctl.d/99-pxe-net.conf
        mode: '0644'
        content: |
          # Managed by pxe_server_setup.yml. The server never routes between
          # the imaging LAN and the GE corporate network.
          net.ipv4.ip_forward = 0
          net.ipv6.conf.all.forwarding = 0
          net.ipv6.conf.default.forwarding = 0
          # Apache listens on {{ pxe_server_ip }} only (ports 80/4433). Let it
          # bind before networkd has put the address on {{ pxe_nic_name }}, or
          # apache2 fails to start and takes the webapp on 9009 down with it.
          # The netplan config sets ignore-carrier on {{ pxe_nic_name }}, so a
          # missing link no longer keeps the address off; this stays for the
          # boot-order race (apache2 is ordered only after network.target,
          # not after networkd has configured the address).
          net.ipv4.ip_nonlocal_bind = 1
      register: pxe_net_sysctl

    - name: "Apply the network sysctls now (Apache restarts before the handlers)"
      command: sysctl -p /etc/sysctl.d/99-pxe-net.conf
      when: pxe_net_sysctl is changed

    - name: "Expand root partition and filesystem to use full disk"
      args:
        executable: /bin/bash
      shell: |
        # Find the root LV device
        ROOT_DEV=$(findmnt -n -o SOURCE /)
        ROOT_DISK=$(lsblk -n -o PKNAME $(readlink -f "$ROOT_DEV") | tail -1)
        if [ -z "$ROOT_DISK" ]; then
          echo "Could not determine root disk, skipping"
          exit 0
        fi
        # Find the partition number for the LVM PV
        PV_PART=$(pvs --noheadings -o pv_name | tr -d ' ' | head -1)
        if [ -z "$PV_PART" ]; then
          echo "No LVM PV found, skipping"
          exit 0
        fi
        PART_NUM=$(echo "$PV_PART" | grep -o '[0-9]*$')
        echo "Expanding /dev/${ROOT_DISK} partition ${PART_NUM} (${PV_PART})..."
        growpart "/dev/${ROOT_DISK}" "${PART_NUM}" 2>&1 || true
        pvresize "$PV_PART" 2>&1
        lvextend -l +100%FREE "$ROOT_DEV" 2>&1 || true
        resize2fs "$ROOT_DEV" 2>&1
        echo "Disk: $(df -h / | tail -1)"
      register: disk_expand
      changed_when: "'CHANGED' in disk_expand.stdout or 'resized' in disk_expand.stdout"

    - name: "Deploy dnsmasq dhcp-script for per-lease state cleanup"
      copy:
        src: "{{ usb_mount }}/pxe-server-helpers/pxe-dhcp-hook.sh"
        dest: /usr/local/sbin/pxe-dhcp-hook.sh
        mode: '0755'

    - name: "Configure dnsmasq for DHCP and TFTP"
      copy:
        dest: /etc/dnsmasq.conf
        backup: yes
        content: |
          port=0
          listen-address={{ pxe_server_ip }}
          bind-dynamic
          # Interface pinning (serve {{ pxe_nic_name }} only, never
          # {{ corp_nic_name }}) is in /etc/dnsmasq.d/pxe-nic-only.conf.
          dhcp-range={{ pxe_dhcp_start }},{{ pxe_dhcp_end }},{{ pxe_dhcp_lease }}
          # No default gateway (option 3) and no DNS (option 6) handed out:
          # the PXE network is isolated and the PXE server does not forward
          # internet traffic. Previously we set both, which made imaged PCs
          # add a default route via 172.16.9.1 and prefer it over WiFi (lower
          # interface metric). PPKG / Intune enrollment then black-holed
          # internet-bound traffic. The fix used to be migrate-to-wifi.ps1
          # disabling the wired NIC during first-logon, which created an
          # eDNC race (10022 socket errors until the SYSTEM task re-enabled
          # the wired NIC much later). Removing these options entirely lets
          # Windows route internet via WiFi and same-subnet PXE/SMB traffic
          # via wired, no migration script needed.
          #
          # Important: dnsmasq DEFAULTS to sending its own listening address as
          # both router and DNS when these options are unset. Commenting them
          # out is NOT the same as disabling - imaged PCs (and Blancco PXE
          # clients) end up with {{ pxe_server_ip }} as gateway. The empty-value form
          # below explicitly suppresses both options.
          dhcp-option=3
          dhcp-option=6
          enable-tftp
          tftp-root={{ tftp_dir }}
          # Arch-aware NBP for Blancco/WinPE PXE clients:
          #   - legacy BIOS (vendorclass PXEClient:Arch:00000) -> ipxe.pxe, a
          #     BIOS full-feature iPXE build with an HTTP/TCP stack.
          #   - iPXE-running clients (userclass "iPXE") -> chain to the HTTP menu
          #   - every UEFI client -> ipxe-shim.efi, iPXE's Microsoft-signed shim
          #     (dual-signed, UEFI CA 2011 + 2023). Over TFTP it always loads
          #     ipxe.efi from the TFTP root, which is the iPXE snponly build
          #     (see the ipxe_* vars). Rollback: point the last line back at
          #     ipxe-bcm.efi (the old Broadcom-signed 1.21.1 build).
          dhcp-vendorclass=set:bios,PXEClient:Arch:00000
          dhcp-userclass=set:ipxe,iPXE
          dhcp-boot=tag:bios,tag:!ipxe,ipxe.pxe
          dhcp-boot=tag:ipxe,http://{{ pxe_server_ip }}:4433/Altiris/iPXE/GetPxeScript.aspx
          dhcp-boot=tag:!bios,tag:!ipxe,ipxe-shim.efi
          log-dhcp
          # Per-lease state cleanup: flush conntrack + port-445 sockets for
          # the client IP on add/del. Prevents "System error 53" when a PXE
          # client re-images the same machine and hits a stale SMB session.
          # Script runs as root by default (dnsmasq --dhcp-scriptuser default).
          dhcp-script=/usr/local/sbin/pxe-dhcp-hook.sh
          # Also call it when a client comes back to its existing lease (a
          # re-image of the same PC), which dnsmasq otherwise reports only if
          # the hostname or MAC changed. The hook acts on those only for PXE
          # firmware / iPXE requests.
          script-on-renewal

    - name: "Pin dnsmasq to the imaging NIC (never DHCP/PXE on the GE NIC)"
      template:
        src: templates/dnsmasq-pxe-nic-only.conf.j2
        dest: /etc/dnsmasq.d/pxe-nic-only.conf
        mode: '0644'
        backup: yes

    # --- NIC guard: keep dnsmasq off the GE corporate network ---
    # pxe-nic-check classifies each NIC from what it hears (LLDP/CDP/802.1X
    # from managed switches, foreign DHCP offers and their domain). The
    # dnsmasq drop-in runs it as ExecStartPre (--guard: dnsmasq refuses to
    # start if the imaging NIC is on the GE network or next to another DHCP
    # server); the timer re-checks every 5 min (--watch: stops dnsmasq) and
    # writes /run/pxe-nic-status.json for the webapp. Operator notes and
    # the floor tests: docs/pxe-nic-guard.md.
    - name: "NIC guard: deploy pxe-nic-check"
      copy:
        src: "{{ usb_mount }}/pxe-server-helpers/pxe-nic-check"
        dest: /usr/local/sbin/pxe-nic-check
        mode: '0755'

    - name: "NIC guard: create /etc/pxe-server"
      file:
        path: /etc/pxe-server
        state: directory
        mode: '0755'

    - name: "NIC guard: write /etc/pxe-server/nic.conf"
      copy:
        dest: /etc/pxe-server/nic.conf
        mode: '0644'
        content: |
          # Managed by pxe_server_setup.yml (vars pxe_nic_mac, corp_nic_mac,
          # pxe_server_ip, pxe_corp_domain_suffixes). Read by
          # /usr/local/sbin/pxe-nic-check.
          [nic]
          imaging_mac = {{ pxe_imaging_mac | lower }}
          ge_mac = {{ pxe_ge_mac | lower }}
          corp_domain_suffixes = {{ pxe_corp_domain_suffixes }}
          own_ip = {{ pxe_server_ip }}
          allowed_switches = {{ pxe_nic_allowed_switches }}

    - name: "NIC guard: create dnsmasq drop-in directory"
      file:
        path: /etc/systemd/system/dnsmasq.service.d
        state: directory
        mode: '0755'

    - name: "NIC guard: install dnsmasq ExecStartPre drop-in"
      copy:
        src: "{{ usb_mount }}/pxe-server-helpers/dnsmasq.service.d/nic-guard.conf"
        dest: /etc/systemd/system/dnsmasq.service.d/nic-guard.conf
        mode: '0644'

    - name: "NIC guard: install watch service and timer"
      copy:
        src: "{{ usb_mount }}/pxe-server-helpers/{{ item }}"
        dest: "/etc/systemd/system/{{ item }}"
        mode: '0644'
      loop:
        - pxe-nic-check.service
        - pxe-nic-check.timer

    # Carrier hook: networkd-dispatcher runs pxe-nic-carrier on every link
    # state change; it starts pxe-nic-carrier.service, which stops dnsmasq
    # when the imaging link drops and starts it again (through the
    # ExecStartPre guard) when it comes back. pxe-nic-check, its service
    # and pxe-dhcp-hook.sh are (re)copied by the tasks above/below.
    - name: "Carrier hook: networkd-dispatcher installed (offline repo)"
      apt:
        name: networkd-dispatcher
        state: present

    - name: "Carrier hook: deploy pxe-nic-carrier"
      copy:
        src: "{{ usb_mount }}/pxe-server-helpers/pxe-nic-carrier"
        dest: /usr/local/sbin/pxe-nic-carrier
        owner: root
        group: root
        mode: '0755'

