Stop the collector being able to set a printer assignment

The printer feature rests on one rule: a collector report is OBSERVED state and
never ASSIGNED state. If a drifted bay's own state can become what it is told to
install, enforcement stops meaning anything, because a bay that installed the
wrong printer makes itself right simply by reporting it.

_sync_printer_links broke that rule. It ran on every collector PC push and, when
the payload carried defaultprinter or printers, wrote defaultprinter and
connectedto rows from the report - defaultprinter being one of the two types
_reconcile_edges is meant to own alone, from authenticated routes a human calls.

It was recorded as dormant. It was not. The collector schema ADVERTISED both
keys and the example client in COLLECTOR-INTEGRATION.md set
$payload['defaultprinter'], so the documentation was recruiting callers for it -
while the same document, under "Observed is not assigned", promised that nothing
on this path writes a usesprinter or defaultprinter row. The document
contradicted itself and the code followed the wrong half. Nothing in the fleet
armed it, because the first-party reporter never sent those fields, but any
third-party client written from the docs would have.

Retired the function, its _sync_one helper and the now-unused
PRINTER_LINK_ORIGIN label, and removed both keys from the schema.

IGNORED, NOT REJECTED. Unknown payload keys are not validated, so a client
written against the old docs keeps pushing successfully and only its printer
keys stop doing anything. The response warns, naming the keys and pointing at
POST /api/collector/printers for reporting queues and seed-from-observed for
adopting them. Dropping them in silence would leave an integrator believing
assignments were still being written, which is a worse failure than the one
being fixed.

The docs were the larger half of this. The schema table rows are gone, the
"PC -> printer relationship sync" section is replaced by a note saying what
happens now to anyone still sending the keys, and the example client no longer
enumerates Win32_Printer at all - it points at Report-PrintersToShopDB.ps1,
which posts to the observed endpoint and posts NOTHING on a failed enumeration,
since an empty list would erase the host's rows.

test_collector_printers.py pinned the old behaviour, so it now pins the
opposite: the keys create no relationships, the push still succeeds and says
why, a payload without them stays quiet, a human-made default survives a report
naming a different printer, and the schema no longer offers the keys.

CHANGELOG.md

@@ -139,6 +139,20 @@ ADR-007 and ADR-002.
 
 ### Changed
 
+- **The computers collector no longer accepts `defaultprinter` or `printers`,
+  and can no longer write a printer assignment.** Those keys used to become
+  `defaultprinter`/`connectedto` relationship rows straight from a report, which
+  contradicts the rule the whole printer feature rests on: a collector report is
+  OBSERVED state and never ASSIGNED state, or a bay that installed the wrong
+  printer makes itself right simply by reporting it. It was not a dormant code
+  path - the collector schema advertised both keys and the example client in
+  `docs/COLLECTOR-INTEGRATION.md` set `defaultprinter`, while another page of
+  the same document promised nothing on that path writes an assignment row.
+  **A client still sending them keeps working**: the keys are ignored, not
+  rejected, and the response carries a warning naming them and pointing at
+  `POST /api/collector/printers` for reporting queues and
+  `seed-from-observed` for adopting them. Silently dropping them would have left
+  an integrator believing assignments were still being written.
 - **Tech Tools no longer asks people to sign in for tools that need no
   account.** `/tools`, `/tools/codes` and `/tools/secure-send` were all behind
   `requiresAuth`. The label generator runs entirely in the browser - no API, no

docs/COLLECTOR-INTEGRATION.md

@@ -214,8 +214,6 @@ a column.
 | `modelnumber` | string | `Computer.modelnumberid`, scoped to the vendor when known. Model row auto-created if missing. |
 | `osname` | string | `Computer.osid`. Controlled vocab: looked up in `operatingsystems`, NOT auto-created. Unknown value -> warning (row still written, `osid` left unset). |
 | `installedsoftware` | array of `{name, version}` | `ComputerInstalledApp` rows for applications shopdb already tracks. Unknown app name -> warning, skipped. |
-| `defaultprinter` | string | The default printer's identifier (windows name / share / hostname / port IP). Resolved to a printer asset and linked PC -> printer as a `defaultprinter` relationship. Unresolved -> warning. |
-| `printers` | array of strings | All installed network printer identifiers. Each resolves to a printer asset and is linked PC -> printer as a `connectedto` relationship (the default is skipped here since it already links as `defaultprinter`). Unresolved entries -> warning. |
 
