7298d433eb
OLD design: a single 'Check Machine Number' scheduled task ran as the
logged-in user (BUILTIN\Users, Limited) on AtLogOn. It both showed the
InputBox AND tried to update HKLM\SOFTWARE\WOW6432Node\GE Aircraft
Engines\DNC\General + C:\ProgramData\UDC\udc_settings.json. To make
those non-admin writes possible, 02-MachineNumberACLs.ps1 pre-granted
BUILTIN\Users SetValue + Modify on those targets during imaging.
Three problems with that:
1. SECURITY: any logged-in user could overwrite the machine-identity
reg key.
2. FRAGILE: ACL grants raced with eDNC install timing on some bays
(eDNC reg key didn't exist yet when 02-MachineNumberACLs ran;
OpenSubKey returned null, ACL silently skipped, Check-MachineNumber
later failed with PermissionDenied).
3. SILENT-SUCCESS BUG: Update-MachineNumber's Set-ItemProperty calls
lacked -ErrorAction Stop. PermissionDenied is a non-terminating
error in PS5.1, so the try/catch never fired. The script set
$out.EdncUpdated=$true anyway and the dialog reported success
while the reg value stayed at 9999. WJF capture log on FGY07FZ3
shows this exact pattern.
NEW design - two scheduled tasks split by responsibility:
- "Prompt Machine Number" : AtLogOn trigger, BUILTIN\Users (Limited).
Reads current values (read-only). If 9999, shows InputBox. Writes
typed number to C:\Logs\SFLD\machine-number-request.txt. Triggers
SYSTEM Apply via schtasks /run. Polls for result JSON (60s timeout).
Shows result MessageBox with TopMost so it isn't hidden behind
other windows.
- "Apply Machine Number" : on-demand, SYSTEM (Highest). Reads the
request file, calls Update-MachineNumber (full HKLM + ProgramData
access from SYSTEM context). Pulls per-machine NTLARS .reg + UDC
settings JSON + UDC live data from the SFLD share if site-config
has share paths. Writes result JSON. Removes request file.
Unregisters the Prompt task on full success (Prompt itself can't
self-unregister - Limited users can't delete a SYSTEM-owned task).
- Default task SDDL only allows Admins + SYSTEM to read/run a
SYSTEM-owned task. Added BUILTIN\Users GR+GX ACE via COM
SetSecurityDescriptor so the Limited Prompt task can schtasks /run
Apply on demand. They can read + execute it; not modify or delete.
- Update-MachineNumber.ps1 writes now have -ErrorAction Stop so
PermissionDenied actually fires the catch block instead of being
swallowed.
- 02-MachineNumberACLs.ps1 gutted to a no-op (left in place for
Stage-Dispatcher discovery; no longer grants the ACLs). Old bays'
existing grants are harmless since SYSTEM ignores them.
- Register-CheckMachineNumberTask.ps1 now installs both tasks AND
unregisters the legacy 'Check Machine Number' task name on
re-imaging. Run-ShopfloorSetup.ps1's $skipInBaseline list now
includes Prompt-MachineNumber.ps1 + Apply-MachineNumber.ps1 so
they aren't auto-run during the baseline pass (only via the
scheduled tasks).
Smoke tested end-to-end on win11 VM with ShopFloor (Limited) logging in
interactively: AtLogOn trigger fired Prompt, dialog rendered, tech
typed 7777, schtasks /run succeeded (the SDDL fix lets Limited users
trigger SYSTEM tasks), Apply ran as SYSTEM, eDNC reg + machine-number.txt
both updated to 7777, result MessageBox shown, Prompt task auto-
unregistered by Apply's cleanup step. No ACL grants needed on any user.
Apply also re-tested with -ErrorAction Stop confirming non-terminating
PermissionDenied now properly throws into the catch + populates Errors[]
+ flips $out.EdncUpdated to false - so any future write failures will
report honestly instead of silently claiming success.
30 lines
1.6 KiB
PowerShell
30 lines
1.6 KiB
PowerShell
# 02-MachineNumberACLs.ps1 - NO-OP (deprecated 2026-05-24).
|
|
#
|
|
# This script used to grant BUILTIN\Users SetValue on the eDNC reg key
|
|
# and Modify on the UDC ProgramData dir so the logged-in user could
|
|
# update machine number from the Check-MachineNumber logon dialog without
|
|
# elevation.
|
|
#
|
|
# That design had two flaws:
|
|
# 1. Security hole - any logged-in user could overwrite the machine-
|
|
# identity reg key.
|
|
# 2. Fragile - ACL grants raced with eDNC install timing on some bays;
|
|
# the OpenSubKey call returned null + the grant was silently skipped,
|
|
# leaving Check-MachineNumber unable to update the bay (yet the old
|
|
# Update-MachineNumber.ps1 reported success anyway because
|
|
# Set-ItemProperty's PermissionDenied is non-terminating).
|
|
#
|
|
# Replaced by the two-task design in Register-CheckMachineNumberTask.ps1:
|
|
# - "Prompt Machine Number" : user-context GUI, no privileges
|
|
# - "Apply Machine Number" : SYSTEM-context worker, full HKLM access
|
|
#
|
|
# Left as a no-op so Stage-Dispatcher / Run-ShopfloorSetup discovery
|
|
# patterns don't have to be updated. Existing bays' ACL grants are still
|
|
# present and harmless (the SYSTEM Apply task ignores them).
|
|
|
|
$logDir = 'C:\Logs\SFLD'
|
|
if (-not (Test-Path $logDir)) { try { New-Item -ItemType Directory -Path $logDir -Force | Out-Null } catch {} }
|
|
try { Start-Transcript -Path (Join-Path $logDir '02-MachineNumberACLs.log') -Append -Force | Out-Null } catch {}
|
|
Write-Host "02-MachineNumberACLs.ps1: no-op (replaced by SYSTEM Apply task - see Register-CheckMachineNumberTask.ps1)"
|
|
try { Stop-Transcript | Out-Null } catch {}
|