    - name: "Carrier hook: install pxe-nic-carrier.service (started by the hook, not enabled)"
      copy:
        src: "{{ usb_mount }}/pxe-server-helpers/pxe-nic-carrier.service"
        dest: /etc/systemd/system/pxe-nic-carrier.service
        mode: '0644'
      register: carrier_unit

    - name: "Carrier hook: systemd daemon-reload"
      systemd:
        daemon_reload: yes
      when: carrier_unit is changed

    - name: "Carrier hook: networkd-dispatcher state directories"
      file:
        path: "/etc/networkd-dispatcher/{{ item }}"
        state: directory
        owner: root
        group: root
        mode: '0755'
      loop: "{{ carrier_hook_states }}"
      notify: restart networkd-dispatcher

    - name: "Carrier hook: link the hook into each state"
      file:
        src: /usr/local/sbin/pxe-nic-carrier
        dest: "/etc/networkd-dispatcher/{{ item }}/50-pxe-nic-carrier"
        state: link
        owner: root
        group: root
      loop: "{{ carrier_hook_states }}"
      notify: restart networkd-dispatcher

    - name: "Carrier hook: networkd-dispatcher enabled and running"
      systemd:
        name: networkd-dispatcher
        enabled: yes
        state: started

    - name: "NIC guard: enable watch timer"
      systemd:
        name: pxe-nic-check.timer
        state: started
        enabled: yes
        daemon_reload: yes

    - name: "Create TFTP directory"
      file:
        path: "{{ tftp_dir }}"
        state: directory
        mode: '0755'
        owner: nobody
        group: nogroup

    - name: "Create Win11 directory structure"
      file:
        path: "{{ web_root }}/win11/{{ item }}"
        state: directory
        mode: '0755'
      loop:
        - "EFI/Boot"
        - "EFI/Microsoft/Boot"
        - "Boot"
        - "sources"

    - name: "Create Altiris iPXE directory"
      file:
        path: "{{ web_root }}/Altiris/iPXE"
        state: directory
        mode: '0755'

    - name: "Create boot tool directories"
      file:
        path: "{{ web_root }}/{{ item }}"
        state: directory
        mode: '0755'
      loop:
        - clonezilla
        - clonezilla-i686
        - blancco

    - name: "Remove the retired Memtest86+ web dir (memory tests: Dell F12 Diagnostics)"
      file:
        path: "{{ web_root }}/memtest"
        state: absent

    - name: "Menu: the Blancco file names in the menu must match blancco_kver"
      # GetPxeScript.aspx names the UEFI Blancco files by suffix
      # (vmlinuz-ubuntu-70, kexec-initrd-70.img); the play builds them from
      # blancco_kver. A mismatch boots a file that is never built.
      shell: |
        M="{{ usb_mount }}/ipxe/GetPxeScript.aspx"
        found=$(grep -oE '(vmlinuz-ubuntu|kexec-initrd)-[0-9]+' "$M" | sed 's/.*-//' | sort -u | tr '\n' ' ')
        echo "menu suffixes: ${found:-none}"
        for x in $found; do
          if [ "$x" != "{{ blancco_ksuffix }}" ]; then
            echo "REFUSED: $M references Blancco files with suffix $x but blancco_kver" >&2
            echo "{{ blancco_kver }} builds suffix {{ blancco_ksuffix }}. Change them together" >&2
            echo "(playbook var blancco_kver, scripts/download-packages.sh, the menu)." >&2
            exit 1
          fi
        done
      register: menu_ksuffix
      changed_when: false

    - name: "Menu: does the live menu carry a staged Blancco test entry?"
      # The Blancco Releases page (webapp/services/blancco_update.py) adds a
      # test entry between these markers; overwriting the menu would drop it
      # while the page still shows it as added.
      shell: |
        F="{{ web_root }}/Altiris/iPXE/GetPxeScript.aspx"
        [ -f "$F" ] || exit 0
        if grep -qF '# BEGIN blancco-staged test entry' "$F" || grep -qE '^item[[:space:]]+blancco_staged[[:space:]]' "$F"; then
          echo STAGED-TEST
        fi
      register: menu_test_entry
      changed_when: false

    - name: "Menu: NOT replacing the live menu (Blancco test entry present)"
      debug:
        msg: >-
          WARNING: {{ web_root }}/Altiris/iPXE/GetPxeScript.aspx carries the
          staged Blancco test entry (Updates > Blancco). The menu was NOT
          updated from {{ usb_mount }}/ipxe/GetPxeScript.aspx. Remove the
          test entry on that page (or promote the release), then re-run.
      when: "'STAGED-TEST' in menu_test_entry.stdout"

    - name: "Install GetPxeScript.aspx (iPXE boot menu)"
      # The live menu, tracked as a file (playbook/ipxe/GetPxeScript.aspx).
      # WinPE skips the Secure Boot warning when iPXE reads Secure Boot as on
      # (iPXE 2.0 ${efi/SecureBoot}); Blancco starts through the Ubuntu shim
      # (iPXE shim command) so it runs with Secure Boot on. The Blancco
      # Releases page edits this file (test entry), so keep exactly one
      # "item blancco" line and the :blancco_efi kernel+initrd block.
      copy:
        src: "{{ usb_mount }}/ipxe/GetPxeScript.aspx"
        dest: "{{ web_root }}/Altiris/iPXE/GetPxeScript.aspx"
        mode: '0644'
        backup: yes
      when: "'STAGED-TEST' not in menu_test_entry.stdout"

    # Boot files (80) and the iPXE menu (4433) are served on the imaging IP
    # only, never on the GE NIC. 9009 (webapp) stays on all addresses: admins
    # reach it from the GE side (see pxe-server.conf below).
    - name: "Apache: serve port 80 on the imaging IP only"
      lineinfile:
        path: /etc/apache2/ports.conf
        regexp: '^\s*Listen\s+(\S+:)?80\s*$'
        line: "Listen {{ pxe_server_ip }}:80"
        backup: yes
        state: present

    - name: "Apache: serve port 4433 (iPXE menu) on the imaging IP only"
      lineinfile:
        path: /etc/apache2/ports.conf
        regexp: '^\s*Listen\s+(\S+:)?4433\s*$'
        line: "Listen {{ pxe_server_ip }}:4433"
        backup: yes
        state: present

    - name: "Create VirtualHost for Altiris iPXE on 4433"
      copy:
        dest: /etc/apache2/sites-available/altiris-ipxe.conf
        backup: yes
        content: |
          <VirtualHost *:4433>
              DocumentRoot {{ web_root }}
              <Directory "{{ web_root }}/Altiris/iPXE">
                  Options Indexes FollowSymLinks
                  AllowOverride None
                  Require all granted
                  AddType text/plain .aspx
              </Directory>
          </VirtualHost>

    - name: "Enable Altiris iPXE site"
      command: a2ensite altiris-ipxe.conf
      args:
        creates: /etc/apache2/sites-enabled/altiris-ipxe.conf

    - name: "Reload Apache to apply changes"
      systemd:
        name: apache2
        state: reloaded

    - name: "Create Samba share root"
      file:
        path: "{{ samba_share }}"
        state: directory
        mode: '0777'

    - name: "Create Clonezilla backup share directory"
      file:
        path: /srv/samba/clonezilla
        state: directory
        mode: '0777'

    - name: "Create Blancco reports share directory"
      file:
        path: /srv/samba/blancco-reports
        state: directory
        mode: '0777'

    - name: "Create enrollment share with internal taxonomy"
      file:
        path: "/srv/samba/enrollment/{{ item }}"
        state: directory
        mode: '0777'
      loop:
        - ""
        - ppkgs
        - scripts
        - config
        - shopfloor-setup
        - pre-install
        - pre-install/bios
        - pre-install/installers
        - installers-post
        - installers-post/cmm
        - blancco
        - logs

    - name: "Deploy enrollment share README"
      copy:
        dest: /srv/samba/enrollment/README.md
        mode: '0644'
        content: |
          # Enrollment Share Layout
          Single SMB share mounted by WinPE as Y: during imaging. Subdir layout:
          - ppkgs/             GCCH bulk-enrollment PPKGs
          - scripts/           run-enrollment.ps1, wait-for-internet.ps1, migrate-to-wifi.ps1
          - config/            site-config.json, FlatUnattendW10*.xml, per-site overrides
          - shopfloor-setup/   Per-PC-type post-imaging scripts
          - pre-install/       WinPE-phase content (bios/, installers/, preinstall.json)
          - installers-post/   Post-OOBE app installers (cmm/PCDMIS, etc.)
          - blancco/           Blancco custom images / configs
          - logs/              Client log uploads

    - name: "Deploy PPKG enrollment packages to ppkgs/"
      shell: |
        set +e
        # Copy any whole PPKGs (small enough to fit on FAT32)
        cp -f {{ usb_root }}/enrollment/*.ppkg /srv/samba/enrollment/ppkgs/ 2>/dev/null
        # Reassemble any split files (foo.ppkg.part.00, .01, ... -> foo.ppkg)
        for first in {{ usb_root }}/enrollment/*.part.00; do
          [ -e "$first" ] || continue
          base="${first%.part.00}"
          name="$(basename "$base")"
          echo "Reassembling $name from chunks..."
          cat "${base}.part."* > "/srv/samba/enrollment/ppkgs/$name"
        done
        ls -lh /srv/samba/enrollment/ppkgs/*.ppkg 2>/dev/null
      ignore_errors: yes

    - name: "Deploy enrollment scripts to scripts/"
      copy:
        src: "{{ item.src }}"
        dest: "/srv/samba/enrollment/scripts/{{ item.dest }}"
        mode: '0644'
      loop:
        - { src: "{{ usb_mount }}/shopfloor-setup/run-enrollment.ps1", dest: "run-enrollment.ps1" }
        - { src: "{{ usb_mount }}/wait-for-internet.ps1",              dest: "wait-for-internet.ps1" }
        - { src: "{{ usb_mount }}/migrate-to-wifi.ps1",                dest: "migrate-to-wifi.ps1" }
        - { src: "{{ usb_mount }}/winpe-status-push.ps1",              dest: "winpe-status-push.ps1" }
      ignore_errors: yes