 Schema source of truth: `get_collector_schema` in `plugins/computers/plugin.py`.
 If you change the payload, change it there and re-check this table.
@@ -313,31 +311,20 @@ because several markers serve one operation. Naming the marker in `asset-id.txt`
 changes which marker asset the PC controls; it does not change which operation
 that marker files under.
 
-### PC -> printer relationship sync
+### PC -> printer relationship sync (REMOVED)
 
-When a payload carries `defaultprinter` and/or `printers`, the collector syncs
+**A collector report has never been allowed to set a printer assignment, and as
-`AssetRelationship` rows so a PC page shows its printers and a printer page shows
+of 2026-08-24 it no longer can.** `defaultprinter` and `printers` used to be
-the PCs that use it (both render in the shared Relationships card).
+accepted here and written as `defaultprinter`/`connectedto` relationship rows.
+That contradicted the rule stated under "Observed is not assigned" below, and
+this document carried both claims at once while the code followed the wrong one.
 
-- Resolution: each identifier is matched, first hit wins, against the printer's
+If you are still sending either key: **your push still succeeds** - they are
-  `windowsname`, `hostname`, `sharename`, its asset number/name, then any active
+ignored, and the response carries a warning naming them. Nothing else about your
-  printer communications IP. Case-insensitive except the IP (exact). An
+payload changed. To report what a PC actually has, use
-  identifier that resolves to nothing adds a warning and is skipped; it never
+`POST /api/collector/printers`; to turn that into an assignment, a person calls
-  fails the whole push.
+`POST /api/printers/assignments/seed-from-observed/<assetid>` after reviewing the
-- Link types: the default printer links with `defaultprinter` (directional, PC
+comparison.
-  is the source); every other reported printer links with `connectedto`
-  (symmetric). A printer that is both default and in `printers` links only as
-  the default.
-- Idempotent: re-reporting the same set creates no duplicate rows (an existing
-  matching row is reactivated if it was archived, otherwise left as is).
-- Stale-link archive: on every push, collector-created links to printers no
-  longer reported are set inactive. Collector-created rows are tagged in
-  `assetrelationships.label = 'collector:printers'`; only tagged rows are ever
-  archived, so links you create by hand in the UI are never touched. A payload
-  that omits BOTH printer keys leaves all existing printer links untouched
-  (report an empty `printers: []` to clear the auto links instead).
-- Response: the collector response carries `printerlinkcount` and a
-  `printerlinks` list of `{assetid, relationshiptype}` for the links kept.
 
 ### pc-type mapping (configurable per site)
 
@@ -766,32 +753,15 @@ function Send-ShopdbCollectorReport {
         try { $pcSubType = (Get-Content -LiteralPath 'C:\Enrollment\pc-subtype.txt' -First 1 -ErrorAction Stop).Trim() } catch {}
     }
 
