pxe-server/playbook/shopfloor-setup/Standard/Restore-UDCData.ps1

# Restore-UDCData.ps1 - Idempotent UDC data restore for the manifest engine.
#
# Triggered by the GE Shopfloor Enforce scheduled task (runs as SYSTEM, every
# user logon + every 5 min). Standard-machine manifest entry uses
# DetectionMethod=Always so this fires every cycle; the script self-decides
# whether there's actually any work to do.
#
# CONTRACT:
#   - 99% of cycles: no backup waiting -> exit 0 in ~1 second, ~5 lines of log
#   - 1 cycle (the one after Backup-UDCData lands a backup for this PC's bay):
#     stop UDC, copy CurrentData.json + ArchivedData/ to C:\ProgramData\UDC,
#     move consumed backup to <bay>\migrated\<timestamp>\, write
#     restore.manifest.json, restart UDC. After this, root is empty so the
#     check returns "no backup waiting" again on subsequent cycles.
#
# DESIGNED FOR THE SWAP WORKFLOW:
#   New PC gets pre-imaged with real machine number + locked down, sits in
#   storage. Days/weeks later, tech runs Backup-UDCData on old PC -> backup
#   lands on share. Tech swaps PCs. New PC powers on at the bay -> ShopFloor
#   autologon -> manifest engine fires this script -> backup detected ->
#   restored -> UDC opens with prior history intact.
#
# Replaces the placeholder->real trigger in Update-MachineNumber.ps1 for the
# pre-imaged-then-swapped case (where the trigger fired at imaging time, before
# the backup existed). Update-MachineNumber.ps1's branch still handles the
# secondary case (tech used 9999 placeholder + sets number at bay) - both
# triggers safely no-op if the other already consumed the backup.
#
# LOGGING:
#   Single rotating log at C:\Logs\UDC\Restore-UDCData.log (1 MB cap, rotated
#   to .old.log on overflow). Every cycle writes a header line so even the
#   silent no-op path leaves a trace. Errors include full exception type,
#   position, and stack trace.

[CmdletBinding()]
param(
    [string]$BackupShareRoot = '\\tsgwp00525.wjs.geaerospace.net\shared\dt\shopfloor\backup\udc',
    [string]$UdcDataDir      = 'C:\ProgramData\UDC',
    [string]$UdcExePath      = 'C:\Program Files\UDC\UDC.exe',
    [string]$UdcSettingsPath = 'C:\ProgramData\UDC\udc_settings.json',
    [string]$Site            = 'West Jefferson',
    # Share can take 20-60s to become reachable from SYSTEM context after a
    # cold boot or fresh logon. Retry until then before deciding "no backup".
    [int]$ShareTimeoutSec    = 60,
    [int]$SharePollSec       = 3
)

$ErrorActionPreference = 'Continue'

# -- Logging setup --------------------------------------------------------
$logDir = 'C:\Logs\UDC'
try {
    if (-not (Test-Path $logDir)) { New-Item -Path $logDir -ItemType Directory -Force | Out-Null }
} catch { $logDir = $env:TEMP }
$logFile        = Join-Path $logDir 'Restore-UDCData.log'
$logFileMaxBytes = 1MB

# Rotate log file if oversized (keeps one prior generation)
try {
    if ((Test-Path $logFile) -and ((Get-Item $logFile).Length -gt $logFileMaxBytes)) {
        $rotated = Join-Path $logDir 'Restore-UDCData.old.log'
        if (Test-Path $rotated) { Remove-Item $rotated -Force -ErrorAction SilentlyContinue }
        Rename-Item -Path $logFile -NewName 'Restore-UDCData.old.log' -Force -ErrorAction SilentlyContinue
    }
} catch {}

function Log {
    param([string]$Msg, [string]$Level = 'INFO')
    $ts = Get-Date -Format 'yyyy-MM-dd HH:mm:ss.fff'
    $line = "[$ts][$Level] $Msg"
    try { Add-Content -LiteralPath $logFile -Value $line -ErrorAction SilentlyContinue } catch {}
    Write-Host $line
}

function LogErr {
    param($Err)
    if (-not $Err) { return }
    $exType = if ($Err.Exception) { $Err.Exception.GetType().FullName } else { '<no exception>' }
    $exMsg  = if ($Err.Exception) { $Err.Exception.Message } else { "$Err" }
    Log "  exception: $exType - $exMsg" 'ERROR'
    if ($Err.InvocationInfo -and $Err.InvocationInfo.PositionMessage) {
        $pos = ($Err.InvocationInfo.PositionMessage -replace "`r?`n", ' | ')
        Log "  at: $pos" 'ERROR'
    }
    if ($Err.ScriptStackTrace) {
        $st = ($Err.ScriptStackTrace -replace "`r?`n", ' | ')
        Log "  stack: $st" 'ERROR'
    }
    if ($Err.Exception -and $Err.Exception.InnerException) {
        Log "  inner: $($Err.Exception.InnerException.Message)" 'ERROR'
    }
}