    - name: "Deploy site-config.json to config/"
      copy:
        src: "{{ usb_mount }}/shopfloor-setup/site-config.json"
        dest: /srv/samba/enrollment/config/site-config.json
        mode: '0644'
      ignore_errors: yes

    - name: "Deploy Dell driver packs to shared Out-of-box Drivers"
      args:
        executable: /bin/bash
      shell: |
        set +e
        SRC="{{ usb_root }}/drivers"
        DEST="/srv/samba/winpeapps/_shared/Out-of-box Drivers/Dell_11"
        if [ ! -d "$SRC" ]; then
          echo "No drivers/ on USB - skipping"
          exit 0
        fi
        mkdir -p "$DEST"
        # Copy everything except split chunks
        rsync -a --exclude='*.part.*' "$SRC/" "$DEST/"
        # Reassemble any split driver files
        while IFS= read -r first; do
          base="${first%.part.00}"
          rel="${base#$SRC/}"
          out="$DEST/$rel"
          mkdir -p "$(dirname "$out")"
          echo "Reassembling $rel from chunks..."
          cat "${base}.part."* > "$out"
        done < <(find "$SRC" -name '*.part.00')
        echo "Deployed Dell drivers from USB"
      ignore_errors: yes

    - name: "Deploy shopfloor setup scripts to enrollment share"
      copy:
        src: "{{ usb_mount }}/shopfloor-setup/"
        dest: /srv/samba/enrollment/shopfloor-setup/
        mode: '0755'
        directory_mode: '0755'
      ignore_errors: yes

    - name: "Deploy preinstall.json to pre-install/"
      copy:
        src: "{{ usb_mount }}/preinstall/preinstall.json"
        dest: /srv/samba/enrollment/pre-install/preinstall.json
        mode: '0644'
      ignore_errors: yes

    # Oracle Client 11.2 is the first app the preinstall runner executes, so it
    # has to be present on-disk before the first client images. The 686 MB
    # Oracle_OracleDatabase_11r2_V03.zip doesn't belong in git; it rides on the
    # USB under oracle/ alongside the BIOS exes. Install-Oracle11r2.cmd is
    # tracked at playbook/preinstall/oracle/ and arrives via usb_mount.
    - name: "Create pre-install/installers/oracle/ staging dir"
      file:
        path: /srv/samba/enrollment/pre-install/installers/oracle
        state: directory
        mode: '0755'
      ignore_errors: yes

    - name: "Deploy Install-Oracle11r2.cmd to pre-install/installers/oracle/"
      copy:
        src: "{{ usb_mount }}/preinstall/oracle/Install-Oracle11r2.cmd"
        dest: /srv/samba/enrollment/pre-install/installers/oracle/Install-Oracle11r2.cmd
        mode: '0755'
      ignore_errors: yes

    # Per-file overrides for the .ora config dropped by the wrapper post-install.
    # The zip's client/ora/ contains dated defaults; shipping an updated
    # tnsnames.ora alongside the wrapper lets us refresh the DB catalog without
    # repackaging the 686 MB zip. sqlnet.ora and ldap.ora can be added here the
    # same way if they ever need to diverge from the zip's bundled copies.
    - name: "Deploy updated tnsnames.ora override to pre-install/installers/oracle/"
      copy:
        src: "{{ usb_mount }}/preinstall/oracle/tnsnames.ora"
        dest: /srv/samba/enrollment/pre-install/installers/oracle/tnsnames.ora
        mode: '0644'
      ignore_errors: yes

    - name: "Deploy Oracle 11.2 zip (686 MB) from USB to pre-install/installers/oracle/"
      shell: >
        if [ -f "{{ usb_root }}/oracle/Oracle_OracleDatabase_11r2_V03.zip" ]; then
          cp -f "{{ usb_root }}/oracle/Oracle_OracleDatabase_11r2_V03.zip" \
                /srv/samba/enrollment/pre-install/installers/oracle/
          echo "Deployed Oracle 11.2 zip ($(stat -c %s /srv/samba/enrollment/pre-install/installers/oracle/Oracle_OracleDatabase_11r2_V03.zip) bytes)"
        else
          echo "WARNING: {{ usb_root }}/oracle/Oracle_OracleDatabase_11r2_V03.zip not on USB - preinstall runner will fail on Oracle step until this file is staged at /srv/samba/enrollment/pre-install/installers/oracle/"
        fi
      ignore_errors: yes

    - name: "Ensure winpeapps/_shared/BIOS directory exists"
      file:
        path: /srv/samba/winpeapps/_shared/BIOS
        state: directory
        mode: '0755'

    - name: "Ensure driver store is owned by pxe (download-drivers.py pushes here over ssh as the pxe user; root/webapp still write it fine)"
      file:
        path: "/srv/samba/winpeapps/_shared/Out-of-box Drivers"
        state: directory
        owner: pxe
        group: pxe
        mode: '0775'

    # Imaging stage reporter: the bays run it from the shared Applications
    # tree and post their stage to the webapp's /imaging dashboard.
    - name: "Imaging status: create _shared/Applications/extra/pxe-status"
      file:
        path: "{{ samba_share }}/_shared/Applications/extra/pxe-status"
        state: directory
        mode: '0755'

    - name: "Imaging status: deploy Send-ImagingStage.ps1"
      copy:
        src: "{{ usb_mount }}/imaging-status/Send-ImagingStage.ps1"
        dest: "{{ samba_share }}/_shared/Applications/extra/pxe-status/Send-ImagingStage.ps1"
        mode: '0644'

    - name: "Deploy BIOS check script + manifest to winpeapps/_shared/BIOS/"
      # Path matches what startnet.cmd reads at WinPE boot:
      #   net use B: \\172.16.9.1\winpeapps\_shared
      #   if exist B:\BIOS\check-bios.cmd ...
      # Earlier deploy targeted enrollment/pre-install/bios/ (different share)
      # which startnet.cmd never read, so BIOS_STATUS perma-stuck on
      # "No BIOS check (share unavailable)". Corrected 2026-04-28.
      copy:
        src: "{{ usb_mount }}/shopfloor-setup/BIOS/{{ item }}"
        dest: "/srv/samba/winpeapps/_shared/BIOS/{{ item }}"
        mode: '0644'
      loop:
        - check-bios.cmd
        - models.txt
        - hardware-report.ps1
      ignore_errors: yes

    - name: "Deploy Dell Flash64W.exe to winpeapps/_shared/BIOS/"
      copy:
        src: "{{ usb_root }}/bios/Flash64W.exe"
        dest: /srv/samba/winpeapps/_shared/BIOS/Flash64W.exe
        mode: '0644'
      ignore_errors: yes

    - name: "Deploy BIOS update binaries from USB to winpeapps/_shared/BIOS/"
      shell: >
        if [ -d "{{ usb_root }}/bios" ]; then
          cp -f {{ usb_root }}/bios/*.exe /srv/samba/winpeapps/_shared/BIOS/ 2>/dev/null || true
          count=$(find /srv/samba/winpeapps/_shared/BIOS -name '*.exe' | wc -l)
          echo "Deployed $count BIOS binaries"
        else
          echo "No bios/ on USB - skipping"
        fi
      ignore_errors: yes

    - name: "Create image upload staging directory"
      file:
        path: /home/pxe/image-upload
        state: directory
        mode: '0777'
        owner: pxe
        group: pxe

    - name: "Enable Samba symlink following (shared image dirs)"
      blockinfile:
        path: /etc/samba/smb.conf
        backup: yes
        marker: "# {mark} MANAGED - GLOBAL SYMLINKS"
        insertafter: '\[global\]'
        block: |
          follow symlinks = yes
          wide links = yes
          unix extensions = no
          # Modern Samba silently disables wide links WITHOUT this. The shared
          # image dirs are served via symlinks into _shared, so it is required
          # or WinPE clients cannot follow them.
          allow insecure wide links = yes

    # Runs after the symlinks block so it lands first under [global], as on
    # the live server.
    - name: "Bind Samba to the imaging NIC only"
      blockinfile:
        path: /etc/samba/smb.conf
        backup: yes
        marker: "# {mark} MANAGED - PXE NIC BIND"
        insertafter: '\[global\]'
        block: |
          # Bind Samba to the PXE LAN only. The second NIC reaches the GE corporate
          # network, and these shares (blancco-reports, enrollment, image-upload,
          # clonezilla) use shared, well-known imaging passwords and are writable by
          # design. Without this they are offered to the corporate network the moment
          # the cable is plugged in.
             interfaces = 127.0.0.0/8 {{ pxe_nic_name }}
             bind interfaces only = yes

    - name: "Samba SMB session handling for WinPE re-image robustness"
      blockinfile:
        path: /etc/samba/smb.conf
        backup: yes
        marker: "# {mark} MANAGED - PXE REIMAGE FIX"
        insertafter: "# END MANAGED - GLOBAL SYMLINKS"
        block: |
          # Reduce the chance a WinPE client rebooting mid-imaging leaves a
          # stale session on the server that blocks its next connection
          # attempt with "System error 53 network path not found". Combined
          # with /etc/sysctl.d/99-pxe-conntrack.conf (shorter nf_conntrack
          # TCP timeouts) this keeps the conntrack + smbd state in sync with
          # the short-lived flows that PXE imaging produces.
             socket options = TCP_NODELAY SO_KEEPALIVE IPTOS_LOWDELAY
             keepalive = 30
             # deadtime=0 (disabled): WinPE maps the enrollment share early then
             # idles for minutes during the WIM apply. A non-zero deadtime drops
             # that idle session, so the post-apply staging copies failed (bay
             # left with only site-config.json). 0 = never auto-disconnect idle.
             deadtime = 0