-    # --- Installed printers (Win32_Printer). The Default flag marks the one
+    # --- No printer enumeration here, on purpose. This example used to collect
-    # default printer. We report each printer's port name (an IP or a queue
+    # Win32_Printer and send defaultprinter/printers, which wrote ASSIGNMENT
-    # host for network printers) and fall back to the share/printer name, which
+    # rows from a report - the one thing this path must never do. Report what a
-    # the collector resolves flexibly against printer windowsname/hostname/IP. ---
+    # PC has to POST /api/collector/printers instead (Report-PrintersToShopDB.ps1
-    $defaultPrinter = ''
+    # in the printers plugin does exactly that, and posts NOTHING when the
-    $printerIds     = @()
+    # enumeration fails, because an empty list would erase the host's rows). ---
-    try {
-        $printers = Get-CimInstance -ClassName Win32_Printer -ErrorAction Stop
-        foreach ($p in $printers) {
-            if ($p.Local) { continue }   # skip local-only (XPS/PDF/OneNote)
-            # Prefer the port name (IP or queue host); fall back to ShareName,
-            # then the printer Name.
-            $identity = $p.PortName
-            if (-not $identity) { $identity = $p.ShareName }
-            if (-not $identity) { $identity = $p.Name }
-            if (-not $identity) { continue }
-            $printerIds += $identity
-            if ($p.Default) { $defaultPrinter = $identity }
-        }
-        $printerIds = @($printerIds | Select-Object -Unique)
-    } catch { Write-CollectorLog "WARN printer read failed: $($_.Exception.Message)" }
 
     # --- Build payload. Field names MUST match get_collector_schema exactly. ---
     $payload = @{ hostname = $hostname }
-    if ($defaultPrinter)   { $payload['defaultprinter'] = $defaultPrinter }
-    if ($printerIds.Count) { $payload['printers']       = $printerIds }
     if ($machineNumber) { $payload['machinenumber'] = $machineNumber }
     if ($deviceId)      { $payload['deviceid']      = $deviceId }
     if ($pcType)        { $payload['pctype']        = $pcType }

docs/PROJECT-MAP.md

@@ -36,6 +36,7 @@ with `flask plugin upgrade-all`. Both are needed on a deploy.
 | printedparts | `printedparts0004txnrev` |
 | printers | `printers0005observedqueues` |
 | slides | `slides0001anchor` |
+| tools | `tools0001securesend` |
 | usb | `usb0002dropmachineid` |
 | warranty | `warranty0002proof` |
 
@@ -55,7 +56,7 @@ with `flask plugin upgrade-all`. Both are needed on a deploy.
 | printedparts | 0.1.0 | >=0.16.0,<1.0.0 | yes |
 | printers | 1.0.0 | >=0.20.0,<1.0.0 | yes |
 | slides | 2.0.0 | >=0.2.0,<1.0.0 | yes |
-| tools | 1.0.0 | >=0.16.0,<1.0.0 | no |
+| tools | 1.0.0 | >=0.16.0,<1.0.0 | yes |
 | usb | 1.0.0 | >=0.1.0,<1.0.0 | yes |
 | warranty | 1.0.0 | >=0.2.0,<1.0.0 | yes |
 
@@ -85,6 +86,6 @@ Manifest-less directories under `plugins/` are core frontend surface and always
 
 ## Size
 
-- test functions defined: **1140** (parametrised cases collect higher)
+- test functions defined: **1233** (parametrised cases collect higher)
-- documented API paths: **282** (`docs/openapi.json`, regenerate with `scripts/gen_openapi.py`)
+- documented API paths: **285** (`docs/openapi.json`, regenerate with `scripts/gen_openapi.py`)
 

plugins/computers/plugin.py

@@ -16,16 +16,14 @@ from .api import computers_bp
 
 logger = logging.getLogger(__name__)
 
-# Marker stamped on PC->printer links this collector creates. The stale-link
-# archive only touches rows carrying this label, so manually-created printer
-# relationships are never removed by a collector push. Stored in the
-# assetrelationships.label column (no origin column exists; see BUILD notes).
-PRINTER_LINK_ORIGIN = 'collector:printers'
-
 # Marker stamped on PC->measuringtool "controls" links this collector creates
-# for metrology PCs (CMM, Keyence, Genspect, wax-and-trace). Same stale-link
+# for metrology PCs (CMM, Keyence, Genspect, wax-and-trace). Only rows carrying
-# discipline as PRINTER_LINK_ORIGIN: only rows carrying this label are archived
+# this label are archived by a collector push, so hand-made tool links survive.
-# by a collector push, so hand-made tool links survive.
+# Stored in assetrelationships.label (no origin column exists; see BUILD notes).
+#
+# There is deliberately no printer equivalent any more. PRINTER_LINK_ORIGIN went
+# with _sync_printer_links: printer ASSIGNMENT is never collected, so there are
+# no collector-owned printer rows left to label or archive.
 MEASURINGTOOL_LINK_ORIGIN = 'collector:measuringtool'
 
