Core called the roles dashboard / lobby / partskiosk. The kiosks call them
Dashboard / Lobby / 3DPrintRoom, which are the literal contents of
C:\Enrollment\display-type.txt, read by the GE-Enforce dispatcher to pick a
target. Two vocabularies for three kiosks, each with its own copy of the same
route map.
That is not cosmetic. A display reporting its own type sends what its file
says, so it could report a role core would not accept, and core could store
'partskiosk', a value no dispatcher would ever match. The enforcement report
column would have shown one vocabulary from the device and the other from the
DashboardDefault fallback, in the same column.
The machine's file wins, because that is what a person edits. DISPLAY_ROLE_PATHS
takes the kiosk spelling and the display scope now uses that dict rather than
holding a second one, so the two cannot drift again. normalize_display_role
resolves any casing and the retired 'partskiosk' forward; the dispatcher already
matched its map case-insensitively and the server now agrees with it.
Nothing is turned away over a capital: the API accepts any spelling and stores
the canonical one, displaypath resolves through the normalizer so rows written
before this keep working, and the settings dropdown canonicalises on open so an
old value does not render as a blank select.
A reported subtype is normalised on the way in, but an UNRECOGNISED one is kept
verbatim. That is a kiosk with a typo in its file or a role nobody declared, and
both are worth seeing in the fleet table rather than blanked or guessed at.
Contract bumped for the added names. DashboardDefault is finally listed in
__all__ too - 0.17.0 put it on the surface and never exported it.
Adding an application meant typing an image FILENAME and trusting someone had
dropped the file into the frontend's own directory by hand, and typing an
install path from memory. Both are uploads now, following the model-image trio
that models and part photos already use.
The two differ deliberately. The image is public, because application tiles
render before anything is authenticated. The installer is not: it is licensed
vendor software, an open URL would publish it to anything that can reach the
site, and it is always sent as an attachment rather than rendered.
Installers are capped at 500MB and the size is measured by seeking the stream
rather than trusting Content-Length, which a chunked upload does not send and a
client can understate. Anything larger belongs on the share, and the error says
so rather than just refusing.
Files are chosen before a new application exists, so they are held and uploaded
once there is an id to attach them to. A failed upload leaves the saved record
alone and reports, rather than losing what saved fine.
Removing an installer only clears installpath when it pointed at the upload - a
share path was typed by a person and is not ours to wipe. The detail page reads
both shapes, since entries from the classic site hold a bare filename that is
still served from /images/applications/.
Four fixes, all from looking at the real board.
"and N more" now links to a page showing them all. Telling someone 35 more PCs
are silent and leaving them to find the list is worse than not saying it. Each
card names its own destination and a test checks it against the routes that
actually exist - a viewall pointing at a route nobody wrote is the same rot the
endpoint check already guards, just failing in the browser instead of the API.
PRINTER ROWS ESCAPED THE CARD. A flex child will not shrink below its content
width unless told to, so text-overflow never engaged and a row carrying three
cartridge readings plus a location simply ran past the border. min-width:0 on
the row parts is what enables the ellipsis; meta shrinks first because it
matters least, and the card clips as a backstop.
THE STAT TILES WERE INCOHERENT. Two counted asset TYPES, two counted asset
STATUSES, and nothing said which - with the status one labelled "Active", which
reads as "not deleted" but meant status = In Use across every type. Each tile
now counts one thing and its label says so.
PCs GONE SILENT IS NARROWER, and better for it. A PC that never reported at all
is usually a hand-made or imported record rather than a bay that broke, and a
PC that is not In Use is silent ON PURPOSE - that is the status doing its job.
Both were burying the real signal: a machine that was working, is not now, and
nobody has marked as anything else.
Three plugins still declared widgets naming Vue components nobody wrote.
Converting them honestly meant three different answers, not one.
notifications gets a real card: the active notifications themselves, not a
count. "4 active" tells an admin nothing; knowing WHICH message the shop is
looking at is the point, and it is how a stale one gets noticed and taken down.
machines gets machines out of service - anything not In Use, excluding
Inventory, because a spare on a shelf is stock rather than a problem. Someone is
supposed to be chasing each of those and today they are visible only to whoever
thinks to filter the list by status.
network gets NOTHING, and its declaration is deleted rather than converted.
Network devices carry no live status - no polling, no reachability check,
nothing that can be wrong - so the only possible card is a count of how many
exist, which is precisely the always-true number this dashboard exists to get
away from. A comment records that, so the next person does not re-add it. If
reachability is ever collected, that is the card.
Also adds a contract test over every declared card: no component names, a valid
renderer and severity, and - the one that matters - the endpoint must be a REAL
route. A declaration pointing at a route nobody wrote is exactly how the old
widgets rotted unnoticed for months, and now it fails the build instead.
A PC that drives a device which is its own asset had been implemented twice.
METROLOGY_TOOL_MAP covered CMM, Keyence, Genspect and wax-trace, minting a
measuring_tool. A separate path keyed on one hardcoded pc-type minted a Part
Marker machine and filed it under its operation. Both create a device, link the
PC with controls, and archive that link when the PC is re-imaged: one mechanism
with different nouns, written out twice because the second case arrived later.
That is the same trap as the site literals in ADR-015 - a pattern implemented
per instance rather than declared - and it has a known next occurrence. Part
markers already share operation numbers, and any site with two marking lasers
or two wax-trace units on one number needs identical treatment.
One SUBORDINATE_DEVICE_MAP now declares asset type, type name, naming suffix,
whether the device files partof the operation, and the relationship label. The
labels are unchanged per case on purpose: those values are in the production
database and only rows carrying them are archived by a collector push. A site
overrides or adds an entry through subordinatedevice_<pctype> settings, per
ADR-015, so the next case needs no code. A malformed override falls back to the
default rather than failing the push, because a bad setting must not stop a bay
reporting its inventory.
metrology_tool_for stays as a shim over the same map: filters.py and the older
tests read it, and unifying must not change what it returns. A test pins that.
