fdf63ab32f
Fixes Keyence (and CMM/WaxTrace) imaging where the target got only partial data: the Y: SMB mount goes idle-dead during WIM apply, so WinPE staging dies early (often just after site-config.json + ppkg). The first-logon self-heal was meant to recover but its scripts were themselves staged past the death point, so nothing ran. - FlatUnattendW10-shopfloor.xml: new FirstLogonCommands Order-4 bootstrap that mounts the enrollment share fresh and pulls Fetch-StagingPayload / Verify-And-Heal-Staging / enrollment scripts into C:\Enrollment before the Order 5/6 heal runs. Recovery no longer depends on WinPE staging surviving. Keep CommandLine <=320 and Description <=252 chars: exceeding the unattend schema length limits makes the whole oobeSystem pass invalid (OOBE prompts, no autologon). - Verify-And-Heal-Staging.ps1: add Keyence and WaxTrace heavy-payload heal branches (previously only CMM). Keyence re-pulls installers-post\keyence\ <model> -> C:\KeyenceInstall\<model>; WaxTrace re-pulls the bundle (minus formtracepak) plus the bay-matched FORMTRACEPAK-V<ver>.iso. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
202 lines
12 KiB
XML
202 lines
12 KiB
XML
<?xml version="1.0"?>
|
|
<unattend xmlns="urn:schemas-microsoft-com:unattend">
|
|
<settings pass="windowsPE">
|
|
</settings>
|
|
<settings pass="offlineServicing">
|
|
<component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="*arch*" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
|
|
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
|
|
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
|
|
<DriverPaths>
|
|
<PathAndCredentials xmlns="" wcm:keyValue="1" action="add">
|
|
<Path>W:\Drivers</Path>
|
|
</PathAndCredentials>
|
|
</DriverPaths>
|
|
</component>
|
|
</settings>
|
|
<settings pass="specialize">
|
|
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="*arch*" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
|
|
<ComputerName>H%serialnumber%</ComputerName>
|
|
<RegisteredOrganization>GE Aerospace</RegisteredOrganization>
|
|
<RegisteredOwner>GE</RegisteredOwner>
|
|
<TimeZone>Eastern Standard Time</TimeZone>
|
|
</component>
|
|
<component name="Microsoft-Windows-Deployment" processorArchitecture="*arch*" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
|
|
<RunSynchronous>
|
|
<RunSynchronousCommand wcm:action="add">
|
|
<Order>1</Order>
|
|
<Path>powershell.exe -ExecutionPolicy Bypass -Command "Import-Certificate -FilePath 'C:\Deploy\Applications\GE_External_Root_CA_2_1.cer' -CertStoreLocation 'Cert:\LocalMachine\Root'"</Path>
|
|
<Description>Install External Root Certificate</Description>
|
|
</RunSynchronousCommand>
|
|
<RunSynchronousCommand wcm:action="add">
|
|
<Order>2</Order>
|
|
<Path>powershell.exe -ExecutionPolicy Bypass -Command "Import-Certificate -FilePath 'C:\Deploy\Applications\GE_External_Intermediate_CA_2_1.cer' -CertStoreLocation 'Cert:\LocalMachine\CA'"</Path>
|
|
<Description>Install External Intermediate Certificate</Description>
|
|
</RunSynchronousCommand>
|
|
<RunSynchronousCommand wcm:action="add">
|
|
<Order>3</Order>
|
|
<Path>powershell.exe -ExecutionPolicy Bypass -Command "Import-Certificate -FilePath 'C:\Deploy\Applications\GE_Enterprise_Root_CA_2_1.cer' -CertStoreLocation 'Cert:\LocalMachine\Root'"</Path>
