Test: image re-import merges Deploy/Applications (MCL certs) and keeps the Engineering Layer

New Engineering Layer tab on the engineer image page. A site uploads
Engineering_Install_v<ver>.exe (keeps prereqs) or a .zip of the whole
extra_engineering payload. The upload is streamed to disk, checked (MZ
header, no unsafe zip paths) and swapped in; the replaced payload is
archived (two kept) with a Restore button. Install-EngineeringLayer.ps1
stays repo-owned and now installs the newest Engineering_Install_v*.exe.

KB: Part 4 becomes Site Content (enrollment package, Engineering Layer,
Blancco site settings, Shop Floor apps) plus a new Adding Shop Floor
Apps section for preinstall.json/postppkg.json. WJ examples removed.

.githooks/pre-commit

@@ -0,0 +1,20 @@
+#!/bin/bash
+# Refuse a commit that stages an unattend answer file the linter rejects.
+# A bad answer file stops every bay imaged with it at "Windows could not
+# parse or process unattend answer file". Enable with:
+#   git config core.hooksPath .githooks
+set -euo pipefail
+ROOT="$(git rev-parse --show-toplevel)"
+mapfile -t FILES < <(git diff --cached --name-only --diff-filter=ACMR | grep -iE '(^|/)(Flat)?Unattend[^/]*\.xml$' || true)
+[ ${#FILES[@]} -eq 0 ] && exit 0
+TMP="$(mktemp -d)"; trap 'rm -rf "$TMP"' EXIT
+STAGED=()
+for f in "${FILES[@]}"; do
+    out="$TMP/$(echo "$f" | tr '/' '_')"
+    git show ":$f" > "$out"     # lint what is staged, not the working copy
+    STAGED+=("$out")
+done
+if ! python3 "$ROOT/scripts/lint-unattend.py" --local "${STAGED[@]}"; then
+    echo "pre-commit: unattend lint failed for: ${FILES[*]}" >&2
+    exit 1
+fi

.gitignore

@@ -101,6 +101,34 @@ playbook/shopfloor-setup/Shopfloor/PrinterInstallerMap.exe
 # /home/camp/pxe-images/keyence/Logs/Keyence/install.log for the signature).
 # Canonical source on the GE-Enforce SFLD share:
 #   tsgwp00525\sfld$\v2\shared\dt\shopfloor\gea-shopfloor-keyence\apps\Data1.cab
-# Stage to playbook/shopfloor-setup/gea-shopfloor-keyence/installers/Data1.cab
 # before building the USB image.
-playbook/shopfloor-setup/gea-shopfloor-keyence/installers/Data1.cab
+playbook/shopfloor-setup/gea-shopfloor-waxtrace/captured-binary/
+
+# Keyence per-model installer payloads - too big for git, staged via sync-keyence.sh
+playbook/shopfloor-setup/gea-shopfloor-keyence/vr3000/installers/Data*.cab
+playbook/shopfloor-setup/gea-shopfloor-keyence/vr3000/installers/*.msi
+playbook/shopfloor-setup/gea-shopfloor-keyence/vr5000/installers/Data*.cab
+playbook/shopfloor-setup/gea-shopfloor-keyence/vr5000/installers/*.msi
+playbook/shopfloor-setup/gea-shopfloor-keyence/vr6000/installers/Data1.cab
+
+# Part Marker (Telesis) utility password - secret, deployed via the enrollment
+# share from the working tree, never committed.
+playbook/shopfloor-setup/gea-shopfloor-partmarker/PartMarker/Mark/utilpassword.txt
+
+# HeatTreat per-machine DNC .reg exports (6601-6604) - contain DNC FtpPasswd
+# credentials. Deployed via the enrollment share from the working tree.
+playbook/shopfloor-setup/gea-shopfloor-heattreat/reg/*.reg
+
+# SIC e10 controller config files carry the programmer/supervisor password
+# in cleartext. Never commit them. See reference/e10/README.md
+reference/e10/**/ConfigCtrl*
+reference/e10/**/*.kind1
+# GE part programs carry part numbers and marking content. Keep them out of
+# git; they live in ~/pxe-images/e10-testing/partprograms/
+reference/e10/partprograms/
+
+# Per-site playbook values (NIC MACs); template: playbook/site-vars.example.yml
+playbook/site-vars.yml
+
+# Site content pulled from a live server (scripts/capture-site-content.sh)
+site-content/

Binary/Binary.NewBinary19

@@ -0,0 +1,40 @@
+Option Explicit
+
+
+' アップグレードコードから、製品コードを取得
+'
+'  第１引数 : アップグレードコード(「{」、「}」、ハイフンあり)
+Function GetProductCodeFromUpgradeCode(UpgCode)
+	Dim listProductCode
+	Dim szProductCode
+	
+	' アップグレードコードから、関連する製品名のリストを取得
+	Set listProductCode = Session.Installer.RelatedProducts(UpgCode)
+	
+	' 基本、１件のみヒットするものとする
+	For Each szProductCode In listProductCode
+		GetProductCodeFromUpgradeCode = szProductCode
+		' １件目を取得した段階で抜ける
+		Exit For
+	Next
+End Function
+
+
+' アップグレードコードから既にインストール済みのアプリケーションのインストールパスを取得する
+Sub GetInstallPath()
+	Dim WshShell
+	Dim szProductCode
+	Dim szInstallStringKey
+	
+	Set WshShell = CreateObject("WScript.Shell")
+	
+	' アップグレードコードから、製品コードを取得
+	szProductCode = GetProductCodeFromUpgradeCode(Session.Property("UpgradeCode"))
+	
+	' レジストリのInstallLocationを取得
+	szInstallStringKey = WshShell.RegRead("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + szProductCode + "\InstallLocation")
+
+	Session.Property("INSTALLDIR_FOR_MAJORUPGRADE") = szInstallStringKey
+
+	Set WshShell = nothing
+End Sub

Binary/Binary.NewBinary20

@@ -0,0 +1,22 @@
+Option Explicit
+
+Sub CheckOSVersion   
+    Const HKEY_LOCAL_MACHINE = &H80000002 
+	Dim WshShell,objRegistry
+	Dim strComputer, strKeyPath, strValue, strValueName
+	
+	Set WshShell = CreateObject("WScript.Shell")
+	
+	strComputer = "."
+	Set objRegistry = GetObject("winmgmts:{impersonationLevel=impersonate}!\\" & strComputer & "\root\default:StdRegProv") 
+    strKeyPath = "SOFTWARE\Microsoft\Windows NT\CurrentVersion"
+    strValueName = "CurrentMajorVersionNumber" 
+    objRegistry.GetDWORDValue HKEY_LOCAL_MACHINE,strKeyPath,strValueName,strValue
+    
+    If (not IsNull(strValue)) and (strValue=10) Then
+        Session.Property("IsWindows10")="1"
+    else
+        Session.Property("IsWindows10")="0"
+    End If
+
+End Sub

Binary/Binary.NewBinary21

@@ -0,0 +1,13 @@
+Option Explicit
+
+'レジストリに登録する日付をプロパティに設定
+Sub SetInstallDate
+	Session.Property("INSTALLDATE") = YYYYMMDD
+End Sub
+
+'YYYYMMDD形式の日付を返す
+Function YYYYMMDD
+
+	YYYYMMDD = Year(Date) & Right("0" & Month(Date), 2) & Right("0" & Day(Date), 2)
+
+End Function

Build-PxeUsb.cmd

@@ -0,0 +1,29 @@
+@echo off
+rem Build the PXE server installer USB. Double-click this file in the build
+rem folder (copied to a local disk, e.g. C:\pxe-usb). It asks for admin
+rem rights, lists the USB disks and asks which one to erase and build.
+rem Runs scripts\Build-PxeUsb.ps1 -Interactive with the execution policy
+rem bypassed for that one window only.
+setlocal
+set "PS1=%~dp0scripts\Build-PxeUsb.ps1"
+if not exist "%PS1%" (
+    echo Cannot find %PS1%
+    echo Run this from the pxe-usb build folder.
+    pause
+    exit /b 1
+)
+if "%~d0"=="\\" goto :network
+net use %~d0 >nul 2>&1 && goto :network
+powershell -NoProfile -ExecutionPolicy Bypass -Command "Start-Process powershell -Verb RunAs -ArgumentList '-NoProfile','-ExecutionPolicy','Bypass','-File','\"%PS1%\"','-Interactive'"
+exit /b 0
+
+:network
+echo This build folder is on a network drive (%~d0).
+echo An administrator window cannot see network drives mapped in this session.
+echo Copy the whole pxe-usb folder to a local disk first, for example:
+echo.
+echo     robocopy "%~dp0." C:\pxe-usb /E
+echo.
+echo then double-click C:\pxe-usb\Build-PxeUsb.cmd
+pause
+exit /b 1

Capture-SiteContent.cmd

@@ -0,0 +1,14 @@
+@echo off
+rem Pull the site content (Office, Adobe, certificates, Engineering Layer,
+rem BIOS files, boot.wim, Blancco) from a running PXE server into this
+rem build folder. Double-click it; it asks for the server address and the
+rem pxe password. Runs scripts\Capture-SiteContent.ps1 -Interactive.
+setlocal
+set "PS1=%~dp0scripts\Capture-SiteContent.ps1"
+if not exist "%PS1%" (
+    echo Cannot find %PS1%
+    echo Run this from the pxe-usb build folder.
+    pause
+    exit /b 1
+)
+powershell -NoProfile -ExecutionPolicy Bypass -File "%PS1%" -Interactive

README.md

@@ -16,14 +16,14 @@ Client PXE boot (UEFI Secure Boot)
      ├── Windows PE  -> wimboot -> boot.wim -> startnet.cmd -> Samba share -> Image deployment
      ├── Clonezilla  -> vmlinuz/initrd -> Disk cloning/imaging
      ├── Blancco     -> Native kernel + initramfs -> NIST 800-88 drive erasure
-     └── Memtest86+  -> Memory diagnostics
+     (memory test: Dell F12 > Diagnostics)
 ```
 
 ### Services
 
 | Service     | Port      | Purpose                                  |
 |-------------|-----------|------------------------------------------|
-| dnsmasq     | 67/udp    | DHCP (10.9.100.10-100, 12h lease)        |
+| dnsmasq     | 67/udp    | DHCP (172.16.9.10-100, 12h lease)        |
 | dnsmasq     | 69/udp    | TFTP (serves ipxe.efi)                   |
 | Apache      | 80/tcp    | HTTP (wimboot, WinPE boot files, proxy)  |
 | Apache      | 4433/tcp  | iPXE boot script (GetPxeScript.aspx)     |
@@ -32,8 +32,8 @@ Client PXE boot (UEFI Secure Boot)
 
 ### Network
 
-- **PXE server IP:** `10.9.100.1/24`
-- **DHCP range:** `10.9.100.10` - `10.9.100.100`
+- **PXE server IP:** `172.16.9.1/24`
+- **DHCP range:** `172.16.9.10` - `172.16.9.100`
 - **Firewall:** UFW deny-by-default, only service ports open (22, 67, 69, 80, 445, 4433, 9009)
 
 ## Quick Start
@@ -54,18 +54,25 @@ Client PXE boot (UEFI Secure Boot)
 ### Step 1: Download Offline Packages
 
 ```bash
-./scripts/download-packages.sh
+./scripts/download-packages.sh --iso /path/to/ubuntu-24.04.x-live-server-amd64.iso
+./scripts/check-updates.py          # expect: PASSED, 0 security updates
+./scripts/fetch-ipxe.sh
 ```
 
+`fetch-ipxe.sh` downloads the Secure Boot iPXE chain into `boot-files/`, pinned by sha256: the iPXE release
+tarball (its snponly build becomes `ipxe.efi`) and iPXE's dual-signed shim (Microsoft UEFI CA 2011 + 2023),
+which every UEFI client boots as `ipxe-shim.efi`. Keep the old Broadcom-signed `boot-files/ipxe.efi` too: the
+playbook installs it as `ipxe-bcm.efi`, the rollback boot file.
+
 Downloads all .deb packages and Python wheels for offline installation (~140 MB of debs, ~20 MB of wheels).
 
 ### Step 2: Prepare Boot Tools (optional)
 
 ```bash
-./scripts/prepare-boot-tools.sh /path/to/blancco.iso /path/to/clonezilla.zip /path/to/memtest.bin
+./scripts/prepare-boot-tools.sh /path/to/blancco.iso
 ```
 
-Extracts and configures boot tool files (Blancco, Clonezilla, Memtest86+). Automatically patches Blancco's config.img to auto-save erasure reports to the PXE server's Samba share.
+Extracts and configures boot tool files (Blancco, Clonezilla with Debian's signed shim for Secure Boot). Automatically patches Blancco's config.img to auto-save erasure reports to the PXE server's Samba share.
 
 ### Step 3: Build the USB
 
@@ -73,7 +80,11 @@ Extracts and configures boot tool files (Blancco, Clonezilla, Memtest86+). Autom
 sudo ./scripts/build-usb.sh /dev/sdX /path/to/ubuntu-24.04-live-server-amd64.iso
 ```
 
-Creates a bootable USB with two partitions:
+On a Windows PC instead: `scripts/stage-usb-share.sh` here, then
+`Build-PxeUsb.ps1 -DiskNumber N -NoSiteVars` there (see SETUP.md, "Building
+the USB on a Windows PC").
+
+`build-usb.sh` creates a bootable USB with two partitions:
 - **Partition 1:** Ubuntu Server installer
 - **Partition 2:** CIDATA (autoinstall config, offline .debs, pip wheels, Ansible playbook, webapp, boot tools)
 
@@ -85,12 +96,12 @@ Creates a bootable USB with two partitions:
 4. After reboot, the first-boot script:
    - Installs all offline .deb packages
    - Runs the Ansible playbook (configures dnsmasq, Apache, Samba, UFW, webapp)
-   - Configures static IP `10.9.100.1/24`
+   - Configures static IP `172.16.9.1/24`
 5. Move the server's wired NIC to the isolated PXE switch
 
 ### Step 5: Access the Web Interface
 
-Open `http://10.9.100.1:9009` from any machine on the isolated network.
+Open `http://172.16.9.1:9009` from any machine on the isolated network.
 
 ## Web Management Interface
 
@@ -160,8 +171,7 @@ pxe-server/
 │   └── shopfloor-display-imaging-guide.md  # End-user imaging guide
 ├── boot-tools/                   # Extracted boot tool files (gitignored)
 │   ├── blancco/                  # Blancco Drive Eraser
-│   ├── clonezilla/               # Clonezilla Live
-│   └── memtest/                  # Memtest86+
+│   └── clonezilla/               # Clonezilla Live
 ├── boot-files/                   # WinPE boot files (boot.wim, wimboot, ipxe.efi, BCD)
 ├── offline-packages/             # .deb files (gitignored, built by download-packages.sh)
 ├── pip-wheels/                   # Python wheels (gitignored, built by download-packages.sh)
@@ -169,55 +179,31 @@ pxe-server/
 ├── bios-staging/                 # Dell BIOS update binaries (gitignored)
 ├── scripts/                      # Build, deploy, and helper scripts
 │   ├── build-usb.sh              # Builds the installer USB (2-partition)
-│   ├── build-proxmox-iso.sh      # Builds self-contained Proxmox installer ISO
+│   ├── Build-PxeUsb.ps1          # Windows: builds the installer USB (one FAT32 partition)
+│   ├── stage-usb-share.sh        # Puts repo + payload on the pxe-images share for it
 │   ├── prepare-boot-tools.sh     # Extracts and patches boot tool files
 │   ├── download-packages.sh      # Downloads offline .debs + pip wheels
 │   ├── download-drivers.py       # Downloads Dell drivers directly from dell.com
-│   ├── deploy-bios.sh            # Pushes BIOS updates to enrollment share
-│   ├── pull-bios.sh              # Pulls BIOS binaries from upstream cache
-│   ├── sync_hardware_models.py   # Syncs hardware model configs across images
+│   ├── capture-site-content.sh   # Pulls site content + fresh payload from a live server
 │   ├── Upload-Image.ps1          # Windows: upload MCL cache to PXE via SMB
 │   └── Download-Drivers.ps1      # Windows: download hardware drivers from GE CDN
 ├── config/                       # Site-specific configuration overrides
-├── startnet-template.cmd         # startnet.cmd template (synced with playbook copy)
 ├── README.md                     # This file
 └── SETUP.md                      # Detailed setup guide
 ```
 
 ## Proxmox Deployment
 
-A single ISO can be built for deploying the PXE server in a Proxmox VM:
-
-### Build the ISO
-
-```bash
-# Prerequisites (on build workstation)
-sudo apt install xorriso p7zip-full
-
-# Build the installer ISO
-./scripts/build-proxmox-iso.sh /path/to/ubuntu-24.04-live-server-amd64.iso
-```
-
-This creates `pxe-server-proxmox.iso` containing the Ubuntu installer, autoinstall config, all offline packages, the Ansible playbook, webapp, and boot tools.
-
-### Deploy on Proxmox
-
-1. Upload `pxe-server-proxmox.iso` to Proxmox storage (Datacenter -> Storage -> ISO Images)
-2. Create a new VM:
-   - **OS:** Linux 6.x kernel
-   - **BIOS:** OVMF (UEFI) or SeaBIOS
-   - **Memory:** 4096 MB
-   - **CPU:** 2+ cores
-   - **Disk:** 40+ GB (VirtIO SCSI)
-   - **Network:** Bridge connected to your isolated PXE network
-3. Attach the ISO as CD-ROM and start the VM
-4. Ubuntu auto-installs with zero interaction (~10-15 minutes)
-5. After reboot, first-boot configures all PXE services automatically
-6. Access the web interface at `http://10.9.100.1:9009`
+Build a disk image with
+`scripts/build-usb.sh --site-vars site-vars.yml --image pxe-usb.img auto UBUNTU.iso`
+and import it on the Proxmox host (`qm importdisk <vmid> pxe-usb.img
+<storage>`), attached after the system disk in the boot order. The VM needs
+two NICs: one on an isolated imaging bridge (no other DHCP server) and one
+on the corp bridge; their MACs go in `site-vars.yml`.
 
 ### Import WinPE Images
 
-After the server is running, import deployment images via the web interface at `http://10.9.100.1:9009/import` or by mounting a USB drive with WinPE content.
+After the server is running, import deployment images via the web interface at `http://172.16.9.1:9009/import` or by mounting a USB drive with WinPE content.
 
 ## Samba Shares
 
@@ -235,11 +221,11 @@ All shares use guest access (no authentication) for ease of use on the isolated
 
 Blancco Drive Eraser 7.15.1 boots via a native Ubuntu kernel with a custom initramfs (`blancco-init.sh`) that downloads and mounts the Blancco rootfs over HTTP. XML erasure reports are automatically saved to the PXE server's Samba share (`blancco-reports`). The server supports BMC cloud licensing for Blancco activation over WiFi.
 
-Reports are viewable and downloadable from the web interface at `http://10.9.100.1:9009/reports`.
+Reports are viewable and downloadable from the web interface at `http://172.16.9.1:9009/reports`.
 
 ## Notes
 
-- Run `download-packages.sh` before building USB — it downloads all offline `.deb` packages including wimtools (needed for startnet.cmd editing)
+- Run `download-packages.sh --iso <the server ISO>` before building the USB: it builds the offline apt repo (every update for the ISO's base plus the explicit packages, wimtools included) that the installer patches and installs from
 - The webapp uses session-based CSRF tokens on all POST forms and API endpoints
 
 ## Commit History

SETUP.md

@@ -11,14 +11,14 @@ Client PXE boot
      ├── Windows PE -> wimboot -> boot.wim -> startnet.cmd -> Samba -> Image deployment
      ├── Clonezilla -> vmlinuz/initrd -> Disk cloning/imaging
      ├── Blancco    -> Native kernel + initramfs -> NIST 800-88 drive erasure (auto-reports)
-     └── Memtest86+ -> Memory diagnostics
+     (memory test: Dell F12 > Diagnostics)
 ```
 
 ### Services on the PXE Server
 
 | Service     | Port      | Purpose                                  |
 |-------------|-----------|------------------------------------------|
-| dnsmasq     | 67/udp    | DHCP (10.9.100.10-100)                   |
+| dnsmasq     | 67/udp    | DHCP (172.16.9.10-100)                   |
 | dnsmasq     | 69/udp    | TFTP (serves ipxe.efi)                   |
 | Apache      | 80/tcp    | HTTP (wimboot, WinPE boot files, proxy)  |
 | Apache      | 4433/tcp  | iPXE boot script (GetPxeScript.aspx)     |
@@ -46,10 +46,30 @@ Client PXE boot
 ### Step 1: Download Offline Packages (one-time, requires internet)
 
 ```bash
-./scripts/download-packages.sh
+./scripts/download-packages.sh --iso /path/to/ubuntu-24.04.x-live-server-amd64.iso
+./scripts/check-updates.py          # expect: PASSED, 0 security updates
+./scripts/fetch-ipxe.sh
 ```
 
-Downloads all .deb packages (ansible, dnsmasq, apache2, samba, wimtools, etc.) into `offline-packages/` and Python wheels (flask, lxml) into `pip-wheels/`. Approximately 252 packages (~140 MB) + 8 Python wheels.
+`fetch-ipxe.sh` downloads the Secure Boot iPXE chain into `boot-files/`, pinned by sha256: the iPXE release
+tarball (its snponly build becomes `ipxe.efi`) and iPXE's dual-signed shim (Microsoft UEFI CA 2011 + 2023),
+which every UEFI client boots as `ipxe-shim.efi`. Keep the old Broadcom-signed `boot-files/ipxe.efi` too: the
+playbook installs it as `ipxe-bcm.efi`, the rollback boot file.
+
+`download-packages.sh` needs docker (no sudo) and the SAME server ISO that
+`build-usb.sh` will use. The install is offline (autoinstall uses a dead
+mirror on purpose), so the server's base is exactly that ISO's; the script
+unpacks the ISO's install image into a docker image and resolves there:
+every update of an installed package, the explicit package list
+(ansible, dnsmasq, apache2, samba, wimtools, zip, the HWE kernel, ...) and
+the newest version of what the installer adds from the ISO's pool (kernel,
+grub, openssh-server). `offline-packages/` becomes an apt repository
+(debs + `Packages` + `explicit.list`), checked offline in a fresh container
+of the base before the script finishes. On the server, autoinstall's
+late-commands run `scripts/offline-apt-install.sh` on it: one apt
+transaction from the local repo only, any error fails the install (log:
+`/var/log/offline-apt-install.log`). The webapp's pinned, hashed wheels go
+to `pip-wheels/`. About 500 debs (~1.6 GB) + 8 wheels.
 
 **Packages included:**
 - **Server:** dnsmasq, apache2, samba, ufw, cron
@@ -61,41 +81,107 @@ Downloads all .deb packages (ansible, dnsmasq, apache2, samba, wimtools, etc.) i
 ### Step 2: Prepare Boot Tools (optional)
 
 ```bash
-./scripts/prepare-boot-tools.sh /path/to/blancco.iso /path/to/clonezilla.zip /path/to/memtest.bin
+./scripts/prepare-boot-tools.sh /path/to/blancco.iso
 ```
 
-Extracts boot files for Blancco, Clonezilla, and Memtest86+ into the `boot-tools/` directory. Automatically patches Blancco's `config.img` to auto-save erasure reports to the PXE server's Samba share.
+Extracts boot files for Blancco and Clonezilla (64-bit with Debian's signed shim, so it boots with Secure Boot on, plus the last 32-bit release for XP-era PCs) into the `boot-tools/` directory. Automatically patches Blancco's `config.img` to auto-save erasure reports to the PXE server's Samba share.
+
+### Step 2b: Capture site content from a running server
+
+```bash
+./scripts/capture-site-content.sh            # dry run: lists what would change
+./scripts/capture-site-content.sh --apply    # pull it
+```
+
+Pulls what neither the repo nor the MCL image import brings, from a working PXE server (default 172.16.9.1, SSH key login as `pxe`): `_shared/Applications/extra` (Office, Adobe, OpenText, Java, fonts, Wi-Fi, Zscaler), the GE CA certificates and the Engineering Layer payload in each image's `Deploy/Applications`, and the links images keep there, into `site-content/`. It also refreshes `bios-staging/` (BIOS files and `models.txt`), `boot-files/boot.wim` and the Blancco files in `boot-tools/blancco/` from the server. It writes `site-content/SHA256SUMS`, which the playbook checks before restoring anything, and refuses content a FAT32 USB cannot hold. Without it a new server cannot build Standard or Engineer (`build-usb.sh` refuses unless you pass `--skip-site-content`).
+
+The first MCL image import on the new server then seeds `_shared/Applications/BPRT`, adding our overlay scripts from the repo.
 
