- Copy the whole webapp/ tree (minus __pycache__) in build-usb.sh and
build-proxmox-iso.sh, so config, services/, views/ and
blancco_evidence_monthly.py reach the server.
- sfdisk --append failure now aborts; the CIDATA partition is the one
starting exactly at the computed sector, and nothing that starts
before it is ever formatted (the old fallback hit the ISO's EFI
partition).
- Volume id and El Torito load sizes come from the ISO
(xorriso -report_el_torito as_mkisofs); grub.cfg must contain
autoinstall after patching.
- --image FILE SIZE|auto builds the same layout in a file without root
(mkfs.vfat -C + mtools, sfdisk on the file). Plus --payload-root,
--skip-enrollment/-bios/-drivers/-boot-tools, --yes.
- tests/vm: libvirt harness (pxetest-server, pxetest-client, isolated
pxetest-imaging network) with fetch-iso/build-image/create/start/
status/stop/destroy.
Every server has an imaging NIC (static, the only one that serves
DHCP/TFTP/HTTP boot/SMB) and a GE corporate NIC (DHCP client, SSH and the
webapp on 9009). The playbook guessed the PXE NIC and the installer put
172.16.9.1/24 on every en* NIC, so a two-NIC box could answer on the GE
network.
- New per-site vars pxe_nic_mac / corp_nic_mac (required, from
playbook/site-vars.yml or -e; template site-vars.example.yml), stable
names pxe_nic_name / corp_nic_name (default pxe0 / corp0, overridable),
pxe_server_ip, pxe_subnet, DHCP range. pxe_imaging_mac / pxe_ge_mac are
derived from them. The play stops before touching anything if a MAC is
unset, malformed, duplicated or not on the box (lists the box's NICs).
- Heuristic NIC detection and the single-NIC netplan task replaced by a
two-NIC netplan template (match macaddress + set-name), installed by
pxe-netplan-apply.sh: validate in a scratch root, back up, generate,
rename, apply, restore the previous config on any failure. cloud-init
network config disabled so it cannot rewrite it.
- dnsmasq: /etc/dnsmasq.d/pxe-nic-only.conf from the vars (interface=,
except-interface=, no-dhcp-interface=); dnsmasq.conf IP/range from vars.
- UFW per interface: imaging NIC 22, 67/udp, 69/udp, 80, 4433, 445, 139,
137/udp, 138/udp, 9009; GE NIC 22 and 9009 only. Old any-interface rules
and the stale 9011 rule removed after the new ones are in.
- sysctl drop-in: IPv4/IPv6 forwarding off; ip_nonlocal_bind so Apache
can bind the imaging IP before the address is up.
- Samba [global]: interfaces = 127.0.0.0/8 <imaging NIC>, bind interfaces
only. Apache 80 and 4433 on the imaging IP only; 9009 stays on all (TODO:
the webapp has no auth).
- autoinstall: DHCP only on en*, no static 172.16.9.1; apt geoip off and
offline-install fallback now that the corp NIC may have a lease.
- Blancco UEFI/Secure Boot: blancco_kver (7.0.0-34-generic) drives the
kernel, initramfs and modules builds instead of the running kernel;
outputs vmlinuz-ubuntu-70, kexec-initrd-70.img, kmod-<kver>.tar.gz as the
menu and blancco-init.sh expect; creates: guards keyed on the full kver.
Ubuntu's shimx64.efi.signed published as blancco/shimx64.efi.
download-packages.sh adds shim-signed, linux-generic-hwe-24.04 and the
pinned linux-image/modules/modules-extra for BLANCCO_KVER.
Rendered with the live MACs and names, netplan generate output is
identical to the live config; pxe-nic-only.conf and the Samba binding
match live directive for directive.
A PC whose imaging failed and is re-imaged gets the same IP, and the
server still held state from the dead run, so net use failed (System
error 53). The April fix (18537ac) did not cover it:
- The dnsmasq hook only acted on 'add'/'del'. A re-image comes back to the
existing lease, which dnsmasq reports as 'old', and only when the
hostname/MAC changed. Now dnsmasq sets script-on-renewal, and the hook
clears state on 'old' when the request comes from PXE firmware or iPXE
(vendor class PXEClient), i.e. the machine just network-booted. A
Windows lease renewal (MSFT 5.0) is left alone.
