Details tab card layout
-----------------------
The Details tab sat on .content-grid, a two-column CSS grid. Grid packs
items into implicit rows, so every row is as tall as its tallest card and
align-items:start leaves the shorter one with dead space beneath it:
Warranty is short, Endpoint Status is tall, and Policy had to wait for the
taller of the two rather than sliding up. That read as a staggered layout.
Switched that one tab to multicol via a .details-flow modifier, which has no
rows at all - each card starts where the previous one ended, so the holes
close while cards still size to their content.
Multicol is deliberately NOT applied to .content-grid globally. The note by
that rule in style.css records why it was abandoned there: a column-span:all
child (.pap-span, used by table panels) overlaps the shorter column when the
two are unequal. That cannot happen on this tab - every panel in the details
group is a keyvalue or list render, and spansFullWidth() only returns true
for table (or a tabs panel holding one), so nothing in the subtree spans.
Monitors and Service/Process DO carry table panels and stay on grid.
The modifier is scoped to PCDetail, so the nine other detail views on
.content-grid are untouched.
Chosen over JS masonry on purpose. Masonry packs perfectly but has to
measure every card and re-measure on resize, on panel collapse and on every
async panel load - and these panels fetch after paint, so it would mean
continuous forced reflow on a page that already polls. This is pure CSS:
no measurement, no observer, no runtime cost. The tradeoff accepted is that
column bottoms can end at slightly different heights.
Cards carry break-inside: avoid so none fragments across the column break,
and the 25px spacing returns as a margin because multicol has no gap between
stacked items the way grid does.
IP Configuration card
---------------------
Removed: the data has no purpose on the page anymore. Taken out at the root
rather than hidden - the panel declaration, the /asset/<id>/ipconfig route
and the _IPCONFIG_COLUMNS constant all go, since a route with no consumer is
dead surface that still answers requests.
test_the_two_cards_do_not_duplicate_columns_beyond_the_address existed only
to police the history/config column split; with one card gone it guards
nothing, so it and its import go with it. The panel-count assertion in
test_endpoints_asset_panels_are_computer_scoped moves 15 -> 14, which is the
test doing its job and catching the removal.
IP History is unchanged and still carries the address list.
Not addressed here: three tzset() tests in test_endpoints_plugin.py fail on
Windows because time.tzset() is Unix-only. Verified pre-existing against
unmodified code; they pass in the Linux container.
Mapped drives stopped reporting because the user-context path failed silently
in three separate places, and none of them left a trace to read back.
- Probe: launch via -EncodedCommand instead of staging a temp .ps1 and running
powershell.exe -File. A missing or quarantined script file fails BEFORE any
statement runs, so the script's own try/catch never sees it and the only
symptom is exit -196608.
- Spool: pin to the ShopFloor profile. Resolving it through WTSQueryUserToken
is privileged, endpoint protection blocks it, and on failure the tray
(writer) and service (reader) silently disagree about the path.
- Spool: consume after a successful parse, so a stopped tray cannot keep
re-reporting stale mapped drives as current. Unparseable files are left in
place for the next cycle.
- Logging: user-session components cannot write to Program Files or to the
SYSTEM-owned ProgramData log directory, and the file sink degrades to a
silent no-op when it cannot create its directory. Tray and probe now log to
C:\Users\ShopFloor\ShopDB\Logs, installs transcript to ProgramData, and the
sink records a SinkProblem instead of swallowing UnauthorizedAccessException.
- Installer: provision the operator spool/log directories with ShopFloor:Modify
before the tray first runs, and stop the transcript via trap so a throw
cannot orphan exactly the failed install worth reading.
- Upload cap 64 -> 128 MB: the self-contained tray publishes at ~69 MB and was
rejected on SIZE, but the size check returns before the PE is parsed, so the
operator only ever saw a version-detection failure.
AGENT-CONTRACT.md gains a normative section defining the three security
contexts, their log destinations, the fixed spool path and consume-on-read.
Agent 1.8.0 -> 1.8.1, tray 1.1.0 -> 1.1.1 so the deployed build is
identifiable from a log line.
asset_panels() rewrites any group missing from ASSET_PANEL_GROUPS to 'details' before the client sees it, and Phase 3 never added 'serviceprocess' there. Both panels were relabelled on the wire, so the tab could not appear no matter how consistent the frontend was. That is why the tab was still missing after the schema fix - a second, unrelated cause wearing the same symptom.
Operator Reports moves out of System Monitors into a tab of its own: that tab is machine-collected health, this is a person reporting something, and the thumbnail grid dwarfed the fact cards it sat between. Full width, since it is alone in the tab.
panelGroups.spec.js claimed to cover four files and checked two; it now reads the server tuple as well. The plugin test's hand-copied set was a fifth copy and now derives from the server tuple instead.
