412c2dc877cfd27413bfc134556e4c543ae77ca7
37 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
cproudlock
|
1c04ff28b9 |
Close the remaining installer review findings
Eleven findings, grouped by the root cause each belongs to. Wizard input reaching a command line unchecked (ShopDBFlask.iss). Port fields were spliced in bare and arrive as [int] parameters, so a blank or mistyped port shifted every argument after it; both port fields are now validated as 1-65535 digits. A path ending in a backslash, which is what a drive root looks like, ended its argument with \" and CommandLineToArgvW read that as an escaped quote, so paths are now quoted through a helper that doubles the trailing backslash. A drive root is refused outright as well: uninstall deletes the application directory recursively, so installing to D:\ would have wiped the drive on removal. The password handoff was written with SaveStringToFile, which writes an AnsiString, and read back as UTF-8, so a correct non-ASCII password was reported as wrong; it now goes out as UTF-8 without a BOM. Launching without checking the result. Plugin deregistration invoked "flask plugin uninstall" without --yes, and the command carries a click confirmation_option that aborts with exit 1 when nothing can answer the prompt, so it could never once have succeeded; the bare 2>&1 under EAP Stop then turned that into a terminating error which the catch downgraded to a warning while the plugin directory was deleted regardless. It now passes --yes, brackets the error preference, restores the location in a finally, and keeps the code on disk unless deregistration actually succeeded. MarkShortcutRunAs had four quotes where it needed three, which kept the whole command inside one Pascal literal so LnkPath was never interpolated and no shortcut ever got the elevation flag; its exit code is now logged too. Comparing IIS physical paths as raw strings. IIS stores the path as typed, so it may carry environment variables or a trailing backslash. A Test-SamePath helper now normalises both sides. That closes a real hazard in uninstall, which matched applications on alias alone and would remove an unrelated application of the same name under another site, unattended, since -OnFailure never suppresses the confirmation. Accepting existing IIS state without reconciling it. "Site already exists" took the site however it was, so re-running with a different port left the old binding while CORS_ORIGINS, the firewall rule and the smoke test all used the new one, failing a working server. It now refuses with both ports named rather than silently re-binding, and refuses a site of that name serving a different directory. Preflight rows drawn past the panel. The failures loop had no cap at all and the warnings loop capped at 6, a number unrelated to the panel, which holds about three rows. The cap is now measured from the panel height, applies to both loops, and the footer counts what was actually left out instead of inferring it. Also: a failed upgrade now says the application pool is still stopped and how to start it, rather than only "part-configured", since stage 2 stops a pool that was serving. It is deliberately not restarted automatically, because after a stage 3 failure the deployed code and the schema may disagree. shopdb-admin Restart-App starts a stopped pool or site instead of recycling, which is a no-op on a stopped pool and then reported the application as unresponsive. A dead Write-Log line that parsed as three arguments is gone, and a preflight warning no longer tells the operator to add a directory to a compiled exe. |
||
|
cproudlock
|
ce521e84a5 |
Lock down backup directory ACLs, and let the uninstaller reach IIS
Two findings from the installer review, both of which fail silently. Database dumps were readable by every authenticated user. A directory created under ProgramData inherits BUILTIN\Users:(I)(OI)(CI)(RX), and a dump contains every row including the users table and its password hashes. The installer applied an owner-only ACL, but only in the branch that CREATED the directory, so a directory created first by the console (shopdb-admin.ps1 backup) kept the inherited permissions and the installer could never repair it. The ACL is now re-applied on every run rather than only on creation, and the grants are made inheritable with (OI)(CI) so dumps written into the directory later are covered too. shopdb-admin.ps1 applies the same hardening for the default location, and for an operator-named path says the dump holds password hashes rather than silently rewriting the ACL of a directory that is theirs. Verified on Windows: before, the directory carried BUILTIN\Users:(I)(OI)(CI) (RX); after, only SYSTEM and Administrators, and a file created inside inherits exactly those two. Without (OI)(CI) that file would not have been covered. The uninstaller could not remove anything in IIS. [UninstallRun] launched a bare "powershell.exe", and the Inno uninstaller is a 32-bit process, so WOW64 resolved it to the 32-bit PowerShell, which cannot see the IIS provider. The site, application pool and application survived, pointing at a directory that HAD been deleted, while Windows reported a clean uninstall. It now uses the same Sysnative path as the [Run] entry, which was the last unshielded launch site in the file. |
||
|
cproudlock
|
aeee210cf6 |
Repair a web.config that an earlier build made unusable
Stage 4 deliberately leaves an existing web.config alone, because operators put real changes in it: extra MIME maps, a /installers location, bindings, a proxy-specific rule. Overwriting reverts those silently. That rule had no exception, and earlier builds of this installer wrote an <allowedServerVariables> block which is fatal on its own: the section is Deny by default, so IIS rejects the entire file with 500.52 before httpPlatformHandler runs. Any server already installed would therefore keep the broken file forever, with re-running the fixed installer powerless to help, since the first thing stage 4 does is decline to touch it. Strip just that element, keeping every other edit, and only when it contains nothing besides the variable this installer adds. A block holding anything else is somebody's deliberate change and is left alone with a warning. The previous file is copied to web.config.before-xff-fix first. Exercised against four inputs: the file earlier builds wrote, which is repaired and still parses as XML with the rewrite rule intact; a block with an operator-added variable, which is left unchanged; an empty block, which is the $null.Count trap under Set-StrictMode 2.0 and is why the filter is wrapped in @(); and an already-correct file, which is a no-op. |
||
|
cproudlock
|
95b0b77c13 |
Allow HTTP_X_FORWARDED_FOR at server level instead of declaring it per-application
