- setup_complete site setting; a fresh admin is steered to /setup until it is
finished (skippable for the session).
- SetupWizard.vue: Site (facility/base-url/access-domain), Features (plugin
enable/disable), Floor Map dimensions, Starter Data (seed common vendors),
Finish. Reuses the settings + plugins APIs.
- setup blueprint: POST /setup/seed-starter (idempotent common vendors) and
POST /setup/complete. setupState composable drives the router redirect.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- Shared utils/apiError.js reads the correct nested error message (with
fallbacks); swept 37 views/components off the shallow path so real backend
messages (e.g. in-use 409s) surface instead of generic "Failed".
- useWarrantyBadge composable: warranty hero status/end-date badge now on PC,
equipment, printer, and network detail heroes (one shared fetch feeds the
badge + the WarrantyPanel).
- Warranties list: client-side search (vendor/level/tag/asset) + pagination;
truncate long service levels so they stop blowing out the table width.
- "Re-check all" button + POST /warranty/sync/dell?all=true to re-pull dated
Dell warranties, not just missing ones.
- Deprecate the standalone pxe-images/warranty_sync.py in favor of the plugin.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- POST /warranty/sync/dell: auto-detect Dell hardware by service tag (asset
serial) and create warranties for the ones Dell recognizes, in batches of 100.
Only looks up assets that lack a dated warranty, so re-runs are cheap and
non-Dell serials are filtered out by Dell. DellProvider.bulk_lookup batches
tags over the cached token.
- "Sync Dell" button on the Warranties page with a toast summary.
- WarrantyPanel "Add one / Add-manage" links deep-link to the warranties add
modal pre-linked to that asset (?addfor=); WarrantiesList opens it prefilled.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add a useToast() composable + a single ToastHost mounted in AppLayout. Convert
every alert() across views/components (29 call sites, all error paths) to
toast.error, and use toast.success to confirm a warranty refresh. Kills the
native "localhost says" dialog and gives consistent, dismissable feedback.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Error messages nest at data.data.error.message; the warranty handlers read one
level too shallow so every failure showed a generic "failed". Read the correct
path (with fallbacks) so the actual reason shows - e.g. Dell's rate-limit
cooldown - and confirm the pulled coverage on a successful refresh.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The API URL hint still showed the old device.warranty path; align it with the
corrected sbil/eapi/v5 endpoint the provider now defaults to.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- DellProvider: real Dell TechDirect lookup. OAuth2 via HTTP Basic auth,
asset-entitlements under /PROD/sbil/eapi/v5 (the device.warranty path 404s
for this account), map latest dated entitlement to service level + dates.
Cache the token process-wide; Dell rate-limits the token endpoint and a
fresh request per refresh trips a 401 cooldown. Verified against live Dell.
- Lenovo/HP stay config-shaped stubs.
- Settings: warranty_dell_* keys (category integrations); Dell Warranty Lookup
block in System Settings > Integrations (enable + client id/secret masked +
optional token/API URL overrides).
- WarrantyPanel takes optional pre-fetched items; PCDetail fetches once and
feeds both the panel and a new hero warranty-status/end-date badge.
- tools/mock_dell.py for offline testing of the provider flow.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Feature work from the 2026-07 session:
Settings IA
- Replace the flat 27-card settings hub with a persistent two-pane shell
(SettingsLayout.vue): grouped, searchable left rail + content pane.
- Nest all settings/* routes under the shell via router post-processing;
shared nav catalog in settingsNav.js. Group by asset class (PCs, Printers,
Equipment, Network) so per-type settings stop scattering.
Custom fields (core)
- customfields + customfieldvalues tables (migration 7d14), CRUD API at
/api/customfields, per-asset value get/save.
- Settings management page + reusable CustomFieldsSection (detail) and
CustomFieldsInputs (form) wired into all four asset types.
Warranty (new plugin)
- plugins/warranty: warranties + warrantyassets (migration 7d15), derived
coverage status, provider abstraction (manual now; Dell/Lenovo/HP stubs).