 ### Step 3: Build the USB
 
 ```bash
-# Basic — server only (import WinPE images later)
-sudo ./scripts/build-usb.sh /dev/sdX /path/to/ubuntu-24.04-live-server-amd64.iso
+# Basic: server only (import WinPE images later). site-vars.yml holds the
+# two NIC MACs (copy playbook/site-vars.example.yml); --site-vars or
+# --no-site-vars is required.
+sudo ./scripts/build-usb.sh --site-vars site-vars.yml /dev/sdX /path/to/ubuntu-24.04-live-server-amd64.iso
 
-# With WinPE images bundled (single USB, larger drive needed)
-sudo ./scripts/build-usb.sh /dev/sdX /path/to/ubuntu-24.04.iso /path/to/winpe-images
+# With WinPE images bundled (single USB, larger drive needed; no file may
+# be 4 GiB or more, FAT32)
+sudo ./scripts/build-usb.sh --site-vars site-vars.yml /dev/sdX /path/to/ubuntu-24.04.iso /path/to/winpe-images
+
+# Same layout into a disk-image file, no root (dd it to a stick later, or
+# boot it in a VM: see tests/vm/README.md; on Proxmox: qm importdisk).
+# SIZE is e.g. 16G or "auto".
+./scripts/build-usb.sh --site-vars site-vars.yml --image pxe-usb.img auto /path/to/ubuntu-24.04.iso
 ```
 
+Options: `--payload-root DIR` takes offline-packages/, pip-wheels/,
+boot-files/, boot-tools/, enrollment/, bios-staging/ and drivers-staging/
+from another checkout; `--skip-enrollment`, `--skip-bios`,
+`--skip-drivers`, `--skip-boot-tools` leave those out; `--yes` skips the
+prompt. The build refuses payloads that do not match their pins: the iPXE
+files against the playbook's `ipxe_*_sha256`, each wheel against its own
+package's hashes in `webapp/requirements.txt` (no PyPI fallback), and the
+ISO against the volume id `offline-packages/iso-volid` was resolved for. The ISO volume label and El Torito load sizes are read from the
+ISO, so any 24.04.x point release works.
+
 This creates a bootable USB with:
 - **Partition 1:** Ubuntu Server installer
 - **Partition 2:** CIDATA (autoinstall config, offline .debs, pip wheels, Ansible playbook, webapp, boot tools)
 
+#### Building the USB on a Windows PC
+
+`scripts/Build-PxeUsb.ps1` builds the same stick on Windows, with the same
+checks, no Linux tools needed. It writes ONE FAT32 partition labelled
+CIDATA holding the Ubuntu ISO's files (boot menu patched for autoinstall)
+and the payload; it boots in UEFI mode only (Secure Boot works) and is at
+most 32 GB (the FAT32 size Windows formats). Every file is read back and
+compared by SHA-256.
+
+On the build PC, put the repo and payload on the share:
+
+```bash
+./scripts/stage-usb-share.sh        # -> ~/pxe-images/pxe-usb (hard links)
+```
+
+On the Windows PC, in an elevated PowerShell (Z: = the pxe-images share):
+
+```powershell
+Z:\pxe-usb\scripts\Build-PxeUsb.ps1                                  # lists USB disks
+Z:\pxe-usb\scripts\Build-PxeUsb.ps1 -DiskNumber 3 -NoSiteVars        # or -SiteVars FILE
+```
+
+It refuses a disk that is not on the USB bus or is the boot/system disk,
+and asks you to type the disk number before erasing it.
+
 ### Step 4: Boot the Target Machine
 
 1. Insert the USB into the target machine
 2. Press F12 (or vendor boot key) and select the USB
 3. Ubuntu auto-installs — no interaction needed
-4. After reboot, the first-boot script installs all .deb packages and runs the Ansible playbook
+4. After reboot, the first-boot script runs the Ansible playbook (the .debs
+   were installed by the installer); it pins the two NICs by MAC
 5. PXE services (dnsmasq, Apache, Samba) are configured automatically
 6. Flask webapp starts on port 9009
+7. If the playbook fails, `/var/lib/pxe-firstboot.failed` and a banner on
+   the console and at SSH login point at `/var/log/first-boot.log`; first
+   boot retries at the next reboot (5 attempts)
 
 ### Step 5: Connect to Isolated Network
 
-Move the server's wired NIC to the isolated switch for PXE clients.
+During the install plug in ONLY the imaging switch (GE unplugged). With
+`pxe_nic_mac` empty in site-vars, the first boot picks the one wired port
+with a link, checks it is isolated (no GE switch, no 802.1X, no other DHCP
+server) and pins it. Then plug the GE cable into any other port: it becomes
+a DHCP client for SSH and the webapp, and dnsmasq never serves it. If the
+first boot cannot tell which port is the imaging one, the console says so:
+log in and run `sudo pxe-pick-nic`, pull the imaging cable and plug it back
+in. Sites that prefer to pin both ports by MAC set `pxe_nic_mac` and
+`corp_nic_mac` instead; both cables can then be in from the start.
 
 ### Step 6: Import WinPE Content (if not bundled in Step 3)
 
-**Option A:** Use the web interface at `http://10.9.100.1:9009` to import from USB.
+**Option A:** Use the web interface at `http://172.16.9.1:9009` to import from USB.
 
 **Option B:** Manual copy:
 ```bash
@@ -107,7 +193,7 @@ sudo umount /mnt/usb2
 
 ## Web Management Interface
 
-Access at `http://10.9.100.1:9009` from any machine on the isolated network.
+Access at `http://172.16.9.1:9009` from any machine on the isolated network.
 
 | Page              | URL Path    | Purpose                                       |
 |-------------------|-------------|-----------------------------------------------|
@@ -131,7 +217,7 @@ Access at `http://10.9.100.1:9009` from any machine on the isolated network.
    - **Windows PE**: Boots via wimboot + boot.wim, maps Samba shares, begins deployment
    - **Clonezilla**: Boots Clonezilla Live for disk imaging
    - **Blancco**: Boots Drive Eraser, auto-saves reports to server
-   - **Memtest86+**: Runs memory diagnostics
+   - **Memory test**: not on the menu; Dell PCs have one built in (F12 at power-on, Diagnostics)
 
 ## Testing with KVM
 
@@ -146,7 +232,7 @@ sudo ./test-vm.sh ~/Downloads/ubuntu-24.04.3-live-server-amd64.iso
 # Watch progress (Ctrl+] to detach)
 sudo virsh console pxe-test
 
-# After install: ssh pxe@10.9.100.1 / http://10.9.100.1:9009
+# After install: ssh pxe@172.16.9.1 / http://172.16.9.1:9009
 
 # Clean up
 sudo ./test-vm.sh --destroy
@@ -177,8 +263,7 @@ pxe-server/
 │   └── shopfloor-display-imaging-guide.md  # End-user imaging guide
 ├── boot-tools/                   # Extracted boot files (gitignored, built by prepare-boot-tools.sh)
 │   ├── blancco/                  # Blancco Drive Eraser
-│   ├── clonezilla/               # Clonezilla Live
-│   └── memtest/                  # Memtest86+
+│   └── clonezilla/               # Clonezilla Live
 ├── boot-files/                   # WinPE boot files (boot.wim, wimboot, ipxe.efi, BCD)
 ├── offline-packages/             # .deb files (gitignored, built by download-packages.sh)
 ├── pip-wheels/                   # Python wheels (gitignored, built by download-packages.sh)
@@ -186,17 +271,15 @@ pxe-server/
 ├── bios-staging/                 # Dell BIOS update binaries (gitignored)
 ├── scripts/                      # Build, deploy, and helper scripts
 │   ├── build-usb.sh              # Builds the 2-partition installer USB
-│   ├── build-proxmox-iso.sh      # Builds self-contained Proxmox installer ISO
+│   ├── Build-PxeUsb.ps1          # Windows: builds the installer USB (one FAT32 partition)
+│   ├── stage-usb-share.sh        # Puts repo + payload on the pxe-images share for it
 │   ├── prepare-boot-tools.sh     # Extracts/patches boot tools from ISOs
 │   ├── download-packages.sh      # Downloads all offline packages
 │   ├── download-drivers.py       # Downloads Dell drivers from dell.com
-│   ├── deploy-bios.sh            # Pushes BIOS updates to enrollment share
-│   ├── pull-bios.sh              # Pulls BIOS binaries from upstream cache
-│   ├── sync_hardware_models.py   # Syncs hardware model configs across images
+│   ├── capture-site-content.sh   # Pulls site content + fresh payload from a live server
 │   ├── Upload-Image.ps1          # Windows: upload MCL cache to PXE via SMB
 │   └── Download-Drivers.ps1      # Windows: download hardware drivers from GE CDN
 ├── config/                       # Site-specific configuration overrides
-├── startnet-template.cmd         # startnet.cmd template (synced with playbook copy)
 ├── README.md                     # Project overview
 └── SETUP.md                      # Detailed setup guide (this file)
 ```
@@ -215,8 +298,8 @@ pxe-server/
 
 ## Network Configuration
 
-- PXE server static IP: `10.9.100.1/24`
-- DHCP range: `10.9.100.10` - `10.9.100.100`
+- PXE server static IP: `172.16.9.1/24`
+- DHCP range: `172.16.9.10` - `172.16.9.100`
 - Lease time: 12 hours
 - DNS: `8.8.8.8` (passed to clients, not used by server)
 - Firewall: UFW deny-by-default, allow 67/udp 69/udp 80/tcp 445/tcp 4433/tcp 9009/tcp

autoinstall/user-data

@@ -9,19 +9,40 @@ autoinstall:
     variant: ""
   timezone: America/New_York
 
-  # Network: static IP for isolated PXE LAN (no internet/DHCP needed)
+  # Network: DHCP only, on every wired NIC. On the standard two-NIC box the
+  # GE corporate NIC gets an address and the imaging NIC (no DHCP server on
+  # the imaging LAN) stays without one. No static 172.16.9.1 here: matched
+  # by name it would land on EVERY NIC, the GE one included, and the box
+  # would answer as 172.16.9.1 on the corporate network. First boot's
+  # playbook replaces this file with the imaging NIC pinned by MAC
+  # (pxe_nic_mac in playbook/site-vars.yml, or picked by its link when
+  # empty; corp_nic_mac optional). optional: the
+  # install and boot never wait for a lease (air-gapped is fine).
   network:
     version: 2
     ethernets:
       any-eth:
         match:
           name: "en*"
-        addresses:
-          - 10.9.100.1/24
-        dhcp4: false
+        dhcp4: true
         dhcp6: false
         optional: true
 
+  # The install is always offline, even when the corp NIC has a lease and
+  # internet: the mirror points at a closed local port, so subiquity's
+  # mirror check fails and it installs from the ISO alone (no "security
+  # updates" step from the archive). The base is then exactly the ISO's,
+  # which is what download-packages.sh resolved the offline set against;
+  # late-commands patch it from CIDATA. The real archive sources are
+  # written back at the end of late-commands.
+  apt:
+    geoip: false
+    preserve_sources_list: false
+    primary:
+      - arches: [default]
+        uri: "http://127.0.0.1:9/ubuntu"
+    fallback: offline-install
+
   # Storage configuration
   storage:
     layout:
@@ -44,34 +65,63 @@ autoinstall:
 
   # Installer-stage late commands
   late-commands:
-    # Step 1: Install deb packages from CIDATA USB
+    # Step 1: Upgrade and install from the offline set on CIDATA
+    # (packages/ is an apt repo: debs + Packages + explicit.list). Any apt
+    # error fails the install; the log is /var/log/offline-apt-install.log.
     - |
-      curtin in-target --target=/target -- bash -c '
+      curtin in-target --target=/target -- bash -euc '
       mkdir -p /mnt/cidata
       CIDATA_DEV=$(blkid -L CIDATA)
-      if [ -n "$CIDATA_DEV" ]; then
-        mount "$CIDATA_DEV" /mnt/cidata
-        if compgen -G "/mnt/cidata/packages/*.deb" > /dev/null; then
-          cp /mnt/cidata/packages/*.deb /tmp/
-          dpkg -i /tmp/*.deb 2>/dev/null || true
-          dpkg -i /tmp/*.deb 2>/dev/null || true
-          dpkg --configure -a 2>/dev/null || true
-          if command -v nmcli >/dev/null; then
-            systemctl enable NetworkManager
-          fi
-        fi
-        umount /mnt/cidata
+      mount -o ro "$CIDATA_DEV" /mnt/cidata
+      set +e
+      bash /mnt/cidata/offline-apt-install.sh /mnt/cidata/packages 2>&1 | tee /var/log/offline-apt-install.log
+      rc=${PIPESTATUS[0]}
+      set -e
+      umount /mnt/cidata
+      if [ "$rc" -ne 0 ]; then
+        echo "offline package install FAILED (rc=$rc), see /var/log/offline-apt-install.log" >&2
+        exit "$rc"
+      fi
+      if command -v nmcli >/dev/null; then
+        systemctl enable NetworkManager
       fi
       '
 
     # Step 2: Disable networkd-wait-online (hangs on air-gapped network)
     - ln -sf /dev/null /target/etc/systemd/system/systemd-networkd-wait-online.service
 
-    # Step 3: Create first-boot.sh
+    # Step 3: Create first-boot.sh. rc.local runs it on every boot until the
+    # playbook succeeds (at most MAX attempts). A failure leaves
+    # /var/lib/pxe-firstboot.failed and a banner on the console (/etc/issue)
+    # and at SSH login (/etc/motd) pointing at /var/log/first-boot.log.
     - |
       curtin in-target --target=/target -- bash -c '
       cat <<"EOF" > /opt/first-boot.sh
       #!/bin/bash
+      MAX=5
+      STATE=/var/lib/pxe-firstboot
+      FAILED=/var/lib/pxe-firstboot.failed
+      mkdir -p "$STATE"
+      N=$(( $(cat "$STATE/attempts" 2>/dev/null || echo 0) + 1 ))
+      echo "$N" > "$STATE/attempts"
+      echo "=== first-boot attempt $N of $MAX, $(date -Is) ==="
+      banner_off() {
+        for f in /etc/issue /etc/motd; do
+          [ -f "$f" ] && sed -i "/^### PXE FIRST-BOOT BEGIN/,/^### PXE FIRST-BOOT END/d" "$f"
+        done
+      }
+      banner_on() {
+        banner_off
+        for f in /etc/issue /etc/motd; do
+          {
+            echo "### PXE FIRST-BOOT BEGIN"
+            echo "!!! PXE server setup (first-boot playbook) FAILED: $1"
+            echo "!!! Log: /var/log/first-boot.log   Marker: $FAILED"
+            echo "!!! $2"
+            echo "### PXE FIRST-BOOT END"
+          } >> "$f"
+        done
+      }
       # Expand root LV to full disk BEFORE playbook (playbook copies ~130GB of drivers+PPKGs)
       ROOT_DEV=$(findmnt -n -o SOURCE /)
       ROOT_DISK=$(lsblk -n -o PKNAME "$(readlink -f "$ROOT_DEV")" | tail -1)
@@ -82,37 +132,79 @@ autoinstall:
         pvresize "$PV_PART" 2>&1 || true
       fi
       lvextend -r -l +100%FREE /dev/mapper/ubuntu--vg-ubuntu--lv 2>&1 || true
+      RC=1
+      WHY="CIDATA (the installer USB) not found"
       CIDATA_DEV=$(blkid -L CIDATA)
       if [ -n "$CIDATA_DEV" ]; then
         mkdir -p /mnt/usb
-        mount "$CIDATA_DEV" /mnt/usb
-        if compgen -G "/mnt/usb/packages/*.deb" > /dev/null; then
-          dpkg -i /mnt/usb/packages/*.deb 2>/dev/null || true
-          dpkg -i /mnt/usb/packages/*.deb 2>/dev/null || true
-          dpkg --configure -a 2>/dev/null || true
+        if mount "$CIDATA_DEV" /mnt/usb; then
+          if [ -f /mnt/usb/playbook/pxe_server_setup.yml ]; then
+            cd /mnt/usb/playbook
+            rm -f "$STATE/nic-hint"
+            ansible-playbook -i localhost, -c local pxe_server_setup.yml
+            RC=$?
+            WHY="ansible-playbook exit code $RC"
+            # pxe-pick-nic leaves the reason it could not pick the imaging NIC
+            [ "$RC" -ne 0 ] && [ -s "$STATE/nic-hint" ] && WHY="$(head -1 "$STATE/nic-hint")"
+            cd /
+          else
+            WHY="no playbook/pxe_server_setup.yml on CIDATA"
+          fi
+          umount /mnt/usb
+        else
+          WHY="could not mount CIDATA ($CIDATA_DEV)"
         fi
-        if [ -f /mnt/usb/playbook/pxe_server_setup.yml ]; then
-          cd /mnt/usb/playbook
-          ansible-playbook -i localhost, -c local pxe_server_setup.yml
-        fi
-        umount /mnt/usb
       fi
-      sed -i "s|^/opt/first-boot.sh.*|# &|" /etc/rc.local
+      if [ "$RC" -eq 0 ]; then
+        echo "=== first-boot: playbook succeeded on attempt $N ==="
+        rm -f "$FAILED"
+        banner_off
+        sed -i "s|^/opt/first-boot.sh.*|# &|" /etc/rc.local
+        exit 0
+      fi
+      echo "=== first-boot: FAILED ($WHY), attempt $N of $MAX ==="
+      printf "attempt=%s of %s\nwhen=%s\nreason=%s\nlog=/var/log/first-boot.log\n" "$N" "$MAX" "$(date -Is)" "$WHY" > "$FAILED"
+      if [ "$N" -ge "$MAX" ]; then
+        sed -i "s|^/opt/first-boot.sh.*|# &|" /etc/rc.local
+        banner_on "$WHY (attempt $N of $MAX)" "Gave up retrying. Fix it, then run: sudo /opt/first-boot.sh after rm $STATE/attempts"
+      else
+        banner_on "$WHY (attempt $N of $MAX)" "It runs again at the next boot (fix the cause first, e.g. playbook/site-vars.yml on the USB)."
+      fi
+      exit "$RC"
       EOF
       chmod +x /opt/first-boot.sh
       '
 
-    # Step 4: Create rc.local
+    # Step 4: Create rc.local (the log is appended to, one block per attempt)
     - |
       curtin in-target --target=/target -- bash -c '
       cat <<"EOF" > /etc/rc.local
       #!/bin/bash
-      /opt/first-boot.sh > /var/log/first-boot.log 2>&1 &
+      /opt/first-boot.sh >> /var/log/first-boot.log 2>&1 &
       exit 0
       EOF
       chmod +x /etc/rc.local
       '
 
+    # Step 5: Real archive sources for later online maintenance (the
+    # install used a dead mirror on purpose, see apt: above).
+    - |
+      rm -f /target/etc/apt/sources.list.d/*.list /target/etc/apt/sources.list.d/*.curtin.orig
+      echo "# Ubuntu sources have moved to /etc/apt/sources.list.d/ubuntu.sources" > /target/etc/apt/sources.list
+      cat > /target/etc/apt/sources.list.d/ubuntu.sources <<"EOF"
+      Types: deb
+      URIs: http://archive.ubuntu.com/ubuntu/
+      Suites: noble noble-updates noble-backports
+      Components: main restricted universe multiverse
+      Signed-By: /usr/share/keyrings/ubuntu-archive-keyring.gpg
+
+      Types: deb
+      URIs: http://security.ubuntu.com/ubuntu/
+      Suites: noble-security
+      Components: main restricted universe multiverse
+      Signed-By: /usr/share/keyrings/ubuntu-archive-keyring.gpg
+      EOF
+
   user-data:
     disable_root: false
 

boot-tools/blancco/blancco-chain.ipxe

@@ -0,0 +1,14 @@
+#!ipxe
+
+dhcp
+echo SAN booting Blancco ISO...
+sanboot http://172.16.9.1/blancco/blancco.iso || goto failed
+goto end
+
+:failed
+echo
+echo FAILED!
+prompt Press any key for iPXE shell...
+shell
+
+:end

boot-tools/blancco/blancco-debug.ipxe

@@ -0,0 +1,48 @@
+#!ipxe
+
+echo =============================================
+echo  Blancco PXE Debug Boot
+echo =============================================
+echo
+
+echo [1/4] Network configuration...
+dhcp || echo DHCP FAILED
+echo   MAC:  ${net0/mac}
+echo   IP:   ${net0/ip}
+echo   GW:   ${net0/gateway}
+echo   DNS:  ${net0/dns}
+echo
+
+set server 172.16.9.1
+
+echo [2/4] Testing HTTP connectivity...
+imgfetch --name test http://${server}/blancco/config.img || echo HTTP FETCH FAILED
+imgfree test
+echo   HTTP to ${server}: OK
+echo
+
+echo [3/4] Loading kernel and initrd...
+echo   Fetching vmlinuz-bde-linux...
+kernel http://${server}/blancco/vmlinuz-bde-linux initrd=initrd-combined.img archisobasedir=arch archiso_http_srv=http://${server}/blancco/ copytoram=y cow_spacesize=50% memtest=00 vmalloc=400M ip=dhcp libata.allow_tpm=1 modprobe.blacklist=iwlwifi,iwlmvm,btusb rd.udev.timeout=10 || goto failed
+echo   Kernel loaded OK.
+echo
+echo   Fetching initrd-combined.img (43MB, may take a moment)...
+initrd http://${server}/blancco/initrd-combined.img || goto failed
+echo   Initrd loaded OK.
+echo
+
+echo [4/4] About to call boot command...
+echo
+echo !! Note the LAST kernel line visible before any freeze !!
+echo
+prompt Press any key to boot (or Ctrl-C for iPXE shell)... && goto doboot || shell
+
+:doboot
+boot || goto failed
+
+:failed
+echo
+echo !! BOOT FAILED !!
+echo
+prompt Press any key for iPXE shell...
+shell

boot-tools/blancco/blancco.ipxe

@@ -0,0 +1,17 @@
+#!ipxe
+
+dhcp
+set server 172.16.9.1
+
+echo Loading Blancco kernel...
+kernel http://${server}/blancco/vmlinuz-bde-linux initrd=initrd-combined.img archisobasedir=arch archiso_http_srv=http://${server}/blancco/ copytoram=y cow_spacesize=50% memtest=00 vmalloc=400M ip=dhcp libata.allow_tpm=1 modprobe.blacklist=iwlwifi,iwlmvm,btusb rd.udev.timeout=10 nomodeset || goto failed
+echo Loading initrd (combined)...
+initrd http://${server}/blancco/initrd-combined.img || goto failed
+echo All files loaded. Booting now...
+boot || goto failed
+
+:failed
+echo
+echo Blancco boot FAILED.
+prompt Press any key to drop to iPXE shell...
+shell

boot-tools/blancco/grub-blancco.cfg

@@ -3,22 +3,10 @@ set timeout=0
 
 insmod efinet
 insmod net
-insmod http
 insmod tftp
 net_bootp
 
-# Blancco via Ubuntu-kernel switch_root. This is the cmdline that produces
-# the slim Ubuntu-kernel-chain grubx64.efi. DO NOT flip this back to
-# vmlinuz-bde-linux / archiso_http_srv / copytoram=y - that was the Apr-14
-# regression (commit d6776f7) that put us into Blancco's narrow-NIC-driver
-# archiso path and hung on Dell Precision hardware. The Ubuntu kernel path
-# with our verbose, full-drivers/net/-tree kexec-initrd.img is what works.
-#
-# kexec-initrd.img is built by the pxe_server_setup.yml "Build Blancco PXE
-# initramfs" task (sweeps drivers/net/ + depmod). blancco-init.sh inside it
-# handles the rest: modprobe all common NICs, DHCP, download airootfs.sfs,
-# overlay mount, switch_root.
 menuentry "Blancco Drive Eraser" {
-    linux (http,10.9.100.1)/blancco/vmlinuz-ubuntu ip=dhcp
-    initrd (http,10.9.100.1)/blancco/kexec-initrd.img
+    linux (tftp,172.16.9.1)/blancco/vmlinuz-bde-linux archisobasedir=arch archiso_http_srv=http://172.16.9.1/blancco/ copytoram=y cow_spacesize=50% memtest=00 vmalloc=400M ip=dhcp libata.allow_tpm=1 modprobe.blacklist=iwlwifi,iwlmvm,btusb rd.udev.timeout=10
+    initrd (tftp,172.16.9.1)/blancco/intel-ucode.img (tftp,172.16.9.1)/blancco/amd-ucode.img (tftp,172.16.9.1)/blancco/config.img (tftp,172.16.9.1)/blancco/initramfs-bde-linux.img
 }

docs/ARCHITECTURE.md

@@ -16,8 +16,8 @@ systems.
 