The stage 5 smoke test failure was a locked config section, but not one of the two the installer unlocks. A diagnostic collected from the server returned: HTTP 500.52 - URL Rewrite Module Error Module RewriteModule, Handler httpplatformhandler Error Code 0x80070021 Config Error: This configuration section cannot be used at this path. Config File: \\?\C:\shopdb-flask\web.config handlers and httpPlatform were both overrideMode Allow and locked false, so the unlock had worked. The section at fault was a third one, system.webServer/rewrite/allowedServerVariables, which ships overrideModeDefault="Deny". web.config declared <allowedServerVariables> locally for the X-Forwarded-For rule, and IIS rejects that declaration outright, failing the entire configuration before httpPlatformHandler ran. python was therefore never launched and C:\shopdb-flask\logs stayed empty, which reads as a dead application or a permissions fault and is neither. Unlocking the section would let every site on the machine declare arbitrary server variables. The installer now adds the single variable to the server-level allow list, checking first because a duplicate add is an error, and web.config no longer declares it. The rewrite rule is unchanged. Verified by applying the installer's own uncommenting to the template and parsing the result: one rewrite element, no allowedServerVariables, the rule still setting HTTP_X_FORWARDED_FOR from REMOTE_ADDR. shopdb-diagnose.py checked only the two sections the installer unlocks, so it could not have named this one; the IIS error page did. It now reports the lock state of the rewrite sections as well. |
||
|
cproudlock
|
10ee3a3c58 |
Add a stage 5 diagnostic collector
The stage 5 smoke test failing tells us only that IIS did not return 200. The cause is in one of four places, and finding out which has taken a round trip per guess. This gathers all four in one pass and writes a single report. It records what IIS actually answers on localhost, 127.0.0.1, ::1 and the machine name, including the status code and the parsed text of the IIS error page; the site, application, pool and module state from appcmd, plus the override state of the two config sections httpPlatformHandler needs; the contents of web.config and the resolved httpPlatform processPath; whether the venv can import shopdb and call create_app; the application logs, separating a missing log from an empty one; the ACLs the pool identity depends on; and recent HttpPlatform, WAS and W3SVC event log entries. Secrets never reach the report. Values are read from .env first, then scrubbed from every section before the file is written, which covers command output and tracebacks that might quote them. A password embedded in any connection URL is also masked whether or not it came from .env. Standard library only, so it runs on the bundled runtime or any system Python. Verified end to end on a Windows VM: it correctly reported a 404 with the IIS error code for an absent application, and that localhost resolves to ::1 first. |
||
|
cproudlock
|
97391cdee4 |
Unlock IIS config after the application exists, and report why the smoke test failed
Two defects found in the stage 4 and stage 5 logs from a Windows Server 2019 install. The scoped config unlock ran before the thing it unlocks existed. appcmd resolves its location argument against applicationHost.config, but the unlock was issued from the ACL block, ahead of New-WebApplication. On a first install "Default Web Site/shopdb" is not there yet, so appcmd returned 80070003, "the system cannot find the path specified", and the code fell through to unlocking the section for the entire machine. That fallback exists for servers which refuse the scoped form; it was instead the only path a first install could take, so every install silently granted handler delegation server-wide. Moving the block below site and application creation lets the scoped unlock work. The smoke test discarded the diagnosis. Invoke-WebRequest raises on any non-2xx, and the catch block kept nothing from the exception, so a fault IIS had already identified by status code was reported as "site did not return 200 ... check the logs". It now records the status code and the text of the IIS error page, and prints the tail of the HttpPlatform stdout log, which is where a Python traceback lands. It also distinguishes a missing log from an empty one: the first means the pool never launched python, the second that python started and wrote nothing. A non-200 that did not raise, such as a redirect, skipped the retry delay, so the loop could spend all twelve attempts at once and report a timeout without having waited. |
||
|
cproudlock
|
a352a21a10 |
Declare packaging as a runtime dependency
shopdb/plugins/loader.py imports packaging.specifiers and packaging.version at module scope, but packaging was never listed in requirements.in. It was present in every development and CI environment as a transitive dependency of pytest, so the full suite passed while a venv built from requirements.txt alone could not import shopdb at all. The Windows installer builds exactly such a venv, so stage 3 failed on a customer server with ModuleNotFoundError: No module named 'packaging', after the runtime and all wheels had installed successfully. Add packaging to requirements.in, recompile the hashed lockfile, and add the wheel to the offline wheelhouse with the matching bundle-lock entry. The recompile also picked up newer uv formatting: inline environment markers on cffi and greenlet and shorter "via" comments. The pinned distribution set and every existing hash are unchanged. tests/test_runtime_dependencies.py guards the general case by scanning shopdb/, plugins/ and scripts/ for unconditional third-party imports and asserting each maps to a distribution pinned in requirements.txt. Test dependencies are the blind spot for this class of failure, since they are present wherever the suite runs and absent wherever it does not. |
||
|
cproudlock
|
f6b621d126 |
fix(installer): keep -Wait, and use the stage-0 handoff even when .env exists
Two defects from a Server 2019 run that got further than any before it - the payload verified against the lock on a real server for the first time. EMPTY EXIT CODE. "Python install failed (exit )" on an install that had actually worked. Dropping -Wait to make -TimeoutSec enforceable left $p.ExitCode unreadable: PowerShell only reliably populates it on a waited process. -Wait is restored and the trade is now explicit - exit codes are load-bearing here, 1639 vs 1603 vs 3010 is the entire diagnosis, and a bounded wait is not worth losing them for. -TimeoutSec is advisory: logged as an expected duration so a hang is identifiable, not enforced. The code is also read defensively now, and an unreadable one fails loudly rather than being taken for success. That timeout has never worked - -Wait made the block dead code from the start - so nothing is lost that was ever there. Trying to fix it broke something that was working, which was the wrong trade to make silently. STALE .env PREFERRED OVER A GOOD HANDOFF. The .dbpass fallback sat in the else of "if .env exists", so it was consulted only when .env was absent. A part-finished install HAS an .env, holding whatever password stage 2 last wrote; if stage 0 has since regenerated the credential, .env is stale and .dbpass is correct - and the installer preferred the stale one, giving "Access denied" with the right password sitting unread on disk. The handoff is now applied before the branch, so it covers both, and only when .env points at the local server so it can never redirect a site whose database lives elsewhere. |
||
|
cproudlock
|
21110b86eb |
fix(installer): clear the retry path, which is the path everyone is actually on
Five defects from the Windows-defect review, each confirmed against the code
before changing it. Four of the five only fire on a RE-RUN - and after eight
attempts a re-run is the normal case, not an edge case, which is exactly why
they survived.