- API CRUD + per-asset panel + report buckets; WarrantyPanel on all four
detail pages; Warranties management page; Warranty report + Reports card.
- Seed warranty.* permissions.
Printer drivers
- printerdrivers table (migration 7d13) linked to printer models; drivers now
surface on the matching printer's detail page.
Other
- PCDetail rebalanced (Network + Status + Warranty + custom fields on the right).
- Rename PCs list "Features" column to "Remote Access"; fix badge hover underline.
- Drop equipment islocationonly field.
- Centralize asset-type label/route maps into utils/assetTypes.js.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The settings index showed all 6 groups stacked (still a long scroll). Switch it
to the same pattern as System Settings: a left group-tab nav showing one group's
cards at a time, plus a search box that flattens to matching cards across all
groups. Same group data, no routes changed.
Frontend-only. Build + naming green, verified.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
System Settings had grown to one long scroll (Integrations, Email, Audit,
Authentication, Asset Identifiers, Global Search, PC Type Mapping). Now a
vertical tab nav shows one section at a time, plus a search box that filters the
tabs by label/keywords (and shows every matching section while searching). Type
"toner" -> Integrations, "fqdn" -> Asset Identifiers, etc.
Frontend-only, behavior of each section unchanged. Build + naming green, verified.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The settings index had grown to 16 flat cards with no organization. Group them
into purpose-based sections (Asset Reference Data, Locations & Organization,
Network, Displays & Kiosks, System, Access & Audit) so it stays scannable as it
grows. Cards are now data-driven (one group list) instead of repeated markup;
all existing routes/cards preserved.
Frontend-only. Build + naming green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Classic feature gap: a shopfloor/lobby kiosk auto-selects which business unit to
show based on the display PC's IP (classic dashboarddefaults table +
apivisitorlocation.asp). For the main admin dashboard this does nothing - it is
kiosk/visitor-display infra.
- Model: DashboardDefault (dashboarddefaults: ipaddress unique, businessunitid
FK, description). Migration 7d01_dashboarddefaults (head).
- API (core, /api/dashboarddefaults): CRUD + GET /visitor-location that resolves
the calling display's business unit from its IP (X-Forwarded-For/remote_addr,
or explicit ?ipaddress=); unmapped IP returns a null businessunitid, not an
error. Unauthenticated resolve (kiosks); writes are admin.
- Frontend: ShopfloorDashboard auto-selects its business unit via visitor-location
on load when none is chosen; Settings > Dashboard Defaults CRUD page +
dashboardDefaultsApi client.
Tests: create + resolve by IP -> BU; unmapped IP -> null; duplicate IP 409.
191 tests pass, naming green, app boots, endpoint + admin page verified live.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Extends the computers collector so it can replace the classic api.asp
updateCompleteAsset path that the shopfloor PC fleet uses to auto-update data.
Collector schema (project naming) now accepts the GE-Enforce/enrollment shape:
machinenumber, pctype, pcsubtype, serialnumber, loggedinuser, lastboottime,
lastcheckin, ipaddress, vendorname, modelnumber, osname, installedsoftware.
- machinenumber -> Asset.assetnumber (skips the 9999 imaging placeholder, falls
back to hostname), on create and update.
- pctype -> ComputerType via a configurable mapping (see below).
- vendor/model created if missing (free vocab); OS looked up (controlled, warns
if unknown); pcsubtype accepted but not yet stored (warning).
- Dropped per scope: VNC/WinRM flags, warranty, DNC config, multi-NIC.
Configurable pc-type mapping (the gea-shopfloor-* imaging taxonomy ->
ComputerType): defaults + resolution live in plugins/computers/pctypemap.py
(plugin domain, contract-pure - reads Setting via shopdb.api); overrides stored
as pctypemap_<pxetype> settings, seeded on plugin install, edited in Settings >
System > "Collector PC Type Mapping" (new UI section).
