1fa005eb8a7aa33f4fc7f6f57052fcc51b931069
9 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
cproudlock
|
c22c81afa5 |
Show the controls link from both ends, and fix the dead chip links
THE RECIPROCAL LINKS BUG A PC's page showed "Serves machine 7803" at the top. The machine's page showed nothing equivalent, though the same edge was right there in the relationships card at the bottom. That asymmetry read as missing data and was reported as such. It was neither missing data nor an API fault. The endpoint returns both directions and always did; AssetTriageBand already walked outgoing AND incoming and deduped, with a comment explaining that production holds reciprocal rows. It then discarded every peer whose asset type was not 'machine', and hardcoded the label "Serves machine". So the component could only ever work from the PC side, and it was mounted only on the PC page. The counterpart type and label are now props, defaulting to the old values so the PC page is unchanged. The machine page mounts the band with counterparttype="computer" and the label "Controlled by". Eliminated with evidence rather than assumed, because this bug had already been misdiagnosed twice: the endpoint runs two queries and returns both arrays; the generic card renders both; that route has no pagination to clamp; and a single permission gate cannot admit one direction and not the other. THE RELATIONSHIP TYPE WAS ALSO HARDCODED Not every asset pair is linked by 'controls'. A machine reaches a printer through usesprinter and defaultprinter, so the band was blank on the printer page - the one page where the link is not obvious from the asset itself. The types are now a prop, and the printer page passes its own. THE CHIPS WERE DEAD LINKS Found while adopting the band more widely. It linked to /assets/<assetid>. There is no /assets/:id route and no catch-all, so every chip in the band was dead - and this change would have propagated that to four more pages. AssetRelationships.vue already resolved this correctly and privately. That function is now frontend/src/utils/assetRoute.js and both components use it, so a third caller cannot get it wrong again. Two things it gets right that are easy to miss: the detail routes key on pluginid, not assetid, so passing assetid opens the wrong record; and the lookup is now case-insensitive, because csvimport.py seeds 'Computer' and 'Machine' capitalised while this site's database holds them lowercase - a case-sensitive match produced dead links at whichever site seeded the other way. The band now carries pluginid and assettypename on each chip, which the resolver needs. TESTS assetRoute had none and neither did the band. Seven cover the resolver, including the assetid-vs-pluginid confusion and the seeding-case difference. On the backend, nothing asserted that the TARGET of a directional edge receives it in `incoming` - only that rows carry isdirectional. That missing assertion is this bug's exact shape, so it is now pinned: the endpoint was right all along, and the next such report should not cost anyone a re-diagnosis of the API. Verified on screen: the machine page shows "Controlled by G6K76CW3ESF" in the hero, the PC page is unchanged, and a page with no such link renders no empty band. Full suite 2162 passed, frontend 280 passed. |
||
|
cproudlock
|
dba8fc6071 |
Let somebody retire an asset without an API call
Five of the seven asset types had no way to take a record out of ShopDB from the interface. Network devices and 3D printed parts had a button; machines, PCs, printers and measuring tools did not, so a scrapped tool stayed in every list and report until somebody went to the API. The endpoints were already there and already correct. Every one of these DELETEs sets asset.isactive = False and nothing more, so the record leaves the lists while its calibration history, backups and relationships stay exactly where they were. Called "Retire" rather than "Delete" for that reason: the two existing buttons say Delete, which reads as destruction of a record that is in fact kept and can be restored by setting isactive back. The confirm says so too, because the question somebody needs answered before clicking is whether the history goes with it. The button is guarded on the record having loaded, on the two pages whose action row renders before the fetch resolves - measuring tools showed Retire beside a hidden Edit while the tool was still loading, which would have called delete with an undefined id. printersApi had no delete method at all; added. USB is deliberately left out. It retires through a status column in the external CMMC database rather than isactive, has its own /retire endpoint, and needs its own decision about what retiring means there. |
||
|
cproudlock
|
ed5d64fa3e |
Name the record in the browser tab, not just the section
Every detail page read "West Jefferson ShopDB - Machine". Two tabs on two different machines were indistinguishable, a bookmark said nothing about what it pointed at, and a link shared into Teams previewed as the section rather than the thing. The router cannot fix this alone: afterEach runs before the view has fetched anything, so it only ever knows the KIND of page. So a detail view names its record once the record arrives, and both writers go through composables/pageTitle.js. THE ORDERING IS THE WHOLE PROBLEM. The router awaits the site settings to build the "<facility> ShopDB" prefix, so on a cold load it finishes AFTER a view that fetched quickly and would overwrite the good title with the generic one. The route's fullPath is claimed before that await, and the generic write stands down when a record title already belongs to the route being landed on. The reverse case is handled too: a view that names its record BEFORE the facility name arrives composed against the placeholder prefix, so the late resolve rewrites it rather than leaving "ShopDB - CSF16" on a site called West Jefferson. Both are pinned by tests, because both fail only under timing. Covers machines, PCs, printers, network devices, subnets, measuring tools, USB devices, printed parts, applications, employees, knowledge base articles and guides. Printers reuse the page's own displayTitle, which already discards the literal name "NONE" a discovered queue can carry, so the tab and the heading agree. A record with no usable name, or one that failed to load, keeps the section name: "Machine" beats "Machine 4192" for somebody scanning a row of tabs. Long names are cut at a word boundary - knowledge base articles are named with a whole sentence of description, which a browser otherwise truncates mid-word. Reports gained meta.title, which the router already supported and nothing used. That also fixes "Pc Relationships", which the name-derived spelling produced. |
||
|
cproudlock
|
b7cfd2b198 |
A supply nobody could read is unknown, not empty
Reported as "CSF04 now reports all 0%", on the printer's own page as well as
the reports. Every supply on one host reading zero at the same instant is not
what a set of cartridges does; it is what a host that stopped answering looks
like.