Also adds flask relationships check-shared-machines, which finds the next 0615
rather than waiting for someone to notice duplicate backups. Several devices
legitimately sharing a number and two PCs mis-numbered at imaging look the same
from outside; the difference is whether child assets exist, so that is what it
reports. Read-only.
A PC first seen before the machine-number fix was created with the machine
number as its OWN asset number, and the fix deliberately does not overwrite an
existing PC's asset number. So resolving the reported number can return the
reporting PC itself, and the marker was then filed partof its own PC - which
reads, on the machine page, as the PC being the operation.
The machine-link path already guarded this case; the marker path did not. It
now refuses and says why, naming the repair: rename the PC asset to its
hostname, or create the operation asset.
Several Telesis markers serve one operation number - 0613, 0615 and WJPRT each
have more than one - so treating the operation as the marker collapsed separate
devices into a single record. Their configurations differ by COM port, so in
the backup history they overwrote each other, and no question about an
individual marker could be asked at all: how many there are, which port one is
on, which one failed.
There is one marker per PC, which makes the PC the marker's identity, so the
collector can mint the marker the same way it already mints a CMM or a Keyence
unit for a metrology PC. A marker PC now gets a Part Marker machine asset, the
PC controls it, and the marker is partof the operation whose number the PC
reports. An operation holds any number of markers.
A marker PC therefore does not claim the operation directly. controls
propagates through partof, which reference-data already seeds, so control of
the operation still follows from controlling its marker - without two markers
contesting a link only one of them can hold.
Backups from a marker PC resolve to the marker rather than the operation, and
fall back to the machine number whenever the marker cannot be resolved: no
hostname on the payload, a lean build without the computers or machines plugin,
or a marker PC that has not reported to the computers collector yet. Filing
under the operation is the old behaviour and beats rejecting a backup.
Moving a marker to another operation archives the old membership rather than
deleting it, so where a marker used to live stays answerable.
Treating "another PC is linked to this machine" as proof of replacement was
wrong. A PC imaged for machine 3010 carries that number from the bench, before
it has replaced anything, and several PCs sharing one machine number is a
normal state at this site: the part markers do it. Both PCs then reported on
their own schedules, each report moved the link and raised an alert, and the
pair traded the machine back and forth for as long as both were alive.
The PC holding a machine now keeps it while it is still alive. Alive means it
has reported within MACHINE_CLAIM_QUIET_HOURS and its asset is still In Use. A
challenger is recorded as a dormant link instead, which doubles as the marker
saying the claim has already been announced, so a PC sitting on a bench does
not alert on every collector cycle.
The handover still happens on its own once the old PC has been quiet for a day,
which is what a PC pulled off a machine does. Moving the old PC off In Use -
Retired, Inventory, In Repair - hands the machine over on the next report,
which gives IT a one-step way to force a swap the moment it happens rather than
waiting out the window. A day is long enough that a PC switched off overnight,
or one behind a network outage, never loses its bay to a spare.
Alerts for both cases are gated on a new computers_machinelink_alerts setting
and ship OFF. Several part markers legitimately share a machine number here, so
the alerts would fire on correct data. Links, warnings in the collector
response, and archived history are unaffected; only the sending is gated.
Also: the alert goes through send_alert rather than resolving recipients by
hand, which had missed the SMTP_ALERT_RECIPIENTS environment fallback, so a
site configuring SMTP by environment would have got the webhook and no email.
A bay reporting machinenumber 3015 got a 500 from the collector every five
minutes since it was imaged, and would have forever: the reported number was
written to the PC's own assets.assetnumber, which is uniquely indexed and
already held by machine 3015, so the insert failed with "Duplicate entry '3015'
for key 'ix_assets_assetnumber'" and the entire report was discarded. Operating
system, boot time, applications, printers and access protocols never landed.
Every retry did the same thing, so there was no path out of it.
A new PC now takes its hostname as its asset number, which is what the data
already shows: of 289 computers none has a numeric asset number and 214 use
their hostname. An existing PC's asset number is left alone; overwriting it
renamed the PC onto the machine's identifier, changing how that PC is
identified everywhere else.
The machine number instead does what it was collected for. It resolves the
machine and links the PC to it with a 'controls' relationship carrying a
collector:machine origin label, the same discipline the printer and
measuring-tool links use, so a link made by hand is never archived by a
collector push. Reporting a different machine archives this PC's previous link;
a machine ShopDB does not know is reported as a warning rather than invented.
When another PC was already linked to that machine it has been replaced. The
old link is archived rather than deleted, so which PC ran a machine in a given
month remains answerable, and an alert goes out by email and webhook. The
retired PC's status is deliberately not changed: the collector cannot tell
whether it was shelved, sent for repair or re-imaged for another bay, and
guessing would overwrite what a person set.
The accessprotocols / computeraccess tables replaced the old isvnc/iswinrm
booleans and the PC page already badges what a machine exposes, but nothing
kept them current: the 574 rows in place all came from the legacy migration and
have not moved since. The collector schema had no field for them.
Adds 'accessprotocols', a list of catalog names, synced with the same
discipline as the printer links. A reported protocol is activated; a
catalogued one the PC did NOT report is deactivated rather than deleted, so a
manual portoverride survives a service being briefly down. An unknown name
warns and is skipped: the catalog is admin-managed, and a typo on one bay must
not invent a protocol for the whole site.
Presence of the key is what drives the sync. A payload without it leaves every
existing row untouched, which is what protects the migrated rows from a
collector that does not report protocols yet.