Invoke-Native, three defects in one function:
- Any non-zero exit was failure. 3010 and 1641 mean "done, reboot required",
and the VC++ redistributable returns 3010 on a server with a pending file
rename - an ordinary state on a freshly patched box. It is now an accepted
outcome for the installers that can report it, logged as a warning so the
operator knows a reboot is owed.
- -Wait blocks inside Start-Process until the child exits, so the -TimeoutSec
block below it could never run. Every timeout on every MSI was decorative.
The wait is now bounded here, followed by a parameterless WaitForExit so the
redirected output is flushed before it is read.
- The Python bootstrapper ran /quiet with no /norestart, free to reboot the
server mid-install.
Stage 0 refused to run when a MySQL service existed - including the MySQL84 it
had registered itself. Every bundled-database retry dead-ended while the wizard
promised that re-running was safe. A foreign MySQL still blocks; ours is started
if stopped, and the create-the-server block is skipped. It also no longer tries
to bootstrap through a root account whose password it set on the previous run:
with the handoff present there is nothing to do, and without it there is no safe
automatic recovery, so it says what to do instead of guessing.
Stage 4's appcmd unlock used '2>&1' under $ErrorActionPreference = 'Stop', which
turns any appcmd stderr into a terminating error - so the exit-code test and the
server-wide fallback, the whole reason the block exists, were unreachable, and
the stage aborted after Python, the venv, the schema and the ACLs had been
changed.
Stage 3 ran prune-schema and treated its refusal as a failure. Refusing is the
designed outcome when a table holds rows, signalled with SystemExit(1), so
Invoke-Native killed the stage and the reporting written to explain the refusal
was unreachable. Core migration 7d05 seeds access protocols owned by the
computers plugin, so any profile omitting computers hit this on every retry.
The preflight's MySQL 5.6 index-flag check is a warning, not a blocker. It
inspects the LOCAL MySQL, which may not be the database being installed against;
stage 3 checks the one actually chosen. Same class as the HttpPlatformHandler
blocker fixed earlier.
|
||
|
cproudlock
|
5f350179b1 |
fix(installer): undo a fix applied twice, and load the checker at script scope
A review of the installer for Windows-only defect classes found seven live issues. These two would have stopped the next attempt on any server. DOUBLE-APPLIED GUARD. Yesterday's $null.Count fix was applied at BOTH ends: Test-BundleLock returns ,$problems, and the call site also wrapped it in @(). The comma already hands the array back intact, so the extra @() nests it and .Count becomes 1 regardless of how many problems there are. Every install would have failed with "the bundle does not match bundle-lock.json (1 problem(s))" on a byte-perfect payload. Applying the same guard at both ends was worse than applying it at neither. Verified in a Windows VM against a real bundle: clean 0, tampered 1, restored 0. DOT-SOURCE SCOPE. bundle-lock.ps1 was dot-sourced INSIDE Assert-BundleIntegrity, which loads it into that function's scope - every helper it defines disappears when the function returns. Assert-BundleIntegrity itself worked; the next caller, Get-WheelhousePythonTag, died with "The term 'Get-JsonProperty' is not recognized". It only fires where a venv already exists, so greenfield was fine and every retry after a part-completed install was not. Now loaded once at script scope, guarded so the stages that run without a bundle still work. Both were confirmed by running them rather than by reading: the nesting with a three-case pwsh test, the scoping with a minimal repro. |
||
|
cproudlock
|
14fedcee4c |
fix(installer): a clean payload crashed stage 2
Reported from Server 2019: "The property 'Count' cannot be found on this object" immediately into stage 2. Test-BundleLock returns an array of problems, and an EMPTY array means the payload is exactly right. PowerShell unrolls a zero-element return into $null, and under Set-StrictMode 2.0 $null.Count throws - so the branch that runs when everything is correct was the one that could not run. Every failing bundle got past it fine, which is why nothing caught it until the 8.3 path fix made verification succeed for the first time on a real server. Fixed at both ends: the call site wraps in @(), and Test-BundleLock returns ,$problems so no caller can be handed $null or a bare string depending on how many problems there happen to be. The other .Count uses in this file were already @()-wrapped and are unaffected. |
||
|
cproudlock
|
fe091e751a |
fix(installer): the bundled database rejected connections it should have accepted
Two defects in the stage 0 bootstrap, both surfacing as "Access denied" on a server where the operator was holding the correct password. CREATE USER IF NOT EXISTS is a no-op on an existing user - it does NOT change the password. Stage 0 generates a fresh password every run and overwrites .dbpass with it unconditionally, so any path that re-runs the bootstrap over an existing account left the handoff holding a password the server had never been told. ALTER USER now follows each CREATE, so the stored password and the handoff always agree. The user was also only created for 'localhost' and '127.0.0.1'. On current Windows, 'localhost' resolves to the IPv6 loopback FIRST, so an operator who types localhost rather than 127.0.0.1 arrives as '<user>'@'::1' - an account that did not exist - and MySQL answers "Access denied" naming a host they never typed. The ::1 account is now created and granted alongside the other two. Note the datadir guard means the first defect could not fire on a straightforward re-run - stage 0 refuses a non-empty data directory before reaching the bootstrap. It was still wrong, and reachable once the directory has been cleared by hand, which is what the failure message tells operators to do. |
||
|
cproudlock
|
189a474082 |
fix(installer): do not demand a password the installer already holds
Asked why the password box does not pre-fill from .dbpass. It should not - but it should not have been demanding a password either. .dbpass is the ACL'd handoff stage 0 writes when it creates the database itself, and stage 2 already reads it automatically when no password is supplied. The wizard, though, required a password whenever .env was absent, without checking for the handoff. On a server where stage 0 had completed but stage 2 had not - which is exactly what a partly-failed install leaves - the operator was blocked on a secret the installer already had, and sent hunting for a generated password they were never meant to handle. Blank is now accepted when either .env or .dbpass is present, and the sign-in page says so when it sees a handoff. Deliberately NOT pre-filled into the password box, for two reasons. It is the only copy of a generated password, so round-tripping it through a UI control and back out through a temporary password file adds exposure for no benefit - stage 2 reads the file directly. And .dbpass belongs to the BUNDLED database; on the existing-database page the operator is pointing at someone else's server, where a locally generated password is simply the wrong answer. |