- The 1 h conntrack timeout never applied after a reboot: systemd-sysctl
runs before ufw loads nf_conntrack, so the keys did not exist and the
5-day default stayed. /etc/modules-load.d/pxe-conntrack.conf loads it
first.
- smb-soft-reset.sh flushed neighbours on br-pxe, which no longer exists.
Live 2026-10-14. Hook tested on the server with an unused IP: network-boot
renewal clears, Windows renewal and no vendor class do not, add clears.
pxe-nic-check classifies each NIC from what it hears: LLDP/CDP/802.1X
from managed switches, foreign DHCP offers and their domain (one
DHCPDISCOVER on the imaging NIC; the GE NIC's networkd lease is read
instead), STP and ARP hosts for information. A kernel BPF filter keeps
bulk SMB traffic out of the capture loop; bridge ports are listened on
too, since LLDP and EAPOL stop at the port.
- dnsmasq drop-in runs --guard as ExecStartPre: exit 1 on a ge or
foreign-dhcp imaging verdict, fail open (loudly) on bugs or no link
- pxe-nic-check.timer runs --watch every 5 min: stops dnsmasq on a bad
imaging verdict, never starts it
- /run/pxe-nic-status.json (0644, atomic) for the webapp
- playbook installs it all and writes /etc/pxe-server/nic.conf from
pxe_imaging_mac, pxe_ge_mac, pxe_corp_domain_suffixes,
pxe_nic_allowed_switches
- unit tests plus a no-root network-namespace lab (veth pairs, a raw
socket DHCP/LLDP peer and real dnsmasq); docs/pxe-nic-guard.md has the
operator notes and the two floor tests
a94c203 added a RunSynchronous Path of 417 chars to both std/eng answer
files. Windows caps it at 259 and then rejects the WHOLE answer file, so
an Engineer build stopped at 'Windows could not parse or process unattend
answer file'. The live files were restored to their pre-a94c203 versions
the same day.
- The status steps now fit: Send-ImagingStage.ps1 -Persist copies itself
out of C:\Deploy (no cmd copy chain), short PowerShell switches, default
arguments left out. Longest Path is 168 chars; lint-unattend passes.
NOT deployed: these files must go live only through deploy-unattend.sh.
- scripts/deploy-unattend.sh: the only route for an answer file to a PXE
server. Lints first and refuses on any error, backs up, swaps
atomically, lints the live copy and restores the backup if that fails.
- .githooks/pre-commit (git config core.hooksPath .githooks): refuses a
commit whose staged unattend fails the linter. Verified by planting a
352-char Path (blocked) and against the exact a94c203 file (rejected).
- Boot menu: also accept SecureBoot read as hex 01, and show the raw values
in the warning so a wrong read can be diagnosed from the screen.
- winpe-status-push.ps1: check-bios.cmd stages the firmware update before
the imaging menu, but startnet's 'BIOS firmware update' push only comes
at the end of WinPE, so builds showed a plain 'Applying image' for the
whole apply. The first push now reports the staged update when
X:\bios-fired.flag exists, and the floor shows 'Applying image - BIOS
update staged' (do not power off during the next reboot). Also: CIM
fallback for the serial where wmic is missing, and standard/engineer
always report 5 steps.
- Network pill: cdc_ncm (e.g. the WisdPI RTL8157 5G adapter) keeps link
speed in a 32-bit bits/s field, so 5 Gb/s reads 705 Mb/s; show the real
speed with a note.
Tested in the win11 VM (with and without the BIOS flag, and the late
startnet push).
A 'Network' pill next to 'Services' lists each physical NIC with its role
(imaging / GE network, from /etc/pxe-server/nic.conf or dnsmasq's
interface= pin), link, speed, addresses, and whether dnsmasq serves
DHCP/PXE on it. It reads pxe-nic-check's verdict file
(/run/pxe-nic-status.json) when present, and shows a red banner when the
imaging NIC is on the GE network or a network with another DHCP server,
or when dnsmasq answers DHCP on a non-imaging NIC. Without the file it
shows link and addresses only. Read-only.
