The kiosk runs full-screen on a wall-mounted display, where the interface sat
against the top edge with the rest of the screen empty below it. It now
centres as one block, vertically and horizontally.
The title was the other half of it: the header was space-between, which reads
as centred only on the steps that show the Start over button. On the first
step, with no button to balance it, the title sat alone at the left edge of
the column. The title is centred and Start over is taken out of the flow so it
keeps its corner without shifting the title on the steps that have it.
Centring uses `safe center`, with plain `center` as the fallback line. On a
screen too short for the content, plain `center` overflows in both directions
and the header ends up above the scroll origin, unreachable. `safe` falls back
to top-aligned there and the page scrolls normally.
Two things a second site ran into.
The network device form asked for the map position as two raw numbers, so
placing a device meant reading coordinates off another screen and typing them
in. Machines, PCs and printers have had a "Set Location on Map" picker all
along, and the network API already accepted mapx and mapy - only the form was
missing. Same picker, same modal.
The 3D parts kiosk hardcoded 'WJ' as the prefix shown before the number box,
with a comment inviting whoever needed something else to edit the source. That
is West Jefferson's gage-lab tag format and nobody else's, so another site's
operators were told to expect letters that are not on their labels.
It is now printedparts_label_prefix, set in Settings, defaulting to EMPTY - a
site that has not set one sees no prefix rather than inheriting another site's
convention. West Jefferson sets it to WJ once. The kiosk hides the prefix
entirely when unset and falls back to no prefix if the setting cannot be read,
because a cosmetic hint must never stop a kiosk working.
Not to be confused with printedparts_code_prefix, which mints item codes like
3DP0042 and was already configurable. That is the code we generate; this is the
tag already printed on the label.
Two unrelated things found while looking at blank printer types.
Selecting a filter while past page one returned an empty list. The filter asked
the server for page 5 of a result set that now had one page, and the screen said
nothing matched. useListQuery already resets the page - setSearch and setExtra
both do - but the filter dropdowns bypassed it and called the loader directly.
Nine list pages now route through applyFilter, which calls setPage(1) when it
needs to and loads directly when already on page one, so the composable's URL
watcher does not also fire and fetch twice.
scripts/retype_models.py addresses why printer types cannot be derived. The
catalog types every printer model "Printer": true, and useless, since it does not
say whether the product is a laser, a plotter or a label printer. That answer is
a property of the model - every VersaLink C405 is a laser MFP - but nothing
recorded it, so nothing could derive it. Recording it on the MODEL means the
existing backfill fills every printer by exact name match, and a printer added
later inherits the right type the moment its model is chosen.
It exports the models needing a decision to CSV with a type suggested from the
model number, a person corrects the column, and applying it is a dry run unless
given --commit. A suggested type is refused unless it already exists in that
asset class's own vocabulary, which is what keeps the later name match working.
The suggestion order matters and got this wrong first time: a generic plotter
pattern matched "Zebra ZT411" and filed a label printer as a plotter. Brands now
come before generic patterns, and the review step exists precisely because a
confident wrong guess would type every asset using that model.
Verified on the development database: 24 printer models need a decision, 22 got
a sensible suggestion, applying them let all 42 printers match a printertype by
name, and the transaction rolled back cleanly.
Support teams gain a webhookurl (migration 7d29 + API + settings-page field), so
a team is a notification target. send_webhook(url=) lets a caller override the
site default with a team's webhook. Printedparts gains a 'alert support team'
setting (printedparts_alert_supportteamid) + selector on its settings page;
low-stock alerts post to that team's webhook, falling back to the site
alert_webhook_url. Email leg unchanged. Same pattern extends to other alerting
plugins (printers low-toner next).
send_webhook(title,text) posts alerts to an optional webhook (Teams Incoming
Webhook / Workflow, or generic JSON) via alert_webhook_url + alert_webhook_format
settings; send_alert fans out to it alongside email; exposed on shopdb.api
(0.13.0->0.14.0, PLUGIN-HOOKS synced); low-stock posts on its custom-recipient
path too. Also: recent-transactions table shows the consumed print-file revision.
Kiosk now displays the scanned revision (badge, quantity, and done screens) so
the operator sees which revision they checked out - it was already recorded on
the take, just not shown. Low-stock email now uses the gage lab tag (was the
internal item code) and links to the item page when site_base_url is set (new
core setting, category email; emails have no request context to derive the URL).
Label switches from CODE128 to a QR encoding 'TAG|rev' (gage lab tag + latest
print-file revision), so a physical part carries which revision it was printed
from - short payload stays low-version + reliable at 0.5in (margin quiet zone,
EC M, no logo). Item exposes latestrevision; kiosk strips the |rev to resolve
and records the scanned revision on the take (migration 0004 adds
printeditemtransactions.revision) for traceability of which rev was consumed.
Manual entry records a null revision.
The badge step card still showed the internal item code; show the gage lab tag
(fallback to item code) to match the label and list. The take still posts the
item code as the stable identifier.
Kiosk item lookup shows a fixed "WJ" prefix addon so operators type only the
number off the label. The label page - and the detail "Part Label" button,
renamed from "Bin Label" - now barcodes and prints the gage lab tag, falling
back to the internal item code when a part has no tag assigned.
The bin step hid entry behind a "Type the number" link, and a plugged-in
keyboard could not drive the visible fields. Replace the hidden wedge input
with one visible, always-focused input per step that a wedge scanner, a
physical keyboard/numpad, and the on-screen keypad all feed; Enter submits.
inputmode="none" keeps the OS soft keyboard from popping on a touchscreen.
The list showed the internal auto-minted itemcode; the gage lab works from the
WJRP gage lab tag. Show gagelabtag as the primary identifier, falling back to
itemcode when a row has no tag assigned.
The staging step that makes lean per-site frontend builds possible, plus the
first plugin relocated as the pilot.
- scripts/stage-frontend.mjs: copies each chosen plugin's plugins/<name>/frontend/
into frontend/src/.plugins-staged/<name>/ and codegens routes.gen.js. Plugin
selection via SITE_PLUGINS (comma-separated); empty = all plugins that have a
frontend/ (the full build). Wired as npm predev/prebuild; outputs gitignored.
- Router imports routes.gen.js and merges staged routes with the in-tree
./routes/*.js glob - dual-location during the transition.
- printedparts relocated: its 6 views (list/detail/form/kiosk + the settings and
labels views from the shared dirs) moved into plugins/printedparts/frontend/
views/, core imports rewritten to the @/ alias; routes.js is the self-contained
route module. Its old in-tree route file is removed.
Also fixes a crash the previous commit (37c764b) shipped: slides.js exports only
`toplevel` (its child routes live in core.js), so the router's
flatMap(m => m.default) produced an undefined child and threw
"Cannot read properties of undefined (reading 'path')" at load - the whole SPA
went blank. Guarded with `m.default || []`. (The earlier "print pages are blank"
reading was this crash, not page nature.)
Verified live: /machines renders again; the relocated /printedparts list renders
identically from the staged plugin frontend; SITE_PLUGINS=machines excludes
printedparts from routes.gen. Build (via npm, runs stage) + vitest + naming green.