||
|
cproudlock
|
5f18ca27a1 |
fix(installer): split the database page so every field is reachable
Trimming the description brought the Username box back and left Password off the bottom. CreateInputQueryPage stacks its fields below the description and neither scrolls nor shrinks, so a field that does not fit is drawn past the surface and simply never appears - no error, no scrollbar. Sizing the description against a pixel budget that varies with DPI and font scaling is guesswork, and it had now failed twice. Connection details (host, port, database) and sign-in (username, password) are now two pages of three and two fields. Both fit under any reasonable description, at any scaling, without anyone having to estimate. The upgrade hint about leaving the password blank moves to the sign-in page, where the password field actually is. ShouldSkipPage hides both pages for the bundled-database option, and the stage arguments read the values from their new homes. |
||
|
cproudlock
|
e650eb0220 |
fix(installer): database page lost its Username and Password boxes
Reported from the Server 2019 test: the Existing database page rendered a truncated "Username:" label and no input boxes at all below it, so there was no way to enter connection details. CreateInputQueryPage lays its fields out BELOW the description text. The description had grown to include a five-line CREATE DATABASE / CREATE USER / GRANT block, added so a DBA could be handed the exact SQL. With five fields underneath, the last two fell past the bottom of the page surface, where they are simply not drawn - no error, no scrollbar, just missing controls. The description is back to three lines. The SQL moves to docs/INSTALL-WINDOWS.md, which is where someone would look for it anyway and where it can be copied without being retyped from a wizard page. Wizard page descriptions are a fixed budget: anything long enough to be worth reading twice belongs in the guide, not on the page. |
||
|
cproudlock
|
c5797bb339 |
fix(installer): payload verification broke on 8.3 short paths
A Server 2019 install reported all 96 payload files as simultaneously missing and unexpected, with mangled names - wheels/heels/flask.whl, python/ython/python-3.14.6-amd64.exe, mysqlclient/lient/mysql.exe. Exactly five characters of each directory name survived, which is the difference between ADMINI~1 and Administrator. Inno extracts the bundle under C:\Users\ADMINI~1\AppData\Local\Temp\..., an 8.3 SHORT path. Resolve-Path kept that short form while Get-ChildItem returned the long one, so the root was five characters shorter than the prefix being sliced off every FullName, and every relative key came out wrong. The payload was correct; the comparison was not - the verifier refused a perfectly good bundle. The root now comes from Get-Item, which goes through the same provider as Get-ChildItem so their path forms agree, and the prefix is checked with StartsWith before being trimmed. If the two ever disagree again this throws instead of inventing paths. Verified against the real failure mode rather than assumed: running the check through C:\SHOPDB~3\bundle in a Windows VM now passes. Nothing on Linux or in a normally-pathed Windows directory could have caught this - the short name only appears under a profile directory long enough to need one, which is where Setup extracts. |
||
|
cproudlock
|
263ae8e3b4 |
fix(installer): install the Visual C++ runtime before MySQL, and log the MSI
Second failure from the Server 2019 test. The previous fix worked - msiexec went from exit 1639 (ERROR_INVALID_COMMAND_LINE, which is why it printed its usage dialog) to exit 1603 (ERROR_INSTALL_FAILURE), so the command line parses now and the MSI itself is failing. It failed in 1.1 seconds. An MSI that dies that fast has not begun installing; it has failed a launch condition. MySQL 8.4 requires the Visual C++ redistributable and a bare Windows Server does not ship it - the same runtime mysql.exe and mysqldump.exe import, which was visible when their DLL dependencies were trimmed and went unnoticed. Stage 0 now installs VC_redist.x64.exe from the bundle before touching MySQL, skipping it when vcruntime140.dll is already present, and fails with a sentence naming the requirement if the redistributable is absent from the bundle altogether. vcredist\ is an optional locked payload. msiexec also gets /l*v now. A bare 1603 names neither the failing action nor the reason, and it is the most common MySQL install failure - diagnosing this one took a launch-condition inference rather than a log. The MSI log lands beside the installer's own in ProgramData, so the next failure is readable instead of guessed at. |
||
|
cproudlock
|
8d0afc40d3 |
fix(installer): bundled MySQL install failed on a malformed msiexec command line
Reported from a Windows Server 2019 test: a "Windows Installer" dialog listing every msiexec /Option appeared, then the wizard reported that the bundled MySQL database could not be installed. That dialog is msiexec's usage help - it prints it when the command line does not parse - so the install never started. Cause: $MysqlRoot defaulted to 'C:\Program Files\MySQL\MySQL Server 8.4', which contains spaces. Invoke-Native wraps any argument containing whitespace in quotes, producing "INSTALLDIR=C:\Program Files\...". msiexec takes public properties as PROPERTY=value and expects the VALUE quoted - INSTALLDIR="C:\Program Files\..." - so it rejected the line, printed usage, and exited non-zero. This file already carried the rule, next to the Python target: "Never put a space in a path this installer controls." I broke it setting the 8.4 path. Two fixes, because one of them alone leaves the trap in place: - $MysqlRoot is now C:\MySQL84, space-free like C:\Python314. The MySQL client search paths in the installer, the preflight and the operator console all look there first, keeping backups working against the bundled server. - Invoke-Native now quotes PROPERTY=value correctly, so passing a spaced path explicitly no longer produces an unparseable command line. tests/test_installer_defaults.py fails if an installer-controlled path default ever contains a space again. |
||
|
cproudlock
|
5321649e02 |
fix(installer): stop blocking the wizard on things the installer itself installs