getsuppliesbyip turned every unreadable item into 0:
try:
level = int(float(item.get("lastvalue", 0)))
except (ValueError, TypeError):
level = 0
An item that has never collected returns lastvalue as an EMPTY STRING, so
float('') raised and the handler substituted zero. lastclock was fetched in the
same request and read by nothing at all, so a reading from three weeks ago was
presented as current.
Zero is a legitimate level meaning spent, which is what made the substitution
dangerous rather than merely wrong. Downstream it reached `level <=
EMPTY_LEVEL`, which set daysleft to 0, which put the printer on the order list:
the report asked purchasing to buy a full set of cartridges for a printer
nobody had measured. On a waste container it was worse - waste is scored as
100 - level, so an unreadable one read as 100% full, the alarm state.
_readlevel now returns (level, lastseen) with level None for no usable reading:
empty, missing or unparseable lastvalue, or a lastclock older than 24h. A
lastclock that is absent is not treated as stale - a reading that cannot be
aged is not thereby wrong, and discarding it would lose real levels. A genuine
"0" is still 0, which is the half that keeps an actually-empty cartridge on the
order list.
classifysupply gains an 'unknown' status with remaining None. It is not
critical: critical is a claim someone acts on, and it may not be made about a
supply nobody measured.
The low-supplies report skips unknown rather than listing it as needing
replacement, and counts it in summary.unknown - a printer that has gone quiet
should be visible as that, not absent and not masquerading as empty.
_annotate_supply reads .get('level') with no 0 default, which would have put
the whole bug back.
PrinterDetail already rendered `level !== null ? ... : 'N/A'`, so it starts
telling the truth as soon as the backend sends null; the UI had been written
for a case the service never produced. It gains the unknown style - muted, not
a severity colour - and a tooltip separating "no reading at all" from "no
reading since <date>", which are different faults with different fixes.
Alerts needed no change: float(None) raises and that loop already continues,
so unknown supplies stop firing low-toner emails as a consequence.
12 of the 16 new tests fail on the old code. The 4 that pass either way pin
that real zeros still behave, which is the regression this fix could cause.
Not verified against CSF04's actual Zabbix data - dev has no reachable Zabbix.
This fixes the mechanism that turns unknown into 0%; /api/printers/<id>/supplies
now distinguishes them, with null for no reading and 0 for a measured zero.