    - name: "Configure Samba shares"
      blockinfile:
        path: /etc/samba/smb.conf
        backup: yes
        block: |
          [winpeapps]
          path = {{ samba_share }}
          browseable = yes
          read only = no
          guest ok = no
          valid users = pxe-upload
          force user = root

          [clonezilla]
          path = /srv/samba/clonezilla
          browseable = yes
          read only = no
          guest ok = no
          valid users = pxe-upload
          force user = root
          comment = Clonezilla backup images

          [blancco-reports]
          path = /srv/samba/blancco-reports
          browseable = yes
          read only = no
          guest ok = no
          valid users = pxe-upload blancco
          force user = root
          comment = Blancco Drive Eraser reports

          [enrollment]
          path = /srv/samba/enrollment
          browseable = yes
          read only = no
          guest ok = no
          valid users = pxe-upload
          force user = root
          comment = GCCH bulk enrollment packages

          [image-upload]
          path = /home/pxe/image-upload
          browseable = yes
          read only = no
          guest ok = no
          valid users = pxe-upload
          force user = pxe
          force group = pxe
          comment = PXE image upload staging area
          oplocks = no
          level2 oplocks = no
          strict sync = yes

          [winpeapps_bios]
          path = /srv/samba/winpeapps/_shared/BIOS
          browseable = no
          read only = yes
          guest ok = no
          valid users = pxe-upload
          comment = Dell BIOS update bundle (read-only, served to WinPE)

    - name: "Create Samba users (pxe-upload and blancco)"
      shell: |
        id pxe-upload >/dev/null 2>&1 || useradd -M -s /usr/sbin/nologin pxe-upload
        echo -e 'pxe\npxe' | smbpasswd -a pxe-upload -s
        id blancco >/dev/null 2>&1 || useradd -M -s /usr/sbin/nologin blancco
        echo -e 'blancco\nblancco' | smbpasswd -a blancco -s
      args:
        executable: /bin/bash
      changed_when: false

    - name: "Deploy nf_conntrack TCP timeout sysctl for PXE workload"
      copy:
        src: "{{ usb_mount }}/pxe-server-helpers/99-pxe-conntrack.conf"
        dest: /etc/sysctl.d/99-pxe-conntrack.conf
        mode: '0644'
      notify: reload sysctl

    - name: "Load nf_conntrack at boot so the conntrack sysctl applies"
      # systemd-sysctl runs before ufw loads nf_conntrack, so without this the
      # net.netfilter.* keys do not exist yet at boot and the 1 h timeout is
      # silently skipped (the kernel default of 5 days stays in force).
      copy:
        dest: /etc/modules-load.d/pxe-conntrack.conf
        content: "nf_conntrack\n"
        mode: '0644'

    - name: "Deploy SMB diagnostic + soft-reset helper scripts"
      copy:
        src: "{{ usb_mount }}/pxe-server-helpers/{{ item }}"
        dest: "/usr/local/sbin/{{ item }}"
        mode: '0755'
      loop:
        - smb-diag.sh
        - smb-soft-reset.sh

    - name: "Create image-type top-level directories"
      file:
        path: "{{ samba_share }}/{{ item }}"
        state: directory
        mode: '0777'
      loop: "{{ image_types }}"

    - name: "Create Deploy subdirectories for each image type"
      file:
        path: "{{ samba_share }}/{{ item.0 }}/Deploy/{{ item.1 }}"
        state: directory
        mode: '0777'
      with_nested:
        - "{{ image_types }}"
        - "{{ deploy_subdirs }}"

    - name: "Create Media.tag for FlatSetupLoader.exe drive detection"
      copy:
        content: ""
        dest: "{{ samba_share }}/{{ item }}/Deploy/Control/Media.tag"
        mode: '0644'
        force: no
      loop: "{{ image_types }}"

    - name: "Unattend: lint the answer files before they replace the live ones"
      # A bad answer file stops every bay imaged with it at "Windows could
      # not parse or process unattend answer file". The copies below use
      # force: yes, so this gate is the only check. scripts/lint-unattend.py
      # rides on the USB as scripts/ next to playbook/ (build-usb.sh), and
      # is in the repo at the same relative path.
      args:
        executable: /bin/bash
      shell: |
        for L in "{{ usb_mount }}/../scripts/lint-unattend.py" "{{ playbook_dir }}/../scripts/lint-unattend.py"; do
          if [ -f "$L" ]; then
            exec python3 "$L" --local \
              "{{ usb_mount }}/FlatUnattendW10-shopfloor.xml" \
              "{{ usb_mount }}/FlatUnattendW10.xml" \
              "{{ usb_mount }}/FlatUnattendW10-engineer.xml"
          fi
        done
        echo "ERROR: scripts/lint-unattend.py not found next to {{ usb_mount }} or {{ playbook_dir }}" >&2
        exit 1
      changed_when: false

    - name: "Deploy shopfloor unattend.xml template"
      copy:
        src: "{{ usb_mount }}/FlatUnattendW10-shopfloor.xml"
        dest: "{{ samba_share }}/{{ item }}/Deploy/FlatUnattendW10.xml"
        mode: '0644'
        # force: yes - repo is source of truth. force: no let the live shopfloor
        # unattend go stale (missing the Fetch + Verify-And-Heal staging steps),
        # and a playbook run never repaired it. Keep it in sync like the standard
        # /engineer unattend below.
        force: yes
      loop: "{{ shopfloor_types }}"
      ignore_errors: yes

    # gea-standard and gea-engineer each get their OWN unattend. They are not
    # interchangeable: the engineer file carries FirstLogonCommands Order 11,
    # which installs the Engineering Layer, and nothing else differs. Deploying
    # one shared template to both - which this task used to do - silently
    # stripped that entry from gea-engineer on every playbook run.
    #
    # force: yes because drift between these files and the share is what caused
    # the Win10/Win11 search-cleanup regression (d49f516). That only works if
    # the repo copies are genuinely current: on 2026-08-19 this template was
    # found to be missing specialize Orders 39-48 - including Order 39, which
    # registers the bulk-enrollment orchestrator - so a playbook run would have
    # removed enrollment from every standard and engineer bay. Both files are
    # now reconciled against the live share. Re-check before trusting force: yes.
    - name: "Deploy standard/engineer unattend.xml (per-type template)"
      copy:
        src: "{{ usb_mount }}/{{ item.src }}"
        dest: "{{ samba_share }}/{{ item.dest }}/Deploy/FlatUnattendW10.xml"
        mode: '0644'
        force: yes
      loop:
        - { src: 'FlatUnattendW10.xml',          dest: 'gea-standard' }
        - { src: 'FlatUnattendW10-engineer.xml', dest: 'gea-engineer' }
      ignore_errors: yes

    - name: "Daily cron to create/refresh Media.tag for all images"
      copy:
        content: |
          # Create Media.tag in any image with Deploy/Control/ and refresh existing ones
          @reboot root for d in {{ samba_share }}/*/Deploy/Control; do [ -d "$d" ] && touch "$d/Media.tag"; done
          0 0 * * * root for d in {{ samba_share }}/*/Deploy/Control; do [ -d "$d" ] && touch "$d/Media.tag"; done
        dest: /etc/cron.d/media-tag-refresh
        mode: '0644'

    - name: "Copy WinPE & boot files from USB (skipped if not present)"
      copy:
        src: "{{ usb_root }}/{{ item.src }}"
        dest: "{{ web_root }}/win11/{{ item.dest }}"
        mode: '0644'
      loop:
        - { src: "wimboot",     dest: "wimboot" }
        - { src: "boot.stl",    dest: "EFI/Microsoft/Boot/boot.stl" }
        - { src: "BCD",         dest: "EFI/Microsoft/Boot/BCD" }
        - { src: "bootx64.efi", dest: "EFI/Boot/bootx64.efi" }
        - { src: "boot.sdi",    dest: "Boot/boot.sdi" }
        - { src: "boot.wim",    dest: "sources/boot.wim" }
      ignore_errors: yes

    - name: "Inject startnet.cmd into boot.wim (virtual BOOT/MEDIA volumes)"
      shell: |
        WIM="{{ web_root }}/win11/sources/boot.wim"
        STARTNET="{{ usb_mount }}/startnet.cmd"
        if [ -f "$WIM" ] && [ -f "$STARTNET" ]; then
          echo "add $STARTNET /Windows/System32/startnet.cmd" | wimupdate "$WIM" 1
          echo "Updated startnet.cmd in boot.wim"
        else
          echo "Skipped: boot.wim or startnet.cmd not found"
        fi
      args:
        executable: /bin/bash
      ignore_errors: yes