 ## Network layout
 
-- PXE server static IP: `10.9.100.1/24` on an isolated subnet.
-- DHCP range served by dnsmasq: `10.9.100.10 - 10.9.100.100`, 12h leases.
+- PXE server static IP: `172.16.9.1/24` on an isolated subnet.
+- DHCP range served by dnsmasq: `172.16.9.10 - 172.16.9.100`, 12h leases.
 - Default gateway and DNS handed out via DHCP point at the PXE server itself.
 - The subnet has no route to the corporate LAN. Client traffic (Blancco BMC
   cloud, Intune enrollment) goes out via WiFi after Windows boots; PXE-time
@@ -29,7 +29,7 @@ systems.
 |---------------|-----------|------------------------------------------------------|
 | dnsmasq       | 67/udp    | DHCP. Hands out IPs and the next-server (TFTP) info. |
 | dnsmasq       | 69/udp    | TFTP. Serves `ipxe.efi` to firmware PXE clients.     |
-| Apache        | 80/tcp    | HTTP. Serves wimboot, boot.wim, Blancco binaries, Clonezilla, memtest, and proxies the webapp on /. |
+| Apache        | 80/tcp    | HTTP. Serves wimboot, boot.wim, Blancco binaries, Clonezilla, and proxies the webapp on /. |
 | Apache        | 4433/tcp  | HTTP. Serves `Altiris/iPXE/GetPxeScript.aspx` (the iPXE menu script). |
 | Samba         | 445/tcp   | SMB shares. WinPE mounts these to fetch image content during deployment. |
 | Flask webapp  | 9009/tcp  | Browser UI for image import, unattend editing, log/report viewing. |
@@ -112,9 +112,23 @@ WinPE; the Blancco and Clonezilla utilities require Secure Boot disabled.
 
    c. Clonezilla Live:
       iPXE loads vmlinuz + initrd over HTTP, fetches filesystem.squashfs.
+      With Secure Boot on, the Debian-signed kernel starts through Debian's
+      Microsoft-signed shim (clonezilla/shimx64.efi, iPXE shim command).
+      The menu checks the CPU (iPXE cpuid --ext 29): 64-bit CPUs get the
+      current release, 32-bit-only CPUs (XP-era Pentium 4/M, early Atom) get
+      clonezilla-i686/ (3.2.0-5, the last 32-bit Clonezilla) over legacy BIOS.
+      "Clonezilla: back up / restore this PC" ask for the machine number,
+      mount \\<server>\clonezilla as the clonezilla Samba user
+      (ocs_repository smb3://, password from clonezilla_smb_password) and
+      run clonezilla-scripts/pxe-cz.sh (ocs_prerun downloads it,
+      ocs_live_run runs it): images are <machine>-<YYYY-MM-DD-HHMM> with
+      pxe-meta.txt, checked after saving; restore lists that machine's
+      images and restores with -k1 -r (larger disks get proportionally
+      larger partitions). "Clonezilla: manual" is the interactive mode.
 