 # Marker stamped on the PC->machine "controls" link built from the reported
@@ -139,26 +137,10 @@ class ComputersPlugin(BasePlugin):
                     'type': 'array',
                     'items': {'name': 'string', 'version': 'string'},
                 },
-                # Printer identifiers reported by the GE-Enforce side, which
+                # RETIRED: 'defaultprinter' and 'printers' used to live here and
-                # runs Get-CimInstance Win32_Printer and marks the default with
+                # wrote PC->printer assignment rows from a report. That is the
-                # the Default flag. An identifier is the printer's windows name,
+                # one thing this path must never do - see _RETIRED_PRINTER_KEYS.
-                # share name, hostname, or port/IP; the collector resolves it
+                # A client still sending them is warned, not rejected.
-                # flexibly to a printer asset. Both optional. Presence of either
-                # key drives the PC->printer relationship sync (and stale-link
-                # archive); absence leaves existing printer links untouched.
-                'defaultprinter': {
-                    'type': 'string',
-                    'description': ('Default printer identifier (Win32_Printer '
-                                    'with Default=true): windows name, share '
-                                    'name, hostname, or port IP.'),
-                },
-                'printers': {
-                    'type': 'array',
-                    'items': {'type': 'string'},
-                    'description': ('All installed network printer identifiers '
-                                    '(Win32_Printer): windows name / share / '
-                                    'hostname / IP. Unresolved -> warning.'),
-                },
                 'accessprotocols': {
                     'type': 'array',
                     'items': {'type': 'string'},
@@ -423,8 +405,9 @@ class ComputersPlugin(BasePlugin):
         else:
             machinelinks = []
 
-        # Printer relationship sync (only when the payload carried printer data).
+        # Printer assignment is NOT collected. See _warn_retired_printer_keys.
-        printerlinks = self._sync_printer_links(comp.asset, payload, warnings)
+        self._warn_retired_printer_keys(payload, warnings)
+        printerlinks = []
 
         # Measuring-tool sync: metrology PCs (CMM/Keyence/Genspect/wax-trace)
         # get an attached MeasuringTool asset auto-created and linked.
@@ -518,134 +501,38 @@ class ComputersPlugin(BasePlugin):
             AccessProtocol.protocolid.in_(wanted)).all()] if wanted else []
         return sorted(names)
 
-    def _sync_printer_links(self, pcasset, payload, warnings):
+    def _warn_retired_printer_keys(self, payload, warnings):
-        """Idempotently sync PC->printer relationships from collector printer data.
+        """Refuse to turn a report into an assignment, out loud.
 
-        Default printer -> 'defaultprinter' (directional). Other reported
+        RETIRED 2026-08-24. This used to be _sync_printer_links, which wrote
-        printers -> 'connectedto' (symmetric). Resolves each identifier to a
+        'defaultprinter' and 'connectedto' rows straight from a collector
-        printer asset by windows name / share / hostname / asset number / name
+        payload. That contradicted the rule the whole printer feature rests on:
-        or a communications IP. Unresolved identifiers add a warning and never
+        ASSIGNED and OBSERVED never mix. A bay that installed the wrong printer
-        fail the push.
+        would have made itself right simply by reporting it, and enforcement
+        would stop meaning anything.
 