    - name: "Install the Secure Boot iPXE chain into the TFTP root (pinned, verified)"
      # Not ignore_errors: without these files no client can boot. Files come
      # from boot-files/ via scripts/fetch-ipxe.sh; each is checked against
      # its pin before anything is replaced, and each is put in place by
      # rename so a client that is booting never reads half a file.
      shell: |
        set -euo pipefail
        U="{{ usb_root }}"; T="{{ tftp_dir }}"
        check() { echo "$2  $1" | sha256sum -c --status || { echo "sha256 mismatch or missing: $1" >&2; exit 1; }; }
        check "$U/ipxeboot.tar.gz" "{{ ipxe_tarball_sha256 }}"
        check "$U/ipxe-shimx64.efi" "{{ ipxe_shim_sha256 }}"
        W=$(mktemp -d); trap 'rm -rf "$W"' EXIT
        tar -xzf "$U/ipxeboot.tar.gz" -C "$W" ipxeboot/x86_64-sb/snponly.efi ipxeboot/x86_64/ipxe.pxe
        check "$W/ipxeboot/x86_64-sb/snponly.efi" "{{ ipxe_snponly_sha256 }}"
        check "$W/ipxeboot/x86_64/ipxe.pxe" "{{ ipxe_bios_sha256 }}"
        put() { install -m 0644 -o root -g root "$1" "$T/.$2.new" && mv -f "$T/.$2.new" "$T/$2"; }
        # Never downgrade what the webapp's Updates page installed from a
        # newer release than ipxe_release_tag: a file whose live sha256 still
        # matches its installed.json record with a newer tag is kept. The
        # shim and ipxe.efi go together (the shim must trust ipxe.efi's CA).
        AHEAD=$(python3 - /var/lib/pxe-webapp/updates/ipxe/installed.json "$T" "{{ ipxe_release_tag }}" <<'PY'
        import hashlib, json, os, re, sys
        log, tftp, pin = sys.argv[1:4]
        def ver(t):
            m = re.search(r"(\d+)\.(\d+)(?:\.(\d+))?", t or "")
            return tuple(int(x or 0) for x in m.groups()) if m else None
        try:
            data = json.load(open(log))
        except (OSError, ValueError):
            data = {}
        data = data if isinstance(data, dict) else {}
        for name in ("ipxe-shim.efi", "ipxe.efi", "ipxe.pxe"):
            rec, path = data.get(name), os.path.join(tftp, name)
            if not isinstance(rec, dict) or not os.path.isfile(path):
                continue
            if hashlib.sha256(open(path, "rb").read()).hexdigest() != rec.get("sha256"):
                continue
            a, b = ver(rec.get("tag")), ver(pin)
            if a and b and a > b:
                print(f"{name}={rec.get('tag')}")
        PY
        )
        done=""
        if grep -qE '^(ipxe-shim\.efi|ipxe\.efi)=' <<<"$AHEAD"; then
          echo "KEPT ipxe-shim.efi + ipxe.efi: the Updates page installed a newer release ($(grep -E '^ipxe(-shim)?\.efi=' <<<"$AHEAD" | tr '\n' ' ')) than the playbook's {{ ipxe_release_tag }}"
        else
          put "$U/ipxe-shimx64.efi" ipxe-shim.efi
          put "$W/ipxeboot/x86_64-sb/snponly.efi" ipxe.efi
          done="ipxe-shim.efi, ipxe.efi (snponly)"
        fi
        if grep -qE '^ipxe\.pxe=' <<<"$AHEAD"; then
          echo "KEPT ipxe.pxe: the Updates page installed $(grep -E '^ipxe\.pxe=' <<<"$AHEAD"), newer than {{ ipxe_release_tag }}"
        else
          put "$W/ipxeboot/x86_64/ipxe.pxe" ipxe.pxe
          done="${done:+$done, }ipxe.pxe"
        fi
        # Rollback boot file: the old Broadcom-signed build (boot-files/ipxe.efi).
        if [ -f "$U/ipxe.efi" ]; then put "$U/ipxe.efi" ipxe-bcm.efi; done="${done:+$done, }ipxe-bcm.efi"; fi
        echo "installed: ${done:-nothing}"
      args:
        executable: /bin/bash
      register: ipxe_chain
      changed_when: true

    - name: "Show the installed iPXE chain"
      debug:
        msg: "{{ ipxe_chain.stdout }}"

    - name: "Copy boot tool files from USB (Clonezilla 64/32-bit, Blancco)"
      # Clonezilla includes shimx64.efi (Debian's Microsoft-signed shim), which
      # the menu uses to boot its Debian-signed kernel with Secure Boot on.
      shell: >
        cp -r "{{ usb_root }}/boot-tools/{{ item }}/"* "{{ web_root }}/{{ item }}/" 2>/dev/null || true
      loop:
        - clonezilla
        - clonezilla-i686
        - blancco

    # --- Blancco PXE boot via Ubuntu kernel + switch_root ---
    # Blancco's own kernel freezes on Dell Precision towers. Workaround:
    # Boot Ubuntu kernel, download Blancco rootfs, overlay mount, switch_root.
    # Kernel, modules and initramfs all come from blancco_kver (the HWE
    # kernel), not the server's running kernel: the server may run 6.8 while
    # Blancco boots 7.0. Output names carry the version so a changed
    # blancco_kver rebuilds instead of being skipped by the creates: guards.

    - name: "Blancco: is the Blancco kernel ({{ blancco_kver }}) installed?"
      stat:
        path: "{{ item }}"
      loop:
        - "/boot/vmlinuz-{{ blancco_kver }}"
        - "/lib/modules/{{ blancco_kver }}/modules.dep"
      register: blancco_kernel_files

    - name: "Blancco: kernel check result"
      set_fact:
        blancco_kernel_ok: "{{ blancco_kernel_files.results | map(attribute='stat.exists') | min }}"

    - name: "Blancco: are the UEFI Blancco files already served?"
      stat:
        path: "{{ web_root }}/blancco/{{ item }}"
      loop:
        - "vmlinuz-ubuntu-{{ blancco_ksuffix }}"
        - "kexec-initrd-{{ blancco_ksuffix }}.img"
      register: blancco_served
      when: not blancco_kernel_ok

    # The menu boots these files (checked above: same suffix). Without the
    # kernel they cannot be built; with no earlier build in place, every
    # UEFI Blancco boot would fail, so that is fatal, not a warning.
    - name: "Blancco: the kernel is missing and the menu's files were never built"
      fail:
        msg: >-
          /boot/vmlinuz-{{ blancco_kver }} or /lib/modules/{{ blancco_kver }}
          is missing, and {{ web_root }}/blancco has no
          vmlinuz-ubuntu-{{ blancco_ksuffix }} /
          kexec-initrd-{{ blancco_ksuffix }}.img from an earlier run, but the
          iPXE menu boots them. Install linux-image-{{ blancco_kver }} +
          linux-modules-{{ blancco_kver }} (offline packages,
          scripts/download-packages.sh) or set blancco_kver to an installed
          version (ls /lib/modules) AND change the menu to match, then re-run.
      when:
        - not blancco_kernel_ok
        - not (blancco_served.results | map(attribute='stat.exists') | min)

    - name: "Blancco: warn when the Blancco kernel is missing (earlier build kept)"
      debug:
        msg: >-
          WARNING: /boot/vmlinuz-{{ blancco_kver }} or
          /lib/modules/{{ blancco_kver }} is missing, so the Blancco UEFI
          files are NOT rebuilt; the copies from an earlier run stay in
          place (they may not match blancco_kver). Install
          linux-image-{{ blancco_kver }} + linux-modules-{{ blancco_kver }}
          and re-run.
      when: not blancco_kernel_ok

    - name: "Build Blancco PXE initramfs (kexec-initrd-{{ blancco_ksuffix }}.img)"
      # The narrow hand-picked NIC driver list used before 2026-04-22 produced
      # a 2 MB initramfs that hung on "waiting for network interface" for any
      # hardware outside e1000e/igb/tg3/bnx2/bnxt_en/b44. This rewrite sweeps
      # the full drivers/net/ tree (ethernet + phy + mdio + usb + fddi + wan)
      # plus overlay / squashfs / loop / ptp / libphy / mii deps, runs depmod
      # so blancco-init.sh can use modprobe with proper dependency resolution,
      # and produces a ~20 MB initramfs. Size isn't a concern - HTTP loads it
      # in under two seconds at gigabit, versus the many minutes of hangtime
      # the narrow build cost us when a NIC was unsupported.
      args:
        executable: /bin/bash
        # Stamp named after the full version: 7.0.0-34 -> 7.0.0-40 keeps the
        # file name (suffix 70) but must rebuild.
        creates: "{{ web_root }}/blancco/.kexec-initrd-{{ blancco_ksuffix }}.{{ blancco_kver }}.built"
      when: blancco_kernel_ok
      shell: |
        set -eo pipefail
        WORK=$(mktemp -d)
        trap 'rm -rf "$WORK" "$OUT.tmp"' EXIT
        KVER="{{ blancco_kver }}"
        OUT="{{ web_root }}/blancco/kexec-initrd-{{ blancco_ksuffix }}.img"
        mkdir -p "$WORK"/{bin,lib/modules/$KVER/kernel,lib64,sbin,usr/share/udhcpc,etc,run,proc,sys,dev}

        # Busybox (static) - bundled on USB at playbook/busybox-static
        if [ -f /bin/busybox ]; then
            cp /bin/busybox "$WORK/bin/busybox"
        elif [ -f "{{ usb_root }}/playbook/busybox-static" ]; then
            cp "{{ usb_root }}/playbook/busybox-static" "$WORK/bin/busybox"
        else
            echo "ERROR: No busybox available (not at /bin/busybox or on USB)"
            exit 1
        fi
        chmod +x "$WORK/bin/busybox"
        # All applets blancco-init.sh uses: modprobe, insmod, dmesg, find, env
        # and export added vs the old narrow list.
        for cmd in sh ash awk cat chmod cp dd echo grep gunzip ifconfig ip insmod ln losetup ls mkdir mknod modprobe mount mv reboot rm rmdir route sed sleep switch_root tar udhcpc umount wget cpio dmesg env export find; do
            ln -sf busybox "$WORK/bin/$cmd"
        done