Mapped drives existed only as a comma-joined line in the user context card, which is fine for three drives and unreadable for a dozen. They now get their own list card in Monitors: one row per letter, remote path as meta, health as a badge. Reuses the statecolor/levels vocabulary the tracked-services cards already declare rather than new CSS. Only unhealthy drives are coloured. Green on every working drive makes the broken one just another badge in a row of badges, and the card exists to make the exception findable at a glance. Unhealthy rows sort first for the same reason - a user with a dozen mappings should not hunt for the broken one - and the sort is on health alone, so drive-letter order survives within each group and the list does not reshuffle between refreshes. The merge logic is untouched. _mapped_drive_rows now returns structured rows and the user-context summary line is built from them, so the card and the line cannot drift apart about a drive's status. The two silent-failure paths are mutation-tested: forcing every badge green failed 7 tests, and the first sort test passed a mutation that added a secondary key because every broken drive in it said the same word - it now uses statuses that would reorder under a text sort. Also corrects a stale warning claiming the merge is untested; it has been covered since Phase 1.
Volume capacity and physical drive health were two adjacent cards, and the operator reading a full disk is usually the operator reading a dying disk in the same minute. They are now one Storage card with two sections. Visual grouping only - the two tables share no key, storage being per volume and health per physical device, and one drive can back several volumes or none the operator sees. Nothing is reconciled across the sections; this is not the mapped-drive merge where two sources described the same drive and the worse status won. The tabs render type was the only sections-in-one-card mechanism and emitted label/value fields with no table path, so it now takes table sections too. That is the renderer every plugin uses, so both behaviour changes in it are mutation-tested. Two things only surfaced on contact: the empty-section filter had to grow a table branch, because a table section declares columns up front and dropping it when it has no rows takes its tab with it and reads as no disks rather than nothing reported; and full-width span was keyed off the declared render type, but a tabs panel holding a six-column table needs the same span and that is only knowable from fetched data. The diskhealth route stays. It no longer backs a panel, but it is a stable read for callers outside the renderer and removing it for a UI-only change would break them.
Tracked Services and Tracked Processes were sharing a tab with system health cards, so what is running on the box and how the box itself is doing read as one list. They now sit in a Service/Process Monitors tab and the old tab is System Monitors. The group vocabulary is duplicated across the renderer, the tab map and the panel declarations with nothing checking they agree, and a group named in one but not the others is dropped in silence - that has eaten cards twice. Tests now pin the vocabulary on both sides. Boot type and NIC link state were collected in Phase 2 but shown nowhere. Boot type only renders when fast startup applies, because uptime measured from a resume understates how long the kernel has been up and that is the case worth naming. Link state leaves a disconnected NIC unknown rather than half duplex: live hardware returns empty speed and duplex when unplugged, and half duplex is the cable fault signature this column exists to catch.
Every test pins a way the card could start showing a failing or unreadable drive as fine, which is the only failure mode that matters here: nobody investigates a disk that looks healthy.
Covers failure-first ordering, null predictfailure reading as unknown rather than OK, unknown outranking OK, both sources surviving for one drive, order independence, and malformed payloads. The ranking was mutation-checked: swapping the unknown and OK ranks fails the suite.
Also updates the panel count assertion, which correctly caught the new card.
_mapped_drives decides whether an operator is shown a fault, and had no tests.
Its only failure mode that matters is rendering a broken drive as working -
nobody reports a drive that looks fine, so that failure is silent by nature.
Covers the disagreement from the real capture (Get-SmbMapping OK vs net use
Disconnected), single-source drives, a missing smbmapping key entirely (the
live shape until the agent republish lands), absent status becoming Unknown
rather than blank, and malformed payload rows.
Each test was checked by mutation rather than trusted for being green. That
caught a bad one: the unrecognised-status test paired the unknown against
Unavailable, which wins on severity however unknowns are ranked, so the test
proved nothing. Pairing it against OK exposed something worse - with unknowns
ranked equal to OK the two TIE, and min() then resolves by argument order, so
the verdict depended on which source happened to report which status rather
than on severity. A drive would read healthy or broken based on enumeration
order.
Hence test_which_source_reported_a_status_does_not_change_the_verdict, which
asserts both directions of each pair. A single-direction assertion passes on
luck; asserting both is what makes an accidental tie visible. It is the test
that fails when the ranking is broken - the others stay green.
The hardware, OS and storage inventory had columns and data but nowhere to
be read: the only per-PC card was the status keyvalue, so a machine's
processor, firmware, disks and listening ports were reachable only by
querying the database.
Adds four Monitors cards - Hardware, Operating system, Storage, Listening
ports - split by the question each answers rather than by which JSON blob
they came from. OS and BIOS share one card deliberately; apart they are
three short rows each. A card yields no fields when its columns are null,
so an endpoint on an older agent hides them rather than showing a grid of
blanks.
User context is declared last on the page. The probe feeding it is not yet
producing output, so it reads empty for now, and being last means an empty
card sits below the populated ones instead of pushing them down.