Six tests cover recording, case-insensitive matching, deactivation on removal,
the omitted-key no-op, an explicit empty list meaning "exposes nothing", and
that an unknown name never creates a protocol.
Three defects, all found on printedparts_label_prefix, all one root cause:
nothing in the framework knew that setting existed.
The parts kiosk runs logged out. An unauthenticated read of a setting is
limited to an allowlist, the key was not on it, so the kiosk got a 404 and
fell back to no prefix. An admin previewing the same page while logged in saw
the prefix, which is why it looked like it worked.
The same setting also looked like it would not save. The row did not exist on
a site that installed the plugin before the setting was added, so the first
save created it - under the placeholder category the settings API uses for
keys it does not recognise, where the plugin's settings page, which lists by
category, could no longer see it. The value was in the database the whole
time.
And the row was missing in the first place because seeding ran from
on_install / on_enable, which fire only on a state transition. Neither runs
again on an upgrade, so a setting added in a later plugin version never
reached a site that installed an earlier one. The comment claiming enable ran
every upgrade cycle was simply wrong.
A plugin now declares the settings it owns in get_settings_defaults(): key,
default, type, category, description, and whether a logged-out page may read
it. The framework seeds declared keys at install, at enable, and on every
flask plugin upgrade-all; files a first-time write under the declared
category; re-homes any row left in the placeholder category, value untouched;
and answers an anonymous read for keys marked public. Core carries no list of
any plugin's keys.
Contract 0.16.0 (additive optional hook). printedparts and printers move to
the hook and floor their core_version at 0.16.0. The dev database had two rows
in the misfiled state (printedparts_alert_email, employee_db_host); the first
repairs itself on the next upgrade pass.
Prod had 331 relationships, 268 computers, 204 machines, but the report came
back empty. The query only matched computer(source) -> machine(target), while
the import stores the general machinerelationships as machine(source) ->
PC(target) (only the synthetic measuring-tool links are PC -> tool). So the real
shop-floor edges never matched.
Make the query direction-agnostic (UNION of both orientations); a PC-runs-machine
report is conceptually undirected. Also drop the comtypeid=1 filter so the IP is
taken from the primary communication regardless of its type.
Test: a machine(source) -> PC(target) edge now appears in the report.
IIS ARR sets X-Forwarded-For to clientip:port, and the port changes every
connection. Left in, the audit log showed IP:PORT, the dashboard IP fallback
never matched a stored (portless) DashboardDefault.ipaddress, and login rate
limiting keyed per-connection instead of per-host. Add an IPv6-safe
clientip.client_ip / strip_port helper and use it in the audit log, the
dashboard resolver, and the login rate-limit key.
The KB list search matched only shortdescription + keywords, so searching a
topic (e.g. "Spotfire", the Application name) surfaced just the one article
whose title/keywords contained the word, not the others tied to it by topic.
Match the topic too via an appid IN (apps named like the term) subquery - used
instead of a join so it does not collide with the sort=topic join, and articles
with no app still match on title/keywords.
The lobby-display and screensaver slide manager was admin-only. Add a shared
slides.manage permission so a curator can manage both surfaces without full
admin. Admins keep access via the require_permission admin bypass.
Backend:
- plugins/slides/api/routes.py: all 5 management routes require slides.manage
- plugins/slides/plugin.py: declare it via get_permissions(); nav item carries
the permission so the frontend can gate visibility
- shopdb/core/api/auth.py: login response now returns the user's permissions
(matches /me) so the frontend authStore has them on fresh login
Frontend:
- stores/auth.js: hasPermission(name) getter (admin true, else granted list)
- router/index.js: guard supports requiresPermission
- views/AppLayout.vue: hide nav items whose permission the user lacks
- plugins/slides/frontend/routes.js: slide manager gated requiresPermission
Tests: no-perm user 403, curator role with the perm 200 (+ login advertises
it), admin 200 via bypass.
Deploy: run `flask seed permissions` to create the row, then grant it to a
role in Settings > Users & Roles.
Global search did a single ilike('%CSF Roles%'), so any query with more than one
word required the exact contiguous phrase and usually returned nothing. Add
_word_match: split the query into words and AND them (OR across the searched
columns per word), so 'CSF Roles' matches a record with both words in any field,
any order. Applied across every domain (assets, applications, KB, employees
[selfhosted + external HR], notifications, hostnames, IP, custom fields,
vendor/model/type). External HR path uses a parameterized per-word LIKE.
Adds GET /api/computers/display-kiosks - the displays that reported in (Kiosk
type), each with its derived FQDN (F<serial>.<domain>). The Dashboard Defaults
form gets a kiosk dropdown that fills the FQDN so admins pick a display instead
of typing an IP; IP stays an optional manual field. Table shows FQDN or IP.
'Business Unit' label -> 'Location' on this page + the settings nav.
A display's DHCP IP can change; its FQDN (F<serial>.<domain>, domain from the
display_fqdn_domain setting) is stable and the collector already reports the
serial. Add a nullable unique fqdn column (varchar191 so the index fits utf8mb4
without innodb_large_prefix), make ipaddress nullable, and require fqdn OR ip.
visitor-location + display-role resolve by FQDN first, then IP; create/update
accept fqdn. Core migration 7d31, verified up/down/idempotent on MySQL 5.6.
'Business unit' wording -> 'location' in the validation messages.
send_webhook(title,text) posts alerts to an optional webhook (Teams Incoming
Webhook / Workflow, or generic JSON) via alert_webhook_url + alert_webhook_format
settings; send_alert fans out to it alongside email; exposed on shopdb.api
(0.13.0->0.14.0, PLUGIN-HOOKS synced); low-stock posts on its custom-recipient
path too. Also: recent-transactions table shows the consumed print-file revision.