        # Full drivers/net/ tree - ethernet + phy + mdio + usb + fddi + wan.
        # Preserve path under /lib/modules/$KVER so depmod can resolve deps.
        NETDIR=/lib/modules/$KVER/kernel/drivers/net
        for sub in ethernet mdio phy usb fddi wan; do
            if [ -d "$NETDIR/$sub" ]; then
                mkdir -p "$WORK/lib/modules/$KVER/kernel/drivers/net/$sub"
                cp -r "$NETDIR/$sub/"* "$WORK/lib/modules/$KVER/kernel/drivers/net/$sub/" 2>/dev/null || true
            fi
        done
        # Overlay + squashfs + loop + usb + hid + ptp + net/core
        for modpath in fs/overlayfs fs/squashfs drivers/block drivers/usb/core drivers/usb/host drivers/hid drivers/ptp net/core; do
            if [ -e "/lib/modules/$KVER/kernel/$modpath" ]; then
                mkdir -p "$WORK/lib/modules/$KVER/kernel/$(dirname $modpath)"
                cp -r "/lib/modules/$KVER/kernel/$modpath" "$WORK/lib/modules/$KVER/kernel/$modpath" 2>/dev/null || true
            fi
        done
        # Pull in every module the copied ones depend on, from the host's
        # modules.dep. A fixed list misses them: drivers/net/mii.ko was named
        # here but ships as mii.ko.zst, so the test skipped it and usbnet,
        # r8152 (USB-C to RJ45 adapters) and cdc_ether failed with "Unknown
        # symbol mii_*"; igb likewise lacked dca and i2c-algo-bit.
        python3 - "$KVER" "$WORK" <<'PYDEP'
        import os, shutil, sys
        kver, work = sys.argv[1], sys.argv[2]
        src = f"/lib/modules/{kver}"
        dst = f"{work}/lib/modules/{kver}"
        dep = {}
        for line in open(f"{src}/modules.dep"):
            k, v = line.split(":", 1)
            dep[k] = v.split()
        have = {os.path.relpath(os.path.join(r, f), dst)
                for r, _, fs in os.walk(dst) for f in fs if ".ko" in f}
        todo, added = list(have), 0
        while todo:
            for d in dep.get(todo.pop(), []):
                if d not in have:
                    have.add(d); todo.append(d); added += 1
                    os.makedirs(os.path.dirname(f"{dst}/{d}"), exist_ok=True)
                    shutil.copy2(f"{src}/{d}", f"{dst}/{d}")
        print(f"added {added} dependency modules")
        PYDEP

        # NIC firmware the drivers request at probe (r8152/r8169 rtl_nic
        # patches, tg3, bnx2/bnx2x, e100). The kernel loads .zst firmware.
        for fw in rtl_nic tigon bnx2 bnx2x e100; do
            if [ -d "/lib/firmware/$fw" ]; then
                mkdir -p "$WORK/lib/firmware"
                cp -r "/lib/firmware/$fw" "$WORK/lib/firmware/"
            fi
        done

        # Decompress zstd modules in-place (busybox insmod can't handle .zst)
        find "$WORK/lib/modules" -name '*.ko.zst' -print0 | \
            xargs -0 -I {} sh -c 'zstd -d --rm -o "${1%.zst}" "$1" 2>/dev/null' _ {} || true

        # Preserve modules.builtin / modules.order, regenerate modules.dep so
        # modprobe can resolve dependencies inside the initramfs.
        cp /lib/modules/$KVER/modules.builtin "$WORK/lib/modules/$KVER/" 2>/dev/null || true
        cp /lib/modules/$KVER/modules.order   "$WORK/lib/modules/$KVER/" 2>/dev/null || true
        (cd "$WORK" && depmod -b . $KVER) 2>/dev/null || echo "depmod warning (non-fatal)"

        # Init script
        cp "{{ usb_root }}/playbook/blancco-init.sh" "$WORK/init"
        chmod +x "$WORK/init"

        # Build CPIO
        cd "$WORK"
        # Build beside the target and rename: a PC may be booting the old one.
        find . | cpio -o -H newc --quiet | gzip -1 > "$OUT.tmp"
        mv -f "$OUT.tmp" "$OUT"
        cd /
        rm -f "{{ web_root }}"/blancco/.kexec-initrd-{{ blancco_ksuffix }}.*.built
        touch "{{ web_root }}/blancco/.kexec-initrd-{{ blancco_ksuffix }}.{{ blancco_kver }}.built"
        echo "Built $(basename "$OUT") for $KVER: $(stat -c %s "$OUT") bytes"

    - name: "Copy Ubuntu kernel for Blancco PXE boot (vmlinuz-ubuntu-{{ blancco_ksuffix }})"
      copy:
        src: "/boot/vmlinuz-{{ blancco_kver }}"
        dest: "{{ web_root }}/blancco/vmlinuz-ubuntu-{{ blancco_ksuffix }}"
        remote_src: yes
        mode: '0644'
      when: blancco_kernel_ok

    # Secure Boot on: iPXE 2.0 starts the Canonical-signed kernel above
    # through Ubuntu's Microsoft-signed shim (GetPxeScript.aspx: shim
    # http://${server}/blancco/shimx64.efi). From the shim-signed package.
    - name: "Blancco: find Ubuntu's signed shim"
      stat:
        path: /usr/lib/shim/shimx64.efi.signed
      register: ubuntu_shim

    - name: "Blancco: publish Ubuntu's signed shim as blancco/shimx64.efi"
      copy:
        src: /usr/lib/shim/shimx64.efi.signed
        dest: "{{ web_root }}/blancco/shimx64.efi"
        remote_src: yes
        mode: '0644'
      when: ubuntu_shim.stat.exists

    - name: "Blancco: warn when the signed shim is missing"
      debug:
        msg: >-
          WARNING: /usr/lib/shim/shimx64.efi.signed not found (package
          shim-signed). Blancco with Secure Boot ON will not start; with
          Secure Boot off it still boots (the menu's shim line fails over).
      when: not ubuntu_shim.stat.exists

    - name: "Create TFTP blancco directory"
      file:
        path: "{{ tftp_dir }}/blancco"
        state: directory
        owner: nobody
        group: nogroup
        mode: '0755'

    - name: "Create TFTP symlinks for Blancco kernel/initrd (GRUB HTTP times out on large files; TFTP is reliable)"
      file:
        src: "{{ web_root }}/blancco/{{ item }}"
        dest: "{{ tftp_dir }}/blancco/{{ item }}"
        state: link
        force: yes
        owner: nobody
        group: nogroup
      loop:
        - vmlinuz-bde-linux
        - initramfs-bde-linux.img
        - intel-ucode.img
        - amd-ucode.img
        - config.img

    - name: "Build Ubuntu kernel modules tarball for Blancco (kmod-{{ blancco_kver }}.tar.gz)"
      when: blancco_kernel_ok
      shell: |
        set -e
        KVER="{{ blancco_kver }}"
        OUT="{{ web_root }}/blancco/kmod-$KVER.tar.gz"
        # Ship the host's iwlwifi firmware with its modules. The UEFI path
        # runs this Ubuntu kernel on Blancco's rootfs, and Blancco 7.20 only
        # carries API 89 ucode for AX201/AX210/AX211, which the 6.8 iwlwifi
        # (max API 86) cannot load, so WiFi licensing never came up. Files
        # only, no lib/ entry: on the Blancco rootfs lib is a symlink to
        # usr/lib and a directory entry would replace it.
        cd /
        # blancco-init.sh fetches kmod-$(uname -r).tar.gz (the booted kernel).
        tar czf "$OUT.tmp" -C / "lib/modules/$KVER" $(ls -d lib/firmware/iwlwifi-*)
        mv -f "$OUT.tmp" "$OUT"
        echo "Built $(basename "$OUT"): $(du -h "$OUT" | cut -f1)"
      args:
        creates: "{{ web_root }}/blancco/kmod-{{ blancco_kver }}.tar.gz"

    - name: "Extract config-clean.xml from config.img (strip null bytes)"
      shell: |
        if [ -f "{{ web_root }}/blancco/config.img" ]; then
            WORK=$(mktemp -d)
            cd "$WORK"
            cpio -id < "{{ web_root }}/blancco/config.img" 2>/dev/null
            tr -d '\000' < config.xml > "{{ web_root }}/blancco/config-clean.xml"
            rm -rf "$WORK"
        fi
      args:
        creates: "{{ web_root }}/blancco/config-clean.xml"

    # Idempotent file copy (was bundled into the previous shell task with a
    # 'creates:' gate, so playbook re-runs never picked up edits to the
    # source XML - stale prefs survived deploys).
    - name: "Deploy Blancco preferences.xml from playbook source"
      copy:
        src: "{{ usb_root }}/playbook/blancco-preferences.xml"
        dest: "{{ web_root }}/blancco/preferences.xml"
        mode: '0644'

    # blancco-init.sh fetches this at boot and runs it as a service in the
    # Blancco rootfs: erase progress for the webapp's /imaging dashboard.
    - name: "Deploy Blancco progress reporter"
      copy:
        src: "{{ usb_root }}/playbook/blancco-progress.py"
        dest: "{{ web_root }}/blancco/blancco-progress.py"
        mode: '0644'

    # Hard gate: blancco-init.sh in initramfs drops to shell if the served
    # preferences.xml is malformed or missing the SMB target. Fail the
    # playbook here too so the problem surfaces at deploy time, not at the
    # next erasure attempt.
    - name: "Validate deployed preferences.xml is well-formed + targets the right SMB share"
      shell: |
        set -e
        python3 -c 'import xml.etree.ElementTree as ET; ET.parse("{{ web_root }}/blancco/preferences.xml")'
        grep -q '<hostname>{{ pxe_server_ip }}</hostname>' "{{ web_root }}/blancco/preferences.xml"
        grep -q '<path>blancco-reports</path>' "{{ web_root }}/blancco/preferences.xml"
      changed_when: false

    - name: "Ensure Samba user for Blancco reports exists (idempotent)"
      shell: |
        id blancco >/dev/null 2>&1 || useradd -r -s /usr/sbin/nologin blancco
        pdbedit -L 2>/dev/null | grep -q '^blancco:' || (echo -e "blancco\nblancco" | smbpasswd -a -s blancco)
      changed_when: false

    - name: "Check for WinPE deployment content on USB"
      stat:
        path: "{{ usb_root }}/images"
      register: usb_images_dir

    - name: "Import WinPE deployment content from USB (if present)"
      shell: >
        cp -rn "{{ usb_root }}/images/{{ item }}/"* "{{ samba_share }}/{{ item }}/" 2>/dev/null || true
      loop: "{{ image_types }}"
      when: usb_images_dir.stat.exists