-        Stale-link archive: on each push, collector-tagged links (label ==
+        Worse than dormant, it was ADVERTISED: the collector schema listed both
-        PRINTER_LINK_ORIGIN) whose (target, type) pair is not in the reported
+        keys and COLLECTOR-INTEGRATION.md's example client set defaultprinter,
-        desired set are set inactive. Only tagged rows are touched, so manual
+        while the same document promised on another page that nothing on this
-        links survive. Runs only when the payload carried a printer key
+        path writes an assignment row. The document contradicted itself and the
-        ('defaultprinter' or 'printers'); a PC that reports without printer data
+        code sided with the wrong half.
-        keeps its existing links. Returns the desired-link list (created + kept).
+
+        Observed queues have their own path (POST /api/collector/printers) and
+        become assignments only when a person asks, through
+        seed-from-observed after reviewing the comparison.
+
+        WARNS RATHER THAN REJECTS. Unknown keys are not validated here, so a
+        client written against the old docs keeps pushing successfully; only its
+        printer keys stop doing anything. Silently ignoring them would leave an
+        integrator believing assignments were being written.
         """
-        from shopdb.api import (
+        sent = [key for key in ('defaultprinter', 'printers') if key in payload]
-            AssetRelationship, RelationshipType, Asset, Communication)
+        if sent:
-
+            warnings.append(
-        has_default = 'defaultprinter' in payload
+                '%s ignored: a collector report never sets printer assignment. '
-        has_list = 'printers' in payload
+                'Report queues to POST /api/collector/printers, then adopt them '
-        if not has_default and not has_list:
+                'with POST /api/printers/assignments/seed-from-observed.'
-            return []
+                % ' and '.join(sent))
-
-        try:
-            from plugins.printers.models import Printer
-        except ImportError:
-            warnings.append('printers plugin unavailable; printer links skipped')
-            return []
-
-        dp_type = RelationshipType.query.filter_by(
-            relationshiptype='defaultprinter').first()
-        ct_type = RelationshipType.query.filter_by(
-            relationshiptype='connectedto').first()
-        if not dp_type or not ct_type:
-            warnings.append('printer relationship types missing; '
-                            'run flask seed reference-data')
-            return []
-
-        def resolve(identifier):
-            # first match wins: printer text identity, then a printer IP.
-            ident = (identifier or '').strip()
-            if not ident:
-                return None
-            printer = (
-                Printer.query.join(Asset, Asset.assetid == Printer.assetid)
-                .filter(Asset.isactive == True)
-                .filter(db.or_(
-                    Printer.windowsname.ilike(ident),
-                    Printer.hostname.ilike(ident),
-                    Printer.sharename.ilike(ident),
-                    Asset.assetnumber.ilike(ident),
-                    Asset.name.ilike(ident),
-                )).first())
-            if printer:
-                return printer.asset
-            comm = (
-                db.session.query(Communication)
-                .join(Printer, Printer.assetid == Communication.assetid)
-                .filter(Communication.ipaddress == ident)
-                .first())
-            if comm:
-                return db.session.get(Asset, comm.assetid)
-            return None
-
-        pcid = pcasset.assetid
-        desired = set()      # (targetassetid, relationshiptypeid) to keep
-        printerlinks = []
-
-        default_id = None
-        default_ident = (payload.get('defaultprinter') or '').strip()
-        if default_ident:
-            target = resolve(default_ident)
-            if target:
-                default_id = target.assetid
-                desired.add((default_id, dp_type.relationshiptypeid))
-                self._sync_one(pcid, default_id, dp_type)
-                printerlinks.append({'assetid': default_id,
-                                     'relationshiptype': 'defaultprinter'})
-            else:
-                warnings.append(f'unresolved default printer: {default_ident}')
-
-        for ident in payload.get('printers') or []:
-            target = resolve(ident)
-            if not target:
-                warnings.append(f'unresolved printer: {ident}')
-                continue
-            if target.assetid == default_id:
-                continue  # already the default link
-            desired.add((target.assetid, ct_type.relationshiptypeid))
-            self._sync_one(pcid, target.assetid, ct_type)
-            printerlinks.append({'assetid': target.assetid,
-                                 'relationshiptype': 'connectedto'})
-
-        # Archive collector-tagged links no longer reported (manual links, with
-        # a NULL/other label, are never matched here).
-        collector_rows = AssetRelationship.query.filter(
-            AssetRelationship.sourceassetid == pcid,
-            AssetRelationship.relationshiptypeid.in_(
-                [dp_type.relationshiptypeid, ct_type.relationshiptypeid]),
-            AssetRelationship.isactive == True,
-            AssetRelationship.label == PRINTER_LINK_ORIGIN,
-        ).all()
-        for rel in collector_rows:
-            if (rel.targetassetid, rel.relationshiptypeid) not in desired:
-                rel.isactive = False
-
-        return printerlinks
-
-    def _sync_one(self, pcid, printerid, reltype):
-        """Reactivate or create one collector PC->printer link (idempotent)."""
-        from shopdb.api import AssetRelationship
-        existing = AssetRelationship.query.filter_by(
-            sourceassetid=pcid, targetassetid=printerid,
-            relationshiptypeid=reltype.relationshiptypeid).first()
-        if existing:
-            # do not re-stamp label: a pre-existing manual row stays manual.
-            if not existing.isactive:
-                existing.isactive = True
-            return existing
-        rel = AssetRelationship(
-            sourceassetid=pcid, targetassetid=printerid,
-            relationshiptypeid=reltype.relationshiptypeid,
-            label=PRINTER_LINK_ORIGIN)
-        db.session.add(rel)
-        return rel
-
-    # -- measuring-tool sync -----------------------------------------------
 