-   d. Memtest86+:
-      iPXE loads memtest.efi.
+   Memory testing is not on the menu: Dell PCs have a built-in test
+   (F12 at power-on, Diagnostics). Memtest86+ was removed because it is
+   unsigned and needed Secure Boot off.
 ```
 
 ## Windows imaging lifecycle (gea-* images)
@@ -166,7 +180,7 @@ USB installer (2 partitions: ISO + CIDATA)
 Ubuntu auto-install + first-boot Ansible playbook
     |
     v
-Configured PXE server (10.9.100.1) ----+
+Configured PXE server (172.16.9.1) ----+
                                        |
 Windows PCs running Upload-Image.ps1 --+--> Image content (SMB, webapp import)
                                        |
@@ -179,9 +193,7 @@ PXE clients (UEFI -> iPXE -> Blancco) -+--> Drive erasure + report upload
 ## Where things live
 
 - Ansible playbook: `playbook/pxe_server_setup.yml`. Single file, idempotent.
-- WinPE startup script (template): `playbook/startnet.cmd` (canonical) and
-  `startnet-template.cmd` (mirror copy at repo root for editor convenience).
-  The playbook injects this into `Windows/System32/startnet.cmd` inside the
+- WinPE startup script: `playbook/startnet.cmd`. The playbook injects this into `Windows/System32/startnet.cmd` inside the
   `boot.wim` it deploys to `/var/www/html/win11/sources/`.
 - iPXE menu script source: embedded in the playbook (`Create GetPxeScript.aspx`
   task); deployed to `/var/www/html/Altiris/iPXE/GetPxeScript.aspx`.

docs/OWNERSHIP.md

@@ -0,0 +1,95 @@
+# Who owns what
+
+Every bug that cost a day in this pipeline has had the same shape: two systems
+both setting the same thing, and whichever ran last silently won. This file says
+who owns each concern so the next person deletes the loser instead of adding a
+third writer.
+
+All four examples below are real, from 2026-08-06.
+
+## Computer name - the PPKG owns it
+
+The provisioning package declares:
+
+```xml
+<DNSComputerName>F%SERIAL%</DNSComputerName>
+```
+
+so a bay comes up as `F<serial>`.
+
+`run-enrollment.ps1` used to also run `Rename-Computer -NewName "E$serial"`.
+Both are pending renames; last writer wins at reboot. The script ran twice, and
+its second run landed after the package had already queued `F579C144`, so the
+bay came up `E579C144` with the package reporting no errors at all.
+
+**Rule:** nothing in this repo renames a machine. If the naming convention
+changes, it changes in the package.
+
+## Drive letters - PESetup owns them
+
+PESetup hardcodes `W:` in nine places - every copy destination, both DISM
+offline sessions, `bcdboot`, `reagentc` - and creates it during its own disk
+preparation.
+
+`startnet.cmd` briefly had a volume finder that scanned for "the applied
+Windows volume" and `diskpart`-assigned it to `W:`. On a re-image it found the
+*previous* install, relabelled a partition PESetup was about to erase, and every
+staging copy failed into a volume that no longer existed.
+
+**Rule:** wait for `W:\Windows\System32\config\system` - the hive only exists
+once the WIM apply has written it. Never run `diskpart` while PESetup is
+running.
+
+See `docs/PESETUP-INTERNALS.md`.
+
+## Enrollment - the PPKG owns it, the orchestrator drives reboots
+
+The SFLD package joins Entra using the BPRT token in
+`0__Accounts_Azure.provxml`. A human then assigns the device category in Intune.
+
+The vendor's `Start-BulkEnrollOrchestrator.ps1` has two branches. The normal one
+aborts the package's own reboot, registers `AutoSecondReboot`, and drives the
+Entra join to completion. The `-ManualFallback` one runs `sysprep /oobe /reboot`
+- it is an interactive escape hatch for handing a machine back to OOBE, meant to
+be triggered by a person.
+
+The shopfloor unattend registered `-ManualFallback` as an at-logon scheduled
+task. So OOBE completed, autologon fired, and four seconds later the machine
+syspreped itself back to OOBE, losing the deployment chain permanently.
+
+**Rule:** shopfloor bays enrol. Never wire `-ManualFallback` to anything
+automatic.
+
+## Kiosk URLs - GE-Enforce owns them
+
+`plugins/geenforce/seed_display_scope.py` in shopdb-flask is authoritative:
+
+| display-type.txt | route |
+|---|---|
+| `Dashboard` | `/shopdb/shopfloor` |
+| `Lobby` | `/shopdb/tv` |
+| `3DPrintRoom` | `/shopdb/parts-kiosk` |
+
+Its dispatcher prefers the server-side role from Settings > Dashboard Defaults
+(resolved by device IP), falls back to `C:\Enrollment\display-type.txt`, writes
+the Startup shortcut itself, and **sweeps** any shortcut matching
+`shopfloor-dashboard` or `/shopdb/`.
+
+`site-config.json` also carries `edgeHomepage` per display type. Those are a
+backstop for the window before the kiosk installer runs - a stale value there
+gets deleted on the next enforce cycle rather than honoured.
+
+**Rule:** if a kiosk points at the wrong page, fix the GE-Enforce scope first.
+Keep `site-config.json` correct, but do not expect it to win.
+
+## Repo vs share
+
+The share is production; the repo is meant to describe it. Drift runs both ways -
+live hand-edits nobody committed, and repo fixes never deployed.
+
+`scripts/share-drift.py` classifies every mapped pair as `git-owned` (repo wins,
+safe to push) or `unreconciled` (diverged, nobody has decided). It reports and
+never writes. Run it before a build day; `scripts/preflight.py` covers the rest.
+
+The unattends are `unreconciled` on purpose: the live copies are ~17 KB and the
+repo copies ~12 KB, so pushing the repo would regress production.

docs/PESETUP-INTERNALS.md

@@ -0,0 +1,278 @@
+# PESetup.exe internals
+
+What GE Image Setup actually does, start to finish. Written from the decompiled
+assembly, not from observation, because several long-standing beliefs about this
+tool turned out to be wrong and cost weeks of debugging.
+
+**Version documented:** 4.0.0.17 (`Sources/PESetup.exe`, PE32+ native apphost
+wrapping a .NET 6 single-file bundle, 468 embedded files).
+
+**Version in production:** 4.0.0.20, as of 2026-08-06 — the media reports it in
+its own log (`AppVersion: 4.0.0.20`). Everything in this document was verified
+against a 4.0.0.20 run on bay 579C144 that day: the media drive resolved to `Z:\`,
+`W:` was created by `PrepareDisk` and used for every copy destination, the fallback
+unattend at `Deploy\FlatUnattendW10.xml` was the one loaded, and driver selection
+matched `win11_optiplexd13mlk7020_a09.zip` by model. The decompiled detail below has
+not been re-derived from the 4.0.0.20 binary, so treat exact line-level claims as
+4.0.0.17 and the observed behaviour as current.
+
+## How to re-derive this
+
+The managed code is not directly readable - the outer PE has no managed
+metadata, so ILSpy refuses it. Extract `PESetup.dll` from the bundle first:
+
+```python
+# .NET single-file bundle: signature is SHA-256 of ".net core bundle";
+# the int64 EIGHT BYTES BEFORE it is the bundle header offset.
+SIG = bytes([0x8b,0x12,0x02,0xb9,0x6a,0x61,0x20,0x38,
+             0x72,0x7b,0x93,0x02,0x14,0xd7,0xa0,0x32])
+i = data.find(SIG)
+header = struct.unpack_from('<q', data, i - 8)[0]
+# header: uint32 major, uint32 minor, int32 count, 7-bit-prefixed bundle id,
+#         then (v2+) 4 x int64 deps/runtimeconfig, then uint64 flags.
+# each entry: int64 offset, int64 size, (v6+) int64 compressedSize,
+#             byte type, 7-bit-prefixed path.  Compressed entries are raw
+#             deflate (zlib.decompress(raw, -15)).
+```
+
+Then `ilspycmd -t <TypeName> PESetup.dll`.
+
+## Paths it hardcodes
+
+From `PESetup.Models.GlobalSettings`. All are relative to the MEDIA drive
+(`Z:\`, whichever winpeapps share startnet mapped) unless stated.
+
+```
+ControlDir            \Deploy\Control
+ToolsDir              \Deploy\Tools\GE
+SoftwarePackagesDir   \Deploy\Applications
+HWPackagesDir         \Deploy\HW_Apps
+UnattendFile          \Deploy\Tools\GE\XML\FlatUnattendW10.xml
+UnattendFile2         \Deploy\FlatUnattendW10.xml        (fallback)
+DiskPartDir           <exe dir>\DiskPart
+ConfigSkipPackagesFile      skip.json
+ConfigDisableAutoStartFile  disableauto.json
+ExpirationDuration    30 days
+AutoStartCountDown    31
+MinRequiredSpaceWithoutCompression  128849018880  (120 GB)
+```
+
+**`W:` IS HARDCODED, EVERYWHERE.** Not derived, not configurable, not a
+convention this project invented:
+
+```csharp
+CopyPackages    destDir = "W:\\" + SoftwarePackagesDir
+CopyHWPackages  destDir = "W:\\" + HWPackagesDir
+CopyTools       destDir = "W:\\GE"
+CopyDrivers     destinationPath = "W:\\Drivers\\" + <zip name without extension>
+ApplyImage      destination = "W:\\"
+CreateBCD       "W:\\Windows\\System32\\bcdboot.exe", "W:\\Windows /l en-US"
+ApplyPackages   DismApi.OpenOfflineSession("W:\\")
+CopyLogs        tags -> "w:\\windows\\system32\\"
+```
+
+PESetup's own disk preparation is what makes W: exist. Any downstream script
+that hunts for "the applied volume" is solving a problem this tool does not
+have. `diskpart list volume` on a machine mid-image shows `Volume 0  W  Windows
+NTFS  237GB  Healthy`.
+
+## The five working steps
+
+Keys as they appear in the log: `workingstep_gatherdata`, `workingstep_selectos`,
+`workingstep_prepare`, `workingstep_copy`, `workingstep_apply`,
+`workingstep_finalize`, `workingstep_reboot`.
+
+### 1. GATHER DATA
+
+Four operations, all automatic:
+
+| Operation | What it establishes |
+|---|---|
+| `GatherDataMediaDrive` | `ImageInfo.MediaDrive`, e.g. `Z:\` |
+| `GatherDataBootDrive` | `ImageInfo.BootDrive`, always `X:\` (WinPE RAM disk) |
+| `GatherDataSelection` | BIOS version/type, serial, secure boot, OS, languages, model, **driver** |
+| `GatherDataImageDisk` | picks the physical disk and logs its partitions |
+
+`GatherDataSelection` is where most decisions are made:
+
+1. **Secure boot is mandatory.** `SecurebootEnabled != 1` fails the step outright.
+2. Reads `Control\LanguagePacks.json`.
+3. `SystemHelpers.GetModel()` and `GetManufacturer()` off WMI.
+4. Reads `Control\HardwareDriver.json` and `Control\hw_applications.json`.
+   NOTE: it reads **HardwareDriver.json**, not the `hw_drivers.json` that also
+   sits in that folder. Editing the wrong one changes nothing.
+5. **Virtual platform check.** If ANY driver entry has a manufacturer containing
+   "virtual platform", the tool goes into virtual-only mode: it takes
+   `list[0]` as the driver and then REQUIRES the machine to look virtual
+   (model/serial/BIOS containing VIRTUAL, VMWARE, XEN, QEMU, VirtualBox, vmw).
+   On real hardware that is a hard failure. A stray "virtual platform" entry in
+   the catalogue therefore breaks imaging for every physical machine.
+6. Otherwise `GetDriverByModel` (below).
+7. If `Control\skip.json` exists, package installation is skipped.
+
+### 2. SELECT OS
+
+Operator-facing. Warns when the media holds an LTSC image ("99% of the time only
+for ShopFloor"). Also shows days-to-expiry - the media expires 30 days after
+build (`ExpirationDuration`).
+
+### 3. PREPARE
+
+| Operation | What it does |
+|---|---|
+| `PrepareDoDisking` | copies `<exedir>\DiskPart\diskpartEFI.txt` to `X:\diskpartEFI<n>.txt`, then `cmd /c DISKPART /S X:\diskpartEFI<n>.txt` |
+| `PrepareUnattend` | loads the unattend, substitutes, saves to `X:\Unattend.xml` |
+
+`PrepareUnattend` in detail:
+
+```csharp
+text = MediaDrive + UnattendFile;              // \Deploy\Tools\GE\XML\FlatUnattendW10.xml
+if (!File.Exists(text)) text = MediaDrive + UnattendFile2;   // \Deploy\FlatUnattendW10.xml
+xml.Load(text);
+xml.InnerXml = xml.InnerXml.Replace("%serialnumber%", imageinfo.Serialnumber);
+xml.InnerXml = xml.InnerXml.Replace("*arch*", arch);
+SetPackages(arch, xml, imageinfo);             // needs Control\Packages.xml
+xml.Save("X:\\Unattend.xml");
+```
+
+Two tokens are substituted: `%serialnumber%` and `*arch*`. `SetPackages` merges
+in servicing packages from `Control\Packages.xml` and `Control\PackageGroups.xml`.
+
+The unattend that is USED is the one on the media at `Tools\GE\XML\` if present,
+otherwise `Deploy\FlatUnattendW10.xml`. A shopfloor variant only takes effect if
+it occupies one of those two paths.
+
+### 4. COPY
+
+Four operations. **None of them filters, and none of them reads the unattend.**
+
+| Operation | Source | Destination | Rule |
+|---|---|---|---|
+| `CopyTools` | `Z:\Deploy\Tools\GE` | `W:\GE` | whole directory, recursive |
+| `CopyPackages` | `Z:\Deploy\Applications` | `W:\Deploy\Applications` | whole directory, recursive |
+| `CopyHWPackages` | `Z:\Deploy\HW_Apps` | `W:\Deploy\HW_Apps` | whole directory; **skipped if `IsVirtual` or `HWApps == null`** |
+| `CopyDrivers` | one `.zip` chosen by model | `W:\Drivers\<zipname>` | **unzipped**, not copied |
+
+`ExecuteInternalCopy` walks `GetDirectoriesRecursive(source, includeSubDirs:
+true)` then `Directory.GetFiles(item, "*")`. Every file, every subdirectory. It
+clears the read-only attribute on each copy.
+
+**Consequences worth designing around:**
+
+- Anything dropped into `Deploy\Applications` on the media lands on the target.
+  No manifest, no registration, no unattend reference required.
+- The copy is FAIL-FAST. One exception on one file returns false and fails the
+  whole step with `copy_packages_error`. A locked or unreadable file in
+  `Applications` fails imaging, it does not get skipped.
+- Progress is computed from total directory size up front, so bulky additions
+  visibly lengthen this phase.
+
+### 5. APPLY
+
+| Operation | What it does |
+|---|---|
+| `ApplyImage` | `install.wim` from `OperatingSystem.json`'s `destinationDir`, at `wimindex`, applied to `W:\` |
+| `ApplyPackages` | DISM offline session on `W:\`, adds servicing packages; logs to `X:\ApplyOSPatch_<n>.log` |
+| `ApplyLanguagePacks` | same pattern, `X:\ApplyLanguagePack_<n>.log` |
+| `ApplyUnattend` | DISM offline session on `W:\`, applies `X:\Unattend.xml`; logs to `X:\ApplyUnattend.log` |
+| `CreateBCD` | `W:\Windows\System32\bcdboot.exe W:\Windows /l en-US` |
+| `CopyWinRE` | `reagentc /setreimage /path T:\Recovery\WindowsRE /target W:\Windows` |
+
+All DISM work uses `W:\imagetemp` as scratch and deletes it afterwards.
+
+### 6. FINALIZE
+
+`CopyLogs`:
+- `CopyTagFiles(ToolsDir)` - every `*.tag` from the tools dir to
+  **`w:\windows\system32\`**. This is how build/media tags reach the OS.
+- `CopyLogFiles("X:\\")` and `CopyXMLFile("X:\\")` - the PESetup log and the
+  generated unattend are preserved.
+
+## Driver selection, in full
+
+This is the part most worth understanding, because a miss is nearly silent.
+
+```csharp
+// GatherDataSelection
+List<HardwareDriversRootObject> list =
+    JSONHelpers.ReadJSON_Driver(MediaDrive + ControlDir + "\\HardwareDriver.json");
+...
+imageinfo.HWDriver = GetDriverByModel(list, imageinfo.Model);
+if (imageinfo.HWDriver == null) {
+    // status = Warning, message "driver for [MODEL] not found"
+    return operationResult;
+}
+```
+
+```csharp
+private static HardwareDriversRootObject? GetDriverByModel(List<...> drivers, string model)
+{
+    string modelFamily = "";
+    if (model.ToUpper().Contains("LATITUDE"))  modelFamily = "Latitude";
+    if (model.ToUpper().Contains("OPTIPLEX"))  modelFamily = "Optiplex";
+    if (model.ToUpper().Contains("PRECISION")) modelFamily = "Precision";
+
+    return drivers.Where(d => {
+        if (!string.IsNullOrEmpty(modelFamily) &&
+            !d.family.ToLower().Contains(modelFamily.ToLower())) return false;
+        foreach (string token in d.modelswminame.Split(','))
+            if (model.ToLower().Contains(token.ToLower())) return true;   // SUBSTRING
+        return false;
+    }).ToList()?.FirstOrDefault();
+}
+```
+
+Then:
+
+```csharp
+sourceFilePath = MediaDrive + HWDriver.destinationDir.Replace("*destinationdir*","")
+                 + "\\" + HWDriver.fileName;
+destinationPath = "W:\\Drivers\\" + Path.GetFileNameWithoutExtension(sourceFilePath);
+StartUnzipAsync(...)
+```
+
+### Four traps in that logic
+
+1. **A miss is a WARNING, not a failure.** Imaging continues and the machine
+   comes up with no drivers - no NIC, no WiFi, so DNS fails and anything
+   network-dependent at first boot fails with it. Symptoms appear far from the
+   cause.
+2. **Matching is substring, first match wins.** A token like `7020` matches any
+   model string containing 7020. Order in the JSON decides ties.
+3. **The family filter knows only three Dell lines.** Anything else - MicroPCs,
+   NUCs, non-Dell - skips the filter and depends entirely on
+   `modelswminame` substrings being right.
+4. **One "virtual platform" entry hijacks the whole catalogue** (see GATHER
+   DATA step 5) and fails every physical machine.
+
+## What this means for startnet.cmd
+
+Three beliefs encoded in `startnet.cmd` do not survive contact with the source:
+
+- *"The applied volume might not be W:."* PESetup hardcodes W: in nine places
+  and creates it during disk prep. The volume finder, the diskpart
+  reassignment and the `W:` wait loop are machinery around a non-problem.
+- *"We must copy our payload from the enrollment share after imaging."* Anything
+  in `Deploy\Applications` on the media is copied to `W:\Deploy\Applications`
+  by PESetup itself, and is readable at `C:\Deploy\Applications` at first boot.
+- *"Display MicroPCs failed because the applied volume was not W:."* Worth
+  re-testing. A missing `HardwareDriver.json` match produces the same
+  end-state - no drivers, no network - via a completely different route, and
+  that route only logs a warning.
+
+## Files PESetup reads from the media
+
+```
+Deploy\Control\HardwareDriver.json     driver catalogue        (NOT hw_drivers.json)
+Deploy\Control\hw_applications.json    per-model applications
+Deploy\Control\OperatingSystem.json    OS list, wim path, wimindex
+Deploy\Control\LanguagePacks.json      language packs
+Deploy\Control\packages.json           servicing packages
+Deploy\Control\Packages.xml            unattend package merge
+Deploy\Control\PackageGroups.xml       package grouping
+Deploy\Control\Media.tag               media identity
+Deploy\Control\skip.json               presence = skip package install
+Deploy\Control\disableauto.json        presence = disable autostart
+Deploy\Tools\GE\XML\FlatUnattendW10.xml   preferred unattend
+Deploy\FlatUnattendW10.xml                fallback unattend
+```

docs/SITE-CUSTOMIZATION.md

@@ -20,13 +20,67 @@ contribute a `config/sites/<sitename>.yaml` template back to the repo.
 
 ### Network
 
+The imaging NIC (isolated imaging LAN, static 172.16.9.1, the only NIC that
+serves DHCP/TFTP/HTTP boot/SMB) is pinned by MAC. The GE corporate side (DHCP
+client; SSH and the webapp on 9009 only) is optional. Both MACs in
+`playbook/site-vars.yml` (copy `playbook/site-vars.example.yml`) may be left
+empty:
+
+- `pxe_nic_mac` empty: the first boot picks the imaging NIC itself
+  (`pxe-pick-nic --auto`). It takes the one wired port with a link, and only
+  if `pxe-nic-check` calls it isolated, then pins it; the choice is in
+  `/etc/pxe-server/nic-pick.conf` and is never re-guessed at boot. So during
+  the install plug in ONLY the imaging switch. When it cannot tell (no link,
+  two links, or that port sees GE) it changes nothing and the console says
+  to run `sudo pxe-pick-nic`: pull the imaging cable and plug it back in,
+  and the port that blinked is the imaging one. Run it again after swapping
+  a dead USB NIC, then re-run the playbook.
+- `corp_nic_mac` empty: every other wired port (`en*`, `eth*`) is a DHCP
+  client, so the GE cable can go into any of them, at install or later.
+  dnsmasq is pinned to the imaging NIC (`interface=`) and serves only the
+  imaging subnet, and those ports ignore DHCP offers from 172.16.9.1. UFW
+  allows SSH and 9009 by source, not by interface.
+- `corp_nic_mac` set: that port alone is the GE NIC, named `corp0` (as on
+  the WJ server).
+
+The first-boot playbook pins the result in netplan (names `pxe0` / `corp0`,
+overridable), dnsmasq, UFW and Samba.
+
 | Value             | Default              | Where it lives                                                                 |
 |-------------------|----------------------|--------------------------------------------------------------------------------|
-| PXE server IP     | 10.9.100.1           | `playbook/pxe_server_setup.yml` (dnsmasq config, iPXE script, samba conf, webapp env), `playbook/startnet.cmd` (mount paths), `boot-tools/blancco/grub-blancco.cfg` (TFTP/HTTP URLs) |
-| PXE subnet        | 10.9.100.0/24        | Same as above, plus `playbook/pxe_server_setup.yml` (UFW rules)                |
-| DHCP range        | 10.9.100.10-100      | `playbook/pxe_server_setup.yml` (dnsmasq config)                               |
+| PXE server IP     | 172.16.9.1           | `playbook/pxe_server_setup.yml` (dnsmasq config, iPXE script, samba conf, webapp env), `playbook/startnet.cmd` (mount paths), `boot-tools/blancco/grub-blancco.cfg` (TFTP/HTTP URLs) |
+| PXE subnet        | 172.16.9.0/24        | Same as above, plus `playbook/pxe_server_setup.yml` (UFW rules)                |
+| DHCP range        | 172.16.9.10-100      | `playbook/site-vars.yml` (`pxe_dhcp_start`, `pxe_dhcp_end`)                    |
+| NIC MACs / names  | (picked at install) / pxe0, corp0 | `playbook/site-vars.yml` (`pxe_nic_mac`, `corp_nic_mac`, `pxe_nic_name`, `corp_nic_name`) |
 | Hostname          | pxeserver            | `autoinstall/user-data` (identity.hostname)                                    |
 
+### Access from the GE corporate network
+
+SSH (password auth, the shared `pxe` password) and the webapp on 9009 (no
+login, runs as root) are reachable on the corp NIC. By default from ALL of
+GE, as before, so a re-run never locks anyone out; the play prints a loud
+warning on every run while that is so. Set these in `playbook/site-vars.yml`:
+
+| Var                      | Default | Effect |
+|--------------------------|---------|--------|
+| `corp_admin_cidrs`       | `[]`    | List of admin subnets/hosts, e.g. `["10.134.48.0/24", "3.12.34.56/32"]`. When non-empty, UFW allows 22 and 9009 from these only (on `corp_nic_name` when `corp_nic_mac` is set, else on any interface) and drops the any-source rules. The play refuses (nothing changed) if an entry is invalid or your own SSH session is not inside one of them. The imaging NIC keeps its rules. |
+| `corp_ssh_password_auth` | `true`  | `false` adds `/etc/ssh/sshd_config.d/10-pxe-corp-auth.conf`: `PasswordAuthentication no`, re-allowed by a `Match Address` block for `pxe_subnet` and localhost. Keys only from GE. The play refuses while `pxe` has no `~/.ssh/authorized_keys`, and removes the drop-in again if `sshd -t` rejects it. |
+| `allow_disruptive`       | `false` | Re-runs while imaging is active (SMB sessions on 445, or DHCP leases granted in the last `pxe_busy_window_min` = 30 min) do not bounce the NICs or restart dnsmasq/Apache/Samba; a needed network change stops the play. `-e allow_disruptive=true` overrides. |
+
+Recommended for a production box: `corp_admin_cidrs` set to the admin
+desks' subnet, then (after `ssh-copy-id`) `corp_ssh_password_auth: false`.
+
+### Re-running the playbook over SSH (from the GE side)
+
+The network step refuses before changing anything when the NIC that
+`pxe_nic_mac` names holds the default route, a DHCP lease, or the route to
+your SSH client (swapped MACs or cables). When it does apply, it arms a
+120 s auto-revert timer (`pxe-netplan-revert-*`), checks the names, the
+imaging address and that the corp NIC (or, without one pinned, every other
+port that had an address) gets its IPv4 back within 30 s, and
+restores the previous netplan config AND NIC names on any failure. Backups:
+`/var/backups/netplan-<timestamp>/`.
+
 ### Identity and credentials
 
 | Value                       | Default                               | Where it lives                                          |
@@ -64,6 +118,31 @@ The repo defines seven image types (see `playbook/pxe_server_setup.yml`,
 
 Trim or extend this list and the matching `shopfloor_types` filter as needed.
 
+### Engineering Layer (gea-engineer)
+
+Handled by the repo; nothing to work out per site except the payload.
+
+- `playbook/engineering/Install-EngineeringLayer.ps1` is deployed by the
+  playbook to `gea-engineer/Deploy/Applications/extra_engineering/`.
+- `FlatUnattendW10-engineer.xml` runs it twice:
+  - specialize Order 37 (`-StageOnly`) copies the payload and the script to
+    `C:\PreInstall\engineering` while `C:\Deploy` exists;
+  - first logon Order 11 installs from that copy. The bulk-enrollment
+    `DeleteDeployDir` task removes `C:\Deploy` on the next boot, so a PC
+    that reboots before the employee signs in would otherwise install
+    nothing and show no icon.
+- After the install it makes sure the "Configure my Engineering Layer"
+  icon is on the Public desktop (until the PC is configured), and registers
+  Active Setup so a later user gets the icon if someone else already used
+  it. The employee clicks it once, on the GE network: it maps V: and runs
+  `install_local_new.cmd` from GE's share, which removes the icon.
+- Log on the PC: `C:\Logs\Engineering\install-engineering-layer.log`.
+
+The site supplies the payload beside the script, in
+`gea-engineer/Deploy/Applications/extra_engineering/`:
+`engineering_layer/Engineering_Install_v3.1.exe` and `prereqs/`
+(.NET 3.5 sxs cabs, VC++ redists), about 650 MB.
+
 ### PC types (shopfloor sub-types)
 
 `playbook/shopfloor-setup/` contains per-PC-type install logic. The current
@@ -80,8 +159,7 @@ A site without CMMs can drop the CMM type and its installers entirely.
 
 ### GCCH bulk-enrollment PPKGs
 
-PPKG filenames are baked into `playbook/startnet.cmd` and
-`startnet-template.cmd`. They are tied to the GE Aerospace tenant. Other
+PPKG filenames are baked into `playbook/startnet.cmd`. They are tied to the GE Aerospace tenant. Other
 sites/tenants will have their own PPKGs with different filenames.
 
 | PPKG enrollment menu choice | Default filename                                              |
@@ -143,10 +221,12 @@ Blob storage account.
 ### Image-upload paths on Windows
 
 `scripts/Upload-Image.ps1` defaults to:
-- `\\10.9.100.1\image-upload` as the destination