Live since 2026-10-14 for every client (all UEFI clients now run iPXE 2.0):
- WinPE skips the 'Secure Boot must be ENABLED' warning and its 5 s wait
when iPXE reads Secure Boot as on (${efi/SecureBoot:uint8}); otherwise,
or on an iPXE that cannot read it, it warns as before.
- Blancco and Blancco debug start through Ubuntu's shim (iPXE shim
command), so they run with Secure Boot on; an iPXE without the command
boots the kernel directly as before. The separate Secure Boot TEST entry
is gone.
- Blancco has its own menu section; only Clonezilla and Memtest stay under
'Secure Boot must be DISABLED'.
The playbook now installs playbook/ipxe/GetPxeScript.aspx instead of an
inline copy that had drifted from the live menu. Checked that the Blancco
Releases page still parses it (one item blancco, :blancco_efi block).
Live since 2026-10-14: dnsmasq hands every UEFI client ipxe-shim.efi
(iPXE's shim, dual-signed under Microsoft UEFI CA 2011 + 2023), which
loads ipxe.efi from the TFTP root, now the iPXE v2.0.0 snponly build
(firmware network and USB drivers; the full build kills USB keyboards).
The per-MAC test tags and folders are gone; the old Broadcom-signed
1.21.1 build stays as ipxe-bcm.efi, the rollback.
- playbook: pinned sha256 vars, the new dnsmasq default line, and a
verified, non-optional task that installs ipxe-shim.efi, ipxe.efi
(snponly), ipxe.pxe and ipxe-bcm.efi (was: copy ipxe.efi and the never
served undionly.kpxe, errors ignored).
- scripts/fetch-ipxe.sh downloads the pinned tarball and shim into
boot-files/ for the USB build; README/SETUP list the step.
- iPXE page: ipxe.efi is staged from snponly.efi, a build that drives USB
itself is refused, and the snponly-shim/snponly root files are gone.
Tested: the playbook task against the real release files (installs the
live hashes; a tampered file stops it before anything is replaced),
ansible --syntax-check, staging, and the full-build refusal.
The floor's 8 stages are the shopfloor pipeline, and only shopfloor-setup
reports after WinPE, so every gea-standard / gea-engineer build sat at
1/8 forever with no type.
- winpe-status-push.ps1 reads the image from the Z: share mapping when no
PCTYPE is set and reports those builds as 5 steps.
- Send-ImagingStage.ps1 (deployed to _shared\Applications\extra\pxe-status)
posts steps 2-5 from the unattend: start and end of specialize, first
logon, and setup complete (succeeded). It is copied to
C:\ProgramData\PxeStatus first, because the bulk-enrollment task deletes
C:\Deploy before first logon. Best-effort: always exits 0.
- Floor rows use Standard/Engineer labels and show the image as the kind.
Tested as SYSTEM in the win11 VM (PowerShell 5.1): the exact unattend
command line, stages 3-5 against a test server, a dead port (exit 0), and
the image regex.
Staging fetches ipxe-shimx64.efi from the ipxe/shim release (sha256 from
GitHub), and uses it instead of the tarball's 2011-only shim when it is
signed under the Microsoft UEFI CA 2023 and trusts the same iPXE CA;
otherwise the tarball shim stays, with the reason shown. snponly.efi and
snponly-shim.efi are managed alongside ipxe.efi and ipxe-shim.efi, each
iPXE build says whether it drives USB itself (kills USB keyboards), and
tftp-unique-root per-MAC folders are listed read-only.
Evidence pack gets a Last 3 months quick range (three full calendar
months). Opened menus are nudged back inside the window, so header
popovers no longer start off-screen on phones or a wrapped header.
Buttons and filter pills inside a menu keep their own styling.
Evidence pack takes ?from=&to= (inclusive, Eastern time) with From/To
pickers and quick ranges; ZIP is named ENT-056_<site>_<from>_to_<to>.
Month keys show as 'September 2026'. Hardware gap rows on the to-do
use the shared one-line grid with chips for the missing pack or BIOS.