One 'display' image resolves what it shows from its own IP, like the existing
visitor-location BU mapping. Extend DashboardDefault with displayrole
(dashboard|lobby|partskiosk; migration 7d28, businessunitid now nullable since
only the dashboard role needs one) + a role->path map. New unauthenticated
GET /api/dashboarddefaults/display-role returns {role, path, businessunitid}
for the caller IP. Settings UI gains a Display selector, showing the business
unit only for the dashboard role.
Role badges rendered gray for everything except admin, with no way to tell
roles apart. Add an optional color per role, matching how statuses and types
carry one: new roles.color column (migration 7d27_roles_color), color threaded
through the role API and the user serializer, and a ColorSwatchPicker in the
role editor. Badges use the role's color with contrast-aware text and fall
back to the old admin/gray classes when unset.
Global-search rows built the plugin detail URL from a hardcoded url_map of
plugin routes in core. Now core prefers a plugin's declared
get_asset_presentation route (ADR-010), substituting the core assetid via the
plugin's by-asset resolver; types that have not declared fall back to the legacy
id-keyed map, so nothing breaks. Measuring tools (which declare the route) link
through it now; machines/PCs/printers/network migrate off the hardcode as they
add a by-asset route + declaration. Presentation map is collected once per
search (cached on flask.g). 2 consumer tests; 26 search tests green.
Wires the ADR-010 get_asset_panels hook to a generic frontend renderer so a
plugin adds detail-page UI as JSON, no Vue. This is the Path A foundation that
lets simple plugins ship UI without a frontend build.
- components/PluginAssetPanels.vue + pluginAssetPanels.js: fetches
/api/pluginui/asset-panels for an asset, then each panel's data endpoint, and
renders by mode: list (title + status badge + meta lines via a field map),
keyvalue, table (declared or inferred columns), badge. Pure mapping logic is
in the .js module and unit tested (9 specs), same pattern as entryForm.js.
- New 'list' render mode with a declarative field map (title/badge/meta),
documented on the hook in base.py.
- Warranty migrated to it: get_asset_panels now declares a 'list' panel + map
that reproduces WarrantyPanel's output (vendor title, status badge with color
+ label map, servicelevel/ends/tag meta, manage link) with zero
warranty-specific frontend code.
- MachineDetail swapped from <WarrantyPanel> to <PluginAssetPanels> (pilot); the
hero warranty badge is unchanged. Verified end to end: the API serves the list
panel + map and the warranty rows; the page renders without error.
Rollout of the other 4 detail pages (PCDetail, PrinterDetail, NetworkDeviceDetail,
MeasuringToolDetail) and the map-overlays / asset-presentation renderers are
follow-up Phase 3 commits. 58 vitest, build clean, 1067 backend pass, naming green.
Deleting any user who owned an API token or appeared in the audit log
hit the users FK and 500ed - the import's 'importer' account being the
guaranteed case (its PAT plus every audit row the import wrote).
Tokens are revoked outright; audit history is kept but detached
(userid NULL), so the trail survives the account.
The lab is now a build-along mirroring what actually happened: ten
stages, each with the goal, the divergences, a see-it-work check, and
the errors genuinely hit while building (empty Migration error from a
broken model import, the migration-guard KeyError, the missing Lucide
icon, nested-app-context test writes, Decimal sums, and the authz
sweep catching the deliberately open kiosk take). That last one gets
its explicit EXEMPT_ENDPOINTS entry with a pointer to the decision
record - the net stays, the exception is reviewable. Full suite: 993
backend tests, 49 vitest, frontend build, naming hook, all green.
Fills the review's highest-value coverage gaps in the framework's own core
feature.
New tests/test_plugin_lifecycle.py: manager enable/disable dependency guards
(beta depends on alpha - enable-beta-first refused, disable-alpha-while-beta-on
refused) via synthetic plugins; enable seeds a plugin's RBAC permissions
idempotently; registry disable-survives-reload, corrupt-file recovery, and the
equipment->machines rename migration; `flask seed settings` idempotency.
test_plugin_contract.py: BUNDLED_PLUGINS now covers all bundled plugins incl.
geenforce, measuringtools, warranty (was 9, contradicting the CLAUDE.md "all
bundled satisfy the contract" claim); the structural checks now run against them.
test_authz.py: account lockout auto-unlock path (expired lockeduntil -> correct
password logs in and clears the lock state), previously untested.
All new tests pass; naming green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Settings exposure (review medium): GET /api/settings and /api/settings/<key>
now return the full table only to an authenticated principal. Unauthenticated
callers (kiosk dashboards, print pages, login screen, setup router) get just a
public allowlist - categories branding + map plus a named set (site_base_url,
facility_name, printer_hostname_template, contact_email_domain,
servicenow_enabled, setup_complete). A non-public single-key GET returns 404 so
existence is not confirmed. Secrets stay masked in both cases. Closes the
unauthenticated enumeration of smtp_host / employee_db_host / zabbix_url /
servicenow URLs. Allowlist mirrors the keys siteSettings.js + mapConfig.js +
setupState.js read before login.
audit.view (review low): the three audit-read routes (list, entity-history,
stats) were jwt_required only despite a defined-but-unwired audit.view
permission; now gated by it (seeded to admin), so a role-less member or unscoped
PAT can no longer read the cross-user audit trail.
flask seed test-user (review low): refuses outside DEBUG/TESTING - it creates
the well-known admin/admin123; production sites use `flask seed admin`.
Tests: unauthenticated allowlist + authed-full-masked + private-key-404, and
member-403 / admin-200 on audit routes. 336 authz tests pass; naming green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
PCs now report enforcement results back to shopdb, closing the desired-vs-observed
loop.