Migration doc: docs/COLLECTOR-INTEGRATION.md maps classic api.asp fields +
GE-Enforce status fields to the collector schema, documents machine-number
sourcing (registry MachineNo first, then C:\Enrollment\machine-number.txt) and
that the transport is interim.
Tests: complete-asset payload maps machinenumber/pctype/vendor/model/os; 9999
placeholder falls back to hostname. 186 tests pass, naming green, app boots,
mapping UI verified.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Lets an admin choose which content types appear in global search results,
independent of whether the owning plugin is enabled (the existing
_require_enabled gating was all-or-nothing per plugin).
- settings.py: SEARCH_DOMAINS const (9 result types: application, knowledgebase,
employee, equipment, computer, printer, network_device, notification, subnet)
+ seed keys search_<type>_enabled (boolean, default true) in
build_default_settings (covers API seed + CLI).
- search.py: global_search loads disabled types in one query (category 'search')
and filters the deduped results by type before counts/truncation. Missing key
= enabled.
- SystemSettings.vue: "Global Search" section, one toggle per domain (mirrors the
identifier pattern; create-on-404 fallback so an un-reseeded deploy still works).
- Tests: domain included by default, disabled domain excluded, seed creates the
9 keys.
166 tests pass, naming green, build green. Verified live: toggling
search_knowledgebase_enabled off drops knowledgebase from search counts and back
on restores it. Dev DB seeded (9 keys).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Verification audit (re-run of the 6 skill lenses) confirmed the prior fixes hold
and surfaced a few misses:
Security (HIGH):
- search.py _check_smart_redirect still opened a raw pymysql connection with
root/rootpassword (reachable on any 9-digit SSO query). Now uses the shared
env-backed employee_connection helper.
- Deleted dead shopdb/core/services/employee_service.py (zero importers; carried
another root/rootpassword literal). No hardcoded credentials remain in app
logic; config.py dev defaults stay gated by ProductionConfig.validate.
Dead hook:
- get_services was implemented by the printers plugin but had no consumer (docs
claimed otherwise). Added PluginManager.get_service(name) that resolves a
service from enabled plugins; updated PLUGIN-HOOKS.md.
Tests:
- search disabled-plugin exclusion (the high-value gap): enabled plugin's
hostname appears, disabled plugin's hostname drops out (searched by a hostname
distinct from assetnumber so only the gated domain can match).
- get_service consumer test (unknown name -> None).
Simplify:
- Extract the triplicated GE_LOGO_SVG + loadLogo + drawLogoOverlay into shared
frontend/src/views/print/qrLogo.js (renderQrDataUrl); both QR views use it.
- applications.py: lift the misplaced pagination import to the top; drop unused
Computer unpacking in the 3 endpoints that only touch ComputerInstalledApp.
154 tests pass, naming/style green, app boots, QR render verified.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- USBLabelBatch.vue: recolor controls/selection/cell borders to the app CSS
variables (was hardcoded #667eea/#28a745/#dc3545) and add
`print-color-adjust: exact` so barcodes print even with "Background graphics"
off. (Barcodes render as vector SVG, so no canvas->img change needed.)
- ADR-004: document the resolved migration strategy - single core Alembic chain
(`flask db upgrade`), bundled plugin schema folded into core (7c04), resolving
the Phase 7B per-plugin-chain conflict footgun. External plugins may still
ship their own chains.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
QR codes were drawn to live <canvas> elements, which print unreliably (often
blank in the printout). The print pages also used hardcoded off-brand colors
(#667eea indigo) instead of the app's palette.
- PrinterQRBatch.vue + PrinterQRSingle.vue: render each QR (with the GE
monogram composited in) to a data-URL <img> instead of a live <canvas>.
Images print every time.
- Add `print-color-adjust: exact` so the browser prints the QR images and
borders even when the user's "Background graphics" option is off.
- Cache the GE logo image once instead of reloading it per code.