+- `\\172.16.9.1\image-upload` as the destination
 - `C:\ProgramData\GEAerospace\MediaCreator\Cache\` as the source
 
-Update both for a different site.
+Update both for a different site (`-Server`, `-CachePath`; `-WebPort` if the
+webapp is not on 9009). The script checks every file on the server through
+the webapp before the Image Import page will accept the upload.
 
 ## Recommended forward state
 
@@ -156,10 +236,10 @@ A site config file should drive substitution at build time. Proposed schema:
 # config/sites/<sitename>.yaml
 site:
   name: westjeff
-  pxe_server_ip: 10.9.100.1
-  pxe_subnet: 10.9.100.0/24
-  dhcp_range_start: 10.9.100.10
-  dhcp_range_end: 10.9.100.100
+  pxe_server_ip: 172.16.9.1
+  pxe_subnet: 172.16.9.0/24
+  dhcp_range_start: 172.16.9.10
+  dhcp_range_end: 172.16.9.100
   hostname: pxeserver
 
 credentials:

docs/ZERO-TOUCH-IMAGING-PROPOSAL.md

@@ -0,0 +1,695 @@
+# Zero-touch, ShopDB-driven imaging - proposal
+
+**Status:** proposal, nothing built
+**Written:** 2026-08-06
+**Author's note:** every claim about current behaviour below is from evidence
+gathered on 2026-08-06 - decompiled binaries, live logs off bay 579C144, and the
+live share. Where something is inferred rather than observed it says so.
+
+---
+
+## 1. What we want
+
+Two ideas, one architecture.
+
+**A. The image becomes thin.** It carries only what must happen at image time -
+partition, apply the WIM, join Entra, install the enforce client. Everything else
+(PC type, subtype, tool association, apps, settings) is data, pulled at first
+boot from the ShopDB-Flask API and enforced continuously by GE-Enforce.
+
+**B. Imaging becomes a job, not a menu.** Open a machine in ShopDB, click
+*Create this PC*, pick the zeroed box that is sitting in WinPE waiting, and it
+images start to finish with nobody touching the keyboard - reporting progress
+onto that machine's record in real time.
+
+Between them: no menus in WinPE, no per-type media, no decisions baked into text
+files by whoever happened to be standing at the bay.
+
+---
+
+## 2. Why - what today actually costs
+
+Today every decision is made in WinPE, written to files, and carried through a
+chain where each link can fail silently:
+
+```
+startnet.cmd  ->  unattend (4 passes)  ->  FirstLogonCommands (18 orders)
+              ->  ppkg  ->  DSC  ->  GE-Enforce
+```
+
+On 2026-08-06 alone, that chain produced:
+
+| Failure | Root cause | How long it hid |
+|---|---|---|
+| Every build stopped at a dialog | one unattend `Path` at 676 chars against a 259 limit | ~1 day, and it masked the next two |
+| Bays staged nothing, silently | a volume scan raced PESetup's `diskpart` and staged into a partition being erased | weeks (4 Display bays sat "green") |
+| Deployment destroyed 4s after autologon | an at-logon task ran `-ManualFallback`, which is `sysprep /oobe /reboot` | until traced through Panther |
+| Machines named `E<serial>` not `F<serial>` | our script re-applied a rename over the package's own | unknown |
+| Six copies reported success having moved 0 bytes | unconditional `echo` after `robocopy` | weeks |
+
+The pattern is identical in every case: **a decision made early, carried far, and
+verified nowhere.** Moving decisions to a running, networked machine with an API
+and a UI makes them recoverable - re-runnable, correctable, and observable.
+
+---
+
+## 3. What we already have to build on
+
+This is not a greenfield project. Most of the mechanism exists.
+
+### 3.1 ShopDB-Flask
+- Assets keyed by serial; CMM bays, measuring tools, machine numbers already modelled
+- Collector API: `POST /shopdb/api/collector/computers` (X-API-Key), ingests inventory by serial
+- GE-Enforce plugin: scopes, manifests, **content-addressed payload store**
+  (`instance/geenforce/payloads/<sha256>`), `GET /api/geenforce/payload/<sha256>`
+- Display scope (`plugins/geenforce/seed_display_scope.py`) already proves the pattern:
+  read a local subtype, prefer a **server-side role resolved by device IP**, pull
+  payloads over HTTPS, write the kiosk shortcut, sweep stale ones, self-heal each cycle
+- Per-device role API: `GET /api/dashboarddefaults/display-role`
+
+### 3.2 PXE server
+- Per-bay state: `/var/log/pxe-imaging/<serial>.json` with stage history
+- `winpe-status-push.ps1` already POSTs stage updates from WinPE
+- Data-driven menus already: `menu.json` on the share, rendered by
+  `select-shopfloor-type.ps1`, edited by the webapp
+- Imaging dashboard with per-bay tiles
+- As of today: staging verification, imaging-log harvest to
+  `enrollment/imaging-logs/<serial>/`, `preflight.ps1` at the bay,
+  `preflight.py` + `lint-unattend.py` + `lint-driver-catalogue.py` +
+  `share-drift.py` on the server
+
+### 3.3 Hardware
+- Second NIC already present and unused: `enp0s31f6` (onboard, `e1000e`, currently down)
+- PXE LAN currently on a USB adapter, `enx34c8d6b11010`
+- That adapter was silently capped at USB 2.0 (327 Mb/s measured); moved to a
+  USB 3 port on 2026-08-06 and now runs at line-rate gigabit (**937 Mb/s measured**)
+
+---
+
+## 4. Target architecture
+
+### 4.1 Three (or one) pre-imaged types
+
+Proposed: **Displays, Inspection, Shopfloor** as pre-imaged stock, with the
+subtype chosen later by the user at first boot.
+
+**Open question worth settling early:** if the base image is identical and all
+configuration comes from the API, what actually differs between the three?
+Drivers are selected by PESetup per *model*, not per type. Unless disk layout or
+a must-be-offline application differs, **one image** is better - three media trees
+mean three things to keep in sync, and drift is what caused the day-long outage.
+
+### 4.2 First-boot selection
+
+A friendly PS1 runs when no PC type is recorded yet:
+
+```
+Inspection  ->  CMM | Genspect | Wax Trace | Keyence
+                 └─ CMM / Keyence / WaxTrace -> which measuring tool?
+                    (list served from ShopDB assets, not a CSV)
+Displays    ->  Lobby | Dashboard | 3D Print Kiosk
+Shopfloor   ->  Collections | No Collections | Common | Heattreat | Part Marker | ...
+```
+
+The tool selection is the important half: it drives PC-DMIS version, FormTracePak
+version, DODA flag, NTLARS/eDNC registry, UDC settings, machine number.
+
+**The network constraint that shapes this.** ShopDB is only reachable once the
+bay has joined the **AESFMA wifi SSID** - not on the imaging LAN, and not
+necessarily at first boot. So a first-boot selection UI cannot assume the API is
+there. It must either work offline and sync later, or wait. Confirmed on
+579C144: the bay held `172.16.9.81` and `172.24.19.142`, neither in the
+production ranges, and `sync_intune` sat retrying every 30 seconds.
+
+**The pattern that solves it, already built and worth reusing.**
+`Install-ShopdbKiosk-WhenOnline.ps1` is a SYSTEM task armed at imaging that does
+nothing until ShopDB answers, then acts once, verifies, and unregisters itself.
+Any step in the new architecture that needs the API - selection sync, config
+pull, enrollment completion - can use the same shape rather than assuming
+connectivity.
+
+**Design points:**
+
+- **Server is the source of truth.** The selection POSTs to ShopDB keyed on
+  serial; the local file is a cache. A mis-selection is then fixable from a
+  browser, not by walking to the bay.
+- **Re-runnable.** Available from the Start menu, shows what was chosen and what
+  was installed. People pick wrong; that must not mean re-imaging.
+- **Audited.** ShopDB records who chose what and when - that is what separates
+  "misconfigured" from "chose wrong" six months later.
+- **Do not require the LAPS password.** Handing a shop-floor user the local admin
+  password to run a selection dialog is a real control change, and the app runs
+  elevated. Prefer a SYSTEM-run UI on the logon desktop, or a kiosk shell.
+
+### 4.3 Per-machine configuration records
+
+Today a machine's identity is scattered:
+
+| What | Where today | Size |
+|---|---|---|
+| eDNC / NTLARS registry | `_ntlars-backups/` - 147 per-bay `.reg` files | ~1.5 MB total |
+| WaxTrace bay config | `bay-config.csv` - 15 bays, 7 FTPak versions, per-bay user ID | small |
+| CMM bay config | `cmm-bay-config.csv` -> version.txt, doda.txt | small |
+| UDC settings | `pre-install/udc-backups/`, per-bay | ~240 MB per bay |
+| Machine number | `machine-number.txt` written by startnet | trivial |
+
+Every bay gets **all** of it staged, then picks its own.
+
+Proposed: one record per machine in ShopDB.
+
+```
+ShopDB asset (key: serial and/or machine number)
+  ├─ pctype + subtype           -> selects the GE-Enforce scope
+  ├─ tool association           -> CMM bay, Keyence model, FTPak version, DODA
+  ├─ machine number             -> UDC / eDNC naming
+  └─ payload refs (sha256)      -> NTLARS .reg, UDC backup, per-bay settings
+```
+
+**Reference payloads, do not embed them.** NTLARS `.reg` files carry binary
+values and UDC backups are hundreds of MB. GE-Enforce already has a
+content-addressed blob store with an HTTP fetch endpoint - the record names the
+payload, the store holds it.
+
+This also removes a live bug class. `Restore-UDCData.ps1` and
+`Update-MachineNumber.ps1` each mount SMB backup shares on their own drive
+letters, which collided with GE-Enforce's `W:` and killed the manifest entry
+running next (fixed in `66c24b5` by moving them to `R:` and `N:`). Payloads over
+HTTPS remove drive-letter juggling entirely.
+
+Migration is a one-time import of two CSVs and 147 `.reg` files. A script, not a
+project.
+
+---
+
+## 5. Zero-touch: ShopDB-triggered imaging
+
+### 5.1 Flow
+
+```
+1. Zeroed PC, boot order = IPv4 only. PXE boots into WinPE.
+2. WinPE reports serial + MAC + model, then WAITS.
+3. ShopDB shows it under "awaiting assignment".
+4. Operator opens the target machine -> "Create this PC" -> picks the waiting box.
+5. WinPE polls, receives a job:
+     { pctype, subtype, tool/bay, tenant, purpose, target asset id }
+   and images with NO menus.
+6. Progress streams to that machine's record in real time.
+7. On completion the PC binds to the asset record.
+```
+
+Every menu in `startnet.cmd` becomes a field in the job. If no job exists, it
+falls back to today's interactive menu and displays its own serial so one can be
+created.
+
+### 5.2 Safety - this is a remote-triggered disk wipe
+
+Clicking a web button destroys a machine, and the target is chosen from a list.
+The nightmare is picking the wrong row.
+
+**Mitigation:** the waiting PC displays a short code on screen; the job cannot be
+claimed unless that code matches what the operator confirms in ShopDB. Cheap, and
+it makes wrong-machine wipes structurally hard rather than merely unlikely.
+
+Additionally: a job may only target a machine currently in the waiting state, and
+the wipe must be logged against both the operator and the asset.
+
+### 5.3 Real-time record updates
+
+Each phase already produces data; it simply is not joined up.
+
+| Phase | Existing source | Lands on the record as |
+|---|---|---|
+| PXE boot | dnsmasq lease + WinPE check-in | serial, MAC, model, "imaging started" |
+| WIM apply | `winpe-status-push.ps1` | live stage / progress |
+| Staging | `winpe-staging.log` + harvested bundle | what payload actually landed |
+| First boot | collector API | CPU, RAM, disk, OS build |
+| Enrollment | `criticalChecks.json`, `TokenMatch.json` | Entra join state, tenant, purpose |
+| Steady state | GE-Enforce report | installed apps, drift, self-heal events |
+
+End state is one timeline per machine: *imaged 14:32 -> staged
+gea-shopfloor-cmm, bay CMM4 -> enrolled GCCH_SH -> PC-DMIS 2019 R2 installed ->
+enforcing clean since*.
+
+**Two rules so it does not rot:**
+
+1. **Push, best-effort.** If ShopDB is unreachable the bay must still image.
+   Queue events on the PXE server and drain them; the harvested logs are the
+   durable local copy.
+2. **One writer per field.** Imaging status from the PXE server, inventory from
+   the collector, app state from GE-Enforce. Two writers on one field is the
+   exact bug that ate 2026-08-06.
+
+---
+
+## 6. Network design
+
+### 6.1 Dual-homed PXE server
+
+- **PXE side** - isolated `172.16.9.0/24`, dnsmasq DHCP bound to that adapter
+- **GE side** - corporate, reachable from anywhere; carries ShopDB API traffic,
+  the job queue, status pushes, and (if wanted) the BPRT token fetch
+
+The onboard `enp0s31f6` is free for this today.
+
+### 6.2 Security prerequisites - these gate the whole thing
+
+Checked 2026-08-06:
+
+**Already safe.** dnsmasq has `listen-address=172.16.9.1` + `bind-dynamic`, so it
+binds only to the interface holding that address. DHCP will **not** leak onto a
+GE-side NIC. This was the failure I most expected and it is already handled.
+
+**Not safe yet:**
+
+```
+smb.conf   no `interfaces =` / `bind interfaces only`  -> Samba listens on ALL interfaces
+ufw        every rule is ALLOW IN Anywhere, not interface-scoped:
+             22/tcp    SSH        (account is pxe/pxe)
+             445/tcp   shares     (pxe-upload, password in scripts)
+             69/udp    TFTP
+             9009,9011 webapp
+```
+
+The moment a GE-side interface comes up, all of that is corporate-reachable.
+
+**Required before dual-homing:**
+1. Scope every UFW rule to the PXE interface (`ufw allow in on <pxe-if> ...`)
+2. `interfaces = <pxe-if>` + `bind interfaces only = yes` in `smb.conf`
+3. Expose deliberately on the GE side only what must be - realistically the
+   webapp, behind real authentication
+4. Reconsider SSH credentials if the host becomes corporate-reachable
+
+*(Correction to an earlier note: the shares are **not** guest-accessible -
+`guest ok = no` on every share, with `map to guest = bad user`. They require the
+`pxe-upload` account. That account's password is in scripts, so it is not a
+control once 445 is corporate-reachable.)*
+
+### 6.3 What dual-homing unlocks
+
+- Job queue sync and live status without the share as intermediary
+- BPRT token fetch (`mcl.dwcdn.geaerospace.com`) reachable at imaging time
+- Possibly the Entra join during imaging rather than after re-cabling - see §8.2
+
+---
+
+## 7. The PESetup question
+
+### 7.1 Autostart does not apply to our media
+
+`AutoStartCountDown = 31` exists in the decompiled settings, and
+`disableauto.json` - whose *presence* disables autostart - is absent from the
+media. On the surface that suggests a 31-second countdown, and the observed log
+is consistent with an operator simply clicking before it fired:
+
+```
+11:30:07.74  'Selection View' started   (LTSC warning displayed)
+11:30:18.63  Btn 'Next' pressed.
+```
+
+**However:** per the team's operational experience, **LTSC builds cannot
+autostart**. The SELECT OS step warns when the media holds an LTSC image
+("99% of the time only for ShopFloor. Are you sure you want 'LTSC'?") and that
+confirmation is mandatory regardless of the countdown. Our media is
+`Windows 11 LTSC 24H2` (`OperatingSystem.json`, build 26100, id 20), so every
+image we produce hits it.
+
+Consequence: **the countdown is not a route to zero-touch for us.** The 40-second
+hands-off test is still worth doing once to confirm the behaviour first-hand and
+record it - but plan on the answer being "it waits".
+
+That promotes §7.2 from a contingency to the actual decision.
+
+### 7.2 Re-implementation - now the likely path, and tractable
+
+Nothing in the mechanism is proprietary - only the data, which we already own and
+already parse.
+
+| PESetup step | Equivalent |
+|---|---|
+| `PrepareDisk` | `diskpart /s diskpartEFI.txt` |
+| `PrepareUnattend` | token substitution (`%serialnumber%`, `*arch*`) + `Packages.xml` merge |
+| `CopyTools` / `CopyPackages` / `CopyHWPackages` | robocopy |
+| `CopyDrivers` | select by model from `HardwareDriver.json`, unzip |
+| `ApplyImage` | `DISM /Apply-Image` per `OperatingSystem.json` |
+| `ApplyPackages` / `ApplyLanguagePacks` | `DISM /Add-Package` |
+| `ApplyUnattend` | `DISM /Apply-Unattend` |
+| `CreateBCD` / `CopyWinRE` | `bcdboot`, `reagentc` |
+
+A few hundred lines of PowerShell. We would also get to fix the traps documented
+in `docs/PESETUP-INTERNALS.md`: substring first-match-wins driver matching, a
+family filter that knows only Latitude/OptiPlex/Precision, and a driver miss
+being a **warning** rather than a failure.
+
+**The cost is ownership, not effort.** `Release.json` points at MCL auto-update
+URLs, so GE expects this media to self-update. Diverging means tracking their
+format changes indefinitely, plus a likely compliance conversation about the
+mandated imaging tool. Since the LTSC gate means autostart will not save us
+(§7.1), this is a decision to take deliberately rather than a fallback.
+
+### 7.3 What we would keep either way
+
+Image-time preflight stays valuable regardless: secure boot (PESetup hard-fails
+without it), >=120 GB disk (`MinRequiredSpaceWithoutCompression`), driver match
+for the model, media age (30-day expiry). Already built as
+`playbook/scripts/preflight.ps1`.
+
+---
+
+## 8. Enrollment
+
+### 8.1 How it works today
+
+- Six MCL packages on the media: `PERS` / `SH` / `LOAN` x `GCCH` / `RoW`, plus
+  the SFLD package for shopfloor
+- `Start-BulkEnrollOrchestrator.ps1` asks tenant + purpose via
+  `Select-PCConfig.ps1` (a GUI), then applies the matching package
+- `Insert-BPRTToPPKG.ps1` fetches an **encrypted token table** from
+  `mcl.dwcdn.geaerospace.com`, decrypts with a static passphrase
+  (PBKDF2 310k / SHA-256 / AES-CBC), matches on **Tenant AND Purpose**, injects
+  the token and stamps the real expiry into the filename
+  (`Exp_XXXXXXXX` -> `Exp_yyyyMMdd`)
+- The package itself sets `<DNSComputerName>F%SERIAL%</DNSComputerName>` and
+  performs the Entra join
+- A human then assigns the device category in Intune
+
+As of 2026-08-06 the tenant/purpose choice can be pre-seeded at the PXE menu
+(`C:\Enrollment\pc-config.txt`, consumed by a shim at the path the orchestrator
+already calls). Injection deliberately stays at first logon - it needs internet.
+
+### 8.2 The constraint that shapes pre-imaged stock
+
+The BPRT token is stamped into the package with an expiry. A PC imaged, powered
+off, and left in a cupboard for three months has a **dead token** and will never
+join - and the failure looks identical to "not on the production network yet",
+because `Entra ID Joined: false` right after imaging is normal.
+
+Three options, pick deliberately:
+
+1. **Join at imaging time** - requires the production network at the bench
+   (which dual-homing could provide), and pre-imaged stock is then already joined
+2. **Join at first power-on** - cleaner logistically, but stock has a shelf life
+   bounded by token expiry
+3. **Re-inject on demand** - first boot detects a dead token and fetches a fresh
+   one; needs the machine to reach the token blob
+
+Whichever is chosen, the *silent* failure must be closed: a check that
+distinguishes "token expired" from "no network yet".
+
+---
+
+## 9. Ownership model
+
+Four times on 2026-08-06 two systems owned one thing and the last writer won
+silently. A clean slate is the moment to fix that. See `docs/OWNERSHIP.md`.
+
+| Concern | Owner | Not |
+|---|---|---|
+| Computer name | the provisioning package (`F%SERIAL%`) | any script in this repo |
+| Drive letters during imaging | PESetup (`W:`, hardcoded 9 places) | anything running `diskpart` concurrently |
+| Entra enrollment | the package + orchestrator | `run-enrollment.ps1` |
+| Kiosk / display targets | GE-Enforce scope | `site-config.json` (backstop only) |
+| Imaging status | PXE server | the collector |
+| Inventory | collector API | the PXE server |
+| Installed app state | GE-Enforce reports | anything else |
+| Job queue | **ShopDB** (owns assets) | the PXE webapp (executor only) |
+
+---
+
+## 9a. Design rules learned the hard way (2026-08-06)
+
+A day of fixing the current pipeline produced five rules. They are cheap to
+honour in a new design and expensive to retrofit.
+
+### Absent and empty are different
+
+Four separate scripts tested config as
+`$null -ne $cfg -and $cfg.Count -gt 0`, so an explicitly empty list fell through
+to a hardcoded default. A Display kiosk configured with
+
+```json
+"desktopApps": [],  "startupItems": [],  "taskbarPins": []
+```
+
+was given UDC, eDNC, NTLARS, WJ Shopfloor, Defect Tracker and Plant Apps -
+**configuring "none" produced "everything"**. Plant Apps launched
+`msedge --new-window` on a screen with no keyboard.
+
+Measured, not assumed: an empty JSON array round-trips as `Object[]` with
+`Count = 0`, and an absent key as `$null`. They are distinguishable; the code
+simply conflated them.
+
+*Rule: in the API model, "no items" and "not configured" must be different
+values on the wire, and the default for an unrecognised or missing scope is
+NOTHING, not a fallback set.*
+
+### Deny by default, always
+
+`preinstall.json` had 16 of 21 entries at `PCTypes: ["*"]`, so a kiosk installed
+Adobe, OpenText, Defect Tracker, the serial drivers and twelve legacy VC++
+redistributables. The SMB manifest had 18 of 25 entries unfiltered. In both
+cases the filter worked perfectly - it simply was not applied.
+
+*Rule: every payload declares which PC types it is for. An undeclared payload
+installs nowhere and fails validation, rather than installing everywhere.*
+
+### Gate at the point of action, not the call site
+
+`Run-ShopfloorSetup.ps1` gated both the S: mapper and the machine-number prompt
+on PC type. Both registered anyway on a Display, with no "Skipping" line in the
+log - something in the finalization phase reaches those registrars past the
+call-site gate. The fix was to gate inside each registrar.
+
+*Rule: authority checks belong with the thing being done. A caller-side check is
+a convenience, never the control.*
+
+### The image itself carries configuration
+
+`WJ Shopfloor.lnk`, dated April, sits in the all-users Startup folder of every
+bay - **inside the WIM**. No script change removes it, and no amount of thinning
+the pipeline touches it.
+
+*Rule: "thin image" must include auditing what is baked into the WIM, not just
+what the pipeline adds afterwards.*
+
+### The provisioning package is a hard boundary
+
+These are installed by the ppkg, not by anything PXE controls:
+
+```
+Google Chrome (+2 updater tasks)   RealVNC        Tanium
+CyberArk EPM   .NET 3.5   Report IP   Sysinternals Autologon   DSC
+PowerShell 7 x64 AND x86
+```
+
+*Rule: thinning the image does not thin the package. Anything that must not be
+on a kiosk and comes from the ppkg needs a package change or an explicit
+post-install removal - it cannot be solved by scoping our own payloads.*
+
+---
+
+## 10. Phased delivery
+
+Each phase is useful standing alone. No phase requires the next.
+
+**Phase 0 - settle the unknowns (hours)**
+- Confirm the LTSC autostart gate first-hand (one bay, hands off, 40 seconds)
+  and record it - expected to wait, per operational experience
+- Decide: re-implement the imaging step, or accept one click per build
+- Decide: one image or three
+- Decide: join at imaging time, at first power-on, or re-inject
+
+**Phase 1 - visibility (small)**
+- WinPE reports serial / MAC / model on boot; "awaiting assignment" list in the webapp
+- Relay imaging status to ShopDB over the GE side
+- *Useful immediately: you can see what is booting and what it did.*
+
+**Phase 2 - dual-home safely (small, gating)**
+- Interface-scope UFW, bind Samba, bring up `enp0s31f6`
+- Nothing else proceeds safely until this is done
+
+**Phase 3 - job queue**
+- Job model + API in ShopDB (create / claim / complete), with the on-screen
+  confirmation code
+- WinPE polls once where the menu is today; falls back to the menu if no job
+
+**Phase 4 - first-boot selection**
+- Selection UI, server-backed lists, POST the choice, re-runnable
+- Retire the WinPE sub-menus for subtype and tool association
+
+**Phase 5 - per-machine records**
+- Import the CSVs and `.reg` files into ShopDB with payload refs
+- Retire `bay-config.csv`, `cmm-bay-config.csv`, and staging all 147 `.reg` files
+  to every bay
+
+**Phase 6 - thin the image**
+- Remove per-type media (`_media/<pctype>`), the staging block, the Office ppkg
+  variants, the CMM bay picker, the WaxTrace ISO cherry-pick
+- WinPE's job becomes: partition, apply, join, install enforce client, reboot
+
+---
+
+## 11. Risks
+
+| Risk | Why it matters | Mitigation |
+|---|---|---|
+| Remote-triggered wipe hits the wrong machine | destructive, irreversible | on-screen confirmation code; job may only target a waiting machine; log against operator and asset |
+| ShopDB becomes a single point of failure | today a bay configures from the share with ShopDB down | GE-Enforce ETag / last-known-good cache; explicit failure UI, never a silent stall |
+| Dual-homing exposes the PXE server | SSH `pxe/pxe`, SMB, TFTP currently `ALLOW IN Anywhere` | Phase 2 gates everything |
+| BPRT expiry on shelf stock | silent, indistinguishable from "no network yet" | pick a join strategy (§8.2) and add an explicit expiry check |
+| Selection UI becomes the new single point of correctness | wrong subtype = wrong PC-DMIS, wrong bay config | re-runnable, server-corrected, audited |
+| Re-implementing PESetup | ongoing MCL format tracking + a likely compliance conversation | scope it against "one click per build" - zero-touch is the only thing that needs it |
+| Big payloads over the corporate network | PC-DMIS, FormTracePak ISOs (~2 GB each), Keyence | GE-Enforce supports `smb` / `http` / `inline` per entry - decide per payload |
+| Three images drift apart | drift caused the 2026-08-06 outage | prefer one image; `share-drift.py` guards what remains |
+| API unreachable at first boot | ShopDB needs AESFMA; the imaging LAN cannot reach it | wait-for-network task pattern (§4.2); never assume connectivity |
+| ppkg-delivered apps on a kiosk | Chrome, RealVNC, Tanium etc. are outside PXE control | package change or explicit post-install removal - scoping our payloads cannot fix it |
+
+---
+
+## 12. Open questions
+
+1. One image or three? What genuinely differs between them?