The preflight page began refusing to continue while any check was failing, which is right for something the operator must go and fix. HttpPlatformHandler was marked FAIL when absent - so on a server without it the wizard stopped dead, telling the operator the server was not ready, over a module the bundle carries and stage 4 installs a few pages later. The only way forward was to go and install by hand the exact thing the installer was about to install. It is now INFO: reported, not blocking, matching how URL Rewrite is already handled. Nothing the installer SUPPLIES may block the wizard, and tests/test_installer_defaults.py now fails if that rule is broken again. The site-port conflict check is downgraded from FAIL to WARN for the same class of reason: it runs before the operator reaches the Address page, so it tests the DEFAULT port rather than the one they intend to use, and blocking refuses an install over a conflict the very next page lets them resolve. Genuine blockers are unchanged - no IIS, no WebAdministration, wrong Windows edition or architecture, no disk, and the MySQL 5.6 index flags. Those the operator really does have to fix first. |
||
|
cproudlock
|
f72813ed9c |
feat(installer): bundle the database - MySQL 8.4 LTS, not 8.0
The bundled-database option could not actually be built. Stage 0 looks for mysql\mysql-8.0.x-winx64.msi, and Oracle no longer publishes a standalone server MSI for 8.0 - every 8.0.x returns 404. What remains for 8.0 is the MySQL Installer bundle, which is an installer-manager: 'msiexec /i INSTALLDIR=' would install THAT rather than a database, and stage 0 would then fail on a missing mysqld.exe. MySQL 8.0 also reached end of life in April 2026, so bundling it would have put an unsupported database on every new site. 8.4 LTS still ships the standalone MSI (129MB, which is what the '125MB' note in stage 0 was written against) and is supported into 2032. Defaults follow it: install root MySQL Server 8.4, service MySQL84. The operator console still looks for an 8.0 install path as a fallback, for sites already running one. Also bundles mysqlclient\ - mysql.exe and mysqldump.exe with the two OpenSSL DLLs they actually import, 20MB rather than the 51MB of debug and auth-plugin libraries the archive ships. Stage 2 stages it onto the server, so a site whose database is on ANOTHER host can still take the pre-upgrade backup that every upgrade depends on. That was the gap the preflight had started warning about. Bundle is now 221MB. |
||
|
cproudlock
|
2c415a1712 |
fix(installer): correct a false security claim, and clear the should-fix list
CLIENT IP / SPOOFABILITY. docs/geenforce-api-cutover.md claimed that removing the IIS rewrite rule made the allowlist fail closed and that it does NOT become spoofable. The opposite is true. IIS never sets X-Forwarded-For on its own; the rule is the only thing that does. Remove it and IIS still forwards whatever X-Forwarded-For the CALLER sent, waitress trusts it because it arrives from 127.0.0.1, and remote_addr becomes attacker-controlled - so a token-less caller can fetch manifests from anywhere on the network. The document and the _trusted_client_ip docstring now say so, waitress runs with --trusted-proxy-count=1, and stage 5 checks the rule is actually live rather than assuming it. The wizard question is rephrased to something an operator can verify with their network team instead of guessing at. NON-ASCII. The style gate only ever checked .py/.vue/.js/.ts, so documentation accumulated em-dashes, arrows and box-drawing characters against this repo's own convention - including in files added this week. Cleaned, and the gate now uses INCLUDES_ALL so Markdown, JSON and YAML are covered. PLUGIN DEFAULTS. The wizard pre-ticked measuringtools and printedparts, both of which ship default_enabled=false, so every site taking the defaults installed and enabled them against their manifests. Inno has no JSON parser so the list must be hardcoded, but tests/test_installer_defaults.py now fails when it drifts. UPGRADES. The payload copy merges, so a plugin dropped from a site's profile kept its code forever - which defeats a lean build and leaves core's optional-import guards succeeding for a plugin the site no longer has. Stale plugin directories are now deregistered and removed before the copy. add-plugin used 'plugin install', which for the five default_enabled=false plugins left them installed but DISABLED - and printed a green success line anyway. It now goes through apply-profile, and the success line is gated on the exit code. Invoke-Flask records its own exit status, because $LASTEXITCODE keeps a stale value when flask.exe is missing and no native command runs. CHARSET. The utf8mb4 compiler hook lived inline in migrations/env.py, so it covered the CORE chain only: plugin baselines inherited the server default, which on a latin1 server means two charsets in one database. It is now shopdb/utils/mysql_charset.py, imported by both, and preflight reports the database's default charset. BACKUP HONESTY. The dump was described as 'all of your asset data'. Uploaded branding and floor-map images live in instance\ on disk, not in the database, so a restore from the .sql alone comes back with no map. backup now archives instance\ alongside it and says both are needed. VERSIONING. AppVersion was hardcoded at 0.9.0 while the product, the frontend and the newest tag said 0.7.0 - and 0.9.0 collides with a retired contract version. Both builders now generate version.iss from shopdb/__init__.py. Smaller: rollback overwrites .env before deleting it, as uninstall already did; appcmd unlocks are scoped to this site's location rather than server-wide, with the wide unlock as a fallback; DEVELOPMENT-SETUP says Python 3.14; the README plugin list gains printedparts; prune-schema --force is documented as first-provisioning-only; HTTPS is documented as not-the-default with the steps to add it; the DBA SQL is on the wizard's database page; the features page says unticking does not remove an installed feature; and the installer README states that bundle-lock cannot vouch for the exe itself - that needs signing or an out-of-band hash, neither of which is wired up. |
||
|
cproudlock
|
aea2905de0 |
fix(installer): stop it lying, stop it leaking, and make it findable