From the design review:
- Floor rows reserve 150px for actions instead of 190px; stage text is
one line with the full text in a tip (safety text still wraps); the PC
type hides first; rows stack only below 960px of panel width, with the
actions on the status line instead of their own row.
- Tips also show on keyboard focus.
- Placeholders use the muted token (dark-theme contrast was 3.6:1).
- Save bar focus ring uses the save bar's accent (2.8:1 before).
- Unattend: a command's '...' menu stayed open after Move up/down and
covered the next row's menu, so the next click could stage removing the
wrong command. The menu now closes and focus returns to its button.
- '...' menus close on an outside click, on Escape and when another
opens (static/app.js), for every page.
- Drivers: Remove asks to confirm again, as before the redesign. Long zip
paths in a row body wrap (the page scrolled sideways at 390 px).
- Rollback review returns to the page it was opened from (Dell page or
Updates overview), for both Cancel and the rollback itself.
- To-do: the ServiceNow period offers a year again (366 days).
- Imaging floor: a search that matches a log-only bay opens that group;
its open state survives the live refresh. 'Clear all' states the
number of session files it deletes, hidden finished ones included.
- Dashboard: the image key pattern is valid under the browser's v flag
(client-side validation was silently skipped).
- Import: allowed_import_source() compares real paths, so
'<upload dir>/../..' is refused. This path traversal predates the
redesign; the import moves the source tree, so it mattered.
Blocker
- /reports/export returned 500: REPORT_EXPORT_RANGES and _months_ago were
deleted with the old reports route. Restored.
Major
- A session without stage_index/stage_total took down /, /imaging and
/imaging/tiles (int filter on Undefined). The templates default both;
saving a LAPS password for a session that no longer exists is refused
(it created a bare session).
- /reports/todo parsed every report four times (23 s at 700 reports).
blancco_report.parse() now caches by path, mtime and size: 0.09 s.
- Stored XSS through the session serial in the Clear confirm (the
browser decodes ' before running an inline handler). The message
moves to data-confirm, and update_session() only accepts serials of
letters, digits, '.', '_' and '-' (400 from /imaging/status otherwise).
- Reports without a document id and with odd characters in the file name
got a key the mark routes rejected, so they could never be cleared.
report_key() now always produces a valid key.
Minor
- failure_note() handles a list-valued erasure target (500 on the report
and to-do pages).
- _recently_marked() tolerates naive, 'Z' and non-dict state entries.
- Key regexes use fullmatch (a trailing newline was accepted).
- Unreadable reports are no longer counted as to tick / to destroy; the
reports page already flags them as Unreadable.
- Rollback review recounts restorable files after reading the backups.
- Enrollment: the startnet fallback package (no or empty ppkg.conf) and a
quoted SOURCE_PPKG are protected too.
- Backup upload overwrite check is case-insensitive (SMB share) and
replaces the existing file rather than adding a case twin.
- Overview polling keeps the last good rows on an error and pauses while
the tab is hidden. A shown or typed LAPS password survives the floor's
refresh.
- hardware_dismiss only redirects to same-site paths; tiles ?limit is
clamped; the Updates overview survives an unreadable Dell scan or iPXE
state; describe() uses aversion(); a client cannot label its session
'inferred'.
Restyled to the same row pattern (one line, details in an expandable
body, one action plus a menu, tokens for light and dark):
- hardware coverage, audit log (family chips, destructive actions in
red, client-side filters, first 300 rows), Clonezilla backups,
enrollment packages (active package marked and undeletable, MCL flags
with a visible legend)
- image Overview, OS and packages, Unattend (sticky save bar), Import
- Dell, iPXE, Blancco and BPRT update pages; Dell history links to the
rollback review instead of rolling back on one click
- boot menu editor (tabs, rows with a menu, lint chips that jump to the
line, tokens instead of hard-coded dark colours) and the imaging
session detail page
Fixes found on the way:
- BPRT batch Activate never asked to confirm: a hidden input named
'confirm' shadowed window.confirm in the inline handler, so the form
submitted without a prompt. It now calls window.confirm.
- Backup upload refused when a backup with that name exists, unless
'Replace the existing backup' is ticked (it overwrote silently).
- app.js: em dashes in comments replaced (plain ASCII).