+2. Join at imaging time, at first power-on, or re-inject on demand?
+3. Is the LTSC confirmation truly unskippable? (expected yes - it decides
+   whether zero-touch requires re-implementing the imaging step)
+4. Is replacing the GE-mandated imaging tool acceptable, if it comes to that?
+5. Does the selection UI run as SYSTEM (no LAPS password), or as an admin user?
+6. Which payloads stay on SMB and which move to HTTPS?
+7. Who operates the job queue day to day - is "Create this PC" a technician
+   action, or does it need approval?
+
+---
+
+## 13. Where everything referenced here lives
+
+### 13.1 This repo (`/home/camp/projects/pxe`)
+
+| Path | What |
+|---|---|
+| `docs/PESETUP-INTERNALS.md` | decompiled imaging tool behaviour; the source for every PESetup claim above |
+| `docs/OWNERSHIP.md` | who owns what, with the 2026-08-06 collisions |
+| `playbook/startnet.cmd` | the WinPE script this proposal thins out - menus, staging, verify, log harvest |
+| `playbook/scripts/preflight.ps1` | bay-side checks (secure boot, disk, driver match, media age) |
+| `playbook/shopfloor-setup/run-enrollment.ps1` | applies the SFLD package via `provtool` |
+| `playbook/shopfloor-setup/Run-ShopfloorSetup.ps1` | post-boot setup; the enrollment-model comment is here |
+| `playbook/shopfloor-setup/Fetch-StagingPayload.ps1`, `Verify-And-Heal-Staging.ps1` | first-logon self-heal; read `C:\Enrollment\fetch-source.txt` |
+| `playbook/shopfloor-setup/BPRT/Select-PCConfig.ps1` | the pre-seed shim (vendor GUI preserved as `-vendor.ps1` on the share) |
+| `playbook/shopfloor-setup/BIOS/{check-bios.cmd,models.txt}` | firmware matching |
+| `scripts/preflight.py` | runs every server-side lint in one command |
+| `scripts/lint-unattend.py` | schema limits: Path 259, CommandLine 1024, Description 256 |
+| `scripts/lint-driver-catalogue.py` | reimplements `GetDriverByModel` |
+| `scripts/share-drift.py` | repo vs live share, git-owned vs unreconciled |
+| `playbook/shopfloor-setup/Collect-ImagingDiagnostics.ps1` | one-pass bay diagnostics - identity, enrollment, installed apps, all four autostart surfaces, GE-Enforce reachability |
+| `scripts/build-pctype-media.py` | per-PCTYPE media views (retired by Phase 6) |
+
+### 13.2 PXE server (`pxe@172.16.9.1`)
+
+| Path | What |
+|---|---|
+| `/srv/samba/winpeapps/<image>/Deploy/Control/` | `HardwareDriver.json`, `OperatingSystem.json`, `Media.tag`, `Release.json` |
+| `/srv/samba/winpeapps/<image>/Deploy/FlatUnattendW10.xml` | the answer file that actually boots machines |
+| `/srv/samba/winpeapps/_shared/Applications/BPRT/` | the six MCL packages, `Insert-BPRTToPPKG.ps1`, `Start-BulkEnrollOrchestrator.ps1`, `Select-PCConfig*.ps1` |
+| `/srv/samba/winpeapps/_shared/BIOS/` | firmware EXEs + `models.txt` (served as the `winpeapps_bios` share) |
+| `/srv/samba/winpeapps/_media/<pctype>/` | per-PCTYPE media views |
+| `/srv/samba/enrollment/scripts/` | `run-enrollment.ps1`, `preflight.ps1`, `winpe-status-push.ps1` |
+| `/srv/samba/enrollment/shopfloor-setup/` | per-PC-type trees, `menu.json`, `_ntlars-backups/` (147 `.reg`) |
+| `/srv/samba/enrollment/shopfloor-setup/gea-shopfloor-waxtrace/bay-config.csv` | 15 bays, FTPak versions |
+| `/srv/samba/enrollment/installers-post/cmm/cmm-bay-config.csv` | CMM bay -> version, DODA |
+| `/srv/samba/enrollment/pre-install/udc-backups/` | per-bay UDC settings |
+| `/srv/samba/enrollment/ppkgs/` | the SFLD package (8.2 GB) |
+| `/srv/samba/enrollment/imaging-logs/<serial>/` | harvested imaging logs (added 2026-08-06) |
+| `/var/www/html/win11/sources/boot.wim` | the booted WinPE image |
+| `/var/log/pxe-imaging/<serial>.json` | per-bay stage history |
+| `/opt/pxe-webapp/` | Flask webapp (unit `pxe-webapp`, :9009) |
+| `/etc/dnsmasq.conf`, `/etc/samba/smb.conf` | the binding config §6.2 depends on |
+
+### 13.3 shopdb-flask (`/home/camp/projects/shopdb-flask`)
+
+| Path | What |
+|---|---|
+| `plugins/geenforce/seed_display_scope.py` | the pattern this proposal generalises - subtype map, server role by IP, sweep |
+| `plugins/geenforce/client/` | `ShopdbEnforceClient.psm1`, `Invoke-ShopdbEnforce.ps1` |
+| `shopdb/core/api/` | collector endpoint, dashboard-defaults display-role |
+
+### 13.4 Evidence behind the claims in this document
+
+| Path | What it shows |
+|---|---|
+| `/home/camp/pxe-images/now/pesetuplog.txt` | PESetup 4.0.0.20 run - media drive, disking, copy, driver selection, the `Btn 'Next'` timing in §7.1 |
+| `/home/camp/pxe-images/now/debug.txt` | the WinPE console for the failed volume-finder run |
+| `/home/camp/pxe-images/pxe2/Panther/` | `setupact.log` / `setuperr.log` naming the unattend `Path` failure |
+| `/home/camp/pxe-images/debug2/` | the autologon registry state and the sysprep-loop timeline |
+| `/home/camp/pxe-images/debug3/Logs/BPRT/` | the 13 package components, `criticalChecks.json`, `packageInfo.json` |
+| `/home/camp/pxe-images/debug3/Logs/PPKG/` | the package itself, `provisioning-sessions.json`, the diagnostics evtx |
+| `/home/camp/pxe-images/debug3/Logs/enrollment.log` | the double run and the rename race in §9 |
+| `/home/camp/pxe-images/debug3/Logs/FilteredReportIP.log` | proves the bay had no route to Entra (§8.2) |
+
+### 13.5 On-bay locations (for anyone diagnosing one)
+
+```
+C:\Enrollment\                  staged payload, pc-type.txt, display-type.txt,
+                                pc-config.txt, fetch-source.txt, winpe-staging.log
+C:\Deploy\Applications\BPRT\    the packages + orchestrator, copied by PESetup
+C:\Logs\BPRT\<Component>\       per-component package logs (UTF-16)
+C:\Logs\BPRT\criticalChecks.json    PPKG matched / Entra joined / OOBE execution
+C:\Logs\PPKG\                   provisioning diagnostics + session state
+C:\Logs\SFLD\                   DSC deployment, sync_intune, shopfloor-setup
+C:\Logs\enrollment.log          run-enrollment.ps1
+C:\Windows\Panther\             setupact.log, setuperr.log, unattend.xml, PESetup*.log
+C:\Windows\Panther\UnattendGC\  oobeSystem pass
+```
+
+### 13.5a Gotchas any new tooling will hit
+
+- **`HardwareDriver.json` cannot be read by `ConvertFrom-Json`.** It carries both
+  casings of the same fields (`fileName`/`FileName`, `destinationDir`/
+  `DestinationDir`) and PowerShell rejects the document - on 5.1 *and* 7.
+  `-AsHashtable` is PS6+ and WinPE runs 5.1. Extract fields by regex, or parse in
+  Python where duplicate keys are tolerated.
+- **`Compress-Archive` caps at 2 GB**, and `run-enrollment` harvests the 8 GB
+  provisioning package into `C:\Logs\PPKG`, so any log collection must exclude
+  `*.ppkg`.
+- **Backslash-vs-forward-slash**: PowerShell Core normalises `\` to `/` on Linux,
+  so `Join-Path` with Windows separators works cross-platform - handy for testing
+  bay scripts on the dev box.
+
+### 13.6 How to re-derive things
+
+```bash
+# read a file off the share
+sshpass -p pxe ssh -o StrictHostKeyChecking=no pxe@172.16.9.1 'cat <path>'
+smbclient //172.16.9.1/enrollment -U pxe-upload%pxe -c 'ls'
+
+# what is actually inside the booted WinPE
+sudo wimextract /var/www/html/win11/sources/boot.wim 1 \
+     /Windows/System32/startnet.cmd --dest-dir=/tmp/x
+sudo wimdir /var/www/html/win11/sources/boot.wim 1 | grep -i <name>
+
+# a .ppkg is a WIM - pull out the spec without extracting 8 GB
+7z l  <pkg>.ppkg
+7z e  <pkg>.ppkg -o<dir> "Multivariant/0/customizations.xml" \
+      "Multivariant/0/Prov/RunTime/0__Accounts_Azure.provxml"
+
+# provisioning diagnostics (python-evtx is installed)
+python3 -c "from Evtx.Evtx import Evtx;
+[print(r.xml()) for r in Evtx('Provisioning-Diagnostics-Admin.evtx').records()]"
+
+# decompile PESetup - the bundle-extraction recipe is in PESETUP-INTERNALS.md
+ilspycmd -t <TypeName> PESetup.dll
+
+# validate before deploying
+./scripts/preflight.py            # every server-side lint
+./scripts/share-drift.py --diff   # repo vs live
+```
+
+### 13.7 The 2026-08-06 commits this document draws on
+
+```
+dfa026b  lint-driver-catalogue         c7b1769  build-pctype-media
+049dd7b  startnet per-PCTYPE media     d5f7abc  BIOS 7020 family
+385acfe  lint-unattend                 2b6189f  startnet W: wait + honest reporting
+d04865d  PESetup version + LogonCount  b96ff7e  retire shopfloor-dashboard route
+36be60e  run-enrollment stops renaming 8c21282  staging verify + log harvest
+d2200e8  preflight (bay + server)      68df59e  OWNERSHIP.md + share-drift
+9d51c0b  purpose menu + 3D kiosk       a0aceb4  PXESERVER consolidation
+bb08392  download-drivers case fix
+```

docs/cyberark-cmm-doda-policy.md

@@ -0,0 +1,144 @@
+# CyberArk EPM - CMM / DODA elevation policy
+
+Reference for the CyberArk EPM admin. Fixes the "PC-DMIS is elevated but the
+tools it calls error that they are not running elevated" problem on CMM bays.
+
+## Problem (root cause)
+
+CyberArk EPM elevation is per-process and is NOT inherited by child processes.
+The existing policy elevates PC-DMIS (`PCDLRN.exe`), but the external `.exe`
+files the PC-DMIS routine spawns (report, geometry, and DODA tools) launch with
+the standard user token (Medium integrity) and fail their own "must run
+elevated" check, even though the parent PC-DMIS is elevated. The elevation dies
+at the process boundary.
+
+## Flow that breaks
+
+The PC-DMIS routine drives in-process `.BAS` scripts that shell out to separate
+executables:
+
+| Step | Process | Separate process? |
+|------|---------|-------------------|
+| Merge / sort report results | `MergeFiles.exe` (.NET), reads `C:\Apps\DODA\PreProcess\` | yes |
+| Geometry export | `PCDToIGES.exe`, `RotateProbeVector.exe` | yes |
+| DODA calculation | `DovetailAnalysis.exe` (+ embedded JVM and python) | yes |
+| RTF -> PDF, display | `winword.exe`, `AcroRd32.exe` | yes (removed by the BAS rework below) |
+| Folder create / save | `MAKEDIR.BAS`, `MAKEFOLDER.bas`, `SaveAsFolder.bas` | no (in-process, uses PC-DMIS token) |
+
+The in-process file operations inherit PC-DMIS's elevated token. The separate
+`.exe` files do not. Those are what get blocked.
+
+## Fix: one Application Group + one Elevate policy
+
+Do NOT use "elevate all child processes of PC-DMIS". That would elevate
+`cmd.exe` and anything PC-DMIS launches, which is a large hole on a locked-down
+shopfloor PC. Elevate only the named toolchain.
+
+### Application Group: CMM-DODA-Tools
+
+These are in-house, unsigned tools, so match by SHA-256 (or by path + filename
+if the install directory is admin-write-only and the confirmed path is known).
+
+| App | SHA-256 | Spawns children? |
+|-----|---------|------------------|
+| `MergeFiles.exe` | `e58ce7599d3bdba816c7ecb183d4f52b32ad8be0b8e4f41813824d8eb472d723` | no |
+| `PCDToIGES.exe` | `7bdc961c406f7a0f6f8a10752988a17504bdfd691469c08d20f0d5b6673974cf` | no |
+| `RotateProbeVector.exe` | `f8a1b5b0025769fe0d28dc12826ef5d1fbcdba3b29383799c1eb04b955abebdc` | no |
+| `DovetailAnalysis.exe` | `86dcb0898bdef4687427ce339520a9c9f5a582890c2241d784fa985019eaaec1` | yes (JVM + python) |
+
+### Elevate policy
+
+- Target: the `CMM-DODA-Tools` Application Group
+- Action: Elevate (run with administrator rights)
+- Applies to: the CMM computer set + the `ShopFloor` user
+- Child processes: elevate ONLY for `DovetailAnalysis.exe` (it launches the
+  embedded JVM and python scripts that do the actual file work). The other
+  three have no children.
+- Match basis: SHA-256 hash
+
+## Explicitly NOT in the policy
+
+`winword.exe`, `AcroRd32.exe`, `cmd.exe`. The `CREATE_PDF_FROM_RTF.BAS` rework
+(Word writes the PDF to user `%TEMP%`, PC-DMIS moves it to the final path with
+its own elevated in-process token, display via the default PDF handler) removes
+their need for elevation. Keep Office and Reader out of the elevation set.
+
+## What the EPM admin needs from GE
+
+- The computer group = the CMM bays (hostname list, OU, or AD group)
+- The user = `ShopFloor` (local account)
+- If using path matching instead of hash: the confirmed install directory of the
+  four exes on a bay (`where MergeFiles.exe`)
+
+## Verify
+
+- Before: from elevated PC-DMIS, spawn a child `cmd.exe`, then run
+  `whoami /groups | findstr Label`. Medium Mandatory Level confirms children are
+  not elevated (the bug).
+- After: the four tools run at High Mandatory Level; report generation plus
+  copy/move/delete to C: and S: succeed; no "not elevated" error.
+
+## Caveats
+
+- Hash churn: rebuilding a tool changes its hash, so the Application Group hash
+  must be re-stamped. Path + filename matching avoids this IF the install
+  directory is admin-write-only (so a same-named spoof cannot be dropped there).
+- Not an ACL fix: the tools hard-check elevation and bail before touching the
+  filesystem, so pre-granting NTFS ACLs alone will not unblock them. The EPM
+  elevation is the actual lever.
+- Scope tight: match by hash and scope to the CMM computer group + ShopFloor so
+  this elevation never applies fleet-wide.
+
+## Related code fixes (PXE imaging side)
+
+- `09-Setup-CMM.ps1` Step 2.5 ACL list corrected from `C:\Program Files\DODA`
+  (nonexistent) to `C:\Apps\DODA` (where `Install-DODA.ps1` actually extracts).
+- `MergeFiles.exe` expects `C:\Apps\DODA\PreProcess\`, which the DODA zip does
+  not create (it extracts flat). A missing `PreProcess` directory is the likely
+  cause of the historical `MergeFiles.GetDoDAFolder` `DirectoryNotFoundException`
+  crash (see `cmm-utilities` repo `dotNET event.txt`). Have `Install-DODA.ps1`
+  create the `PreProcess` subdir, or have whoever deploys the toolchain own it.
+- The CMM tool chain (`MergeFiles.exe`, `PCDToIGES.exe`, `RotateProbeVector.exe`,
+  the `.BAS` scripts) lives in the separate `cmm-utilities` repo and is NOT
+  deployed by PXE imaging today. Decide whether imaging should own it so the
+  install path, ACLs, and `PreProcess` directory are consistent.
+
+## CREATE_PDF_FROM_RTF.BAS rework (removes Word/Reader from the elevation set)
+
+```vb
+' CREATE_PDF_FROM_RTF.BAS - rev 1.0: convert in user temp, then move with
+' PC-DMIS's own token; display via default handler (no elevation needed).
+Sub Main(filename As String, displayReport As String)
+    Dim rtfFile As String, finalPdf As String, tempPdf As String
+    rtfFile  = filename & ".RTF"
+    finalPdf = filename & ".PDF"
+    Dim base As String
+    base = Mid(filename, InStrRev(filename, "\") + 1)
+    tempPdf = Environ$("TEMP") & "\" & base & ".PDF"
+
+    ' Word (un-elevated COM) can write to %TEMP% - a user-writable path.
+    Dim word As Object
+    Set word = CreateObject("word.application")
+    word.Visible = False
+    word.Documents.Open rtfFile
+    word.ActiveDocument.SaveAs2 tempPdf, 17   ' 17 = wdFormatPDF
+    word.Quit
+    Set word = Nothing
+
+    ' Move temp -> final using PC-DMIS's in-process token (elevated via
+    ' CyberArk), so the protected/S: destination is written without needing
+    ' Word itself elevated. FileCopy works across volumes; Name does not.
+    If Dir(finalPdf) <> "" Then Kill finalPdf
+    FileCopy tempPdf, finalPdf
+    Kill tempPdf
+
+    ' Display via the default PDF handler in the user's own context.
+    If UCase(displayReport) = "TRUE" Then
+        Dim sh As Object
+        Set sh = CreateObject("Shell.Application")
+        sh.ShellExecute finalPdf, "", "", "open", 1
+    End If
+
+    Kill rtfFile
+End Sub
+```

docs/ge-enforce-v2-architecture.md

@@ -196,7 +196,7 @@ Two separate copies of overlapping content with different roles:
 
 | Path | Source | Used by | Updated when |
 |------|--------|---------|--------------|
-| `C:\Enrollment\shopfloor-setup\` | PXE imaging copy from `\\10.9.100.1\enrollment\shopfloor-setup\` | Imaging-flow scripts: `Run-ShopfloorSetup.ps1`, `Stage-Dispatcher.ps1`, `Set-MachineNumber.ps1` -> `Update-MachineNumber.ps1` | Re-image only |
+| `C:\Enrollment\shopfloor-setup\` | PXE imaging copy from `\\172.16.9.1\enrollment\shopfloor-setup\` | Imaging-flow scripts: `Run-ShopfloorSetup.ps1`, `Stage-Dispatcher.ps1`, `Set-MachineNumber.ps1` -> `Update-MachineNumber.ps1` | Re-image only |
 | SFLD share `\<scope>\` | Direct upload | GE-Enforce.ps1 / Install-FromManifest.ps1 (every logon) | Direct file upload to share |
 
 Implication for hot-fixing scripts: a fix to `Restore-UDCData.ps1` needs to

docs/geastandardpbr-overrides.md

@@ -52,11 +52,11 @@ Add a new entry (insert before the existing `D12 OptiPlex Family / 7090` entry):
 the actual driver pack from Dell's catalog by model name (`extract_model_ids`
 matches "7080") and downloads the latest pack at run time.
 
-### Side artifacts already on the live PXE server (10.9.100.1)
+### Side artifacts already on the live PXE server (172.16.9.1)
 
-- `\\10.9.100.1\winpeapps\_shared\BIOS\OptiPlex_7080_1.37.0.exe` (39.8 MB, BIOS update)
-- `\\10.9.100.1\image-upload\Deploy\Out-of-box Drivers\Dell_11\OptiPlex\D11 OptiPlex Family\win11_70809ntr8_a09.zip` (Win11 driver pack, 2.6 GB)
-- `\\10.9.100.1\winpeapps\_shared\BIOS\models.txt` includes the 7080 line.
+- `\\172.16.9.1\winpeapps\_shared\BIOS\OptiPlex_7080_1.37.0.exe` (39.8 MB, BIOS update)
+- `\\172.16.9.1\image-upload\Deploy\Out-of-box Drivers\Dell_11\OptiPlex\D11 OptiPlex Family\win11_70809ntr8_a09.zip` (Win11 driver pack, 2.6 GB)
+- `\\172.16.9.1\winpeapps\_shared\BIOS\models.txt` includes the 7080 line.
 
 These persist regardless of `geastandardpbr/` rebuilds. Only the model-registry
 edits need to be re-applied after a USB re-import.

docs/mtconnect-followup-runbook.md

@@ -0,0 +1,296 @@
+# MTConnect follow-up runbook
+
+Written 2026-08-11. Everything here needs a machine this box cannot reach - the
+SFLD share, the middle-man PC, or a shopfloor bay - so it is yours to run.
+
+Work in the order given. Part 1 changes what future installs get; parts 2 and 3
+fix bays that are already wrong; parts 4 and 5 are questions to answer before
+any more code is written.
+
+### Identify every bay by machine number
+
+The machine number is the only identifier that stays put. A PC gets replaced or
+re-imaged and its name changes; the machine it sits at does not. Both machine-to-PC
+sources used to build this document are point-in-time snapshots and will already
+have drifted.
+
+Every PC name below came from `mtconnect-hostname-machine-map.csv` (12 June),
+the `Shop Floor PC Name` column of `West Jefferson_Machines.csv`, or the variant
+captures. Treat them as "this is where the fault was last seen" - useful for
+finding the bay, never for deciding what to write into it.
+
+**The bay knows its own number.** In order of authority:
+
+```powershell
+# 1. eDNC registry - what GE-Enforce trusts post-imaging
+(Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\GE Aircraft Engines\DNC\General' -Name MachineNo).MachineNo
+# 2. the enrollment file imaging writes
+Get-Content C:\Enrollment\machine-number.txt
+# 3. UDC
+(Get-Content C:\ProgramData\UDC\udc_settings.json -Raw | ConvertFrom-Json).GeneralSettings.MachineNumber
+```
+
+Or dot-source the lib and ask for both at once:
+
+```powershell
+. C:\GE Aerospace\lib\Update-MachineNumber.ps1
+Get-CurrentMachineNumber      # @{ Udc = ...; Ednc = ... }
+```
+
+**ShopDB is the live PC-to-machine record**, maintained by the collector rather
+than by hand, so it beats any CSV:
+
+```
+https://tsgwp00525.wjs.geaerospace.net/shopdb/api/computers/by-hostname/<HOSTNAME>
+```
+
+If those disagree with each other, or with the machine plate, stop and resolve
+that first - a rename applied to the wrong number is worse than the mismatch
+you started with.
+
+---
+
+## Part 1. Push the Fanuc adapter 3.25.3 to the SFLD share
+
+The staged bundle here is already on 3.25.3.0 (`sha256` starts `6e46dcd51affa9e0`).
+The live share is not. Until this is copied, new installs still get 3.23.0.0.
+
+**1.1** From the middle-man PC, with `Z:` on the dev share:
+
+```
+Z:\mtconnect-bundles\fanuc\Adapter\
+```
+
+should contain `FanucCppAdapterWinX64.exe` at **3,369,984 bytes**. Confirm before copying:
+
+```powershell
+(Get-Item Z:\mtconnect-bundles\fanuc\Adapter\FanucCppAdapterWinX64.exe).Length
+(Get-FileHash Z:\mtconnect-bundles\fanuc\Adapter\FanucCppAdapterWinX64.exe -Algorithm SHA256).Hash.Substring(0,16)
+# expect 3369984 and 6E46DCD51AFFA9E0
+```
+
+**1.2** Back up what is on the share now, then copy the three files:
+
+```powershell
+$share = '\\tsgwp00525.wjs.geaerospace.net\shared\dt\shopfloor\main\machineapps\mtconnect-bundles\fanuc\Adapter'
+Copy-Item $share\FanucCppAdapterWinX64.exe "$share\..\FanucCppAdapterWinX64-3.23.0-replaced-$(Get-Date -f yyyyMMdd).exe"
+Copy-Item Z:\mtconnect-bundles\fanuc\Adapter\FanucCppAdapterWinX64.exe $share -Force
+Copy-Item Z:\mtconnect-bundles\fanuc\Adapter\Fwlib64.dll  $share -Force
+Copy-Item Z:\mtconnect-bundles\fanuc\Adapter\fwlibe64.dll $share -Force
+```
+
+**1.3** Verify on the share:
+
+```powershell
+(Get-FileHash $share\FanucCppAdapterWinX64.exe -Algorithm SHA256).Hash.Substring(0,16)   # 6E46DCD51AFFA9E0
+```
+
+`adapter.xml` is deliberately NOT copied. The config vocabulary is identical
+between 3.23 and 3.25.3, and the share's copy carries site settings.
+
+**Rollback:** copy the `-3.23.0-replaced-` file back over `FanucCppAdapterWinX64.exe`.
+
+---
+
+## Part 2. Fix the two Makino bays
+
+Both have the agent on the machine number and the other three files still on
+`MAKINO-1`. The fixed `Update-MachineNumber.ps1` converges them.
+
+| machine | PC when captured | confirm at the bay |
+|---|---|---|
+| **7502** | `G5W5V7V3ESF` | eDNC reg / enrollment file / plate |
+| **7506** | `G4H8KF33ESF` | eDNC reg / enrollment file / plate |
+
+Find the current PC for a machine number in ShopDB rather than trusting the
+name above; if the PC was replaced, the new one may never have had the bad
+rename applied, in which case check its four files before doing anything.
+
+**2.1** On the bay, elevated PowerShell:
+
+```powershell
+. C:\GE Aerospace\lib\Update-MachineNumber.ps1     # or wherever the lib landed
+$r = Update-MTConnectVariantName -NewNumber '7502' `
+      -Root 'C:\Makino-MTConnect' `
+      -Targets @(
+        @{ Path='Agent\Devices.xml';        Kind='attr' },
+        @{ Path='Agent\Devices.EDM.xml';    Kind='attr' },
+        @{ Path='Data\AdapterDataFile.xml'; Kind='name' },
+        @{ Path='Agent\Agent.cfg';          Kind='cfg'  }
+      ) `
+      -Services @('Makino Adapter Manager','Makino MTConnect Agent')
+$r.Updated; $r.Errors
+```
+
+Use the bay's own number - do not paste 7502 onto 7506.
+
+**2.2** Verify all four agree, and nothing still says MAKINO:
+
+```powershell
+Select-String -Path C:\Makino-MTConnect\Agent\Devices.xml,`
+                    C:\Makino-MTConnect\Agent\Devices.EDM.xml,`
+                    C:\Makino-MTConnect\Data\AdapterDataFile.xml,`
+                    C:\Makino-MTConnect\Agent\Agent.cfg `
+             -Pattern 'MAKINO-\d+|7502'
+```
+
+**2.3** Confirm it is serving:
+
+```powershell
+(Invoke-WebRequest http://localhost:5000/current -UseBasicParsing).Content -match '<MTConnectDevices'
+```
+
+**Watch for:** the vendor guide says the Adapter Manager rewrites its whole
+configuration from memory when it stops. The function stops it first, but this
+has never been proven on real hardware. If the names revert after a reboot,
+stop here and tell me - that changes the approach.
+
+---
+
+## Part 3. Fix the seven Fanuc bays
+
+The agent and the adapter disagree. Three have a correct agent and a stale
+adapter; four have no agent device name at all and need looking at before any
+rename (Part 4).
+
+**Rename these three.** The "correct number" column is what the June map said -
+it is a starting point, not authority. Confirm from the bay itself (see the
+note at the top) before running anything:
+
+| machine (per map) | adapter says | agent says | PC when captured |
+|---|---|---|---|
+| **7801** | 4007 | 7801 | `G9N2JNZ3ESF` |
+| **7804** | 3031 | 7804 | `GG1J98Y3ESF` |
+| **2005 or 2006** | 2005 | 2006 | `GC7ZN7V3ESF` |
+
+`GC7ZN7V3ESF` is the one to be careful with: 2005 and 2006 are a Hwacheon
+dual-spindle pair sharing a PC, so two machines legitimately answer to one
+hostname and the map and the agent disagree about which. Read the machine plate
+and the eDNC registry before running it.
+
+**3.1** On the bay, elevated:
+
+```powershell
+. C:\GE Aerospace\lib\Update-MachineNumber.ps1
+$r = Update-MTConnectVariantName -NewNumber '7801' `
+      -Root 'C:\MTConnect' `
+      -Targets @(
+        @{ Path='Agent\devices.xml';   Kind='attr' },
+        @{ Path='Adapter\devices.xml'; Kind='attr' },
+        @{ Path='Adapter\adapter.xml'; Kind='elem' }
+      ) `
+      -Services @('MTConnect Adapter Fanuc','MTConnect Agent Fanuc')
+$r.Updated; $r.Errors
+```
+
+**3.2** Verify the three files agree:
+
+```powershell
+Select-String -Path C:\MTConnect\Agent\devices.xml,C:\MTConnect\Adapter\devices.xml `
+              -Pattern 'name="[^"]+"' | Select-Object -First 2
+Select-String -Path C:\MTConnect\Adapter\adapter.xml -Pattern '<Device(Name|ID|UUID)>[^<]+'
+```
+
+All should read the same number. Then the HTTP probe as in 2.3 (port 5000).
+
+---
+
+## Part 4. Four Fanuc bays with no agent device name
+
+| machine (per map) | adapter says | PC when captured |
+|---|---|---|
+| **2013** | 4007 | `GJBJC724ESF` |
+| **7606** | 3126 | `G7QLY5X3ESF` |
+| **4002** | 4002 | `G6JLMSZ2ESF` |
+| **2001** | 3115 | `GB07T5X3ESF` |
+
+These are not a rename problem - the agent's `devices.xml` has no `<Device
+name=...>` at all, so the agent has nothing to serve. Do NOT run Part 3 on them.
+
+On each, collect and send back:
+
+```powershell
+Get-Service 'MTConnect*' | Select-Object Name,Status,StartType
+Get-Content C:\MTConnect\Agent\devices.xml -TotalCount 20
+Test-Path C:\MTConnect\Agent\devices.xml
+(Invoke-WebRequest http://localhost:5000/current -UseBasicParsing -TimeoutSec 5).StatusCode
+Get-Content C:\MTConnect\Agent\agent.log -Tail 30
+```
+
+Note three of the four also disagree with the hostname map on the number
+(4007 vs 2013, 3126 vs 7606, 3115 vs 2001), so these bays may have been
+re-purposed without a full reconfigure.
+
+---
+
+## Part 5. Two questions to settle
+
+**5.1 DMG Mori - do they need a bundle at all?**
+
+Five machines, all flagged `1,2,3` in the machine list, no bundle among the