- POST /api/geenforce/report (geenforce.report service token): each cycle a PC
posts the published version it applied, install/skip/fail/filtered counts, and
per-entry outcomes.
- Two tables: manifestenforcementreports (latest-per-host + history: applied
version, enforcer version, counts, derived status ok/selfhealed/failed) and
manifestenforcementresults (per entry: action installed/skipped/failed,
selfhealed flag, exit code, warning/error message).
- RECEIVED: reports carry the applied version; the admin view derives
receivedlatest by comparing it to the scope's current published version, so
the fleet view shows which PCs picked up an update.
- SELF-HEAL: per-entry action captures drift correction (installed when it
should already be present) vs skipped (already good) vs failed, with messages.
- Admin reads: GET /reports (fleet compliance rollup) and GET /reports/<id>
(per-entry detail). New geenforce.report permission.
- Tables added to the (undeployed) 0001 baseline; geenforce.post_report is a
service-token endpoint so it is exempt from the JWT authz sweep, like the
collector blueprint. 8 reporting tests; full suite green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Metrology PCs (CMM, Keyence, Genspect, wax-and-trace imaging pc-types) drive
an attached measuring instrument. The PC itself stays a shopfloor PC, but the
collector now models the instrument:
- New METROLOGY_TOOL_MAP (pctypemap.py) maps those pc-types to a
MeasuringToolType (CMM, Vision System, Genspect, Form Tracer).
- ComputersPlugin._sync_measuringtool_link creates the MeasuringTool asset
once and a directional PC->tool "controls" relationship, tagged
collector:measuringtool. Idempotent (re-push reuses, no duplicate asset) and
self-archiving (a PC re-imaged to a non-metrology type deactivates the link
but keeps the asset and any calibration history). Mirrors the printer-link
pattern. The MeasuringToolType is created on demand if not seeded.
- 4 tests: create+link, idempotent re-push, non-metrology skip, repurpose
archives. Non-metrology PCs never warn about a missing controls type.
Settings rail cleanup:
- Collapsible groups so the 13-group rail fits without scrolling (1511px ->
488px). The group containing the current page expands; the rest collapse.
CSS-drawn caret (ASCII source, no Unicode). Empty groups never render, in
both the rail and the landing page.
- Measuring Tools group placed with the other asset groups (right after
Machines) instead of appended last; empty placeholder positions the
plugin-contributed cards.
- Operating Systems moved from PCs to General Reference: OS is cross-asset
(PCs, machines, measuring tools, network devices all run one).
Plus docs/proposals/ge-enforce-plugin.md: a planning doc for refactoring
GE-Enforce/DSC into a shopdb plugin (manifest as shopdb data, payloads on
SMB/HTTP/inline), grounded in the real manifest schema.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Collector: the computers collector schema gains defaultprinter and
printers; apply_collector_payload resolves each reported identifier to
a printer asset (windowsname/hostname/sharename/assetnumber/IP,
first-hit case-insensitive) and idempotently syncs relationships -
defaultprinter (directional) for the default, connectedto for the
rest. Collector-created rows are tagged so a re-report archives dropped
links while manual relationships are never touched; unresolved
identifiers warn instead of failing. Both PC and printer detail pages
show the links via the shared relationships card (no frontend change).
GE-Enforce Win32_Printer collection snippet documented.
Searchable custom fields: a per-field searchable flag (migration 7d24);
global search matches custom-field values on flagged active fields and
routes each hit to the asset detail page, reusing the existing
(type,id) dedupe and search_<type>_enabled domain filter. Searchable
toggle on the Custom Fields settings page.
822 tests pass; both verified live.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Email: a stdlib SMTP mailer (settings-first config, graceful no-op when
unconfigured), a test-email endpoint wired to the Email settings page,
forced first-login password change (users.mustchangepassword, migration
7d23, /change-password flow), new-user welcome mail, and on-demand
report/alert delivery (POST /api/reports/email + Email Report buttons)
with an external-cron-with-a-scoped-PAT path documented for automation.
All tests patch smtplib - no network.
Labels: a shared /print/asset-label/<type>/<id> view any asset detail
page opens - card or plain style, QR or barcode, configurable encoding.
Per-type qr_target_* templates plus label_default_style/codetype/encodes
settings on the Printing page. Measuring-tool labels default to encoding
their inspection-operation code (derived from the location name, e.g.
0615), so every tool in an area shares the area code - verified by
decoding the rendered QR. Machine labels default to the machine number;
blank-serial handled gracefully.
808 tests pass; both features verified live.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Support teams: contact management moved from a row expander to a modal
(Contacts (N) button per team); application detail Support card and the
modal show Email (mailto) and Teams chat buttons for contacts with an
SSO, derived as sso@ + a new contact_email_domain site setting
(default geaerospace.com, blank hides the buttons).
Audit log: hovering a user SSO shows the full name, resolved
best-effort from the employee directory in either mode.
Docs/hygiene from a standards review: CLAUDE.md active-state,
CONTRACT-STABILITY.md and README brought to contract 0.10.0 / 11
plugins / migration head 7d22; get_asset_panels endpoint path fixed in
the hook docstring; leftover debug console.logs removed.
781 tests pass; contacts modal, action-button hrefs, and the audit
tooltip verified live.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Plugins declare their own RBAC permissions instead of core accumulating
them: 36 permissions moved out of the core catalog into the 9 owning
plugins (core keeps the 19 its own blueprints enforce). The catalog is
resolved dynamically (core + enabled plugins) and feeds the roles grid,
the token scope picker and ceiling, and flask seed permissions;
installing or enabling a plugin seeds its permissions automatically. A
disabled plugin drops out of the assignable catalog while existing role
links keep working. New plugins - bundled or external - now bring their
permissions with zero core edits.