    - name: "Restart and enable services"
      # Held while imaging is active (see "Re-run safety"): started +
      # enabled only, so a WinPE client mid-copy keeps its SMB session.
      systemd:
        name: "{{ item }}"
        state: "{{ 'started' if pxe_hold_disruptive | bool else 'restarted' }}"
        enabled: yes
      loop:
        - dnsmasq
        - apache2
        - smbd

    - name: "Services NOT restarted (imaging in progress)"
      debug:
        msg: >-
          dnsmasq, apache2 and smbd were not restarted because imaging is
          active; config changes from this run apply at their next restart.
          Re-run when idle (or -e allow_disruptive=true) to restart them.
      when: pxe_hold_disruptive | bool

    # Firewall per interface. Imaging NIC: everything imaging needs. GE
    # corporate NIC: SSH and the webapp only. New rules go in first, then the
    # old any-interface rules are removed, so SSH is never closed mid-run.
    - name: "UFW: allow imaging services on the imaging NIC only"
      ufw:
        rule: allow
        direction: in
        interface: "{{ pxe_nic_name }}"
        port: "{{ item.port }}"
        proto: "{{ item.proto }}"
      loop: "{{ ufw_pxe_rules }}"
      loop_control:
        label: "{{ pxe_nic_name }} {{ item.port }}/{{ item.proto }}"

    - name: "UFW: allow SSH and the webapp on the GE corporate NIC (from all of GE)"
      ufw:
        rule: allow
        direction: in
        interface: "{{ corp_nic_name }}"
        port: "{{ item.port }}"
        proto: "{{ item.proto }}"
      loop: "{{ ufw_corp_rules }}"
      loop_control:
        label: "{{ corp_nic_name }} {{ item.port }}/{{ item.proto }}"
      when: corp_admin_cidrs | length == 0

    - name: "UFW: WARNING, SSH and the root webapp are open to all of GE"
      debug:
        msg:
          - "!!! WARNING: corp_admin_cidrs is empty. SSH (password auth, shared"
          - "!!! 'pxe' password) and the webapp on 9009 (no login, runs as root)"
          - "!!! accept connections from ANY host on the GE corporate network via"
          - "!!! {{ corp_nic_name }}. Set corp_admin_cidrs in playbook/site-vars.yml"
          - "!!! to the admin subnets (docs/SITE-CUSTOMIZATION.md) and re-run."
      when: corp_admin_cidrs | length == 0

    - name: "UFW: allow SSH and the webapp on the GE corporate NIC from corp_admin_cidrs only"
      ufw:
        rule: allow
        direction: in
        interface: "{{ corp_nic_name }}"
        from_ip: "{{ item.1 }}"
        port: "{{ item.0.port }}"
        proto: "{{ item.0.proto }}"
      loop: "{{ ufw_corp_rules | product(corp_admin_cidrs) | list }}"
      loop_control:
        label: "{{ corp_nic_name }} from {{ item.1 }} {{ item.0.port }}/{{ item.0.proto }}"
      when: corp_admin_cidrs | length > 0

    - name: "UFW: drop the any-source rules on the GE corporate NIC (restricted now)"
      ufw:
        rule: allow
        direction: in
        interface: "{{ corp_nic_name }}"
        port: "{{ item.port }}"
        proto: "{{ item.proto }}"
        delete: yes
      loop: "{{ ufw_corp_rules }}"
      loop_control:
        label: "{{ corp_nic_name }} any {{ item.port }}/{{ item.proto }}"
      when: corp_admin_cidrs | length > 0

    # Only drop the old any-interface rules (allow 22 among them) once both
    # named NICs exist on the right MACs and the per-interface SSH rules are
    # in UFW. Otherwise those rules would name interfaces that are not
    # there and removing the old ones would close SSH.
    - name: "UFW: verify both named NICs and their per-interface rules"
      args:
        executable: /bin/bash
      shell: |
        set -u
        bad=0
        for pair in "{{ pxe_nic_name }}={{ pxe_nic_mac | lower }}" "{{ corp_nic_name }}={{ corp_nic_mac | lower }}"; do
          n=${pair%%=*}; m=${pair#*=}
          if [ "$(cat "/sys/class/net/$n/address" 2>/dev/null)" != "$m" ]; then
            echo "ERROR: interface $n with MAC $m is not present" >&2; bad=1
          fi
        done
        added=$(ufw show added 2>/dev/null)
        for n in "{{ pxe_nic_name }}" "{{ corp_nic_name }}"; do
          if ! grep -E "allow in on $n( |$)" <<<"$added" | grep -qE 'port 22 proto tcp'; then
            echo "ERROR: no UFW 'allow in on $n ... port 22 proto tcp' rule" >&2; bad=1
          fi
        done
        [ "$bad" -eq 0 ] || { echo "the old any-interface rules are kept" >&2; exit 1; }
        echo "both NICs present, per-interface SSH rules in place"
      register: ufw_verify
      changed_when: false

    - name: "UFW: remove the old any-interface rules"
      ufw:
        rule: allow
        port: "{{ item.port }}"
        proto: "{{ item.proto }}"
        delete: yes
      loop:
        - { port: "22", proto: tcp }
        - { port: "67", proto: udp }
        - { port: "69", proto: udp }
        - { port: "80", proto: tcp }
        - { port: "4433", proto: tcp }
        - { port: "445", proto: tcp }
        - { port: "9009", proto: tcp }
      loop_control:
        label: "any {{ item.port }}/{{ item.proto }}"

    - name: "UFW: remove the stale 9011 rule (old webapp port)"
      ufw:
        rule: allow
        direction: in
        interface: "{{ pxe_nic_name }}"
        port: "9011"
        proto: tcp
        delete: yes

    - name: "Enable UFW firewall"
      ufw:
        state: enabled
        policy: deny

    # --- SSH on the GE NIC: password logins (corp_ssh_password_auth) ---
    # The drop-in sorts before 50-cloud-init.conf (autoinstall allow-pw), and
    # sshd keeps the first value it reads. "Match all" ends the block so the
    # rest of sshd_config is not scoped to it.
    - name: "SSH: password logins only from the imaging LAN (corp_ssh_password_auth: false)"
      copy:
        dest: /etc/ssh/sshd_config.d/10-pxe-corp-auth.conf
        mode: '0644'
        content: |
          # Managed by pxe_server_setup.yml (corp_ssh_password_auth: false).
          # Keys only from the GE corporate side; the shared password still
          # works from the imaging LAN and localhost.
          PasswordAuthentication no
          KbdInteractiveAuthentication no
          Match Address {{ pxe_subnet }},127.0.0.0/8,::1
              PasswordAuthentication yes
          Match all
      register: sshd_dropin_add
      when: not (corp_ssh_password_auth | bool)

    - name: "SSH: password logins allowed everywhere (corp_ssh_password_auth: true)"
      file:
        path: /etc/ssh/sshd_config.d/10-pxe-corp-auth.conf
        state: absent
      register: sshd_dropin_del
      when: corp_ssh_password_auth | bool

    - name: "SSH: check the sshd config, reload it"
      when: (sshd_dropin_add is changed) or (sshd_dropin_del is changed)
      block:
        - name: "SSH: sshd -t"
          command: /usr/sbin/sshd -t
          changed_when: false
        - name: "SSH: reload sshd"
          command: systemctl try-reload-or-restart ssh.service
      rescue:
        - name: "SSH: bad config, remove the drop-in again"
          file:
            path: /etc/ssh/sshd_config.d/10-pxe-corp-auth.conf
            state: absent
        - name: "SSH: fail"
          fail:
            msg: "sshd -t rejected the config with the corp auth drop-in; it was removed and sshd not reloaded."

    - name: "Schedule dnsmasq restart 15s after reboot"
      copy:
        dest: /etc/cron.d/dnsmasq-restart
        mode: '0644'
        content: |
          @reboot root /bin/sleep 15 && /usr/bin/systemctl restart dnsmasq.service

    # --- Updates pages (Dell drivers/BIOS, iPXE, Blancco) ---
    # The webapp downloads from downloads.dell.com and GitHub through the
    # corporate NIC and unpacks with 7z/zip; sbverify checks iPXE signatures.
    - name: "Install tools the webapp Updates pages need (if missing)"
      apt:
        name:
          - sbsigntool
          - p7zip-full
          - zip
          - unzip
          - curl
        state: present
      ignore_errors: yes

    - name: "Find the Zscaler Root CA (playbook copy, else the image share)"
      shell: |
        for f in "{{ zscaler_ca_src }}" {{ zscaler_ca_share_glob }}; do
          if [ -f "$f" ] && grep -q "BEGIN CERTIFICATE" "$f"; then
            echo "$f"
            exit 0
          fi
        done
      register: zscaler_ca
      changed_when: false
      failed_when: false

    - name: "Install the Zscaler Root CA into the system trust store"
      copy:
        src: "{{ zscaler_ca.stdout_lines[0] }}"
        dest: /usr/local/share/ca-certificates/zscaler-root-ca.crt
        owner: root
        group: root
        mode: '0644'
      when: zscaler_ca.stdout_lines | length > 0
      register: zscaler_ca_copy

    - name: "Rebuild the system CA bundle"
      command: update-ca-certificates
      when: zscaler_ca_copy is changed

    - name: "Warn when no Zscaler Root CA was found"
      debug:
        msg: "WARNING: no Zscaler Root CA at {{ zscaler_ca_src }} or {{ zscaler_ca_share_glob }}; GitHub (iPXE update check) will fail TLS until it is installed."
      when: zscaler_ca.stdout_lines | length == 0

    - name: "Create webapp Updates state directory"
      file:
        path: /var/lib/pxe-webapp/updates
        state: directory
        owner: root
        group: root
        mode: '0755'

    # --- Web Management App (Flask) ---
    - name: "Create webapp directory"
      file:
        path: /opt/pxe-webapp
        state: directory
        mode: '0755'