+five we ship, and no captured variant. Their controllers are `DMG Mori F31i
+A5/B5` - Fanuc 31i underneath - so the Fanuc adapter may already serve them.
+
+| machine | PC per the machine list |
+|---|---|
+| WJ-7401 | `G1KDN7X2ESF` |
+| WJ-7402 | `G1KCR7X2ESF` |
+| WJ-7403 | `G1HYK7X2ESF` |
+| WJ-7404 | `G1HGQ7X2ESF` |
+| WJ-7405 | `G1KLM7X2ESF` |
+
+Those names come from the `Shop Floor PC Name` column of the OneDrive machine
+list and are subject to the same staleness - look the machine up in ShopDB for
+the PC that is actually on it today.
+
+On any one of them:
+
+```powershell
+Get-Service | Where-Object { $_.Name -match 'MTConnect|Makino|Coordinator' } |
+    Select-Object Name,Status,StartType
+Get-ChildItem C:\ -Directory | Where-Object Name -match 'MTConnect|DMG|Coordinator'
+(Invoke-WebRequest http://localhost:5000/current -UseBasicParsing -TimeoutSec 5).StatusCode
+```
+
+If they run the Fanuc bundle already, no new variant is needed and the DMG
+Coordinator MSI in the OneDrive zip can be ignored. If they collect some other
+way, or not at all, that is the answer to whether a sixth bundle is worth
+building.
+
+**5.2 Does the live v2 manifest carry the MTConnect entries?**
+
+You are on v2. The concern is that the MTConnect entries were left behind in
+the dead v1 manifest, in which case v2 bays are not getting MTConnect from the
+manifest engine at all.
+
+```powershell
+$m = Get-Content '\\tsgwp00525.wjs.geaerospace.net\shared\dt\shopfloor\main\machineapps\machineapps-manifest.json' -Raw | ConvertFrom-Json
+$m.Applications.Count
+$m.Applications | ForEach-Object { $_.Name }
+```
+
+Expect 8 applications, five of them MTConnect (fanuc, okuma, edncStandard,
+edncDualSpindle, makino). Anything less and the missing ones never made it to
+v2.
+
+---
+
+## A note on the CSVs
+
+Neither machine-to-PC list will age well: `mtconnect-hostname-machine-map.csv`
+(12 June) and the `Shop Floor PC Name` column in `West Jefferson_Machines.csv`
+are both hand-built snapshots, and every PC swap silently invalidates a row.
+
+ShopDB now maintains the PC-to-machine link from collector reports, so it
+corrects itself as bays are re-imaged. Anything that needs to go from a machine
+number to "which PC is on it today" should ask ShopDB; if a CSV is still wanted
+for offline use, generate it from ShopDB rather than editing it by hand.
+
+## What I still owe you
+
+- Auto-detection of controller and variant for a new machine. The inputs exist
+  (`mtconnect-bay-config.csv` has controller IP and FOCAS port per machine, the
+  machine list has the controller model, the collector already knows the machine
+  number at imaging time) - design pending.
+- The code fix is committed and pushed as `0d9c4fd` on `pxe-webapp-redesign`.
+  It changes future renames only; it does not reach out and fix these bays.

docs/post-deploy-checklist.live.html

@@ -0,0 +1,47 @@
+<!doctype html>
+<html><head>
+<meta charset="utf-8">
+<title>Post-Deploy Verification Checklist</title>
+<link rel="stylesheet" href="https://cdn.jsdelivr.net/npm/github-markdown-css/github-markdown.css">
+<style>
+  body { box-sizing: border-box; max-width: 980px; margin: 2em auto; padding: 0 2em; }
+  .markdown-body img { max-width: 100%; }
+  .markdown-body ul.task-list { list-style: none; padding-left: 0; }
+  .markdown-body li.task-list-item { list-style: none; }
+  .markdown-body li.task-list-item input[type=checkbox] { margin-right: .5em; transform: scale(1.2); }
+  @media print { body { max-width: none; margin: 0; padding: 1em; } }
+</style>
+</head><body class="markdown-body">
+<h1 id="post-deploy-checklist">Post-Deploy Checklist</h1>
+<p>Run after first boot. Sign off when all boxes checked. Fail any step, see <a href="post-deploy-debug-flowchart.md">post-deploy-debug-flowchart.md</a>.</p>
+<h2 id="1-common-shop-floor">1. Common Shop Floor</h2>
+<ul class="task-list">
+<li class="task-list-item"><input type="checkbox" disabled> <code>Shopfloor Tools</code> then <code>WJ Shopfloor</code> opens</li>
+<li class="task-list-item"><input type="checkbox" disabled> Login prompt and menu screen render</li>
+</ul>
+<p>Fail: check corp network, ping <code>WJFMS3.AE.GE.COM</code>.</p>
+<h2 id="2-controller-skip-if-standalone-pc">2. Controller (skip if standalone PC)</h2>
+<ul class="task-list">
+<li class="task-list-item"><input type="checkbox" disabled> <code>ping 192.168.1.1</code> returns 4 of 4 replies</li>
+<li class="task-list-item"><input type="checkbox" disabled> NTLARS General tab populated</li>
+<li class="task-list-item"><input type="checkbox" disabled> NTLARS FMS Host Primary set to <code>WJFMS3.AE.GE.COM</code> (FQDN)</li>
+</ul>
+<p>Fail ping, see <a href="post-deploy-debug-flowchart.md#2b-controller-nic-has-no-static-ip">2B NIC</a>.
+Blank General, see <a href="post-deploy-debug-flowchart.md#2a-ntlars-reg-file-never-imported-blank-general-tab-fields">2A reg load</a>.</p>
+<h2 id="3-udc-com-port">3. UDC COM port</h2>
+<ul class="task-list">
+<li class="task-list-item"><input type="checkbox" disabled> UDC opens with no machine-communication error dialog</li>
+<li class="task-list-item"><input type="checkbox" disabled> <code>Tools</code> then <code>Retry Connection</code> succeeds (no error)</li>
+<li class="task-list-item"><input type="checkbox" disabled> Port Name matches physical port: onboard COM1, PCIe card COM2 or COM4</li>
+<li class="task-list-item"><input type="checkbox" disabled> Data lines populate after reopen</li>
+</ul>
+<p>Fail, see <a href="post-deploy-debug-flowchart.md#step-4-set-the-correct-com-port">Step 4</a>.</p>
+<h2 id="4-printers-genspect-all-nearby">4. Printers (Genspect: all nearby)</h2>
+<ul class="task-list">
+<li class="task-list-item"><input type="checkbox" disabled> <code>Install Printers</code> shortcut opens</li>
+<li class="task-list-item"><input type="checkbox" disabled> Each nearby printer installed, status Ready</li>
+<li class="task-list-item"><input type="checkbox" disabled> Test page prints</li>
+<li class="task-list-item"><input type="checkbox" disabled> Genspect: default printer set</li>
+</ul>
+<p>Fail, see <a href="../printer-mapping.md">printer-mapping.md</a>.</p>
+</body></html>

docs/post-deploy-checklist.md

@@ -0,0 +1,37 @@
+# Post-Deploy Checklist
+
+Run after first boot. Sign off when all boxes checked. Fail any step, see [post-deploy-debug-flowchart.md](post-deploy-debug-flowchart.md).
+
+## 1. Common Shop Floor
+
+- [ ] `Shopfloor Tools` then `WJ Shopfloor` opens
+- [ ] Login prompt and menu screen render
+
+Fail: check corp network, ping `WJFMS3.AE.GE.COM`.
+
+## 2. Controller (skip if standalone PC)
+
+- [ ] `ping 192.168.1.1` returns 4 of 4 replies
+- [ ] NTLARS General tab populated
+- [ ] NTLARS FMS Host Primary set to `WJFMS3.AE.GE.COM` (FQDN)
+
+Fail ping, see [2B NIC](post-deploy-debug-flowchart.md#2b-controller-nic-has-no-static-ip).
+Blank General, see [2A reg load](post-deploy-debug-flowchart.md#2a-ntlars-reg-file-never-imported-blank-general-tab-fields).
+
+## 3. UDC COM port
+
+- [ ] UDC opens with no machine-communication error dialog
+- [ ] `Tools` then `Retry Connection` succeeds (no error)
+- [ ] Port Name matches physical port: onboard COM1, PCIe card COM2 or COM4
+- [ ] Data lines populate after reopen
+
+Fail, see [Step 4](post-deploy-debug-flowchart.md#step-4-set-the-correct-com-port).
+
+## 4. Printers (Genspect: all nearby)
+
+- [ ] `Install Printers` shortcut opens
+- [ ] Each nearby printer installed, status Ready
+- [ ] Test page prints
+- [ ] Genspect: default printer set
+
+Fail, see [printer-mapping.md](../printer-mapping.md).

docs/post-deploy-checklist.static.html

@@ -0,0 +1,59 @@
+<!doctype html>
+<html><head>
+<meta charset="utf-8">
+<title>Post-Deploy Verification Checklist</title>
+<style>
+  body { font-family: -apple-system, system-ui, "Segoe UI", sans-serif; max-width: 980px; margin: 2em auto; padding: 0 2em; line-height: 1.5; color: #24292f; }
+  h1, h2, h3 { border-bottom: 1px solid #d0d7de; padding-bottom: .3em; scroll-margin-top: 1em; }
+  h1 { font-size: 2em; }
+  code { background: #f6f8fa; padding: .2em .4em; border-radius: 6px; font-size: 85%; }
+  pre { background: #f6f8fa; padding: 1em; border-radius: 6px; overflow: auto; }
+  pre code { background: none; padding: 0; }
+  table { border-collapse: collapse; }
+  table th, table td { border: 1px solid #d0d7de; padding: 6px 13px; }
+  table tr:nth-child(2n) { background: #f6f8fa; }
+  img { max-width: 100%; height: auto; }
+  blockquote { border-left: .25em solid #d0d7de; padding: 0 1em; color: #57606a; }
+  ul.task-list, li.task-list-item { list-style: none; }
+  ul.task-list { padding-left: 0; }
+  li.task-list-item input[type=checkbox] { margin-right: .5em; transform: scale(1.2); }
+  hr { border: 0; border-top: 1px solid #d0d7de; margin: 2em 0; }
+  @media print {
+    body { max-width: none; margin: 0; padding: 1em; }
+    input[type=checkbox] { -webkit-print-color-adjust: exact; print-color-adjust: exact; }
+  }
+</style>
+</head><body>
+<h1 id="post-deploy-checklist">Post-Deploy Checklist</h1>
+<p>Run after first boot. Sign off when all boxes checked. Fail any step, see <a href="post-deploy-debug-flowchart.md">post-deploy-debug-flowchart.md</a>.</p>
+<h2 id="1-common-shop-floor">1. Common Shop Floor</h2>
+<ul class="task-list">
+<li class="task-list-item"><input type="checkbox" disabled> <code>Shopfloor Tools</code> then <code>WJ Shopfloor</code> opens</li>
+<li class="task-list-item"><input type="checkbox" disabled> Login prompt and menu screen render</li>
+</ul>
+<p>Fail: check corp network, ping <code>WJFMS3.AE.GE.COM</code>.</p>
+<h2 id="2-controller-skip-if-standalone-pc">2. Controller (skip if standalone PC)</h2>
+<ul class="task-list">
+<li class="task-list-item"><input type="checkbox" disabled> <code>ping 192.168.1.1</code> returns 4 of 4 replies</li>
+<li class="task-list-item"><input type="checkbox" disabled> NTLARS General tab populated</li>
+<li class="task-list-item"><input type="checkbox" disabled> NTLARS FMS Host Primary set to <code>WJFMS3.AE.GE.COM</code> (FQDN)</li>
+</ul>
+<p>Fail ping, see <a href="post-deploy-debug-flowchart.md#2b-controller-nic-has-no-static-ip">2B NIC</a>.
+Blank General, see <a href="post-deploy-debug-flowchart.md#2a-ntlars-reg-file-never-imported-blank-general-tab-fields">2A reg load</a>.</p>
+<h2 id="3-udc-com-port">3. UDC COM port</h2>
+<ul class="task-list">
+<li class="task-list-item"><input type="checkbox" disabled> UDC opens with no machine-communication error dialog</li>
+<li class="task-list-item"><input type="checkbox" disabled> <code>Tools</code> then <code>Retry Connection</code> succeeds (no error)</li>
+<li class="task-list-item"><input type="checkbox" disabled> Port Name matches physical port: onboard COM1, PCIe card COM2 or COM4</li>
+<li class="task-list-item"><input type="checkbox" disabled> Data lines populate after reopen</li>
+</ul>
+<p>Fail, see <a href="post-deploy-debug-flowchart.md#step-4-set-the-correct-com-port">Step 4</a>.</p>
+<h2 id="4-printers-genspect-all-nearby">4. Printers (Genspect: all nearby)</h2>
+<ul class="task-list">
+<li class="task-list-item"><input type="checkbox" disabled> <code>Install Printers</code> shortcut opens</li>
+<li class="task-list-item"><input type="checkbox" disabled> Each nearby printer installed, status Ready</li>
+<li class="task-list-item"><input type="checkbox" disabled> Test page prints</li>
+<li class="task-list-item"><input type="checkbox" disabled> Genspect: default printer set</li>
+</ul>
+<p>Fail, see <a href="../printer-mapping.md">printer-mapping.md</a>.</p>
+</body></html>

docs/post-deploy-debug-flowchart.md

@@ -24,7 +24,7 @@ flowchart TD
     U2 --> U3[Tools - Options - Serial tab]
     U3 --> U4{Which physical COM port is the cable in?}
     U4 -->|Intel / onboard| U5[Set Port Name = COM 1]
-    U4 -->|PCIe add-in card| U6[Set Port Name = COM 2]
+    U4 -->|PCIe add-in card| U6[Set Port Name = COM 2 or COM 4]
     U5 --> U7[Save - File - Exit - reopen UDC]
     U6 --> U7
     U7 --> U8([Verify data lines populate])
@@ -51,7 +51,7 @@ flowchart TD
     click U3 "#step-3-open-options" "Step 3 - Options"
     click U4 "#step-4-set-the-correct-com-port" "Step 4 - COM port"
     click U5 "#step-4-set-the-correct-com-port" "Step 4 - COM 1"
-    click U6 "#step-4-set-the-correct-com-port" "Step 4 - COM 2"
+    click U6 "#step-4-set-the-correct-com-port" "Step 4 - COM 2 or COM 4"
     click U7 "#step-5-exit-to-apply" "Step 5 - Exit"
 
     click D2 "#2a-ntlars-reg-file-never-imported-blank-general-tab-fields" "2A - Load reg backup"
@@ -113,7 +113,7 @@ Click the **Serial** tab on the left. Set **Port Name** to match the **physical*
 
   ![PC rear - onboard COM1 port](images/post-deploy/Figure_5_UDC_not_collecting_data_enable_admin_options_serial_intel_com1_physical.png)
 
-- **COM 2** = PCIe add-in serial card
+- **COM 2 or COM 4** = PCIe add-in serial card (Windows enumeration varies by hardware - check Device Manager -> Ports if unsure)
 
   Logical:
 
@@ -138,7 +138,7 @@ Reopen UDC. Data lines should start populating as the machine runs.
 ### If data still does not appear
 
 Once the COM port is correct, ~~rule out~~ check these in order:
-- Wrong physical cable - cable is in COM1 socket but Port Name set to COM 2 (or vice versa). Re-check Step 4.
+- Wrong physical cable - cable is in COM1 socket but Port Name set to COM 2 / COM 4 (or vice versa). Re-check Step 4.
 - Cable / connector damaged - swap with a known-good cable.
 - Machine controller side not transmitting - confirm at the controller HMI.
 

docs/pxe-nic-guard.md

@@ -0,0 +1,203 @@
+# PXE NIC guard
+
+The PXE server's DHCP/PXE (dnsmasq) must never serve on the GE corporate
+network. Each server has two NICs:
+
+| Role    | Network                     | Address                          |
+|---------|-----------------------------|----------------------------------|
+| imaging | isolated imaging switch     | static 172.16.9.1/24, dnsmasq    |
+| ge      | GE corporate network        | DHCP client (systemd-networkd)   |
+
+`/etc/dnsmasq.d/pxe-nic-only.conf` pins dnsmasq to the imaging NIC by name.
+That stops dnsmasq answering on the GE NIC, but not on the imaging NIC when
+that NIC itself ends up on the wrong network: a cable swap, an imaging
+switch uplinked into a GE port, or a second PXE server on the same switch.
+The NIC guard catches those.
+
+## What is installed
+
+| File                                                      | Purpose                         |
+|-----------------------------------------------------------|---------------------------------|
+| `/usr/local/sbin/pxe-nic-check`                           | the classifier                  |
+| `/etc/pxe-server/nic.conf`                                | which NIC is which              |
+| `/etc/systemd/system/dnsmasq.service.d/nic-guard.conf`    | guard before every dnsmasq start|
+| `/etc/systemd/system/pxe-nic-check.{service,timer}`       | watch every 5 min               |
+| `/usr/local/sbin/pxe-nic-carrier`                         | re-check on imaging cable moves |
+| `/etc/networkd-dispatcher/<state>.d/50-pxe-nic-carrier`   | calls it on link changes        |
+| `/etc/systemd/system/pxe-nic-carrier.service`             | the re-check after carrier gain |
+| `/run/pxe-nic-status.json`                                | last result, read by the webapp |
+
+Sources: `playbook/pxe-server-helpers/`, installed by `pxe_server_setup.yml`
+(vars `pxe_nic_mac`, `corp_nic_mac`, `pxe_corp_domain_suffixes`,
+`pxe_nic_allowed_switches`; `pxe_imaging_mac` / `pxe_ge_mac` are derived
+from the first two). The same MACs pin the NICs in netplan
+(`playbook/templates/netplan-pxe.yaml.j2`, names `pxe0` / `corp0`) and in
+`/etc/dnsmasq.d/pxe-nic-only.conf`. With `pxe_nic_mac` empty the playbook
+picks the imaging NIC at install time with `pxe-pick-nic --auto`, which
+runs this check on the one port with a link (`--iface X --probe`, 65 s)
+and accepts only "isolated". With `corp_nic_mac` empty `ge_mac` is blank
+and the GE NIC is whichever other port holds a DHCP lease.
+
+## How it decides
+
+It listens on each NIC (raw socket, sends nothing; it joins the STP,
+802.1X, LLDP, CDP and PVST+ multicast groups so a NIC that is not
+promiscuous still hears them) for:
+
+- LLDP and CDP: managed switches announce themselves. GE switches do; the
+  unmanaged imaging switch does not.
+- 802.1X EAPOL from an authenticator: GE ports ask for port
+  authentication (EAP Request, Success or Failure). EAPOL that clients
+  send is ignored: iPXE sends three EAPOL-Starts every time it opens a
+  NIC and Windows sends Starts and EAP Responses, so a bay PXE-booting on
+  the imaging switch is not mistaken for a GE port. Those frames show up
+  only as "N client EAPOL frames ignored".
+- DHCP OFFER/ACK from any other server.
+- STP and the count of distinct ARP hosts: reported, never decisive.
+
+On the imaging NIC it also sends one DHCPDISCOVER and collects offers for
+6 s. On the GE NIC it reads the networkd lease instead (no traffic).
+
+| Verdict        | Meaning                                                    |
+|----------------|------------------------------------------------------------|
+| `isolated`     | no foreign DHCP, no LLDP/CDP/EAPOL                         |
+| `ge`           | LLDP, CDP or EAPOL seen, or a DHCP server whose domain ends in a corp suffix (`geaerospace.net`, `ge.com`; whole labels, so `notgeaerospace.net` does not count) |
+| `foreign-dhcp` | another DHCP server, no corp domain                        |
+| `no-link`      | no carrier                                                 |
+| `error`        | the check itself failed                                    |
+
+Healthy: imaging NIC `isolated` (or `no-link`), GE NIC `ge`.
+
+Our own dnsmasq never counts. An offer whose server id is our own address
+but comes from a MAC that is not ours is a second PXE server and DOES count.
+
+If the imaging switch is itself a managed switch that sends LLDP/CDP, put
+its LLDP system name, CDP device id or chassis MAC in `allowed_switches`
+(`pxe_nic_allowed_switches`), or the guard will block dnsmasq. 802.1X is
+never allowed.
+
+## Modes
+
+- `pxe-nic-check` - check every NIC (60 s), print a summary. `--json`,
+  `--write`, `--probe` (imaging DHCP probe), `--iface NAME`, `--window S`.
+- `pxe-nic-check --guard` - dnsmasq `ExecStartPre`. Imaging NIC only,
+  about 6 s. Exit 1 = do not serve: dnsmasq does not start. A bug or no
+  link exits 0 (fail open) with an error line in the journal.
+- `pxe-nic-check --watch` - the timer. On a bad imaging verdict it runs
+  `systemctl stop dnsmasq` and logs CRIT. It never starts dnsmasq. If
+  dnsmasq was (re)started during the 60 s window (an operator, or the
+  carrier hook, restarted it and its guard passed), the watch re-checks
+  for about 6 s and stops dnsmasq only if that still says blocked; if
+  dnsmasq is already stopped it only logs.
+- `pxe-nic-carrier` - the networkd-dispatcher hook. Only the imaging NIC
+  (or its bridge ports) counts; GE NIC events are ignored. Carrier lost:
+  dnsmasq is stopped at once if it was running. Carrier back: after 2 s,
+  `pxe-nic-carrier.service` restarts dnsmasq if it was running or the hook
+  stopped it, so the guard checks the new network before dnsmasq serves
+  again; dnsmasq that an operator or the watch stopped stays stopped.
+  A bridge with several ports stops dnsmasq when any one of them loses
+  carrier. Log: `journalctl -t pxe-nic-carrier`.
+
+Every start or restart of dnsmasq runs the guard, so `systemctl restart
+dnsmasq` and the `@reboot` cron restart take about 6 s longer than before.
+
+## Reading it
+
+    sudo pxe-nic-check                       # full summary, 60 s
+    cat /run/pxe-nic-status.json             # last guard/watch result
+    journalctl -u dnsmasq -b | grep pxe-nic-check
+    journalctl -u pxe-nic-check -b
+    journalctl -t pxe-nic-carrier -b         # cable unplug / replug
+
+## dnsmasq will not start
+
+1. `journalctl -u dnsmasq -b | grep pxe-nic-check` shows the evidence, e.g.
+   `REFUSING to start dnsmasq: imaging NIC br-pxe verdict ge: LLDP from
+   WJ-IDF2 port Gi1/0/14`.
+2. Check the imaging cabling: the imaging NIC must go to the imaging
+   switch only, and that switch must not be uplinked anywhere.
+3. `sudo pxe-nic-check` until the imaging NIC reads `isolated`.
+4. `sudo systemctl start dnsmasq` (runs the guard again).
+
+## Floor tests (run with the floor idle)
+
+All three tests stop imaging for a few minutes. Have console or GE-side SSH
+access to the server; do not rely on the imaging network for the session.
+
+### (a) Rogue DHCP on the imaging switch: expect the alarm
+
+1. Confirm the baseline: `sudo pxe-nic-check --probe` shows the imaging
+   NIC `isolated` and `dnsmasq_bound` true.
+2. Plug a device that runs a DHCP server into a free port of the IMAGING
+   switch (a spare home router with DHCP on, LAN port only, nothing in its
+   WAN port; or a laptop running dnsmasq).
+3. Run the watch now instead of waiting up to 5 min:
+   `sudo systemctl start pxe-nic-check.service`
+4. Expect:
+   - `journalctl -u pxe-nic-check -n 20` has a CRIT line `imaging NIC is
+     NOT isolated, stopping dnsmasq: ... verdict foreign-dhcp: DHCP from
+     192.168.x.1, ...` (or `ge` if the router sends LLDP).
+   - `systemctl is-active dnsmasq` is `inactive`.
+   - `/run/pxe-nic-status.json` has `"dhcp_guard": {"state": "blocked", ...}`.
+5. Prove the guard too: `sudo systemctl start dnsmasq` must FAIL, and
+   `journalctl -u dnsmasq -n 20` shows `REFUSING to start dnsmasq`.
+6. Unplug the rogue device. `sudo pxe-nic-check --probe` shows `isolated`.
+   `sudo systemctl start dnsmasq` starts. PXE-boot one client to confirm.
+
+### (b) Cable swap into a GE port: expect the guard to refuse dnsmasq
+
+dnsmasq must be stopped BEFORE the cable moves, so it never serves on GE.
+
+1. `sudo systemctl stop dnsmasq`; `systemctl is-active dnsmasq` must say
+   `inactive`. Do not reboot during the test (the `@reboot` cron restarts
+   dnsmasq; the guard would still block it, but do not test that way).
+2. Move the IMAGING NIC's cable from the imaging switch into a live GE
+   network port. Wait for link: `ip -br link` shows the imaging NIC `UP`.
+   The carrier hook sees the link come up and runs the guard once (one
+   DHCPDISCOVER) to refresh the status file; with dnsmasq stopped it does
+   not start it. `journalctl -t pxe-nic-carrier -n 5` shows `dnsmasq was
+   not running, left stopped`.
+3. Run the guard by hand first:
+   `sudo pxe-nic-check --guard; echo "exit $?"`
+   Expect `exit 1` and a `REFUSING to start dnsmasq` line naming LLDP/CDP,
+   802.1X, or `DHCP from 10.x.x.x, domain ....geaerospace.net`.
+   This sends one DHCPDISCOVER on the GE port, the same as any PC being
+   plugged in. To send nothing, use `--no-probe --window 60` instead and
+   rely on LLDP/CDP/802.1X (switches announce every 30-60 s).
+   **If it exits 0, STOP: do not start dnsmasq. Move the cable back and
+   send the output of `sudo pxe-nic-check --probe --json`.**
+4. Only after step 3 exited 1: `sudo systemctl start dnsmasq`. Expect
+   `Job for dnsmasq.service failed`; `systemctl is-active dnsmasq` says
+   `failed`; `journalctl -u dnsmasq -n 20` shows `REFUSING`.
+5. Move the cable back to the imaging switch. `sudo pxe-nic-check --probe`
+   shows the imaging NIC `isolated`. `sudo systemctl start dnsmasq`
+   starts. PXE-boot one client to confirm.
+
+### (c) Imaging cable unplugged and replugged: expect stop, re-check, start
+
+1. dnsmasq running, imaging NIC `isolated`.
+2. Unplug the imaging NIC's cable. Within a second
+   `journalctl -t pxe-nic-carrier -n 5` shows `carrier lost on imaging NIC
+   ... stopped dnsmasq` and `systemctl is-active dnsmasq` is `inactive`.
+3. Plug it back into the imaging switch. About 10 s later the journal
+   shows `guard passed, dnsmasq (re)started` and dnsmasq is `active`.
+   Had it gone into a GE port instead, the guard refuses: the journal
+   shows `dnsmasq NOT started` and dnsmasq stays down.
+
+## Status file
+
+`/run/pxe-nic-status.json`, mode 0644, replaced atomically:
+
+    {"checked_at": "2026-10-14T16:47:09-04:00", "duration_s": 60,
+     "dhcp_guard": {"state": "allowed"|"blocked"|"unknown", "reason": "..."},
+     "interfaces": [{"iface": "br-pxe", "mac": "aa:bb:..", "role": "imaging"|"ge"|"other",
+       "link": "up"|"down", "speed_mbps": 5000, "addrs": ["172.16.9.1/24"],
+       "verdict": "isolated"|"ge"|"foreign-dhcp"|"no-link"|"error", "evidence": ["..."],
+       "dhcp_servers": [{"server": "10.1.2.3", "domain": "x.geaerospace.net", "own": false}],
+       "switch": {"lldp": [{"system": "...", "port": "...", "vlan": null}],
+                  "cdp": [{"device": "...", "port": "..."}], "eapol": false, "stp": false},
+       "arp_hosts": 3, "dnsmasq_bound": true}]}
+
+`dnsmasq_bound` is null when it cannot be told (no `ss`). A bridge
+(br-pxe) is reported as one interface; its ports are listened on too,
+because LLDP and 802.1X frames stop at the port and never reach the bridge.

docs/shopfloor-machine-imaging-guide.md

@@ -6,7 +6,7 @@ Step-by-step for imaging a new (or replacement) shopfloor PC that will sit at a
 
 - PC connected to the **PXE switch** (not the production network yet)
 - USB mouse + keyboard connected
-- PXE server is running and reachable (verify by pinging `10.9.100.1` from another PC on the same switch)
+- PXE server is running and reachable (verify by pinging `172.16.9.1` from another PC on the same switch)
 - **Target machine number** known (e.g., `7605`) — you can enter it at PXE time, or use `9999` as a placeholder if the PC will be configured at the bay later
 - **ARTS Lockdown request submitted** for this PC (or know that you'll submit one mid-imaging)
 
@@ -229,7 +229,7 @@ The script needs a desktop session. Won't run via WinRM/SSH/non-interactive. Mak
 
 ## Reference
 
-- **PXE server**: `10.9.100.1`
+- **PXE server**: `172.16.9.1`
 - **SFLD share**: `\\tsgwp00525.wjs.geaerospace.net\shared\dt\shopfloor\`