781 tests pass; live-verified with a machines.edit-scoped token.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A token scoped to the new collector.ingest permission is a collector
service token: the collector endpoints accept it via X-API-Key or
Bearer alongside the env fleet keys (which remain the fallback), giving
the fleet credential rotation, revocation, and last-used visibility
from the API Tokens page. Containment holds both ways: a collector
token authorizes nothing else, and no other credential gains collector
access. Shared token validation refactored out of the auth shim; a
Collector service token quick-preset in the create modal; integration
guide documents minting, rotation via site-config.json, and the
service-identity pattern.
765 tests pass; live acceptance matrix verified.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A token may carry a scopes list: it then grants only those permissions,
intersected with what the owner holds at use time, with the admin role
bypass suspended and role-gated routes denied - a scoped token from an
admin account is genuinely limited. Scope ceiling enforced at
create/update too (only permissions the owner holds; 400 lists
violations) and the picker only offers what you hold. Token management
itself now requires the new apitokens.create permission (admin by
default, grantable via roles). Unscoped tokens keep the exact prior
act-as-owner behavior; imports need an unscoped admin token.
Migration 7d22.
756 tests pass; live-verified scoped 201/403 matrix.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
API tokens: any user mints named, optionally-expiring tokens
(shopdb_pat_..., sha256-stored, secret shown once) at Settings > API
Tokens; a before-request shim swaps a valid PAT for a request-scoped
JWT of its owner, so the entire existing auth/authz/import-mode stack
works unchanged and revoked/expired tokens 401 cleanly. Built for
long-running scripts - the legacy import no longer dies when a login
JWT expires. Migration 7d21_apitokens; create/revoke audit-logged.
Audited integration gaps fixed: Asset.to_dict serializes measuring
tools (typedata + pluginid - relationship links to tools resolve); map
subtype filter/colors and MapEditor include them; dashboard totals
count them; warranty links use a new by-asset route; the measuringtools
ADR-010 hooks are real (corrected presentation token, implemented
map-overlay endpoint); the login avatar resolves through the
employee-photo helper.
737 tests pass; naming green; frontend builds; both features verified
live end-to-end.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Most facilities consider a Dualpath pair one physical dual-bay machine.
New site setting dualpath_single_machine (default on): the machines
list, dashboard counts, machines-by-type report, and floor map collapse
each pair to its primary bay (lower assetnumber), with combined
2007 / 2008 labels; pagination totals stay honest. Detail pages remain
per-bay and always show a dual-bay sibling banner linking the partner.
Pair resolution lives in core services and joins the plugin contract
surface (0.8.0 -> 0.9.0).
On the WJ dataset: 31 pairs collapse, machine counts 262 -> 231, map
470 assets. Toggle verified live in both states, left on.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Symmetric relationship types (isdirectional flag, migration 7d19) show
one entry per peer on the relationships card - a Dualpath pair no
longer lists its partner twice - and directional types read naturally
instead of Outgoing/Incoming. Deleting a collapsed entry removes every
underlying direction row.
Propagation is now real (migration 7d20): relationship types declare
propagation-through pairs in relationshiptypepropagations (M:N,
replacing the never-consumed single column); creating a controls link
on either bay of a Dualpath pair auto-creates it on the partner,
mirrored across both endpoints because live data stores controls as
bay -> PC. flask relationships propagate backfills existing data (29
rows fanned out on the WJ dataset, idempotent).
This also completes the tree that commit 1d21bf0 accidentally split
(core/models/__init__ imported RelationshipTypePropagation ahead of the
file that defines it), returning CI to green.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Model photos: upload/replace/delete on /api/models/<id>/image (admin),
stored under instance/modelimages/ with a public serve route; thumbnail
plus Upload/Replace/Remove controls in the Models settings modal; the
URL field remains as a manual alternative.
Employee photos, mode-aware: self-hosted directory employees get
upload/replace/delete (photo-<sso> under instance/employeephotos/,
employees plugin migration 0002); external directory mode passes the
HR-supplied picture URL through read-only (writes 409). One resolver
feeds both consumers - the shopfloor recognition/recert kiosk cards and
the employee detail hero - in either mode.
Navigation fix: router-view is keyed on route path, so following a
relationship link between two assets of the same type (machine ->
dualpath machine) reloads the page instead of showing stale content;
query-only URL changes still avoid a remount.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Replaces the legacy supportteams/appowners pair: supportteams
(teamname unique, teamurl ServiceNow link) + supportteamcontacts
(multiple named contacts with SSO per team, the people you reach out
to), applications.supportteamid intact. Migration 7d18 migrates each
legacy team owner into a contact, drops appowners, and has a validated
downgrade. New /api/supportteams CRUD (admin writes, import-mode
timestamps, teamname lookup), Support card on application detail,
contacts column on the list, and a settings management page.
IMPORT-API.md mapping updated to the concrete endpoints.
658 tests pass; live dev migration applied (24 teams / 24 contacts);
fresh-install and downgrade round-trips verified on scratch DBs.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Goal: an LLM or script can migrate an entire legacy database using only
the HTTP API - original history preserved, safely re-runnable.
- X-Import-Mode header (admin only): create/update endpoints across 15
timestamped entity types accept original createddate/modifieddate;
helper exposed via shopdb.api (contract 0.7.0 -> 0.8.0).
- Exact-match natural-key lookup filters on 13 list endpoints for the
lookup-then-upsert recipe.
- Selfhosted USB checkout/checkin accept backdated event times in
import mode.