Reports (/reports):
- Grouped by month of the erasure date inside each report (not the file
date), newest first; older months fold. Each month header shows the
evidence pack state (builds on the 1st, to upload with Download, or
uploaded).
- One line per report: erasure date, system serial, model, drives,
result ('Successful, fallback' when a failed attempt fell back to
another standard), cloud and ServiceNow state. The row body lists every
drive and erasure attempt with the failure reason.
- Search by system serial, model, drive serial or file; filters for
failed, not in cloud and to tick. 'To tick' uses the to-do's 30-day
window; older unticked reports read 'Not ticked'.
- Export and the evidence pack download moved into header popovers.
Report (/reports/view/<file>):
- Header with serial, model and the per-drive result; a notice names
the drive to destroy until its COD is recorded; Copy ServiceNow note.
- One card per drive with every attempt, a step track and the failure
reason; steps and error counts fold. System, customer and provenance
(integrity signature folded, copyable) on the side. Sizes in decimal
units, as on the list.
- blancco_evidence.failure_note() is shared with the ServiceNow list.
To-do (/reports/todo):
- The ServiceNow tick list is now its first section (period and show
ticked filters); /reports/servicenow redirects there.
- Five counters; one line per item with details in the row body.
- COD recorded, Mark uploaded and Resolved confirm first (the attribute
quoting is safe for JSON) and can be undone for 24 hours from the
page. The header total includes hardware gaps, matching the sidebar.
- GET /updates/: one card per updater (Dell, iPXE, Blancco, BPRT) with
its state, a Check now / Open action and details in accordions; the
shared download cap is a small popover.
- Dell applies list: one line per apply titled by its first change
('Latitude 5350 pack A11 to A12', model looked up in the maps) and
'and n more'; the chip says how many written files are unchanged since
the apply. The body lists every change, skipped item, error and file.
- dell_updates.file_status(): per file an apply wrote, unchanged /
changed / missing by content hash, the same test rollback uses.
describe(), history_view() and rollback_preview() build on it.
- GET /updates/dell/rollback/<id>: review a rollback before doing it,
with the files that would be restored and a diff of each. The POST
route is unchanged; both forms can return to the overview.
- One line per entry: position, model tokens, pack, OS, size and status
chips; family, friendly name, osId, folder, zip state, Dell hint and
the verbatim lint findings are in the row body.
- Status chips compare the staged map with the saved one: New, Edited,
Moved from #n, Removing, the worst current finding, and 'Clears on
save' / 'Clears n' when the staged changes resolve this entry's
findings. The toolbar and a sticky save bar show lint now and after.
- Removing an entry is staged with Undo remove instead of deleting the
row; Undo edit puts an edited entry back.
- Reordering moved into the row menu (Move up / down / to position).
The Move dialog shows the order after the move and re-lints the staged
map with the move applied, listing any new errors before staging it.
- An edit that changes the tokens but keeps the old friendly name is
flagged in the row and in the review step.
- Filters: Win11/Win10 with counts, 'Findings or unsaved', 'Zip
problems' (missing, trap and case); a status key explains the chips.
- _image_header.html: new header and underline tabs for every image tab;
the shared review modal and diff use the design tokens.
Imaging floor (/imaging, /imaging/tiles):
- One line per PC: status chip, serial with machine number, hostname
and IP, stage text with a segmented stage track, one action plus a
'...' menu. Everything else (description, error, timestamps, Intune
ID + QR, Set category / ARTS links, LAPS QR, log tail) is in the row's
expandable body.
- Order: failed, needs action (stage 7), in progress, done; log-only
bays fold into one collapsed group. imaging_status.floor_state() and
floor_order() compute this.
- Status filter buttons with live counts next to the text filter. SSE
refresh, expanded-row memory and LAPS handling are unchanged.
- Stage text is never truncated; BIOS updates and erasing are bold.
Overview (/):
- Services popover, technician to-do line, the six most urgent floor
rows (?limit=6 partial, refreshed every 15 s), and image cards with
lint warnings, map errors and missing zips as separate chips. New,
clone, delete and unattend stay on the cards' menus.
Copy buttons are now handled once in static/app.js, with a fallback for
plain-http pages where navigator.clipboard is unavailable.