Log '==============================================='
Log "Restore-UDCData starting (PID $PID)"
Log "Hostname:           $env:COMPUTERNAME"
try {
    $whoami = [System.Security.Principal.WindowsIdentity]::GetCurrent().Name
} catch { $whoami = '<unknown>' }
Log "User identity:      $whoami"
Log "PowerShell version: $($PSVersionTable.PSVersion)"
Log "BackupShareRoot:    $BackupShareRoot"
Log "UdcDataDir:         $UdcDataDir"
Log "UdcSettingsPath:    $UdcSettingsPath"
Log "ShareTimeoutSec:    $ShareTimeoutSec   SharePollSec: $SharePollSec"

# -- Resolve local machine number ----------------------------------------
if (-not (Test-Path -LiteralPath $UdcSettingsPath)) {
    Log "udc_settings.json not present - UDC not installed yet, no work to do."
    Log 'Exit 0.'
    exit 0
}
try {
    $json = Get-Content -LiteralPath $UdcSettingsPath -Raw -ErrorAction Stop | ConvertFrom-Json -ErrorAction Stop
    $mn = $json.GeneralSettings.MachineNumber
    Log "Resolved MachineNumber from udc_settings: $mn"
} catch {
    Log "Failed to parse $UdcSettingsPath" 'ERROR'
    LogErr $_
    Log 'Exit 0.'
    exit 0
}
if (-not $mn -or $mn -eq '9999' -or $mn -notmatch '^\d+$') {
    Log "Machine number is placeholder/empty/non-numeric ('$mn'). Update-MachineNumber.ps1's branch will catch the placeholder->real transition. No work to do."
    Log 'Exit 0.'
    exit 0
}

# -- Wait for the share to be reachable ---------------------------------
# When this script runs early in a logon (e.g. via GE-Enforce on autologon),
# the SFLD share via the SMB redirector can take 20-60 seconds to become
# reachable, especially in SYSTEM context where the credential is the
# computer account. Poll until reachable or timeout before deciding "no backup".
Log "Polling share root for reachability: $BackupShareRoot"
$shareReachable = $false
$sw = [Diagnostics.Stopwatch]::StartNew()
while ($sw.Elapsed.TotalSeconds -lt $ShareTimeoutSec) {
    if (Test-Path -LiteralPath $BackupShareRoot) {
        $shareReachable = $true
        break
    }
    Start-Sleep -Seconds $SharePollSec
}
$sw.Stop()
if ($shareReachable) {
    Log ("Share reachable after {0:N1} s" -f $sw.Elapsed.TotalSeconds)
} else {
    Log "Share NOT reachable after $ShareTimeoutSec s. Cannot probe for backup. Exiting non-zero so the dispatcher logs a failure." 'ERROR'
    Log 'Exit 1.'
    exit 1
}

# -- Probe for a waiting backup ------------------------------------------
$bayDir = Join-Path $BackupShareRoot $mn
$srcCur = Join-Path $bayDir 'CurrentData.json'
$srcArc = Join-Path $bayDir 'ArchivedData'
Log "Probing backup paths for bay $mn"
Log "  bayDir: $bayDir"
$bayDirExists = Test-Path -LiteralPath $bayDir
Log "  bayDir exists:        $bayDirExists"
$srcCurExists = Test-Path -LiteralPath $srcCur
Log "  CurrentData.json src: $(if ($srcCurExists) { 'present' } else { 'absent' }) - $srcCur"
$srcArcExists = Test-Path -LiteralPath $srcArc
Log "  ArchivedData/ src:    $(if ($srcArcExists) { 'present' } else { 'absent' }) - $srcArc"

if (-not $srcCurExists) {
    Log "No backup waiting for bay $mn - no work to do this cycle."
    Log 'Exit 0.'
    exit 0
}

# -- We have a backup. Restore. ------------------------------------------
Log "Backup waiting at $bayDir - proceeding with restore"

# Stop UDC.exe so CurrentData.json isn't locked
$udcProcs = @(Get-Process UDC -ErrorAction SilentlyContinue)
Log "UDC processes currently running: $($udcProcs.Count)"
foreach ($p in $udcProcs) {
    try {
        Log "  stopping UDC.exe PID $($p.Id)"
        $p.Kill()
        $p.WaitForExit(5000) | Out-Null
        Log "    stopped"
    } catch {
        Log "    could not stop UDC.exe PID $($p.Id)" 'WARN'
        LogErr $_
    }
}
Start-Sleep -Milliseconds 500

# Ensure local UDC data dir exists
if (-not (Test-Path -LiteralPath $UdcDataDir)) {
    Log "Creating local UDC data dir: $UdcDataDir"
    try {
        New-Item -Path $UdcDataDir -ItemType Directory -Force | Out-Null
    } catch {
        Log "Failed to create $UdcDataDir - cannot continue" 'ERROR'
        LogErr $_
        Log 'Exit 1.'
        exit 1
    }
}
$localCur = Join-Path $UdcDataDir 'CurrentData.json'
$localArc = Join-Path $UdcDataDir 'ArchivedData'

