76165495ff
- Shopfloor PC type menu (CMM, WaxAndTrace, Keyence, Genspect, Display, Standard) - Baseline scripts: OpenText CSF, Start Menu shortcuts, network/WinRM, power/display - Standard type: eDNC + MarkZebra with 64-bit path mirroring - CMM type: Hexagon CLM Tools, PC-DMIS 2016/2019 R2 - Display sub-type: Lobby vs Dashboard - Webapp: enrollment management, image config editor, UI refresh - Upload-Image.ps1: robocopy MCL cache to PXE server - Download-Drivers.ps1: Dell driver download pipeline - Slim Blancco GRUB EFI (10MB -> 660KB) for old hardware compat - Shopfloor display imaging guide docs Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
1.4 KiB
1.4 KiB
Shopfloor Display MicroPC Imaging Guide
Prerequisites
- MicroPC connected to PXE switch
- USB mouse and keyboard connected
- PXE server running and reachable
Step 1: BIOS Configuration
- Power on the MicroPC and tap F12 to reach the One-Time-Boot menu.
- Select BIOS Setup.
- Enable Advanced Setup.
- Select Boot Configuration:
- Verify Enable Secure Boot is ON
- Verify Enable Microsoft UEFI CA is set to Enabled
- Select Storage:
- Verify AHCI/NVMe is selected
- Select Connection:
- Verify Integrated NIC is set to Enabled with PXE
- Click Apply Changes, then click OK.
- Click Exit and immediately begin tapping F12 again.
Step 2: PXE Boot
- Once you're back in the One-Time-Boot menu, select the IPV4 option.
- In the PXE Boot Menu, select Windows PE (Image Deployment) (auto-selected after 30 seconds).
- Hit any key to verify Secure Boot is enabled, or wait 5 seconds to automatically continue.
Step 3: Image Selection
- For the WinPE Setup Menu, select 3. GEA Shopfloor.
- For GCCH Enrollment Profile, select 1. No Office.
- For Shopfloor PC Type, select 5. Display.
- For Display Type, select 2. Dashboard.
Step 4: Imaging
- Once GE Image Setup launches, click Start.
- From this point the process is mostly automated.
- Note the Serial Number from the screen and let Patrick know it's a Shopfloor Display.