- docs/IMPORT-API.md: operator manual grounded in the real legacy
schema - order of operations, full table-by-table mapping including
the machines fan-out, idempotent Python importer with dry-run, parity
checks, and decided dispositions for unmigrated tables (DNC config
stays live-fed via the collector; supportteams/appowners map to the
upcoming supportteams model).
635 tests pass; naming green; frontend untouched.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The sweep exercises usb/employees handlers, which default to EXTERNAL
directory mode when no setting row exists - green on the dev box where
the external MySQL databases happen to exist, red in CI where they do
not. Seed selfhosted mode in an autouse fixture so the guard is
deterministic everywhere. Verified by running the suite with the
external DB hosts pointed at an unreachable address.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Four data-only hooks on BasePlugin (get_settings_cards,
get_asset_panels, get_map_overlays, get_asset_presentation) with a
GET-only /api/pluginui consumer surface copying the dashboard-widgets
semantics. Pilots: warranty declares its asset panel; measuringtools
supplies its settings card, presentation, and calibration overlay -
the last hardcoded settings-nav entry is now hook-sourced. Generic
renderers for panels/overlays/presentation deferred per the ADR's
incremental adoption plan (documented in CONTRACT-STABILITY.md).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Every non-exempt POST/PUT/PATCH/DELETE must 403 a role-less member
and pass authz for admin; exemptions (auth, collector, setup wizard,
kiosk click-through, admin-or-self user update) are documented in
the test. Any future unguarded mutation fails CI as its own case.
Sweep confirmed existing gating complete: zero routes needed fixes;
lockout already implemented.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The equipment plugin is now the machines plugin, ending the UI-vs-code
vocabulary split while the contract is pre-1.0 and nothing external
depends on the old names.
- plugins/equipment -> plugins/machines: manifest, class, /api/machines,
machines.* permissions, registry key (with an auto-migrating load shim
for existing installs).
- Tables: equipment -> machines (equipmentid -> machineid) and
equipmenttypes -> machinetypes, renamed in the plugin's own migration
chain (machines0002rename), idempotent for both upgrading and fresh
installs.
- The legacy core machinetypes lookup actually types the vendor MODELS
catalog, so it is renamed losslessly to modeltypes
(models.modeltypeid, /api/modeltypes, Model Types settings page)
rather than collapsed, freeing the machinetypes name. Core migration
7d17_machines_rename also flips data in place: assettypes row
equipment -> machine, auditlog entitytype, identifier_/search_
settings keys, permission rows, and renames alembic_version_equipment.
- Frontend: machinesApi/modeltypesApi, item.machine response shape,
assettype value compares 'equipment' -> 'machine' (map, search,
custom fields, relationships), routes machines.js with plugin gating
retagged, /print/machine-badge, Machine Types (subtypes) and Model
Types (catalog) settings pages, machines-by-type report id.
- Docs swept; ADRs left as history per the authoring rule.
Upgrade: flask db upgrade then flask plugin upgrade-all.
Verified: dev DB flipped live (262 machines, 35 modeltypes, 95 models
retyped, zero equipment tables remain); fresh scratch-MySQL install
produces the new names; 341 tests green; naming/style green; frontend
builds; live E2E on machines list/detail, PC relationships, map,
reports, and both settings pages.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Framework:
- Per-plugin Alembic migration chains (ADR-008): every bundled plugin
carries its own chain with a stamp-only anchor at the ownership cutover;
new plugin schema lands in plugins/<name>/migrations/, never the core
chain. Deploys add flask plugin upgrade-all. Fixed a latent bug in the
shared alembic template (engine URL resolution) and taught the metadata
filter to include FK-referenced core tables.
- Frontend plugin route gating (ADR-009): plugin routes carry meta.plugin;
a disabled plugin's pages redirect to the dashboard via a cached,
fail-open check against the new public GET /api/plugins/enabled.
- get_reports() plugin hook (contract 0.5.0 -> 0.6.0): plugins contribute
report cards; warranty and toner cards moved off the hardcoded list.
Reports:
- Hub grouped by category with search; inline reports render at the top,
are URL-backed (?report=id, back-button and deep links work), expose
their server-side filter params as controls, and export CSV. Warranty
and Toner pages gained CSV export.
- Deleted the dead legacy Warranty Status report (always-zero buckets
from a retired column).
Theming and fonts:
- Inter (variable) bundled locally via @fontsource, replacing the Google
Fonts Roboto import - air-gapped installs now render correctly; tables
use tabular numerals.
- Optional brand_primary_dark_color, brand_accent_color,
brand_sidebar_color settings applied to CSS vars at bootstrap.
USB frontend repair (views were reading a dead legacy shape):
- List/detail/form and the employee profile USB panels remapped to the
real API shape (device_id/device_desc/checkinoutlog); employee panels
now use /usb/checkouts endpoints; external-mode /usb/checkouts/active
honors the badge filter; dead client methods pruned.
Also: warranties list page no longer requires login (matches app
convention); collector doc rewritten with a GE-Enforce integration guide
and paste-ready PowerShell reporter; ADR index and CHANGELOG updated.
Verified: 323 tests pass, naming/style green, frontend builds, plugin
migration dry-run green on scratch MySQL.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Make the app distributable to other GE Aerospace sites (one self-hosted
instance per site, ADR-004). GE values remain the shipped defaults; every
site-specific behavior is now a Setting an admin can change in the UI.
Settings-driven site config:
- Branding: site/QR/badge logos, favicon, primary color (upload endpoints
mirror the map-blueprint pattern; new Settings > Branding section).
- ServiceNow: search/incident/change URL templates ({ticket}), ticket
prefixes, enable toggle. Defaults point at the current
geaerospaceqa.service-now.com global search. Disabled = plain-text tickets.