     def _sync_machine_link(self, comp, machinenumber, warnings):
         """Link a PC to the machine it drives, from the reported machine number.

tests/test_core/test_collector_printers.py

@@ -1,11 +1,19 @@
-"""Tests for the computers collector PC->printer relationship sync.
+"""The computers collector must NEVER write a printer assignment.
 
-A collector payload carrying defaultprinter/printers creates AssetRelationship
+This file used to pin the opposite: `_sync_printer_links` turned a payload's
-rows linking the PC asset to the resolved printer assets ('defaultprinter' for
+`defaultprinter`/`printers` into AssetRelationship rows. That contradicted the
-the default, 'connectedto' for the rest). Stale collector links archive on
+rule the printer feature rests on - ASSIGNED and OBSERVED never mix - because a
-re-report; manual links survive; unresolved identifiers warn without failing.
+bay that installed the wrong printer would have made itself right just by
+reporting it.
+
+It was not dormant. The collector schema advertised both keys and
+COLLECTOR-INTEGRATION.md's example client set `defaultprinter`, while another
+page of the same document promised nothing on this path writes an assignment
+row. Retired 2026-08-24; these tests are the guard that it stays retired.
+
+Observed queues have their own path (POST /api/collector/printers) and become
+assignments only when a person asks, via seed-from-observed.
 """
-
 import pytest
 
 from shopdb.core.models import (
@@ -81,119 +89,75 @@ def _active_links(db, pcid):
         sourceassetid=pcid, isactive=True).all()
 
