0c0c7be439ea756258b48bbdbbd6b20247d9e0c0
5 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
cproudlock
|
d60ed602a1 |
Stop three ways the collector and the forms wrote things nobody asked for
A review of last week's device-identity work found these; two were writing bad data and one was reproduced against a live server before being fixed. AN UPDATE COULD BLANK AN ASSET NUMBER, on all six asset update paths. Create validates it and the column is NOT NULL, but the conflict check only runs when the value DIFFERS, and '' collides with nothing - so an empty assetnumber went straight through to a required column. This is the likely source of the assets found with no number: a form that loaded blank and was then saved. MACHINEFORM COULD LOAD BLANK AND LET YOU SAVE IT. One try/catch wrapped eight reference loads AND the machine fetch, so a single transient failure among them - one page of listAll() timing out during a collector cycle is enough - rejected the whole block and rendered a fully editable EDIT form with every field empty, the error banner far below next to Save. Typing an asset number and saving then wrote the blanks over a real machine. The record now loads in its own try, and a failure shows the reason INSTEAD of the form: an empty edit form is indistinguishable from a record whose fields are genuinely empty. NAMING A DEVICE THAT DID NOT RESOLVE STILL MINTED A TWIN. Both device paths warned "not linked" and then fell through to mint <HOST>-PARTMARKER or <HOST>-CMM - the hostname-derived twin the resolution order exists to prevent. The warning was true about the typo'd number and false about the twin. Naming a device is a commitment: if the name does not resolve, or resolves to the wrong kind of thing, link nothing and say so. Silence still means "work it out", so a bay with no file keeps the reuse-then-mint behaviour it always had. TWO PCS COULD BOTH HOLD ONE DEVICE, ACTIVELY, WITH NO WARNING. Verified against a live server: report as one host, then as another naming the same marker, and both controls rows stayed active. Neither device path had ever looked at who else held the target - only at links whose source was THIS PC - so a replaced PC kept its link forever and an asset-id.txt copied to a second bay claimed the device silently. It now reuses the machine link's rule rather than inventing a second one: an incumbent that has gone quiet past the claim window or been moved off In Use has yielded and is archived, never deleted; a live incumbent keeps the device and the challenger is recorded dormant. The swap test asserted the old behaviour and now asserts the new one, split in two: a live incumbent keeps it, and handover completes once the incumbent yields. Two other tests were passing while their names lied - the unknown-device one checked only that the typo'd asset was not created, not that nothing was linked, and it passed while a twin was minted beside it. |
||
|
cproudlock
|
e2c45d33bc |
One printer picker for machines and PCs, and one default per asset
The assignment belongs to the MACHINE, and until now there was no way to set it except the generic relationships card or the API - the form for the thing the feature is about did not exist. MachineForm now carries the picker, and PCForm uses the SAME component rather than its own copy: the PC's set overrides the machine's, and two implementations of that would drift, with the two ends of an override disagreeing being exactly the bug nobody would spot. The shared picker also fixes what PCForm did on save. It wrote row at a time through the generic relationship endpoints, which is a non-atomic reconcile: an HTTP failure part way left a PC half-assigned with nothing recording what was meant. It now calls the reconcile endpoint, which validates the default before writing anything. A relationship type can now say it allows one active row per asset (relationshiptypes.issingular, migration 7d34), and defaultprinter says it. Cardinality belongs to the type rather than the printers plugin: core's create path is where every hand-made link passes, and the next type meaning "exactly one" gets the rule for free. Setting a second default REPLACES the first instead of refusing, because "make this the default" means that - and a card answering 409 would leave the user hunting for the old row. Without it the schema was happy to hold two defaults: the unique constraint is (source, target, type), so two different targets are two valid rows, and the resolver takes the OLDEST - the new default silently lost. Proven by disabling the new rule and watching the tests fail. FOUND WHILE TESTING IN A BROWSER, and it was not mine: MachineForm read .data.data off computersApi.listAll(), which resolves to the ARRAY - fetchAllPages has already unwrapped every page. The whole parallel load threw into the catch, so every dropdown on the machine edit form came up empty and the machine's own values never loaded. A build cannot see this; only opening the page can. GET /api/printers/assignments/for-asset/<id> returns an asset's OWN assignment, without inheritance, because the editor must show what this asset's rows say - otherwise a machine's printers appear ticked on the PC that inherits them and unticking one silently creates an override. |
||
|
cproudlock
|
62f4a42210 |
fix: page past the 100-row cap in batch label sheets and asset pickers