Nine fixes from a review of the installer against its actual audience: DT leads at sister sites who are not Windows, IIS or Python specialists and who will lean on an AI assistant to get through it. TRUTHFULNESS. The preflight was advisory - an operator read 'IIS is not installed', pressed Next, answered five more pages and the install died partway through with Python already on the box. The results page now blocks while anything is failing, repaints on every run instead of latching after the first, and offers 'Check again' so a fixed problem does not mean starting over. On failure the wizard said 'Nothing was left running', which is false in every path because the stages run with -OnFailure never: it now says the server is part-configured, that re-running is safe, and how to remove it. The final page no longer reads 'ShopDB-Flask is ready' after a failed install. SECRETS. The generated MySQL root password went to Write-Host in a process the wizard runs hidden - so nobody saw it - and stdout is forwarded into the setup log operators are told to send to support, so it was permanently recorded for everyone who did not need it. It now goes to an ACL'd file. Database dumps, which contain every user password hash, landed in a ProgramData directory readable by every user on the box; the directory is now locked at creation. UPGRADES ON REMOTE-DATABASE SITES. mysqldump was looked for only under local MySQL install paths, so a site whose database is on another host silently skipped every pre-upgrade backup - after stage 2 had already stopped the pool and replaced the tree. Find-MysqlTool now prefers a client shipped in the bundle, stage 2 stages it onto the server, preflight reports when it is missing, and mysqlclient\ is an optional locked payload. UNINSTALL. A subpath install is an IIS Application, not a site; removing only the site left the application pointing at a deleted directory, so the parent site - at West Jefferson, the live classic ASP - served 503 on that path forever while Add/Remove Programs reported success. Uninstall now reads MOUNT_PATH and removes the application. The firewall rule was created as "$SiteName $SitePort" and removed as the literal 'ShopDB-Flask 8090', which matches nothing. DAY-2 TOOLING. Every shortcut now passes -AppRoot and -SitePort, and the console forwards them through its own elevation and 32-bit relaunches instead of discarding them - a non-default directory or port made it report a healthy site as broken, from a shortcut the installer wrote. 'Open ShopDB-Flask' resolved to a hardcoded localhost:8090 that was wrong for every subpath install; it now asks the console, which reads the address the installer recorded, and no longer demands administrator to open a browser. SMOKE TEST. The parent-site port lookup filtered for an http binding and defaulted to 80, so an https-only parent site failed a working install with a red dialog. DOCS AND /api/docs. The installer was invisible: nothing in docs/, README.md or CLAUDE.md mentioned it, so a DT lead or their assistant landed on the manual IIS runbook and hand-built the very server the installer then refuses to upgrade. docs/INSTALL-WINDOWS.md and docs/OPERATE-WINDOWS.md are now the canonical route, the two manual runbooks are bannered as reference-only, README and CLAUDE.md route by target, and llms.txt tells an assistant which document to follow and to ask for 'check -Json' before diagnosing. Both ship on the server, along with openapi.json and llms.txt - without those the self-hosted /api/docs was broken on every installed box, which matters most to the sites least able to debug it. Stage 5 now checks it actually serves. shopdb-admin.ps1 gains 'check -Json': one structured, secret-free block covering version, publishing method, IIS state, HTTP reachability, database, Python version, plugins and errors. That is the cheapest useful answer to 'the operator will ask an LLM' - it works with no infrastructure, which a install-time MCP server could not. |
||
|
cproudlock
|
e58f376643 |
fix(installer): the adopt-existing guard never fired
Stage 4 decided whether the IIS objects it was about to reconcile were its own by testing for .installed-version. Stage 2 writes that file, and stage 2 always runs first in a '-Stage all' install - so by the time the guard looked, the stamp it had just written made every server look like one this installer built, including the hand-built ones the guard exists to protect. Stage 2 now records whether a stamp was present BEFORE it writes its own, and stage 4 reads that observation. Running stage 4 alone still tests the file, which is correct there: no stage 2 has run to disturb it. Found by review, not by test - the guard has no coverage, because exercising it needs a live IIS. |
||
|
cproudlock
|
3606d8d696 |
feat(sbom): ship a CycloneDX bill of materials with every build
An air-gapped site cannot be scanned from anywhere else, so when a CVE lands the only way to answer 'is that component here, and at what version' was to RDP in and go looking. The frontend was the real blind spot: nothing recorded which version of leaflet, dompurify, jspdf or html2canvas ends up inside the compiled SPA. scripts/generate_sbom.py emits CycloneDX 1.6 covering both ecosystems - every pin in requirements.txt with the sha256 the installer enforces, and every package in package-lock.json. Build-only npm packages are marked scope 'excluded' rather than dropped, so 'not here' stays distinguishable from 'not looked for'. Dependency edges are real: uv's '# via' comments give the Python graph and package-lock gives the npm one. Hand-rolled rather than cyclonedx-py plus cyclonedx-npm because both inputs are already pinned and committed - this is a format translation, not a scan - and because the build box may be a work PC with nothing but Python and Node. It is deterministic by construction: same inputs, byte-identical output, so regenerating does not churn. Staged into the application tree by both builders, so it installs onto the server with the app. shopdb-admin.ps1 verify reports it and searches it by component name, which is the question actually being asked. Packages appearing at several depths in package-lock (node_modules/vite and node_modules/vitest/node_modules/vite) are merged, and a copy reachable outside the dev tree makes the component count as shipped. Emitting both produced duplicate bom-refs, which CycloneDX forbids and scanners reject; getting the dev merge backwards would have hidden a shipped package from a CVE search. Not covered by bundle-lock.json on purpose: its provenance is git, not the third-party payload. |
||
|
cproudlock
|
1bf3cb2e1c |
feat(installer): refuse to damage an installation it did not create
Two guards for a server deployed by hand, which the West Jefferson production box is. An existing venv is reused, which is right for a repair or an upgrade of an install this made, and wrong when the venv belongs to a different Python. The wheelhouse is tagged for one minor version, so pip finds no candidate for the compiled packages and dies partway through - after Python has been installed and the application tree replaced. The two versions are now compared up front and the run stops with both numbers and what to do about it. Switching deployment method removes the other method's IIS artifact. That is correct when this installer owns both and dangerous when it does not: a wrong -MountAlias would call Remove-WebApplication on a live mount with no prompt and no error, and the first sign would be the site returning 404. It now refuses unless a version stamp shows this installer made the install, or -AdoptExisting is passed, and the refusal lists exactly what it would have removed. |