 
-def test_creates_default_and_connected_links(client, db, collector_key, scene):
+def test_printer_keys_create_no_relationships(client, db, collector_key, scene):
-    """Default -> defaultprinter, others -> connectedto, resolved by three id forms."""
+    """The reported case, inverted: sending them must change nothing."""
-    resp = _post(client, {
+    response = _post(client, {
-        'hostname': 'WJPC-P1',
+        'hostname': 'BAY-3105-PC',
-        'defaultprinter': 'HP-Materials',          # windowsname
-        'printers': ['prn-front.wjs.local', '10.1.2.3'],  # hostname, IP
-    })
-    assert resp.status_code == 200, resp.get_json()
-    data = resp.get_json()['data']
-    assert data['printerlinkcount'] == 3
-    assert not data['warnings']
-
-    pc = _pc_asset(db)
-    links = {(r.targetassetid, r.relationshiptype.relationshiptype)
-             for r in _active_links(db, pc.assetid)}
-    assert (scene['a'].assetid, 'defaultprinter') in links
-    assert (scene['b'].assetid, 'connectedto') in links
-    assert (scene['c'].assetid, 'connectedto') in links
-
-
-def test_unresolved_identifier_warns_not_fails(client, db, collector_key, scene):
-    """An unknown printer identifier is a warning, the rest still link."""
-    resp = _post(client, {
-        'hostname': 'WJPC-P2',
         'defaultprinter': 'HP-Materials',
-        'printers': ['does-not-exist'],
+        'printers': ['HP-Materials', 'prn-front.wjs.local', '10.1.2.3'],
     })
-    assert resp.status_code == 200
+    assert response.status_code in (200, 201), response.get_json()
-    data = resp.get_json()['data']
+
-    assert any('unresolved printer: does-not-exist' in w
+    pcid = _pc_asset(db).assetid
-               for w in data['warnings'])
+    assert _active_links(db, pcid) == [], (
-    pc = _pc_asset(db)
+        'a collector report wrote printer relationships')
-    assert data['printerlinkcount'] == 1
-    assert len(_active_links(db, pc.assetid)) == 1
 
 
-def test_idempotent_no_duplicates(client, db, collector_key, scene):
+def test_the_push_still_succeeds_and_says_why(client, db, collector_key, scene):
-    """Re-report the same set: no new rows, still one link per printer."""
+    """Warn, do not reject.
-    payload = {'hostname': 'WJPC-P3', 'defaultprinter': 'HP-Materials',
-               'printers': ['Zebra-Ship']}
-    assert _post(client, payload).status_code == 200
-    assert _post(client, payload).status_code == 200
 
-    pc = _pc_asset(db)
+    Unknown keys are not validated, so a client written against the old docs
-    all_rows = AssetRelationship.query.filter_by(sourceassetid=pc.assetid).all()
+    keeps pushing successfully - only its printer keys stop doing anything.
-    assert len(all_rows) == 2  # one default + one connected, no dupes
+    Silently dropping them would leave an integrator believing assignments were
-    assert all(r.isactive for r in all_rows)
+    still being written, which is worse than the original bug.
+    """
+    response = _post(client, {
+        'hostname': 'BAY-3105-PC',
+        'defaultprinter': 'HP-Materials',
+    })
+    assert response.status_code in (200, 201)
+    warnings = ' '.join(response.get_json()['data']['warnings']).lower()
+    assert 'defaultprinter' in warnings
+    assert 'seed-from-observed' in warnings, (
+        'the warning should say where assignment actually comes from')
 
 
-def test_dropped_printer_is_archived(client, db, collector_key, scene):
+def test_a_payload_without_printer_keys_warns_about_nothing(
-    """A printer that stops being reported loses its collector link."""
+        client, db, collector_key, scene):
-    _post(client, {'hostname': 'WJPC-P4', 'defaultprinter': 'HP-Materials',
+    """The normal case must stay quiet - this is every push in the fleet."""
-                   'printers': ['Zebra-Ship']})
+    response = _post(client, {'hostname': 'BAY-3105-PC'})
-    pc = _pc_asset(db)
+    assert response.status_code in (200, 201)
-    assert len(_active_links(db, pc.assetid)) == 2
+    warnings = ' '.join(response.get_json()['data']['warnings']).lower()
-
+    assert 'printer' not in warnings
-    # Re-report without Zebra-Ship.
-    _post(client, {'hostname': 'WJPC-P4', 'defaultprinter': 'HP-Materials',
-                   'printers': []})
-    active = _active_links(db, pc.assetid)
-    assert len(active) == 1
-    assert active[0].targetassetid == scene['a'].assetid
-    # the dropped row still exists but is inactive
-    zebra = AssetRelationship.query.filter_by(
-        sourceassetid=pc.assetid, targetassetid=scene['c'].assetid).first()
-    assert zebra is not None and zebra.isactive is False
 