Follow-up to the application-picker fix. Three of these were already wrong on data that exists today, not merely latent. Batch label printing is the worst of them: AssetLabelBatch asked for 500 machines or PCs, got 100, and printed a sheet that looked complete. With 262 machines and 290 PCs in the catalogue that is a physically short run with no error anywhere - the operator finds out at the label printer, or later at the bay with no label on it. PrinterQRBatch, USBLabelBatch and PrintedPartsLabels had the same shape and are fixed alongside it, before their tables cross 100 too. MachineForm's "controls" PC dropdown offered the first 100 of 290, so a machine could not be linked to a PC sorting late in the list. NetworkDeviceForm had it for models, which are already past 100 - and the same file already called modelsApi.listAll() correctly two lines away. Adds listAll() to the machines, computers, printers, network, measuring-tools, USB and printed-parts APIs, all delegating to fetchAllPages(). Still outstanding: callers of vendors, locations, business units and the type catalogues that ask for more than 100. Those tables are all well under the cap today, so they are correct for now and wrong the day they are not. |
||
|
cproudlock
|
3324dbd91e |
Buildings and levels for the floor map, and make every identifier searchable
The map was one picture of one floor. A second floor was added, the blueprint changed size, and machines moved, so a position now records WHICH DRAWING its coordinates belong to. Buildings and levels (ADR-017). Each level owns its blueprint per theme and its own native pixel size; assets.mapx/mapy are pixels of assets.levelid, not of the site. A position whose level is unknown renders "level unknown" and is never drawn on the default level, because a marker on the wrong floor plan looks entirely correct while pointing at the wrong place. Repositioning in bulk: filter by unplaced, needs-review or level, search, place, confirm. Landmark recalibration solves the transform PER AXIS from landmark pairs and never from image dimensions - the canvas grew taller without rescaling, so a dimension-derived scale would stretch Y by 1.57 and be wrong everywhere. It defaults to a dry run, reports what would land off the drawing, snapshots before applying, and clears mapverifiedat because a transform is a guess awaiting review. Snapshots restore, including the level and the review state, and a restore snapshots first so an undo is undoable. Search: gaugelabreference was matched only for measuring tools and maintenancereference was matched nowhere at all, for any asset type, while Settings happily offers both identifiers on machines and PCs. A tag an operator is told to record has to be findable or it is a write-only field. USB devices and printed items were unreachable from search entirely - neither is an asset, so the generic asset search could not see them and no searcher existed; they now match on serial, asset tag, label, bin code and gage-lab tag, honouring isactive, with Settings toggles and result labels to match. The retired-application rule was half a rule: GET /api/knowledgebase hid articles whose topic application is retired while global search still returned them and printed the retired application as the subject. A filter is only real if every path that reaches the row applies it. Contract to 0.20.0 (additive): Asset gained levelid and mapverifiedat, Location gained levelid, and resolve_asset_position returns the levelid belonging to whichever source supplied the coordinates. The five plugins that write a map position are re-pinned. The install-list text format gained levelid as a NINTH field, appended, because the shipped Pascal installer reads fields 0-7 by index. That installer still compiles in one drawing's dimensions and bundles one blueprint, so its map is accurate for the default level only; /api/maplevels is deliberately unauthenticated so it can read both at runtime once rebuilt. Recorded in PRINTER-INSTALLER.md section 6 along with the other known gaps. Migration 7d33 converts an existing single-map site into one building and one default level carrying the old map_* settings, then assigns every placed asset and location to it. Nothing moves on screen. Old settings rows are kept so a rollback still finds them. Verified end to end on MySQL 5.6 from a production-shaped database. |
||
|
cproudlock
|
23dc9fa379 |
ADR-013 Phase 4: relocate 4 self-contained plugin frontends
Relocate applications, geenforce, knowledgebase, and machines - each owns only its own views dir, so a clean move to plugins/<name>/frontend/ (views/ + routes.js, core imports rewritten to @/). geenforce's entryForm.js helper + its vitest spec move with it (ManifestEditor imports it as a sibling). Machinery fixes this batch surfaced: - routes.gen.js codegen uses namespace imports (import * as p_x). A route file without a `toplevel` export is undefined on the namespace instead of a strict- ESM missing-binding build error. - vitest gains a `pretest` stage so plugin-frontend specs (now under plugins/<name>/frontend/) run from their staged copy in src/.plugins-staged/. Verified live: GE-Enforce (the most complex, uses the entryForm sibling helper) renders fully from its staged frontend. Build + 58 vitest + naming green. |