- static/pxe-ui.css: the redesign's colour tokens (light and dark),
shell, chips, stage track, expandable rows, menus and buttons. The
legacy tokens (--bg-card, --border, --text-light, ...) alias onto the
new ones so pages not yet redesigned blend in.
- base.html: new sidebar (Operate, Images, Updates, Tools) with the GE
Aerospace logo on the brand blue, to-do count, theme toggle with
aria-pressed, and a menu button on narrow screens. The to-do banner is
now a one-line strip. Skip link and <main> landmark added.
- _ui.html: Jinja macros for chip, track, the actions menu and the page
header.
- Report view: the hero summarised only the first erasure, so a drive whose
Purge failed and Clear fallback succeeded showed Failed while the list said
Successful. It now uses the per-drive outcome (report_result) and lists the
standards that wiped each drive.
- To-do and ServiceNow: reports with no usable document id could never be
ticked or cleared (400). They are now tracked by file name (file:<name>).
- Imaging: the LAPS password field is masked, with a Show/Hide toggle.
- Imaging: succeeded sessions not updated for ACTIVE_WINDOW_HOURS are hidden
from the dashboard (failed and in-progress always stay), with Show all.
- Enrollment: the active SFLD package can no longer be deleted, which left
ppkg.conf pointing at a missing file; its row is marked Active.
- Import: confirm before importing, saying upload-folder sources are moved
and same-name files in the image are overwritten.
'24250' also matched the Dell 24 All-in-One EC24250, which needs a different
BIOS (Dell_EC27250_EC24250). The three exact models are the ones the combined
file is built for. Found by the webapp's Dell check (ambiguous match).
FileVersion detection on goCMM.exe so an older 2.x does not satisfy it. Same
NSIS installer and /S switch. Deployed to installers-post/cmm and the share's
shopfloor-setup copy; 2.12.3 moved to installers-post/cmm-archive so it is not
copied to every CMM image.
Per-bay backups were taken under goCMM 1.1, so goCMM.reg restores
Installation Directory = the 1.1 folder. goCMM 2.x never reads it, but the 2.x
installer sees it as '1.1 installed' and shows a dialog /S cannot answer,
which hung GE-Enforce on CMM11 and CMM12. Kept when 1.1 really is installed.
sbsigntool, zip and curl, the Zscaler root CA in the system store (GitHub is
TLS-intercepted on the corporate NIC; downloads.dell.com is not), and
/var/lib/pxe-webapp/updates.
Updates group:
- Dell drivers and BIOS: check Dell's catalogs against all three driver maps
and models.txt, download with a shared speed cap, repack, preview, apply
with backups and rollback.
- iPXE boot files: check GitHub for the signed Secure Boot set, verify the
sha256 and each file's signer, install atomically, roll back. Includes the
by-hand procedure.
- Blancco: upload a release, stage it, test-boot it from the menu, activate,
roll back.
- BPRT sync: validate a batch uploaded from the MediaCreator Lite cache
(scripts/windows/Sync-BPRT.ps1 or a zip), show the diff, swap with the site
overlay files kept.
Images: one sidebar entry per image with Overview, Drivers, Unattend and OS and
Packages tabs. Every save shows a diff first, keeps the file's format, makes a
backup and can be undone. Driver lint runs inline.
Enrollment: upload standard/engineer MCL packages, one per tenant/purpose,
with archive and restore. Hardware coverage counts engineer as Win11.
Scanned against Dell's per-model catalogs (CatalogIndexPC, 2026-10-09).
About 40 lines were behind, nine pointed at another platform's BIOS
(Latitude 7450 -> OptiPlex 7450, Latitude 5530/5540 -> Precision
5530/5540, Precision 5490/7770/7780 -> OptiPlex AIO, Precision 5550 ->
Latitude 5550, OptiPlex 7400/7410/7420 AIO -> Latitude 7x00/7x10/7x20),
and '7320 2-in-1 Detachable' never matched the WMI name. Specific lines
now precede general ones (5430 Rugged, 7090 Ultra, 3000 Thin Client)
because check-bios.cmd takes the first substring match.