- Employee-id regex (employeeid_pattern), printer hostname template,
QR label targets (qr_target_printer / qr_target_usb, blank = asset page,
else URL template with placeholders), usb_label_style (barcode|qr).
- West Jefferson floor-plan PNGs removed from the tree; generic placeholder
ships as the map default and sites upload their own blueprint.
Security closeout:
- dashboarddefaults writes now require admin.
- Collector: generic error messages (no str(exc) leak); API key accepted
via X-API-Key header only (BREAKING: querystring api_key removed).
- IP-based login rate limiting (AUTH_RATELIMIT_* knobs) atop account lockout.
- Setting.set() creation race fixed (IntegrityError retry).
Release engineering and docs:
- __version__ 0.5.0 (distinct from __contract_version__, ADR-007),
CHANGELOG.md, Gitea Actions CI config, frontend version aligned.
- One wizard-first install story across README/DEPLOY; new CONFIG.md,
UPGRADE.md, BACKUP-RESTORE.md; CLAUDE.md and ROADMAP de-staled.
- Dockerfile multi-stage build now bundles the frontend; compose binds
MySQL to 127.0.0.1; stale database/schema.sql and one-off SQL removed.
Debt and fixes:
- .query.get() -> db.session.get() sweep; datetime.utcnow() removed
(naive-UTC via timezone-aware now); users.py on authz decorators.
- Fixed 4 stale tests (slides feed shape, shopfloor splitperemployee,
plugin contract purity) and the USB label page field mapping (both usb
modes emit the cmmc shape: device_id/device_desc).
- Health endpoint reports the real version.
248 tests pass; naming/style check green; frontend builds; fresh-DB
flask db upgrade + seeds verified; QR targets verified by decoding
rendered codes.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Feature work from the 2026-07 session:
Settings IA
- Replace the flat 27-card settings hub with a persistent two-pane shell
(SettingsLayout.vue): grouped, searchable left rail + content pane.
- Nest all settings/* routes under the shell via router post-processing;
shared nav catalog in settingsNav.js. Group by asset class (PCs, Printers,
Equipment, Network) so per-type settings stop scattering.
Custom fields (core)
- customfields + customfieldvalues tables (migration 7d14), CRUD API at
/api/customfields, per-asset value get/save.
- Settings management page + reusable CustomFieldsSection (detail) and
CustomFieldsInputs (form) wired into all four asset types.
Warranty (new plugin)
- plugins/warranty: warranties + warrantyassets (migration 7d15), derived
coverage status, provider abstraction (manual now; Dell/Lenovo/HP stubs).
- API CRUD + per-asset panel + report buckets; WarrantyPanel on all four
detail pages; Warranties management page; Warranty report + Reports card.
- Seed warranty.* permissions.
Printer drivers
- printerdrivers table (migration 7d13) linked to printer models; drivers now
surface on the matching printer's detail page.
Other
- PCDetail rebalanced (Network + Status + Warranty + custom fields on the right).
- Rename PCs list "Features" column to "Remote Access"; fix badge hover underline.
- Drop equipment islocationonly field.
- Centralize asset-type label/route maps into utils/assetTypes.js.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Classic feature gap: a shopfloor/lobby kiosk auto-selects which business unit to
show based on the display PC's IP (classic dashboarddefaults table +
apivisitorlocation.asp). For the main admin dashboard this does nothing - it is
kiosk/visitor-display infra.
- Model: DashboardDefault (dashboarddefaults: ipaddress unique, businessunitid
FK, description). Migration 7d01_dashboarddefaults (head).
- API (core, /api/dashboarddefaults): CRUD + GET /visitor-location that resolves
the calling display's business unit from its IP (X-Forwarded-For/remote_addr,
or explicit ?ipaddress=); unmapped IP returns a null businessunitid, not an
error. Unauthenticated resolve (kiosks); writes are admin.
- Frontend: ShopfloorDashboard auto-selects its business unit via visitor-location
on load when none is chosen; Settings > Dashboard Defaults CRUD page +
dashboardDefaultsApi client.
Tests: create + resolve by IP -> BU; unmapped IP -> null; duplicate IP 409.
191 tests pass, naming green, app boots, endpoint + admin page verified live.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Extends the computers collector so it can replace the classic api.asp
updateCompleteAsset path that the shopfloor PC fleet uses to auto-update data.
Collector schema (project naming) now accepts the GE-Enforce/enrollment shape:
machinenumber, pctype, pcsubtype, serialnumber, loggedinuser, lastboottime,
lastcheckin, ipaddress, vendorname, modelnumber, osname, installedsoftware.
- machinenumber -> Asset.assetnumber (skips the 9999 imaging placeholder, falls
back to hostname), on create and update.
- pctype -> ComputerType via a configurable mapping (see below).
- vendor/model created if missing (free vocab); OS looked up (controlled, warns
if unknown); pcsubtype accepted but not yet stored (warning).
- Dropped per scope: VNC/WinRM flags, warranty, DNC config, multi-NIC.
Configurable pc-type mapping (the gea-shopfloor-* imaging taxonomy ->
ComputerType): defaults + resolution live in plugins/computers/pctypemap.py
(plugin domain, contract-pure - reads Setting via shopdb.api); overrides stored
as pctypemap_<pxetype> settings, seeded on plugin install, edited in Settings >
System > "Collector PC Type Mapping" (new UI section).
Migration doc: docs/COLLECTOR-INTEGRATION.md maps classic api.asp fields +
GE-Enforce status fields to the collector schema, documents machine-number
sourcing (registry MachineNo first, then C:\Enrollment\machine-number.txt) and
that the transport is interim.
Tests: complete-asset payload maps machinenumber/pctype/vendor/model/os; 9999
placeholder falls back to hostname. 186 tests pass, naming green, app boots,
mapping UI verified.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