# Copy CurrentData.json
$copiedCur = $false
Log "Copying CurrentData.json"
Log "  src: $srcCur"
Log "  dst: $localCur"
try {
    Copy-Item -LiteralPath $srcCur -Destination $localCur -Force -ErrorAction Stop
    $copiedCur = $true
    $sz = (Get-Item -LiteralPath $localCur).Length
    Log "  OK ($sz bytes)"
} catch {
    Log "  FAILED" 'ERROR'
    LogErr $_
}

# Copy ArchivedData/
$copiedArc = $false
$arcFiles  = 0
$arcBytes  = 0
if ($srcArcExists) {
    Log "Copying ArchivedData/"
    Log "  src: $srcArc"
    Log "  dst: $localArc"
    try {
        if (Test-Path -LiteralPath $localArc) {
            Log "  removing existing $localArc"
            Remove-Item -LiteralPath $localArc -Recurse -Force -ErrorAction SilentlyContinue
        }
        Copy-Item -LiteralPath $srcArc -Destination $localArc -Recurse -Force -ErrorAction Stop
        $arcItems = Get-ChildItem -LiteralPath $localArc -Recurse -File -ErrorAction SilentlyContinue
        $arcFiles = @($arcItems).Count
        $arcBytes = ($arcItems | Measure-Object Length -Sum).Sum
        $copiedArc = $true
        Log "  OK ($arcFiles files, $arcBytes bytes)"
    } catch {
        Log "  FAILED" 'ERROR'
        LogErr $_
    }
} else {
    Log "ArchivedData/ not present in backup - skipping that copy step"
}

# One-shot consumption: only move backup -> migrated/ if everything required succeeded
$consumeOk = ($copiedCur -and ($copiedArc -or -not $srcArcExists))
Log "consumeOk=$consumeOk (copiedCur=$copiedCur, copiedArc=$copiedArc, srcArcExists=$srcArcExists)"

if ($consumeOk) {
    try {
        $stamp    = Get-Date -Format 'yyyy-MM-ddTHH-mm-ssZ'
        $migDir   = Join-Path $bayDir 'migrated'
        $migStamp = Join-Path $migDir $stamp
        Log "Moving consumed backup to $migStamp"
        if (-not (Test-Path -LiteralPath $migDir))   { New-Item -ItemType Directory -Path $migDir   -Force | Out-Null }
        if (-not (Test-Path -LiteralPath $migStamp)) { New-Item -ItemType Directory -Path $migStamp -Force | Out-Null }

        Move-Item -LiteralPath $srcCur -Destination (Join-Path $migStamp 'CurrentData.json') -Force -ErrorAction Stop
        Log "  moved CurrentData.json"
        if (Test-Path -LiteralPath $srcArc) {
            Move-Item -LiteralPath $srcArc -Destination (Join-Path $migStamp 'ArchivedData') -Force -ErrorAction Stop
            Log "  moved ArchivedData/"
        }
        $bakManifest = Join-Path $bayDir 'backup.manifest.json'
        if (Test-Path -LiteralPath $bakManifest) {
            Move-Item -LiteralPath $bakManifest -Destination (Join-Path $migStamp 'backup.manifest.json') -Force -ErrorAction SilentlyContinue
            Log "  moved backup.manifest.json"
        }

        $restoreManifest = [ordered]@{
            RestoredAt          = (Get-Date -Format 'o')
            DestinationHostname = $env:COMPUTERNAME
            DestinationUser     = $whoami
            MachineNumber       = $mn
            CurrentDataBytes    = (Get-Item -LiteralPath $localCur).Length
            ArchivedDataFiles   = $arcFiles
            ArchivedDataBytes   = $arcBytes
            RestoredVia         = 'Restore-UDCData.ps1 (manifest engine, on logon)'
        }
        $restoreManifest | ConvertTo-Json | Set-Content -Path (Join-Path $migStamp 'restore.manifest.json') -Encoding UTF8
        Log "  wrote restore.manifest.json"

        Log "Backup consumed -> migrated\$stamp\"
    } catch {
        Log "Move-to-migrated FAILED (data IS restored locally; live backup remains, next cycle will retry consumption)" 'ERROR'
        LogErr $_
    }
} else {
    Log "Restore incomplete - leaving live backup at $bayDir for retry next cycle." 'WARN'
}

# Relaunch UDC with the current machine number args. UDC's vendor autostart in
# HKLM\Run will also fire on the next user logon, so this is belt-and-suspenders
# for the same-session case (e.g. tech is at the keyboard during the restore).
if ((Test-Path -LiteralPath $UdcExePath) -and $copiedCur) {
    Log "Relaunching UDC.exe: `"$Site`" -$mn"
    try {
        Start-Process -FilePath $UdcExePath -ArgumentList @("`"$Site`"", "-$mn")
        Log "  relaunched"
    } catch {
        Log "  UDC relaunch FAILED" 'WARN'
        LogErr $_
    }
}

Log 'Exit 0.'
Log '==============================================='
exit 0