The gea-standard/gea-engineer path (purpose -> tenant -> enroll_staged)
never mapped the enrollment share, so winpe-status-push.ps1 and
preflight.ps1 silently skipped those builds. Map it at :end if absent.
The hardware report went out from winpe-status-push.ps1 on the
enrollment share (Y:), but startnet.cmd never maps Y: on the
gea-standard / gea-engineer path (choices 1/2 go purpose -> tenant ->
enroll_staged), so those builds never reported. The same gap means
neither the status push nor preflight.ps1's driver check has ever run
for standard/engineer images.
The BIOS share is mapped by every WinPE boot before the menu, and
check-bios.cmd lives on it, so it now calls hardware-report.ps1 from
the same folder (best effort, output discarded). winpe-status-push.ps1
goes back to status only, so shopfloor bays are not counted twice. The
playbook deploys hardware-report.ps1 with the other BIOS files.
WinPE now reports each machine's WMI model, manufacturer, Dell system
SKU and BIOS version to /hardware/seen (winpe-status-push.ps1, best
effort, wmic only). The webapp records every model seen and checks it
against what the server has:
- each image's Deploy/Control/HardwareDriver.json, matched exactly as
PESetup's GetDriverByModel does (as reimplemented in
lint-driver-catalogue.py), plus whether the pack's zip is on disk;
- the WinPE BIOS manifest (substring match like check-bios.cmd).
/hardware lists every model with per-image driver status and BIOS
status. A model missing a Win11 pack or a BIOS entry becomes item 5 on
the Technician To-Do (and the banner count) until the pack/BIOS is added
or it is dismissed. Virtual machines are ignored.
Also deploys the repo winpe-status-push.ps1 over the live copy, which
predated the -CurrentStage/-StageIndex parameters startnet.cmd passes
for the BIOS-flash stage, so that status post was failing.
Webapp: config.DISPLAY_TZ (default America/New_York) and a local_dt
filter that renders datetimes, ISO strings and Unix timestamps as e.g.
"2026-10-05 13:54 EDT", DST included. Used for the ServiceNow tick list,
technician to-do, imaging tiles and detail page; timestamp_fmt (reports,
backups, enrollment) goes through it too instead of relying on the
process TZ. CSV report_date is Eastern with its offset. Evidence-pack
months are Eastern calendar months, so a wipe late on the 31st lands in
that month rather than the next.
Blancco: init points the new root's /etc/localtime at America/New_York
so the GUI clock is local. Report timestamps keep their explicit
offset; report.utc_offset stays 0 since a fixed offset cannot follow DST.
Report file names stay UTC, as Blancco's own Save names them.
The theme sets white-space: nowrap on every table cell, so the
ServiceNow tick list's destruction note (and the to-do failure column)
ran as one line and pushed the Done buttons off to the right. A
td.wrap utility lets prose cells wrap within 16-28rem.
Each SSE/poll refresh replaces the tiles' HTML, so the nested Log tail
<details> snapped shut on every update while a wipe was running. Its
open state is now remembered per tile in localStorage like the tile
itself, and its scroll position is kept: following the bottom keeps
following new lines, scrolled up stays put.
The initrd's busybox has the tr applet but no /bin/tr link, so the
quiet boot printed "/init: line 140: tr: not found" and the stage 1/2
dashboard posts were skipped. sed is linked.
First normal (non-debug) run stuck at 6/7 "Report sent to cloud": outside
Blancco's debug mode Albus does not log erasureFinishedForEntity, Report
saving success or "Auto process reached the final step", which the
parser had been taken from a debug-mode journal.
A watcher thread now reads each new /reports/*.xml (auto mode always
saves there) once it is stable and posts 7: "Wipe complete" (succeeded)
or "Erasure FAILED: <model serial, ...>" (failed). Judged per drive, so
a failed Purge with a successful Clear fallback on the same drive is a
wipe. --outcome FILE prints the verdict for a report.
Technician To-Do (sidebar link with a count, and a banner on every page
while anything is open) lists the playbook steps the server cannot do:
1. wipes still to tick on the Onsite Bin RITM (ENT-045/159)
2. monthly evidence packs to upload to Box (ENT-056/158), Mark uploaded
3. drives that failed to wipe, to destroy (COD recorded)
4. reports Blancco could not upload to the cloud (Resolved)
Marks are stored in the Blancco state file; the counts are cached for 60s
and refreshed on every mark, ServiceNow tick and cloud-status post.