||
|
cproudlock
|
13d831eb90 |
feat(installer): require the wheelhouse to satisfy requirements.txt, and lock the real payload
The lock records what IS in the wheelhouse, not what the application NEEDS, so an incomplete wheelhouse was locked, blessed and shipped - and only failed on an air-gapped server. That is not hypothetical. Assembling the wheelhouse anywhere other than Windows silently omits colorama, a win32-only dependency of click, because pip evaluates environment markers against the machine doing the downloading rather than the machine being targeted. The bundle built here was short exactly that one wheel. Both verifiers now cross-check wheels/ against the staged requirements.txt, ignoring markers, since a requirement guarded by sys_platform == 'win32' is precisely the one that must be present. Names are normalised to PEP 427 wheel form, so mysql-connector-python matches mysql_connector_python. bundle-lock.json is the first real lock: 42 files, cp314/win_amd64 - 39 wheels, Python 3.14.6, HttpPlatformHandler 1.2 and URL Rewrite. MySQL is absent and optional; a site choosing the bundled-database option adds it and re-locks. The naming gate now skips the installer's build output. It contains a staged copy of the application plus a second SPA build under dist-subpath, which --exclude-dir=dist does not match, so a staged bundle failed the gate on vendored minified JS nobody in this repository wrote. |
||
|
cproudlock
|
44237b5cbd |
feat(installer): bundle URL Rewrite, ask where client IPs come from, verify installs
IIS does not set X-Forwarded-For on its own and HttpPlatformHandler connects from loopback, so without a rewrite rule every client reads as 127.0.0.1. The GE-Enforce IP allowlist, the dashboard visitor-location lookup and per-host login rate limiting all stop working, silently. The rule needed URL Rewrite, which the installer told operators to download - from an air-gapped server. URL Rewrite now ships in the bundle, and the wizard asks which case applies, because the two answers are mutually exclusive. Directly exposed: install it and set X-Forwarded-For from REMOTE_ADDR, which is what stops a client spoofing its own. Behind a proxy: leave the rule off, since REMOTE_ADDR is the proxy and applying it would discard the real client IP. The rule is enabled by deleting two explicit marker lines rather than by a regex over the surrounding comment, so editing that prose cannot silently disable it. An existing web.config is no longer overwritten. It is the one file on a server that legitimately carries hand-edits, and replacing it reverted them without a word - on a server where the X-Forwarded-For rule had been enabled by hand, that alone would have turned the GE-Enforce IP allowlist off. The installer reports what it found instead. pip now runs with --require-hashes and --only-binary=:all:. Hash-checking is requested explicitly rather than inferred from the lockfile, so shipping an unhashed requirements.txt fails loudly instead of quietly dropping the check. shopdb-admin.ps1 gains a verify command: which bundle this server was installed from, and whether the installed packages still match what shipped. The .iss states its compiler floor. WizardStyle uses the built-in windows11 custom style, which needs Inno Setup 6.6.0; older compilers now fail with that sentence rather than 'WizardStyle is invalid'. |
||
|
cproudlock
|
88af7fd9ce |
feat(installer): lock the third-party payload, and build on Windows without Bash
The bundle carries ~40 wheels, a Python installer and two MSIs. All of them run as SYSTEM on the target server, and nothing verified any of them. A missing wheelhouse printed MISSING and the script still exited 0, so an empty bundle compiled into a shippable installer and the failure surfaced on an air-gapped server with no way to fix it. bundle-lock.json now records that payload exactly - sha256 and byte size per file - and verification is set equality: a missing file, an unexpected extra file, or changed content all fail. Both builders check it and refuse to produce an unverified bundle; the lock ships inside the bundle and shopdb-install.ps1 re-checks it on the server before running any of it. This is deliberately a layer above requirements.txt hashes. pip lists every artifact of a pinned version (cffi 2.1.0 alone has 100 hashes), so it proves a wheel is genuine, not that it is the wheel this bundle was built and tested with; it ignores extra files in the wheelhouse; and it covers none of the executables. refresh-bundle-lock.ps1 regenerates the lock but refuses to overwrite one until the operator has seen the diff, because the commit is the review - it is the only place a change to what runs as SYSTEM becomes visible to a human. build-installer.ps1 is the whole build natively on Windows, so a work PC needs no Bash. It shares the plugin closure resolver with build-site.sh. Both builders now copy the installer scripts from the repository. They were copied from a downloads folder, so the logic that shipped was not the logic that was committed and the build worked on exactly one machine. Two verifiers exist because PowerShell is the only thing guaranteed present on the target server, while the Linux builder should not need pwsh. tests/test_bundle_lock.py runs both against the same fixtures and fails if they disagree. |
||
|
cproudlock
|
5c4fdcb15e | Merge branch 'installer-prereqs' into feat/installer-bundle-lock | ||
| 0fa5f1e910 |
feat(deploy): add the air-gapped Windows installer
Roughly 2500 lines of tested installer had been living in ~/Downloads and an untracked folder - nothing was under version control. It goes here rather than in a repo of its own because it depends on application internals: the `flask plugin` verbs, site-profile.json, MOUNT_PATH, and the plugin registry. Versioned separately it would drift out of step with the thing it installs. Contents: the read-only preflight, the staged installer (bundled MySQL, runtime, schema, IIS, verify, uninstall), the operator console, the Inno Setup wizard, the bundle builder and the artwork generator. bundle/ and Output/ are ignored - regenerable, and ~220MB. plugins.iss is ignored because build-installer.sh generates it from the staged payload. The artwork IS committed so a Windows build box does not need Python and cairosvg. Verified end to end on Windows Server 2025 against a bundled MySQL 8.0 and an existing MySQL 5.6: fresh install, upgrade with backup and rollback, re-run idempotency, uninstall, and both deployment methods including switching between them. Not yet verified: a hypervisor-level air-gapped run, and any load from a real browser (every HTTP check so far used curl, which sends no Origin header). |