- Recolor controls/buttons/selection/label borders to the app CSS variables
(--primary, --success, --danger, --bg-card, --text...), so the pages match
the scheme and adapt to dark mode. Printed labels stay black-on-white.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The identifier-flags composable fetched settings once and cached them in a
module singleton, so toggling an identifier in Settings (gauge/maintenance/FQDN
per asset type) did not take effect on already-open asset views until a full
page reload. Disabled identifiers kept showing.
- identifierSettings.js: extract applySetting/fetchFlags; export
reloadIdentifierFlags() and setIdentifierFlag(name, assettype, enabled) to
mutate the shared reactive state.
- SystemSettings.vue: push each successful matrix toggle into the shared state
via setIdentifierFlag so dependent views react immediately.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Optional asset identifiers (gauge lab reference, maintenance reference, FQDN)
were global per-identifier and only surfaced on equipment. Now they are
toggleable per asset type and rendered on every asset type.
- settings: replace 3 global identifier toggles with a per-type matrix. New
keys identifier_<name>_<assettype>_enabled (3 identifiers x 4 types).
IDENTIFIER_LABELS / IDENTIFIER_ASSETTYPES constants drive the seed (API seed
and CLI seed settings).
- composable: identifierSettings now exposes isEnabled(name, assettype),
per-type flag winning over the legacy global key, defaulting on.
- backend writes: computers, network, printers asset create + update now
accept gaugelabreference and maintenancereference (equipment already did).
Reads already flowed through Asset.to_dict.
- frontend: Settings page renders an identifier x asset-type toggle matrix.
Equipment, PC, printer, network forms and detail pages show gauge/maintenance
(and FQDN where applicable) gated by isEnabled(name, type).
Legacy global identifier_<name>_enabled keys are still honored as a fallback
for older installs. SystemSettings toggles upsert (create on 404) so a deploy
that has not re-seeded still works on first toggle.
144 tests pass, naming/style check green, frontend builds. Verified live:
matrix renders, PC form shows the fields, PUT persists gauge/maintenance on a
PC and reads back.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
GET /api/plugins now lists all discovered plugins (enabled or not) with status;
PUT /api/plugins/<name> toggles enabled (persists to plugins.json). New
Settings > Plugins admin page with per-plugin toggles. Route changes apply on
next restart. Replaces CLI-only enable/disable for self-serve admin.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
On a new PC, the PC Number (assetnumber) auto-fills from the serial number as
it is typed, but stops auto-filling once the user edits it manually. Edit mode
never auto-overwrites.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
PCs are identified by hostname (the primary identifier) with serial as the
fallback; the assetnumber is seeded from hostname rather than a separate
"PC Number" field. PC list shows Hostname/Serial (Asset Tag column removed),
PC detail title leads with hostname.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- New locationtypes lookup (LocationType model) seeded with section, cell,
subcell, operation, meetingroom, lab, office, storage, hallway,
networkcloset, building.
- locations gains locationtypeid + parentlocationid (self-FK) for the site
location tree. Migration 7c03; cli reference-data seeds the types.
- GET /api/locations/types; locations CRUD accepts type + parent; list/detail
return locationtypename + parentlocationname.
- Locations settings page: Type column + Type/Parent selectors in the modal.
Realizes the operation-as-Location model (operations are locations with
locationtypeid='operation').
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Add applications.isrequired (model + migration 7c02 + create/update + form
checkbox). The software-compliance report compared required apps against
installs but no such flag existed, so it 500'd; now it works.
- Repair relationshiptypes rows with 0000-00-00 createddate/modifieddate
(partof/connectedto) to real timestamps.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The asset/computer model is now the single source of truth. Remove the Machine
instance layer end to end:
- Delete models Machine, MachineStatus, PCType, MachineRelationship,
InstalledApp, PrinterData; keep MachineType (models.machinetypeid still
references it).
- Delete the /api/machines, /api/statuses, /api/pctypes blueprints and the
legacy /api/printers/legacy (PrinterData) blueprint.
- Drop the deprecated communications.machineid column and its FK.