Results are now judged per drive. Blancco keeps every attempt in the
report, so a NIST Purge that failed followed by a successful Clear
fallback on the same drive appeared as two entries, and the Reports page
rolled the whole report up to Failed. 20 such wipes since May showed as
Failed; they were wiped (the work instruction counts the fallback as a
success). The CSV marks those rows "Fallback: ... then erased with ...".
One genuine failure remains: HNMD1V3, Seagate Z500R4KG, 2026-08-11.
Automates the Blancco parts of the onsite-support CMMC playbook:
- ENT-056/158 evidence pack: /reports/evidence?month=YYYY-MM returns
ENT-056_<Site>_<YYYY-MM>.zip (summary.csv, README, each report's XML
and PDF). pxe-blancco-evidence.timer saves last month's pack to the
reports share's evidence/ folder on the 1st (Persistent).
- ENT-045/159 ServiceNow tick list: /reports/servicenow lists recent
reports as "Wiped" or "Blancco Wipe failed" with a pre-written
destruction note, copy buttons and Done (CSRF-protected).
- Cloud upload: blancco-progress.py posts each report's upload result
("Sending report document id" -> "Report sent to MC") to
/reports/cloud-status (CSRF-exempt like /imaging/status); the Reports
page and the CSVs show it, so a wipe missing from BMP is visible.
- CSV gains failure_reason (exception messages, failed steps, error
counts), business_location and cloud_upload.
- Preferences: business_location "West Jefferson" (config.BLANCCO_SITE)
and pdf+xml reports; the report copier now copies the PDF too, named
after its XML. .part and hidden files are not listed as reports.
State (cloud confirmations, ServiceNow ticks) is a JSON file at
/var/lib/pxe-webapp/blancco-state.json, off the report share.
Sessions with source/pctype "blancco" (posted by blancco-init.sh and
blancco-progress.py) now render with their own stage labels
(Downloading, Starting, Licensing, Erasing, Erasure finished, Report
sent, Wipe complete; Erasure FAILED on failure), a WIPE badge with the
drive percentage instead of "no DeviceId", the current step beside the
stage, and an Erasure reports link. The drive percentage is folded into
the bar across stage 4. The LAPS QR card is hidden for Blancco tiles.
Also render the bar percentage as an integer: round() returns a float,
so every tile showed e.g. "57.0%".
Each Blancco PC now gets a tile on /imaging, keyed by BIOS serial with
pctype "blancco", using the /imaging/status endpoint the WinPE clients
already post to (stage_total 7):
1 Downloading Blancco, 2 Starting Blancco (blancco-init.sh, wget)
3 Waiting for licence / Licence OK (N left)
4 Erasing: step N - <step> [NN%]
5 Erasure finished / Report saved
6 Report sent to cloud
7 Done (succeeded), or Erasure FAILED (failed, sticks)
playbook/blancco-progress.py follows the AlbusSeven journal inside the
Blancco rootfs and maps its lines to those stages; patterns taken from
a real 7.20 auto-mode run and replayed with --replay/--dry-run, plus a
synthetic failed step. Init fetches it from the web root at boot and
installs it as blancco-progress.service; the playbook deploys it there.
The report copier adds a "Report copied to share" log line. Stage 1
resets a finished tile for the same serial. All posts are best effort.
process=auto erases unattended but Albus forces auto_backup off outside
workflow/manual, so every report needed a manual Save to reach the
share. Debug SSH on a live 7.20 run showed Albus does keep each report
at /reports/<document_id>.xml ("Report saving success", "CRC verified")
and uploads it to MC, with /mnt/share already mounted.
Install blancco-report-sync as a systemd service in the new root: every
10s copy each finished /reports/*.xml (older than 5s, not yet copied)
to /mnt/share as YYYYMMDD_HHMMSS_report.xml (UTC, as a manual Save
names it), via a .part file and rename. Verified live: the auto-run
report landed as 20261005_164520_report.xml.