The Activity feed showed a title and an event id, but the title is the
catalog name for that id - the same text on every occurrence - so two
different faults read identically. Rows now carry the provider name, and
the stored message body expands in place when the severity badge is
clicked. Commands expand to their result message, which is the reason a
failed one failed.
The badge doubles as the expander rather than gaining a control beside it,
and it keeps its severity label when open: swapping that for "Hide" would
cost the at-a-glance severity scan down the feed. Being a button rather
than a span, it is also now keyboard reachable.
map.body is additive in the shared renderer - panels that do not declare
it render exactly as before.
Uploading an agent build whose product version carried semver build metadata
(1.5.0+abcdef) was rejected, because the typed version string was validated as
a dotted-numeric value before the file was ever read. That string is only a
hint from the operator, and the build metadata it carries is not a legal
directory name for the version store.
The authority is the dotted-numeric FILE version stamped in the binary PE
resource, so validation now happens after the upload is parsed: when the typed
value is missing or not dotted-numeric, fall back to the detected version, and
reject only when neither yields a usable one.
Ben Baker's installed-software collection, software delivery (run_script and
update_app), agentless adoption tool and command-queue hardening, with his
authorship preserved.
Reviewed before promotion. Fixed: the endpoints plugin tests were never collected
by pytest, the SBOM snapshot table's key would exhaust on MySQL, ingest did not
truncate two columns strict MySQL would reject, and update_app's version branch
pinned a digest for a file that route never serves. Agent packaging moved off
require_role('admin') onto a new endpoints.agentpackage permission.
Contract 0.27.0. Full suite 2231, frontend 314.
The board was one card per source in a fixed grid: every source got the same
small box whatever it had to say (warranties showed 5 of 50), and a box per
source flattened priority, while the largest type on the page belonged to counts
that need nobody.
Now a severity rollup, one worst-first queue of everything needing a person, and
a row of context beneath. The queue is full width, capped per source so a noisy
check cannot bury a rare one, and names what did not fit with a link to it. Chips
filter the queue by check as well as by severity; both narrow what is already
loaded, so the counts and rows cannot disagree.
Dropped: an 'All assets' tile shown beside its own four addends, a printer strip
carrying the same count a third time, three cards whose job was to display 0, and
a Recent Devices table listing five machines all 'In Use'.
Contract 0.26.0 adds optional 'shortname' on dashboard cards - a title is written
as a heading and ran wider than the hostname it qualified as a row badge.
Also: the supplies card reported 'Low Supplies 0' when Zabbix was unreachable,
which reads as reassurance rather than the truth that nothing could see the
cartridges. It now distinguishes unreachable (says so) from unconfigured (stays
quiet - the site declined the feature) from a real zero.
Full suite 2182 passed, frontend 314 passed.
Thirteen commits from benjamin.baker plus the review fixes. Everything he built
is here: the endpoints plugin and its command queue, the .NET endpoint agent,
the computers policies subsystem, the site-asset CSV import with its adapters
and collector, Entra device identity, and the catalog hand-merge.
His branch predates four commits on main (section ticking, the generator share
links, Secure Send copy message, and the smoke-test workflow), so those come
through untouched - nothing of ours is removed by this merge.
wilm stays as its own branch; this does not close it.
PC records now carry Entra/Azure device identity so imported machines keep a durable link back to their directory object instead of matching on hostname alone. Adds azuredeviceid, azureobjectid, and azuredevicecategory to the Computer model with matching migrations, surfaces them read-only in PCDetail as an Entra Device Info card, and lets PCForm edit the device id directly. The computers plugin registers a machineassetnumber import hook that reconciles PC-to-machine links during bulk import and warns on unresolved or conflicting relationships.
Adds importsources adapters that normalize Azure device-group and Thor PC inventory exports into canonical ShopDB CSVs via hostname alignment, exposes register_import_hook and RowWarning on the shopdb.api contract surface (contract 0.21.0), and refreshes the Import Site Assets page with clearer source instructions. Includes reconcile_locations maintenance script and coverage for the new import paths.
Assign printers to a MACHINE and let whichever PC controls it install them, with
the observed half kept strictly apart from the assigned half: a collector report
can never write an assignment row. Adoption is explicit. Adds a singular
relationship type so defaultprinter can mean exactly one, client scripts that
converge a bay's queues and correct a drifted one in place, and a wave gate so a
fleet-wide driver rollout cannot stampede its own share.
On the container side: the compose stack never persisted the instance directory,
so a rebuild discarded plugins.json and every upload. It is a volume now, the
image ships instance/ owned by the app user so the mountpoint is writable, and
the database moves to MySQL 8.4 LTS, which the Windows runbook has recommended
since 8.0 went end of life. The image also could not build at all: the frontend
stage never copied the plugin staging script it runs.
Adds a topology migration guide covering IIS to Docker and back.