|
|
<Description>Install Enterprise Root Certificate</Description>
|
|
</RunSynchronousCommand>
|
|
<RunSynchronousCommand wcm:action="add">
|
|
<Order>4</Order>
|
|
<Path>powershell.exe -ExecutionPolicy Bypass -Command "Import-Certificate -FilePath 'C:\Deploy\Applications\GE_Enterprise_Device_Issuing_CA_2_1.cer' -CertStoreLocation 'Cert:\LocalMachine\CA'"</Path>
|
|
<Description>Install Enterprise Device Issuing Certificate</Description>
|
|
</RunSynchronousCommand>
|
|
<RunSynchronousCommand wcm:action="add">
|
|
<Order>5</Order>
|
|
<Path>powershell.exe -ExecutionPolicy Bypass -Command "Import-Certificate -FilePath 'C:\Deploy\Applications\GE_Enterprise_Server_Issuing_CA_2_1.cer' -CertStoreLocation 'Cert:\LocalMachine\CA'"</Path>
|
|
<Description>Install Enterprise Server Issuing Certificate</Description>
|
|
</RunSynchronousCommand>
|
|
<RunSynchronousCommand wcm:action="add">
|
|
<Order>6</Order>
|
|
<Path>powershell.exe -ExecutionPolicy Bypass -Command "Import-Certificate -FilePath 'C:\Deploy\Applications\GE_Enterprise_Smart_Card_Issuing_CA_2_1.cer' -CertStoreLocation 'Cert:\LocalMachine\CA'"</Path>
|
|
<Description>Install Enterprise SmartCard Issuing Certificate</Description>
|
|
</RunSynchronousCommand>
|
|
<RunSynchronousCommand wcm:action="add">
|
|
<Order>7</Order>
|
|
<Path>powershell.exe -ExecutionPolicy Bypass -Command "Import-Certificate -FilePath 'C:\Deploy\Applications\GE_Enterprise_User_Issuing_CA_2_1.cer' -CertStoreLocation 'Cert:\LocalMachine\CA'"</Path>
|
|
<Description>Install Enterprise User Issuing Certificate</Description>
|
|
</RunSynchronousCommand>
|
|
<RunSynchronousCommand wcm:action="add">
|
|
<Order>8</Order>
|
|
<Path>powershell.exe -ExecutionPolicy Bypass -Command "Import-Certificate -FilePath 'C:\Deploy\Applications\GE_Aerospace_Enterprise_Root_CA_1.cer' -CertStoreLocation 'Cert:\LocalMachine\Root'"</Path>
|
|
<Description>Install Aerospace Enterprise Root Certificate</Description>
|
|
</RunSynchronousCommand>
|
|
<RunSynchronousCommand wcm:action="add">
|
|
<Order>9</Order>
|
|
<Path>powershell.exe -ExecutionPolicy Bypass -Command "Import-Certificate -FilePath 'C:\Deploy\Applications\ZscalerCommercialCertificate-2048-SHA256.crt' -CertStoreLocation 'Cert:\LocalMachine\Root'"</Path>
|
|
<Description>Install Zscaler Commercial Certificate</Description>
|
|
</RunSynchronousCommand>
|
|
<RunSynchronousCommand wcm:action="add">
|
|
<Path>reg.exe add "HKLM\System\CurrentControlSet\Control\Network\NewNetworkWindowOff" /f </Path>
|
|
<Description>Disable Network Windows</Description>
|
|
<Order>10</Order>
|
|
</RunSynchronousCommand>
|
|
<RunSynchronousCommand wcm:action="add">
|
|
<Order>11</Order>
|
|
<Path>netsh wlan add profile filename="C:\Deploy\Applications\extra\wireless\WiFi-Profile.xml" user=all</Path>
|
|
<Description>Install INTERNETACCESS WiFi Profile</Description>
|
|
</RunSynchronousCommand>
|
|
<RunSynchronousCommand wcm:action="add">
|
|
<Order>12</Order>
|
|
<Path>powershell.exe -ExecutionPolicy Bypass -Command "Enable-PSRemoting -Force -SkipNetworkProfileCheck"</Path>
|
|
<Description>Enable WinRM</Description>
|
|
</RunSynchronousCommand>
|
|
<RunSynchronousCommand wcm:action="add">
|
|