|
||
|
cproudlock
|
f34b9ca710 |
Carry the level everywhere a position is drawn, and gate it per occurrence
The hover mini-map said "This asset has a position (2835, 1410) but no level" for every asset in the product. When 0.11.0 gave LocationMapTooltip a levelid prop, NONE of its seven call sites were taught to pass one - printer, machine and PC detail pages, the toner report, enforcement reports, the warranty chip and the dashboard cards - so the component correctly reported a missing level and the preview never drew. Two payloads behind those views also emitted mapx/mapy with no level: the toner report and the enforcement report. The map PDF export had the ORIGINAL bug still in it: it plotted every filtered asset onto the sheet, so exporting the ground floor printed second-floor markers on it. Worse than on screen, because nobody can correct a sheet once it has been printed and carried onto the floor. It now exports only the level being viewed. The legacy import loader sent mapleft/maptop with no level at three call sites. That loader is the one still to run against production, and every marker it created would have been undrawable. It now resolves the site's default level - the legacy schema predates levels and has one floor plan, so that is what its coordinates mean. THE GATE MISSED ALL OF THIS because it asked whether a FILE mentions 'levelid', not whether each position does: one module emitted 'mapx' six times and 'levelid' once and passed. It now checks per occurrence, covers scripts/ as well as shopdb/ and plugins/, and fails any Vue file that binds tooltip coordinates without :levelid. Both new rules were confirmed to fail the build against planted violations before being relied on. Printer QR labels: the asset number is no longer printed. A label now reads name (8201-HPLaserJetPro), QR, FQDN, then IP. The name falls back to the assetnumber because that is where sites actually keep it - every printer here has an empty name field, so preferring the Windows queue name alone would have printed a blank line on every label. |
||
|
cproudlock
|
24266146d8 |
Show the model's type only when it differs from the asset's own
Adding a "Model type" row next to "Type" put two rows in the Hardware section that read identically. They come from different tables - modeltypes is the catalog-wide list spanning every kind of asset, machinetypes is machine-only - but the names line up in practice: all 262 machines in the development database match exactly, which is the same fact that makes the type backfill safe. So the row now appears only when the two disagree, which is the case worth seeing: a model catalogued as one thing fitted to an asset recorded as another. When they agree it says nothing and is hidden. Applied to machines, PCs, printers and network devices, each compared against its own type table. |
||
|
cproudlock
|
3f320fcc8b |
Derive an asset's vendor from its catalog model, and show the model's own type
An asset that carries a model but no vendor was showing a blank the database could already answer: the model records its vendor, and both sides reference the same vendors table. Machines, PCs, printers and network devices now fall back to it. The fallback is FLAGGED, not merged silently. to_dict sets vendorfrommodel and the detail pages render "(from model)" beside the value, because the record itself is still empty: the edit form shows an empty vendor box, and a page implying the vendor is stored would be lying about where it came from. The model's type is exposed under its own name, modeltypename, and shown as a separate "Model type" row. It is deliberately NOT used to fill in the asset's own type. modeltypes is the catalog-wide list covering every kind of asset - it holds "Access Point", "Camera" and "Desktop PC" alongside the machine entries - so it is a different taxonomy from machinetypes. Only about two thirds of the names overlap, and mapping one onto the other would mistype the remainder, with the failure mode being a machine labelled "Desktop PC". scripts/backfill_vendor_from_model.py writes the derived vendor down for real, since the display fallback leaves reports that read vendorid still seeing nothing. It is a dry run unless given --commit, fills only rows where the asset's vendor is NULL and the model names one, and never overwrites a vendor somebody chose. It skips a table lacking either column, so it runs against a server whose network migration has not been applied yet. Verified against the development database by nulling one machine's vendor inside a transaction: it was detected as fillable, restored to exactly its original value, and the rollback left the row untouched. FLASK_ENV is not forced by the script. The app already reads it from .env, and overriding it demanded a SECRET_KEY the environment had no reason to supply. |
||
|
cproudlock
|
31139267d1 |
Fix model images 404 under a subpath mount (withBase)
Model image URLs are root-relative (/api/models/image/...), so on an /ops subpath deploy the raw <img src> resolved to the server root and 404'd. Wrap every model-image src in withBase(): machine/printer/PC/network detail heroes, the models settings preview, and the machine-badge / asset-label print pages. withBase leaves external http(s)/data URLs untouched. |
||
|
cproudlock
|
ebca0b00b0 |
ADR-013 Phase 4: relocate the remaining 9 plugin frontends (all 13 done)
Relocate warranty, measuringtools, network, printers, usb, notifications, computers, and slides into plugins/<name>/frontend/. Each plugin's views are pulled from wherever they lived (own dir, plus the shared views/settings/, views/reports/, views/print/ dirs, and top-level views) into the plugin's frontend/views/, and its route file becomes the self-contained routes.js. Handled the messy cases: - computers: name mismatch (its views live in views/pcs/) - moved by following the route file's own imports, so the dir name did not matter. Its OS/access- protocol/PC-type settings views move with it (only computers.js routed them). - network: NetworkHub's sibling sub-views (NetworkDevicesList, SubnetsBrowse, not directly routed) moved too so its `./` imports resolve. - printers: the qrLogo helper is SHARED with core AssetLabel, so it stays in views/print/ and PrinterQR imports it via @/views/print/qrLogo. - slides: route file is toplevel-only (TVDashboard); SlideManager stays core (core.js routes /settings/slides). frontend/src/views/ now holds only core views; frontend/src/router/routes/ holds only core.js. All 13 plugins are self-contained under plugins/<name>/frontend/. Verified live: Network (hub + moved sub-views), Computers (name mismatch), GE-Enforce (helper), printedparts all render from their staged frontends. Build + 58 vitest + naming green. |