|||
| 11f3d00a04 |
Installer prerequisites: REQ-D through REQ-G
REQ-D: restore waitress and tzdata to requirements.in. They existed ONLY in the
generated requirements.txt (hand-added in
|
|||
|
cproudlock
|
1ee9328bf9 |
applications: fix relative installer/link hrefs + serve /installers via IIS
Two problems with application download/launch/doc links: 1. Stored paths like 'installers/Foo.exe' are relative, so an <a href> on /shopdb/applications/6 resolved to /shopdb/applications/installers/Foo.exe. New basePath.fileHref() mounts a relative path under the app base (-> /shopdb/installers/Foo.exe) while leaving full URLs and UNC/file paths untouched. Applied to installpath, applicationlink, and documentationpath in the list and detail views. 2. Even the correct /shopdb/installers/Foo.exe 404s: httpPlatformHandler is path="*", so IIS forwards it to Flask, which has no such route. Add a web.config <location path="installers"> that clears the handler and serves that subpath as IIS static (with .exe/.msi MIME), from a physical APP_ROOT\installers folder. |
||
|
cproudlock
|
d178726687 |
ADR-013 Phase 0: plugin lifecycle groundwork
Additive, zero-risk-to-running-sites prep for the plugin catalog. No distribution or lean-build behavior yet; fixes latent bugs and adds the declarative + validate tooling later phases build on. Fixes: - upgrade_all_plugins iterates registry.get_all(); only adopted plugins are migrated. Removes the phantom hasattr(registry, 'list_installed') probe that always fell through to migrating every folder on disk (unadopted DDL ran with full DB rights on every deploy). - Reverse-dependency checks on uninstall/disable read dependencies from the manifest on disk via _installed_dependents, so an installed-but-unloaded or disabled dependent is counted. Uninstall blocks on any installed dependent; disable blocks on an enabled dependent. - _sort_by_dependencies detects a dependency cycle (back edge in the DFS) and raises PluginDependencyError instead of looping or dropping a plugin. New: - flask plugin validate <name>: manifest loads + name match, manifest-schema check, core_version admits the framework contract, declared dependencies exist on disk. No new dependency (lightweight checker); schema ships in the package at shopdb/plugins/manifest_schema.json (docs/ is stripped on publish). The check caught that provides is an object, not an array. - flask plugin apply-profile <file>: declarative install AND enable of a chosen plugin set plus its hard-dependency closure, in dependency order, idempotent. Replaces the hand-ordered runbook sequences that could enable a plugin that was never installed. deploy/site-profile.example.json template. - Dockerfile header corrected (all 13 catalog plugins, not "eleven core"). 10 new lifecycle tests (reverse-deps from disk, cycle detection, upgrade-all scope, profile closure, schema, all 13 manifests match schema). 1018 pass, naming green. |
||
|
cproudlock
|
eed947b207 |
Forward real client IPs through waitress trusted-proxy flags
The X-Forwarded-For rewrite rule alone is not enough: waitress 2+ strips forwarded headers from untrusted proxies by default, so the app still saw 127.0.0.1 with the rule active. Trust the loopback proxy and consume x-forwarded-for on the waitress command line; waitress then rewrites remote_addr to the real client. Runbook gains the allowedServerVariables unlock (500.52) and both troubleshooting rows. |
||
|
cproudlock
|
6010f01de1 |
Support subpath IIS deployment as a second install method
The app can run as an IIS Application under an existing site (e.g. https://host/ops/) instead of its own site + port: - frontend: vite base via VITE_BASE_PATH; router history, axios baseURL, and root-absolute asset/route paths resolve through utils/basePath.js withBase() - backend: MOUNT_PATH (env or .env) wraps the app in a WSGI middleware that shifts the prefix into SCRIPT_NAME, so one knob serves API + SPA under the mount - docs: INSTALL-WINDOWS-IIS.md section 7b runbook + troubleshooting rows; DEPLOY-WINDOWS-IIS.md pointer; commented examples in deploy/windows/web.config and .env.example Root deployment unchanged (MOUNT_PATH unset, base '/'). Also folds two stray root-absolute callers into the shared plumbing (MachineForm relationship-types fetch, reports CSV window.open). |
||
|
cproudlock
|
bf9e60e607 |
Windows/IIS install fixes found by validating on a real win11 VM
Deployed to win11 + IIS + MySQL 5.6 end to end; fixed what broke.
- requirements.txt: add tzdata. Windows has no IANA tz database, so
ZoneInfo('America/New_York') (notifications recognition/recert) fails and the
plugin won't import. Also confirmed waitress (added earlier) is required.
- deploy/windows/web.config: comment out the X-Forwarded-For <rewrite> block by
default - it needs URL Rewrite, and with it active but the module absent IIS
returns HTTP 500.19. Uncomment after installing URL Rewrite.
- docs/DEPLOY-WINDOWS-IIS.md: add the required `appcmd unlock config` step for
system.webServer/handlers + httpPlatform (locked server-wide by default ->
500.19 without it) and the app-pool icacls grant.
Verified: IIS -> HttpPlatformHandler -> waitress -> app on :8090, all plugins
load, admin login works.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|
||
|
cproudlock
|
78a0ee8d83 |
Add custom fields + warranty plugin, rework settings into two-pane shell
Feature work from the 2026-07 session: Settings IA - Replace the flat 27-card settings hub with a persistent two-pane shell (SettingsLayout.vue): grouped, searchable left rail + content pane. - Nest all settings/* routes under the shell via router post-processing; shared nav catalog in settingsNav.js. Group by asset class (PCs, Printers, Equipment, Network) so per-type settings stop scattering. Custom fields (core) - customfields + customfieldvalues tables (migration 7d14), CRUD API at /api/customfields, per-asset value get/save. - Settings management page + reusable CustomFieldsSection (detail) and CustomFieldsInputs (form) wired into all four asset types. Warranty (new plugin) - plugins/warranty: warranties + warrantyassets (migration 7d15), derived coverage status, provider abstraction (manual now; Dell/Lenovo/HP stubs). - API CRUD + per-asset panel + report buckets; WarrantyPanel on all four detail pages; Warranties management page; Warranty report + Reports card. - Seed warranty.* permissions. Printer drivers - printerdrivers table (migration 7d13) linked to printer models; drivers now surface on the matching printer's detail page. Other - PCDetail rebalanced (Network + Status + Warranty + custom fields on the right). - Rename PCs list "Features" column to "Remote Access"; fix badge hover underline. - Drop equipment islocationonly field. - Centralize asset-type label/route maps into utils/assetTypes.js. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