    - name: "Copy webapp from USB"
      # The whole tree (app, config, services, views, templates, static), every
      # run, so a re-run with a newer USB updates the app. Was: cp with
      # creates: app.py, which never updated an existing install. -i lists
      # what changed, so the service restarts only then.
      shell: |
        set -eo pipefail
        test -f "{{ usb_root }}/webapp/app.py"
        rsync -ai --delete --exclude __pycache__ "{{ usb_root }}/webapp/" /opt/pxe-webapp/
      args:
        executable: /bin/bash
      register: webapp_rsync
      changed_when: webapp_rsync.stdout | trim | length > 0

    - name: "Install webapp Python dependencies (offline wheels)"
      args:
        executable: /bin/bash
      shell: |
        # Find the pip-wheels directory on the CIDATA mount. No online
        # fallback: an unpinned pip install from PyPI is never wanted here.
        export WHEEL_DIR=""
        for d in "{{ usb_root }}/pip-wheels" "{{ usb_mount }}/pip-wheels"; do
          if [ -d "$d" ] && compgen -G "$d/*.whl" > /dev/null; then
            export WHEEL_DIR="$(cd "$d" && pwd)"
            break
          fi
        done
        if [ -z "$WHEEL_DIR" ]; then
          echo "ERROR: no pip-wheels/*.whl under {{ usb_root }} or {{ usb_mount }}." >&2
          echo "Build them with scripts/download-packages.sh and rebuild the USB." >&2
          exit 1
        fi
        # Install wheels directly using Python zipfile (bypasses pip entirely)
        # This avoids the pip3/distutils incompatibility between Ubuntu 22.04 debs and Python 3.12
        export REQS="{{ usb_root }}/webapp/requirements.txt"
        python3 << 'PYEOF'
        # Installs only the pinned wheels: the sha256 of each wheel must be one of
        # the hashes pinned for THAT package in webapp/requirements.txt, and
        # each pinned package must have exactly one wheel. A package already
        # installed at the pinned version is left alone; an older installed
        # version is removed first (by its RECORD), so an upgrade does not
        # leave the old files beside the new. Last line CHANGED / UNCHANGED.
        import zipfile, sysconfig, glob, os, re, sys, hashlib, csv, shutil
        norm = lambda n: re.sub(r'[-_.]+', '_', n).lower()
        site = sysconfig.get_path('platlib')
        wheel_dir = os.environ['WHEEL_DIR']
        reqs = open(os.environ['REQS']).read()
        pins, hashes = {}, {}
        for m in re.finditer(r'^([A-Za-z0-9_.-]+)==([^\s\\]+)((?:\s*\\?\s*--hash=sha256:[0-9a-f]{64})+)', reqs, re.M):
            name = norm(m.group(1))
            pins[name] = m.group(2)
            hashes[name] = set(re.findall(r'sha256:([0-9a-f]{64})', m.group(3)))
        wheels = sorted(glob.glob(os.path.join(wheel_dir, '*.whl')))
        seen = {}
        for whl in wheels:
            h = hashlib.sha256(open(whl, 'rb').read()).hexdigest()
            parts = os.path.basename(whl).split('-')
            name = norm(parts[0])
            if name not in pins or h not in hashes[name] or parts[1] != pins[name]:
                sys.exit(f'REFUSED: {os.path.basename(whl)} is not the pinned wheel of its package (sha256 {h[:16]}...)')
            seen.setdefault(name, []).append(whl)
        bad = [n for n in pins if len(seen.get(n, [])) != 1]
        if bad:
            sys.exit(f'REFUSED: need exactly one wheel for each pinned package; check: {", ".join(bad)}')
        changed = False
        for name, (whl,) in sorted(seen.items()):
            current = [d for d in glob.glob(os.path.join(site, '*.dist-info'))
                       if norm(os.path.basename(d)[:-len('.dist-info')].rsplit('-', 1)[0]) == name]
            if [os.path.basename(d)[:-len('.dist-info')].rsplit('-', 1)[1] for d in current] == [pins[name]]:
                continue
            for old in current:
                rec = os.path.join(old, 'RECORD')
                if os.path.isfile(rec):
                    for row in csv.reader(open(rec)):
                        if not row:
                            continue
                        f = os.path.normpath(os.path.join(site, row[0]))
                        if f.startswith(site + os.sep) and os.path.isfile(f):
                            os.remove(f)
                shutil.rmtree(old, ignore_errors=True)
            print(f'  Installing {os.path.basename(whl)}')
            with zipfile.ZipFile(whl) as z:
                z.extractall(site)
            changed = True
        print('All pinned wheels installed to ' + site)
        print('CHANGED' if changed else 'UNCHANGED')
        PYEOF
      register: webapp_wheels
      changed_when: webapp_wheels.stdout_lines | last | default('') == 'CHANGED'

    - name: "Create systemd service for PXE webapp"
      copy:
        dest: /etc/systemd/system/pxe-webapp.service
        content: |
          [Unit]
          Description=PXE Server Web Management
          After=network.target apache2.service

          [Service]
          Type=simple
          User=root
          WorkingDirectory=/opt/pxe-webapp
          Environment=SAMBA_SHARE={{ samba_share }}
          Environment=CLONEZILLA_SHARE=/srv/samba/clonezilla
          Environment=WEB_ROOT={{ web_root }}
          Environment=BLANCCO_REPORTS=/srv/samba/blancco-reports
          Environment=ENROLLMENT_SHARE=/srv/samba/enrollment
          Environment=AUDIT_LOG=/var/log/pxe-webapp-audit.log
          # Lock TZ so report/backup mtimes and audit-log timestamps render
          # in Eastern time regardless of how the host's /etc/localtime ends
          # up. Without this, a Python process started before timedatectl
          # finishes can cache UTC for its lifetime.
          Environment=TZ=America/New_York
          ExecStart=/usr/bin/python3 app.py
          Restart=always
          RestartSec=5

          [Install]
          WantedBy=multi-user.target
      register: webapp_unit

    - name: "Enable and start PXE webapp service"
      systemd:
        name: pxe-webapp
        state: started
        enabled: yes
        daemon_reload: yes
      register: webapp_started

    - name: "Restart PXE webapp (new code, wheels or unit on this run)"
      # A re-run used to leave the old code running until the next reboot.
      systemd:
        name: pxe-webapp
        state: restarted
        daemon_reload: yes
      when:
        - webapp_rsync is changed or webapp_wheels is changed or webapp_unit is changed
        - webapp_started is not changed

    # Monthly Blancco CMMC evidence pack (ENT-056/158): on the 1st, save last
    # month's ZIP to the reports share's evidence/ folder for the tech to copy
    # into Box. Persistent catches a run missed while the server was off.
    - name: "Create Blancco evidence pack service and timer"
      copy:
        dest: "/etc/systemd/system/{{ item.name }}"
        content: "{{ item.content }}"
      loop:
        - name: pxe-blancco-evidence.service
          content: |
            [Unit]
            Description=Save last month's Blancco CMMC evidence pack to the reports share

            [Service]
            Type=oneshot
            WorkingDirectory=/opt/pxe-webapp
            Environment=BLANCCO_REPORTS=/srv/samba/blancco-reports
            Environment=TZ=America/New_York
            ExecStart=/usr/bin/python3 /opt/pxe-webapp/blancco_evidence_monthly.py
        - name: pxe-blancco-evidence.timer
          content: |
            [Unit]
            Description=Monthly Blancco CMMC evidence pack

            [Timer]
            OnCalendar=*-*-01 06:00:00
            Persistent=true

            [Install]
            WantedBy=timers.target

    - name: "Enable Blancco evidence pack timer"
      systemd:
        name: pxe-blancco-evidence.timer
        state: started
        enabled: yes
        daemon_reload: yes

    - name: "Configure unified Apache site (static files + webapp proxy)"
      copy:
        dest: /etc/apache2/sites-available/pxe-server.conf
        content: |
          # 9009 listens on every address: admins use the webapp from the GE
          # corporate NIC. The webapp has NO authentication: restrict 9009
          # (and 22) on the corp NIC with corp_admin_cidrs (UFW). TODO: auth.
          Listen 9009
          <VirtualHost *:80>
              DocumentRoot {{ web_root }}
              <Directory "{{ web_root }}">
                  Options Indexes FollowSymLinks
                  AllowOverride None
                  Require all granted
              </Directory>
              ProxyPreserveHost On
              ProxyPass /manage http://127.0.0.1:9010/
              ProxyPassReverse /manage http://127.0.0.1:9010/
          </VirtualHost>
          <VirtualHost *:9009>
              Alias /static /opt/pxe-webapp/static
              <Directory "/opt/pxe-webapp/static">
                  Require all granted
                  Options -Indexes
              </Directory>
              ProxyPreserveHost On
              ProxyPass /static !
              ProxyPass / http://127.0.0.1:9010/
              ProxyPassReverse / http://127.0.0.1:9010/
          </VirtualHost>

    - name: "Enable Apache proxy modules"
      command: a2enmod proxy proxy_http
      args:
        creates: /etc/apache2/mods-enabled/proxy.load

    - name: "Disable default Apache site"
      command: a2dissite 000-default.conf
      args:
        removes: /etc/apache2/sites-enabled/000-default.conf

    - name: "Enable unified PXE server site"
      command: a2ensite pxe-server.conf
      args:
        creates: /etc/apache2/sites-enabled/pxe-server.conf

    - name: "Reload Apache after site changes"
      systemd:
        name: apache2
        state: reloaded

    # The network config (two NICs pinned by MAC) is applied near the top of
    # the play, "NICs: ..." tasks, so dnsmasq/UFW/Samba see the final names.
    # The old br-pxe bridge layout (onboard + USB NIC bonded) is gone: one NIC
    # per network, see templates/netplan-pxe.yaml.j2.

  handlers:
    - name: "reload sysctl"
      command: sysctl --system

    - name: "restart networkd-dispatcher"
      systemd:
        name: networkd-dispatcher
        state: restarted