- Migration 7c01 drops tables machines, machinestatuses, pctypes,
machinerelationships, installedapps, printerdata (idempotent).
- Fix remaining readers (applications install counts) to ComputerInstalledApp.
- Frontend: remove dead machinesApi/statusesApi/pctypesApi wrappers; repoint
the PC Types settings page at computer types.
143 tests pass; all asset/computer/dashboard/report/collector endpoints 200.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- applications.py installed-on + per-computer install/uninstall/update endpoints
now use Computer / ComputerInstalledApp instead of Machine / InstalledApp.
- ApplicationDetail "Installed On" list reads the computer shape.
- Drop the unused Machine/MachineType import from the assets map endpoint.
No active core endpoint uses the Machine model anymore (only the legacy
/api/machines blueprint and reference-data seeder remain).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Add /api/assets/relationshiptypes (GET/POST) serving RelationshipType; point
relationshipTypesApi at it instead of the legacy /api/machines blueprint.
- Dashboard recent-devices widget reads assetsApi.list (asset shape) instead
of machinesApi.
No frontend code references machinesApi anymore.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Last form still reading /api/statuses (MachineStatus); repoint to
assetsApi.statuses so its status dropdown matches the rest of the app.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Dedicated assets.gaugelabreference and assets.maintenancereference columns
(distinct from assetnumber), surfaced on equipment. Add global per-identifier
enable/disable settings (gauge/maintenance/FQDN) read via a shared composable
and toggled in System Settings.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Lock the position-resolution columns from ADR-001 in code so
resolve_asset_position's relationship walk activates.
Schema
- Asset.mapleft -> Asset.mapx, Asset.maptop -> Asset.mapy
- Location.mapx / Location.mapy added (fallback for priority 3 of the
ADR-001 resolution chain)
- AssetRelationship.label (free-text nuance per ADR-001)
- AssetRelationship.inheritsposition (bool, server_default true, controls
whether the resolved-position walk follows the edge)
- RelationshipType.propagatesthroughid (self-FK; sibling-propagation rail)
Seeds
- Three canonical ADR-001 relationship types created idempotently:
partof, controls, connectedto
- controls.propagatesthroughid wired to partof (partof + connectedto stay
null per ADR-001 table). Both via Alembic migration AND CLI seed command
so a fresh test fixture and a sister-site deploy both end up correct.
- Legacy connection types (Serial Cable, Direct Ethernet, USB, WiFi,
Dualpath) retained for backward compat with pre-1.0 relationship rows.
Resolver
- shopdb.api.resolve_asset_position now walks inheritsposition=true edges
of type partof (then controls), recursively, depth-capped at 3 with
visited-set cycle protection. Inactive edges + non-inheritable types
are skipped. Falls through to the existing location fallback when the
walk yields nothing.
Tests
- 11 new test_api_namespace cases cover: partof walk, controls-after-
partof ordering, connectedto skipped, inheritsposition=false skipped,
recursion, cycle break, depth-3 cap, self-beats-related, related-beats-
location, inactive-edge skip.
- 111 tests pass. Naming/style check green.
Migration
- migrations/versions/7a01_adr001_position_contract.py:
- alter_column renames on assets (no data loss)
- add_column on locations + relationshiptypes + assetrelationships
- idempotent seed of three ADR types + propagation FK wire-up
- downgrade reverses + best-effort deletion of seeded types that have
no FK refs
Backend rename (mapleft/maptop -> mapx/mapy)
- shopdb/core/api/assets.py
- plugins/{computers,equipment,network,printers}/api/...