 
-def test_default_change_archives_old_default(client, db, collector_key, scene):
+def test_a_manual_assignment_survives_a_report_that_names_printers(
-    """Changing the default printer archives the previous defaultprinter link."""
+        client, db, collector_key, scene):
-    _post(client, {'hostname': 'WJPC-P5', 'defaultprinter': 'HP-Materials'})
+    """The row a person made is the one that matters, and it stays untouched."""
-    pc = _pc_asset(db)
+    _post(client, {'hostname': 'BAY-3105-PC'})
-    _post(client, {'hostname': 'WJPC-P5', 'defaultprinter': 'prn-front.wjs.local'})
+    pcasset = _pc_asset(db)
-
-    active = _active_links(db, pc.assetid)
-    assert len(active) == 1
-    assert active[0].targetassetid == scene['b'].assetid
-    assert active[0].relationshiptype.relationshiptype == 'defaultprinter'
-
-
-def test_manual_link_survives_collector_sync(client, db, collector_key, scene):
-    """A manually-created link (no collector label) is never archived."""
-    # PC created first via a bare report.
-    _post(client, {'hostname': 'WJPC-P6', 'defaultprinter': 'HP-Materials',
-                   'printers': ['Zebra-Ship']})
-    pc = _pc_asset(db)
-
-    # Manual connectedto link PC -> printer B (label stays NULL).
     manual = AssetRelationship(
-        sourceassetid=pc.assetid, targetassetid=scene['b'].assetid,
+        sourceassetid=pcasset.assetid, targetassetid=scene['a'].assetid,
-        relationshiptypeid=scene['ct_type'].relationshiptypeid, notes='by hand')
+        relationshiptypeid=scene['dp_type'].relationshiptypeid)
     db.session.add(manual)
     db.session.commit()
-    manual_id = manual.relationshipid
 
-    # Re-report dropping Zebra-Ship and never mentioning printer B.
+    _post(client, {
-    _post(client, {'hostname': 'WJPC-P6', 'defaultprinter': 'HP-Materials',
+        'hostname': 'BAY-3105-PC',
-                   'printers': []})
+        'defaultprinter': 'prn-front.wjs.local',   # a DIFFERENT printer
+        'printers': ['prn-front.wjs.local'],
+    })
 
-    surviving = db.session.get(AssetRelationship, manual_id)
+    links = _active_links(db, pcasset.assetid)
-    assert surviving.isactive is True   # manual link untouched
+    assert len(links) == 1
-    # Zebra (collector) archived.
+    assert links[0].targetassetid == scene['a'].assetid, (
-    zebra = AssetRelationship.query.filter_by(
+        'the report retargeted a human-made default printer')
-        sourceassetid=pc.assetid, targetassetid=scene['c'].assetid).first()
-    assert zebra.isactive is False
 
 
-def test_no_printer_keys_leaves_links_untouched(client, db, collector_key, scene):
+def test_the_retired_keys_are_gone_from_the_collector_schema(app):
-    """A report with no printer keys does not archive existing links."""
+    """The schema advertised them, which is how integrators found them."""
-    _post(client, {'hostname': 'WJPC-P7', 'defaultprinter': 'HP-Materials'})
+    from plugins.computers.plugin import ComputersPlugin
-    pc = _pc_asset(db)
-    assert len(_active_links(db, pc.assetid)) == 1
 
-    # A plain update (no defaultprinter, no printers key) must not archive.
+    fields = ComputersPlugin().get_collector_schema()['fields']
-    _post(client, {'hostname': 'WJPC-P7', 'currentuser': 'alice'})
+    assert 'defaultprinter' not in fields
-    assert len(_active_links(db, pc.assetid)) == 1
+    assert 'printers' not in fields