<Order>13</Order>
|
|
<Path>reg.exe add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\OOBE" /v BypassNRO /t REG_DWORD /d 1 /f</Path>
|
|
<Description>Bypass OOBE network requirement</Description>
|
|
</RunSynchronousCommand>
|
|
<RunSynchronousCommand wcm:action="add">
|
|
<Order>14</Order>
|
|
<Path>reg.exe add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\OOBE" /v SkipMachineOOBE /t REG_DWORD /d 1 /f</Path>
|
|
<Description>Skip machine OOBE phase</Description>
|
|
</RunSynchronousCommand>
|
|
<RunSynchronousCommand wcm:action="add">
|
|
<Order>15</Order>
|
|
<Path>reg.exe add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\OOBE" /v SkipUserOOBE /t REG_DWORD /d 1 /f</Path>
|
|
<Description>Skip user OOBE phase</Description>
|
|
</RunSynchronousCommand>
|
|
</RunSynchronous>
|
|
</component>
|
|
</settings>
|
|
<settings pass="oobeSystem">
|
|
<component name="Microsoft-Windows-International-Core" processorArchitecture="*arch*" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
|
|
<InputLocale>en-US</InputLocale>
|
|
<SystemLocale>en-US</SystemLocale>
|
|
<UILanguage>en-US</UILanguage>
|
|
<UserLocale>en-US</UserLocale>
|
|
</component>
|
|
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="*arch*" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
|
|
<OOBE>
|
|
<HideEULAPage>true</HideEULAPage>
|
|
<HideLocalAccountScreen>true</HideLocalAccountScreen>
|
|
<HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
|
|
<HideOnlineAccountScreens>true</HideOnlineAccountScreens>
|
|
<HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
|
|
<ProtectYourPC>3</ProtectYourPC>
|
|
</OOBE>
|
|
<UserAccounts>
|
|
<LocalAccounts>
|
|
<LocalAccount wcm:action="add">
|
|
<Password>
|
|
<Value>Pa55word</Value>
|
|
<PlainText>true</PlainText>
|
|
</Password>
|
|
<Name>SupportUser</Name>
|
|
<Group>Administrators</Group>
|
|
<DisplayName>SupportUser</DisplayName>
|
|
</LocalAccount>
|
|
</LocalAccounts>
|
|
</UserAccounts>
|
|
<AutoLogon>
|
|
<Password>
|
|
<Value>Pa55word</Value>
|
|
<PlainText>true</PlainText>
|
|
</Password>
|
|
<Enabled>true</Enabled>
|
|
<Username>SupportUser</Username>
|
|
<LogonCount>7</LogonCount>
|
|
</AutoLogon>
|
|
<FirstLogonCommands>
|
|
<SynchronousCommand wcm:action="add">
|
|
<Order>1</Order>
|
|
<CommandLine>cmd.exe /c powercfg /change monitor-timeout-ac 0 & powercfg /change monitor-timeout-dc 0 & powercfg /change standby-timeout-ac 0 & powercfg /change standby-timeout-dc 0</CommandLine>
|
|
<Description>Disable display and sleep timeout during setup</Description>
|
|
</SynchronousCommand>
|
|
<SynchronousCommand wcm:action="add">
|
|
<Order>2</Order>
|
|
<CommandLine>powershell.exe -ExecutionPolicy Bypass -Command "Get-NetAdapter -Physical | Where-Object { $_.InterfaceDescription -match 'Wi-Fi|Wireless' } | Set-NetIPInterface -InterfaceMetric 10; Get-NetAdapter -Physical | Where-Object { $_.InterfaceDescription -notmatch 'Wi-Fi|Wireless' } | Set-NetIPInterface -InterfaceMetric 100"</CommandLine>
|
|
<Description>Prioritize WiFi over ethernet</Description>
|
|
</SynchronousCommand>
|
|
<SynchronousCommand wcm:action="add">
|
|
<Order>3</Order>
|
|
<CommandLine>powershell.exe -ExecutionPolicy Bypass -Command "Get-NetConnectionProfile | Set-NetConnectionProfile -NetworkCategory Private"</CommandLine>