- scripts/migration/migrate_assets.py
- Legacy Machine model + machines API + import_from_mysql.py UNCHANGED
(per ADR-001 Machine retires; not part of the asset contract)
Frontend rename
- frontend/src/components/ShopFloorMap.vue
- frontend/src/views/{MapEditor.vue, pcs/{PCDetail,PCForm}.vue,
printers/{PrinterDetail,PrinterForm}.vue,
machines/{MachineDetail,MachineForm}.vue,
network/NetworkDeviceForm.vue}
- Form field labels + v-model bindings + computed flags switched in
lockstep with the backend.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
System Settings:
- Add SystemSettings.vue with Zabbix integration, SMTP/email config, SAML SSO settings
- Add Setting model with key-value storage and typed values
- Add settings API with caching
Audit Logging:
- Add AuditLog model tracking user, IP, action, entity changes
- Add comprehensive audit logging to all CRUD operations:
- Machines, Computers, Equipment, Network devices, VLANs, Subnets
- Printers, USB devices (including checkout/checkin)
- Applications, Settings, Users/Roles
- Track old/new values for all field changes
- Mask sensitive values (passwords, tokens) in logs
User Management:
- Add UsersList.vue with full user CRUD
- Add Role management with granular permissions
- Add 41 predefined permissions across 10 categories
- Add users API with roles and permissions endpoints
Reports:
- Add TonerReport.vue for printer supply monitoring
Dark Mode Fixes:
- Fix map position section in PCForm, PrinterForm
- Fix alert-warning in KnowledgeBaseDetail
- All components now use CSS variables for theming
CLI Commands:
- Add flask seed permissions
- Add flask seed settings
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix equipment badge barcode not rendering (loading race condition)
- Fix printer QR code not rendering on initial load (same race condition)
- Add model image to equipment badge via imageurl from Model table
- Fix white-on-white machine number text on badge, tighten barcode spacing
- Add PaginationBar component used across all list pages
- Split monolithic router into per-plugin route modules
- Fix 25 GET API endpoints returning 401 (jwt_required -> optional=True)
- Align list page columns across Equipment, PCs, and Network pages
- Add print views: EquipmentBadge, PrinterQRSingle, PrinterQRBatch, USBLabelBatch
- Add PC Relationships report, migration docs, and CLAUDE.md project guide
- Various plugin model, API, and frontend refinements
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Search: refactor into modular helpers, add IP/hostname/notification/
vendor/model/type search, smart auto-redirects for exact matches,
ServiceNOW prefix detection, filter buttons with counts, share links
with highlight support, and dark mode badge colors.
Map: fix N+1 queries with eager loading (248->28 queries), switch to
canvas-rendered circleMarkers for better performance with 500+ assets.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add equipmentApi and computersApi to replace legacy machinesApi
- Add controller vendor/model fields to Equipment model and forms
- Fix map marker navigation to use plugin-specific IDs (equipmentid,
computerid, printerid, networkdeviceid) instead of assetid
- Fix search to use unified Asset table with correct plugin IDs
- Remove legacy printer search that used non-existent field names
- Enable optional JWT auth for detail endpoints (public read access)
- Clean up USB plugin models (remove unused checkout model)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
New Plugins:
- USB plugin: Device checkout/checkin with employee lookup, checkout history
- Notifications plugin: Announcements with types, scheduling, shopfloor display
- Network plugin: Network device management with subnets and VLANs
- Equipment and Computers plugins: Asset type separation
Frontend:
- EmployeeSearch component: Reusable employee lookup with autocomplete
- USB views: List, detail, checkout/checkin modals
- Notifications views: List, form with recognition mode
- Network views: Device list, detail, form
- Calendar view with FullCalendar integration
- Shopfloor and TV dashboard views
- Reports index page
- Map editor for asset positioning
- Light/dark mode fixes for map tooltips
Backend:
- Employee search API with external lookup service
- Collector API for PowerShell data collection
- Reports API endpoints
- Slides API for TV dashboard
- Fixed AppVersion model (removed BaseModel inheritance)
- Added checkout_name column to usbcheckouts table
Styling:
- Unified detail page styles
- Improved pagination (page numbers instead of prev/next)
- Dark/light mode theme improvements
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Flask backend with Vue 3 frontend for shop floor machine management.
Includes database schema export for MySQL shopdb_flask database.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