|
|
<Description>Set network profile to Private</Description>
|
|
</SynchronousCommand>
|
|
<SynchronousCommand wcm:action="add">
|
|
<Order>4</Order>
|
|
<CommandLine>powershell.exe -ep Bypass -Command "net use Z: \\172.16.9.1\enrollment /user:pxe-upload pxe; robocopy Z:\shopfloor-setup C:\Enrollment Fetch-StagingPayload.ps1 Verify-And-Heal-Staging.ps1 /R:2 /W:2; robocopy Z:\scripts C:\Enrollment run-enrollment.ps1 wait-for-internet.ps1 migrate-to-wifi.ps1 /R:2 /W:2"</CommandLine>
|
|
<Description>Bootstrap self-heal: pull Fetch/Verify-Heal + enrollment scripts from the PXE share so Order 5/6 run after an early WinPE staging failure.</Description>
|
|
</SynchronousCommand>
|
|
<SynchronousCommand wcm:action="add">
|
|
<Order>5</Order>
|
|
<CommandLine>powershell.exe -ExecutionPolicy Bypass -File "C:\Enrollment\Fetch-StagingPayload.ps1"</CommandLine>
|
|
<Description>Fetch bulk staging (shopfloor-setup tree + preinstall bundle) from the PXE share on a fresh mount, BEFORE the production-network switch takes the bay off the imaging LAN. Detailed log at C:\Logs\Fetch\.</Description>
|
|
</SynchronousCommand>
|
|
<SynchronousCommand wcm:action="add">
|
|
<Order>6</Order>
|
|
<CommandLine>powershell.exe -ExecutionPolicy Bypass -File "C:\Enrollment\Verify-And-Heal-Staging.ps1"</CommandLine>
|
|
<Description>Verify + re-pull any missing imaging payload from the PXE share (CMM/Keyence/WaxTrace bundles + bay backup) on the imaging LAN before the production-network switch. Log C:\Logs\Fetch.</Description>
|
|
</SynchronousCommand>
|
|
<SynchronousCommand wcm:action="add">
|
|
<Order>7</Order>
|
|
<CommandLine>powershell.exe -ExecutionPolicy Bypass -File "C:\Enrollment\wait-for-internet.ps1"</CommandLine>
|
|
<Description>Prompt to connect production network then wait for TCP 443 connectivity</Description>
|
|
</SynchronousCommand>
|
|
<SynchronousCommand wcm:action="add">
|
|
<Order>8</Order>
|
|
<CommandLine>powershell.exe -ExecutionPolicy Bypass -File "C:\Enrollment\migrate-to-wifi.ps1"</CommandLine>
|
|
<Description>Migrate from wired to WiFi if WiFi adapter present, else stay on wired</Description>
|
|
</SynchronousCommand>
|
|
<SynchronousCommand wcm:action="add">
|
|
<Order>9</Order>
|
|
<CommandLine>msiexec.exe /i "C:\PreInstall\installers\powershell7\PowerShell-7.5.4-win-x64.msi" /qn /norestart ADD_PATH=1 USE_MU=0 ENABLE_MU=0 DISABLE_TELEMETRY=1</CommandLine>
|
|
<Description>Install PowerShell 7 BEFORE PPKG so Intune SetupCredentials Win32App finds pwsh.exe (race fix)</Description>
|
|
</SynchronousCommand>
|
|
<SynchronousCommand wcm:action="add">
|
|
<Order>10</Order>
|
|
<CommandLine>powershell.exe -ExecutionPolicy Bypass -File "C:\run-enrollment.ps1"</CommandLine>
|
|
<Description>Run GCCH Enrollment</Description>
|
|
</SynchronousCommand>
|
|
<SynchronousCommand wcm:action="add">
|
|
<Order>11</Order>
|
|
<CommandLine>powershell.exe -ExecutionPolicy Bypass -File "C:\Enrollment\Run-ShopfloorSetup.ps1"</CommandLine>
|
|
<Description>Run shopfloor PC type setup</Description>
|
|
</SynchronousCommand>
|
|
</FirstLogonCommands>
|
|
<TimeZone>Eastern Standard Time</TimeZone>
|
|
</component>
|
|
</settings>
|
|
</unattend>
|