 - **Manifest engine log**: `C:\GE Aerospace\machineapps-enforce.log`
 - **Intune sync transcript**: `C:\Logs\SFLD\sync_intune_transcript.txt`

playbook/FlatUnattendW10-engineer.xml

@@ -0,0 +1,414 @@
+<?xml version="1.0" encoding="utf-8"?>
+<unattend xmlns="urn:schemas-microsoft-com:unattend"
+          xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
+          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+
+  <!-- 1. windowsPE is intentionally empty -->
+  <settings pass="windowsPE" />
+
+  <!-- 2. Offline servicing (drivers) -->
+  <settings pass="offlineServicing">
+    <component name="Microsoft-Windows-PnpCustomizationsNonWinPE"
+               processorArchitecture="amd64"
+               publicKeyToken="31bf3856ad364e35"
+               language="neutral"
+               versionScope="nonSxS">
+      <DriverPaths>
+        <PathAndCredentials wcm:action="add" wcm:keyValue="1">
+          <Path>W:\Drivers</Path>
+        </PathAndCredentials>
+        <PathAndCredentials wcm:action="add" wcm:keyValue="2">
+          <Path>W:\Deploy\Applications\extra\printdrivers\BROTHER\UNIV-PS-01181\PS\64</Path>
+        </PathAndCredentials>
+        <PathAndCredentials wcm:action="add" wcm:keyValue="3">
+          <Path>W:\Deploy\Applications\extra\printdrivers\HP</Path>
+        </PathAndCredentials>
+        <PathAndCredentials wcm:action="add" wcm:keyValue="4">
+          <Path>W:\Deploy\Applications\extra\printdrivers\XEROX\UNIV_5.1035.2.0_PS_x64_Driver</Path>
+        </PathAndCredentials>
+      </DriverPaths>
+    </component>
+  </settings>
+
+  <!-- 3. specialize: computer naming + RunSynchronous all in ONE component -->
+  <settings pass="specialize">
+    <!-- 3a. Shell-Setup for naming/owner/org -->
+    <component name="Microsoft-Windows-Shell-Setup"
+               processorArchitecture="amd64"
+               publicKeyToken="31bf3856ad364e35"
+               language="neutral"
+               versionScope="nonSxS">
+      <ComputerName>H%serialnumber%</ComputerName>
+      <RegisteredOrganization>GE Aerospace</RegisteredOrganization>
+      <RegisteredOwner>GE</RegisteredOwner>
+      <TimeZone>Eastern Standard Time</TimeZone>
+    </component>
+
+    <!-- 3b. RunSynchronous for all of your installers, copies, etc. -->
+    <component name="Microsoft-Windows-Deployment"
+               processorArchitecture="amd64"
+               publicKeyToken="31bf3856ad364e35"
+               language="neutral"
+               versionScope="nonSxS">
+      <RunSynchronous>
+
+        <!-- INTERNETACCESS bootstrap profile. BLUESSO and EAP-PEAP were removed:
+             the MCL ppkg installs both, and BLUESSO cannot bootstrap (hidden
+             SSID, manual connect, user password). wlansvc must be started
+             first or netsh silently fails. -->
+        <RunSynchronousCommand wcm:action="add">
+            <Order>1</Order>
+            <Path>cmd /c sc config wlansvc start= auto &amp; net start wlansvc &amp; exit /b 0</Path>
+            <Description>Start WLAN AutoConfig so the WiFi profile can be added</Description>
+        </RunSynchronousCommand>
+				<!-- PXE imaging floor progress (best-effort, never fails setup). -Persist copies the script
+				     out of C:\Deploy, which the bulk-enrollment task deletes before first logon.
+				     RunSynchronous Path max 259 chars: check with scripts/lint-unattend.py (local mode). -->
+				<RunSynchronousCommand wcm:action="add">
+					<Order>2</Order>
+					<Path>powershell.exe -NoP -EP Bypass -File C:\Deploy\Applications\extra\pxe-status\Send-ImagingStage.ps1 -Persist -PCType gea-engineer -StageIndex 2 -Stage "Windows setup: installing apps"</Path>
+					<Description>PXE status: stage 2 of 5</Description>
+				</RunSynchronousCommand>
+        <RunSynchronousCommand wcm:action="add">
+          <Order>3</Order>
+          <Path>cmd /c netsh wlan add profile filename="C:\Deploy\Applications\extra\wireless\WiFi-Profile.xml" user=all</Path>
+          <Description>Add generic WiFi profile</Description>
+        </RunSynchronousCommand>
+
+        <!-- Certificates -->
+        <RunSynchronousCommand wcm:action="add">
+          <Order>4</Order>
+          <Path>cmd /c certutil -addstore Root "C:\Deploy\Applications\GE_External_Root_CA_2_1.cer"</Path>
+          <Description>Install External Root Certificate</Description>
+        </RunSynchronousCommand>
+        <RunSynchronousCommand wcm:action="add">
+          <Order>5</Order>
+          <Path>cmd /c certutil -addstore CA "C:\Deploy\Applications\GE_External_Intermediate_CA_2_1.cer"</Path>
+          <Description>Install External Intermediate Certificate</Description>
+        </RunSynchronousCommand>
+        <RunSynchronousCommand wcm:action="add">
+          <Order>6</Order>
+          <Path>cmd /c certutil -addstore Root "C:\Deploy\Applications\GE_Enterprise_Root_CA_2_1.cer"</Path>
+          <Description>Install Enterprise Root Certificate</Description>
+        </RunSynchronousCommand>
+        <RunSynchronousCommand wcm:action="add">
+          <Order>7</Order>
+          <Path>cmd /c certutil -addstore CA "C:\Deploy\Applications\GE_Enterprise_Device_Issuing_CA_2_1.cer"</Path>
+          <Description>Install Enterprise Device Issuing Certificate</Description>
+        </RunSynchronousCommand>
+        <RunSynchronousCommand wcm:action="add">
+          <Order>8</Order>
+          <Path>cmd /c certutil -addstore CA "C:\Deploy\Applications\GE_Enterprise_Server_Issuing_CA_2_1.cer"</Path>
+          <Description>Install Enterprise Server Issuing Certificate</Description>
+        </RunSynchronousCommand>
+        <RunSynchronousCommand wcm:action="add">
+          <Order>9</Order>
+          <Path>cmd /c certutil -addstore CA "C:\Deploy\Applications\GE_Enterprise_Smart_Card_Issuing_CA_2_1.cer"</Path>
+          <Description>Install SmartCard Issuing Certificate</Description>
+        </RunSynchronousCommand>
+        <RunSynchronousCommand wcm:action="add">
+          <Order>10</Order>
+          <Path>cmd /c certutil -addstore CA "C:\Deploy\Applications\GE_Enterprise_User_Issuing_CA_2_1.cer"</Path>
+          <Description>Install User Issuing Certificate</Description>
+        </RunSynchronousCommand>
+        <RunSynchronousCommand wcm:action="add">
+          <Order>11</Order>
+          <Path>cmd /c certutil -addstore Root "C:\Deploy\Applications\GE_Aerospace_Enterprise_Root_CA_1.cer"</Path>
+          <Description>Install Aerospace Enterprise Root CA</Description>
+        </RunSynchronousCommand>
+        <RunSynchronousCommand wcm:action="add">
+          <Order>12</Order>
+          <Path>cmd /c certutil -addstore Root "C:\Deploy\Applications\ZscalerCommercialCertificate-2048-SHA256.crt"</Path>
+          <Description>Install Zscaler Certificate</Description>
+        </RunSynchronousCommand>
+
+        <!-- Fonts -->
+        <RunSynchronousCommand wcm:action="add">
+          <Order>13</Order>
+          <Path>cmd /c copy "C:\Deploy\Applications\extra\fonts\3OF9.TTF" "%WINDIR%\Fonts\" /Y</Path>
+          <Description>Copy 3OF9 Font</Description>
+        </RunSynchronousCommand>
+        <RunSynchronousCommand wcm:action="add">
+          <Order>14</Order>
+          <Path>cmd /c reg add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Fonts" /v "3 of 9 Barcode" /t REG_SZ /d "3OF9.TTF" /f</Path>
+          <Description>Register 3OF9 Barcode Font</Description>
+        </RunSynchronousCommand>
+        <RunSynchronousCommand wcm:action="add">
+          <Order>15</Order>
+          <Path>cmd /c copy "C:\Deploy\Applications\extra\fonts\Code39AzaleaNarrow3.ttf" "%WINDIR%\Fonts\" /Y</Path>
+          <Description>Copy Code39 Azalea Narrow Font</Description>
+        </RunSynchronousCommand>
+        <RunSynchronousCommand wcm:action="add">
+          <Order>16</Order>
+          <Path>cmd /c reg add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Fonts" /v "Code39AzaleaNarrow3" /t REG_SZ /d "Code39AzaleaNarrow3.ttf" /f</Path>
+          <Description>Register Code39 Azalea Narrow Font</Description>
+        </RunSynchronousCommand>
+        <RunSynchronousCommand wcm:action="add">
+          <Order>17</Order>
+          <Path>cmd /c copy "C:\Deploy\Applications\extra\fonts\Code39Azalea.ttf" "%WINDIR%\Fonts\" /Y</Path>
+          <Description>Copy Code39 Azalea Font</Description>
+        </RunSynchronousCommand>
+        <RunSynchronousCommand wcm:action="add">
+          <Order>18</Order>
+          <Path>cmd /c reg add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Fonts" /v "Code39Azalea" /t REG_SZ /d "Code39Azalea.ttf" /f</Path>
+          <Description>Register Code39 Azalea Font</Description>
+        </RunSynchronousCommand>
+
+        <!-- OpenText installers -->
+        <RunSynchronousCommand wcm:action="add">
+          <Order>19</Order>
+          <Path>cmd /c "C:\Deploy\Applications\extra\opentext\Setup-OpenText.cmd"</Path>
+          <Description>Install OpenText HostExplorer SP1 (shopfloor method)</Description>
+        </RunSynchronousCommand>
+        <RunSynchronousCommand wcm:action="add">
+          <Order>20</Order>
+          <Path>C:\Deploy\Applications\extra\opentext\J2SE_Runtime_Environment_1.6.0_22_Static_Config_V2_Co-Exist.EXE /silent /norestart</Path>
+          <Description>Install J2SE Runtime Environment 1.6.0_22</Description>
+        </RunSynchronousCommand>
+
+        <!-- Adobe -->
+        <RunSynchronousCommand wcm:action="add">
+          <Order>22</Order>
+          <Path>msiexec /i "C:\Deploy\Applications\extra\adobe\AcroRead.msi" TRANSFORMS="C:\Deploy\Applications\extra\adobe\AcroRead.mst" /quiet /norestart</Path>
+          <Description>Install Adobe</Description>
+        </RunSynchronousCommand>
+        <RunSynchronousCommand wcm:action="add">
+          <Order>23</Order>
+          <Path>msiexec /p "C:\Deploy\Applications\extra\adobe\AcroRdrDCUpd2500120531.msp" /quiet /norestart</Path>
+          <Description>Apply Adobe Reader Update</Description>
+        </RunSynchronousCommand> 
+        
+        <!-- Java JRE 8 Enterprise Installation -->
+        <RunSynchronousCommand wcm:action="add">
+          <Order>26</Order>
+          <Path>C:\Deploy\Applications\extra\java\jre-8u441-windows-i586.exe /s INSTALLDIR="C:\Program Files (x86)\Java\jre1.8.0_441" STATIC=1 AUTO_UPDATE=0 REBOOT=0 SPONSORS=0 WEB_JAVA=0 /L "C:\Windows\Logs\java-install.log"</Path>
+          <Description>Install Java JRE 8 Update 441 with Enterprise Settings and Logging</Description>
+        </RunSynchronousCommand>
+
+        <!-- Disable Java Auto Updates via Registry (64-bit) -->
+        <RunSynchronousCommand wcm:action="add">
+          <Order>27</Order>
+          <Path>cmd /c reg add "HKLM\SOFTWARE\JavaSoft\Java Update\Policy" /v EnableJavaUpdate /t REG_DWORD /d 0 /f</Path>
+          <Description>Disable Java Auto Updates (64-bit)</Description>
+        </RunSynchronousCommand>
+
+        <!-- Disable Java Auto Updates via Registry (32-bit) -->
+        <RunSynchronousCommand wcm:action="add">
+          <Order>28</Order>
+          <Path>cmd /c reg add "HKLM\SOFTWARE\Wow6432Node\JavaSoft\Java Update\Policy" /v EnableJavaUpdate /t REG_DWORD /d 0 /f</Path>
+          <Description>Disable Java Auto Updates (32-bit)</Description>
+        </RunSynchronousCommand>
+
+        <!-- Disable Java Auto Update Check (64-bit) -->
+        <RunSynchronousCommand wcm:action="add">
+          <Order>29</Order>
+          <Path>cmd /c reg add "HKLM\SOFTWARE\JavaSoft\Java Update\Policy" /v EnableAutoUpdateCheck /t REG_DWORD /d 0 /f</Path>
+          <Description>Disable Java Auto Update Check (64-bit)</Description>
+        </RunSynchronousCommand>
+
+        <!-- Disable Java Auto Update Check (32-bit) -->
+        <RunSynchronousCommand wcm:action="add">
+          <Order>30</Order>
+          <Path>cmd /c reg add "HKLM\SOFTWARE\Wow6432Node\JavaSoft\Java Update\Policy" /v EnableAutoUpdateCheck /t REG_DWORD /d 0 /f</Path>
+          <Description>Disable Java Auto Update Check (32-bit)</Description>
+        </RunSynchronousCommand>
+
+        <!-- Disable Cortana -->
+        <RunSynchronousCommand wcm:action="add">
+          <Order>31</Order>
+          <Path>cmd /c reg add "HKLM\SOFTWARE\Policies\Microsoft\Windows\Windows Search" /v AllowCortana /t REG_DWORD /d 0 /f</Path>
+          <Description>Disable Cortana</Description>
+        </RunSynchronousCommand>
+
+        <!-- Disable Web Search in Start Menu -->
+        <RunSynchronousCommand wcm:action="add">
+          <Order>33</Order>
+          <Path>cmd /c reg add "HKLM\SOFTWARE\Policies\Microsoft\Windows\Windows Search" /v DisableWebSearch /t REG_DWORD /d 1 /f</Path>
+          <Description>Disable Web Search in Start Menu</Description>
+        </RunSynchronousCommand>
+
+        <!-- Disable Bing / web search suggestions in Start menu.
+             BingSearchEnabled is documented at HKCU\Software\Microsoft\Windows\CurrentVersion\Search
+             (not HKLM), so the old HKLM policy placement was a no-op. The current documented
+             suppression is DisableSearchBoxSuggestions=1 at Software\Policies\Microsoft\Windows\Explorer.
+             Writing it into the Default User hive so every newly-created account inherits it. -->
+        <RunSynchronousCommand wcm:action="add">
+          <Order>34</Order>
+          <Path>cmd /c reg load HKU\TempDU C:\Users\Default\NTUSER.DAT &amp; reg add "HKU\TempDU\Software\Policies\Microsoft\Windows\Explorer" /v DisableSearchBoxSuggestions /t REG_DWORD /d 1 /f &amp; reg unload HKU\TempDU</Path>
+          <Description>Disable Bing/web search suggestions (Default User hive)</Description>
+        </RunSynchronousCommand>
+
+        <!-- Disable Search Web when searching Windows -->
+        <RunSynchronousCommand wcm:action="add">
+          <Order>35</Order>
+          <Path>cmd /c reg add "HKLM\SOFTWARE\Policies\Microsoft\Windows\Windows Search" /v ConnectedSearchUseWeb /t REG_DWORD /d 0 /f</Path>
+          <Description>Disable Connected Search Use Web</Description>
+        </RunSynchronousCommand>
+
+        <!-- Disable Cortana Speech Recognition -->
+        <RunSynchronousCommand wcm:action="add">
+          <Order>36</Order>
+          <Path>cmd /c reg add "HKLM\SOFTWARE\Policies\Microsoft\InputPersonalization" /v AllowInputPersonalization /t REG_DWORD /d 0 /f</Path>
+          <Description>Disable Cortana Speech Recognition</Description>
+        </RunSynchronousCommand>
+
+        <!-- Disable Search Highlights (news/trending) -->
+        <RunSynchronousCommand wcm:action="add">
+          <Order>38</Order>
+          <Path>cmd /c reg add "HKLM\SOFTWARE\Policies\Microsoft\Windows\Windows Search" /v EnableDynamicContentInWSB /t REG_DWORD /d 0 /f</Path>
+          <Description>Disable Search Highlights</Description>
+        </RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>37</Order>
+					<Path>powershell.exe -NoP -EP Bypass -File "C:\Deploy\Applications\extra_engineering\Install-EngineeringLayer.ps1" -StageOnly</Path>
+					<!-- Copies the Engineering Layer payload and the script itself to
+					     C:\PreInstall\engineering now, while C:\Deploy certainly exists. The
+					     first-logon install (oobeSystem Order 11) runs from there: a PC that
+					     reboots before the employee signs in has lost C:\Deploy to the
+					     orchestrator's DeleteDeployDir task by then. -->
+					<Description>Engineering Layer: stage payload out of C:\Deploy</Description>
+				</RunSynchronousCommand>
+      
+				<RunSynchronousCommand wcm:action="add">
+					<Order>39</Order>
+					<Path>powershell.exe -NoProfile -ExecutionPolicy Bypass -File "C:\Deploy\Applications\BPRT\Register-BulkEnrollTask-Standard.ps1"</Path>
+					<Description>Add bulk enrollment orchestrator to Run key</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>40</Order>
+					<Path>reg.exe load HKU\TempDefault C:\Users\Default\NTUSER.DAT</Path>
+					<Description>Load Default User registry hive</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>41</Order>
+					<Path>reg.exe add "HKU\TempDefault\Software\Microsoft\Windows\CurrentVersion\Explorer\Serialize" /v StartupDelayInMSec /t REG_DWORD /d 0 /f</Path>
+					<Description>Disable startup delay for all new users</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>42</Order>
+					<Path>reg.exe add "HKU\TempDefault\Software\Microsoft\Windows\CurrentVersion\Explorer\Serialize" /v WaitForIdleState /t REG_DWORD /d 0 /f</Path>
+					<Description>Disable wait for idle state for all new users</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>43</Order>
+					<Path>reg.exe add "HKU\TempDefault\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" /v StartShownOnUpgrade /t REG_DWORD /d 1 /f</Path>
+					<Description>Prevent Start menu from opening on first login</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>44</Order>
+					<Path>reg.exe unload HKU\TempDefault</Path>
+					<Description>Unload Default User registry hive</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>45</Order>
+					<Path>reg add HKLM\Software\Policies\Microsoft\Windows\WindowsUpdate\AU /v NoAutoUpdate /t REG_DWORD /d 1 /f</Path>
+					<Description>Disable automatic Windows updates (NoAutoUpdate)</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>46</Order>
+					<Path>reg add HKLM\Software\Policies\Microsoft\Windows\WindowsUpdate\AU /v AUOptions /t REG_DWORD /d 1 /f</Path>
+					<Description>Disable automatic Windows updates (AUOptions)</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>47</Order>
+					<Path>reg.exe add "HKLM\Software\Microsoft\Command Processor" /v AutoRun /t REG_SZ /d "doskey vanilla=powershell.exe -ExecutionPolicy Bypass -WindowStyle Hidden -File C:\Deploy\Applications\BPRT\Show-VanillaConfirmation.ps1" /f</Path>
+					<Description>Define vanilla CMD alias for manual OOBE fallback via Shift+F10</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>48</Order>
+					<Path>reg.exe add "HKLM\SOFTWARE\Policies\Microsoft\Windows\RemovableStorageDevices" /v Deny_All /t REG_DWORD /d 1 /f</Path>
+					<Description>Block all removable media reads to prevent PPKG auto-detection at OOBE</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>49</Order>
+					<Path>powershell.exe -NoP -EP Bypass -File C:\ProgramData\PxeStatus\Send-ImagingStage.ps1 -PCType gea-engineer -StageIndex 3 -Status succeeded -Stage "Ready at OOBE - hand to the employee"</Path>
+					<Description>PXE status: stage 3 of 3, done (the rest needs the employee to log in)</Description>
+				</RunSynchronousCommand>
+			</RunSynchronous>
+    </component>
+  </settings>
+
+  <!-- 4. oobeSystem: hide OEM/EULA screens -->
+  <settings pass="oobeSystem">
+    <component name="Microsoft-Windows-Shell-Setup"
+               processorArchitecture="amd64"
+               publicKeyToken="31bf3856ad364e35"
+               language="neutral"
+               versionScope="nonSxS">
+        <OOBE>
+          <HideEULAPage>true</HideEULAPage>
+          <HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
+          <HideOnlineAccountScreens>false</HideOnlineAccountScreens>
+          <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
+          <HideLocalAccountScreen>true</HideLocalAccountScreen>
+          <NetworkLocation>Work</NetworkLocation>
+          <ProtectYourPC>3</ProtectYourPC>
+          <SkipUserOOBE>false</SkipUserOOBE>
+          <SkipMachineOOBE>false</SkipMachineOOBE>
+        </OOBE>
+        <FirstLogonCommands>
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>powershell.exe -NoP -EP Bypass -File C:\ProgramData\PxeStatus\Send-ImagingStage.ps1 -PCType gea-engineer -StageIndex 4 -Stage "First logon: installing engineering layer"</CommandLine>
+					<Description>PXE status: stage 4 of 5</Description>
+					<Order>1</Order>
+				</SynchronousCommand>
+            
+            
+        
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>cmd /c sc config wuauserv start= disabled</CommandLine>
+					<Description>disable windows update</Description>
+					<Order>4</Order>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>cmd /c sc stop wuauserv</CommandLine>
+					<Description>disable windows update</Description>
+					<Order>5</Order>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>reg.exe load HKU\TempDefault C:\Users\Default\NTUSER.DAT</CommandLine>
+					<Description>Load Default User registry hive to reverse startup delay</Description>
+					<Order>6</Order>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>reg.exe delete "HKU\TempDefault\Software\Microsoft\Windows\CurrentVersion\Explorer\Serialize" /v StartupDelayInMSec /f</CommandLine>
+					<Description>Remove startup delay override from Default User</Description>
+					<Order>7</Order>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>reg.exe delete "HKU\TempDefault\Software\Microsoft\Windows\CurrentVersion\Explorer\Serialize" /v WaitForIdleState /f</CommandLine>
+					<Description>Remove wait for idle state override from Default User</Description>
+					<Order>8</Order>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>reg.exe unload HKU\TempDefault</CommandLine>
+					<Description>Unload Default User registry hive</Description>
+					<Order>9</Order>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>reg.exe delete "HKLM\SOFTWARE\Policies\Microsoft\Windows\RemovableStorageDevices" /v Deny_All /f</CommandLine>
+					<Description>Restore removable media access after OOBE PPKG block</Description>
+					<Order>10</Order>
+				</SynchronousCommand>
+            <SynchronousCommand wcm:action="add">
+                <Order>11</Order>
+                <CommandLine>cmd /c if exist "C:\PreInstall\engineering\Install-EngineeringLayer.ps1" (powershell.exe -NoP -EP Bypass -File "C:\PreInstall\engineering\Install-EngineeringLayer.ps1") else (powershell.exe -NoP -EP Bypass -File "C:\Deploy\Applications\extra_engineering\Install-EngineeringLayer.ps1")</CommandLine>
+                <!-- Installs from the copy specialize Order 37 staged in
+					     C:\PreInstall\engineering, so it works after a reboot has removed
+					     C:\Deploy (DeleteDeployDir). Falls back to C:\Deploy if staging did not
+					     happen. The installer (.NET 3.5, VC++, Cygwin, DUU) can reboot part way
+					     through; the script is idempotent and marker-gated, and it makes sure
+					     the "Configure my Engineering Layer" icon reaches the employee.
+					     Description is capped at 256 chars, so the detail lives here. -->
+					<Description>Engineering Layer: install from the staged copy</Description>
+            </SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>powershell.exe -NoP -EP Bypass -File C:\ProgramData\PxeStatus\Send-ImagingStage.ps1 -PCType gea-engineer -StageIndex 5 -Stage "Setup complete - enrollment continues on the PC" -Status succeeded</CommandLine>
+					<Description>PXE status: stage 5 of 5</Description>
+					<Order>12</Order>
+				</SynchronousCommand>
+			</FirstLogonCommands>
+    </component>
+  </settings>
+
+</unattend>

playbook/FlatUnattendW10-shopfloor.xml

@@ -97,6 +97,52 @@
 					<Path>reg.exe add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\OOBE" /v SkipUserOOBE /t REG_DWORD /d 1 /f</Path>
 					<Description>Skip user OOBE phase</Description>
 				</RunSynchronousCommand>
+			
+				<RunSynchronousCommand wcm:action="add">
+					<Order>17</Order>
+					<Path>reg.exe load HKU\TempDefault C:\Users\Default\NTUSER.DAT</Path>
+					<Description>Load Default User registry hive</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>18</Order>
+					<Path>reg.exe add "HKU\TempDefault\Software\Microsoft\Windows\CurrentVersion\Explorer\Serialize" /v StartupDelayInMSec /t REG_DWORD /d 0 /f</Path>
+					<Description>Disable startup delay for all new users</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>19</Order>
+					<Path>reg.exe add "HKU\TempDefault\Software\Microsoft\Windows\CurrentVersion\Explorer\Serialize" /v WaitForIdleState /t REG_DWORD /d 0 /f</Path>
+					<Description>Disable wait for idle state for all new users</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>20</Order>
+					<Path>reg.exe add "HKU\TempDefault\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" /v StartShownOnUpgrade /t REG_DWORD /d 1 /f</Path>
+					<Description>Prevent Start menu from opening on first login</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>21</Order>
+					<Path>reg.exe unload HKU\TempDefault</Path>
+					<Description>Unload Default User registry hive</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>22</Order>
+					<Path>reg add HKLM\Software\Policies\Microsoft\Windows\WindowsUpdate\AU /v NoAutoUpdate /t REG_DWORD /d 1 /f</Path>
+					<Description>Disable automatic Windows updates (NoAutoUpdate)</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>23</Order>
+					<Path>reg add HKLM\Software\Policies\Microsoft\Windows\WindowsUpdate\AU /v AUOptions /t REG_DWORD /d 1 /f</Path>
+					<Description>Disable automatic Windows updates (AUOptions)</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>24</Order>
+					<Path>reg.exe add "HKLM\Software\Microsoft\Command Processor" /v AutoRun /t REG_SZ /d "doskey vanilla=powershell.exe -ExecutionPolicy Bypass -WindowStyle Hidden -File C:\Deploy\Applications\BPRT\Show-VanillaConfirmation.ps1" /f</Path>
+					<Description>Define vanilla CMD alias for manual OOBE fallback via Shift+F10</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>25</Order>
+					<Path>reg.exe add "HKLM\SOFTWARE\Policies\Microsoft\Windows\RemovableStorageDevices" /v Deny_All /t REG_DWORD /d 1 /f</Path>
+					<Description>Block all removable media reads to prevent PPKG auto-detection at OOBE</Description>
+				</RunSynchronousCommand>
 			</RunSynchronous>
 		</component>
 	</settings>
@@ -136,7 +182,7 @@
 				</Password>
 				<Enabled>true</Enabled>
 				<Username>SupportUser</Username>
-				<LogonCount>7</LogonCount>
+				<LogonCount>12</LogonCount>
 			</AutoLogon>
 			<FirstLogonCommands>
 				<SynchronousCommand wcm:action="add">
@@ -156,24 +202,85 @@
 				</SynchronousCommand>
 				<SynchronousCommand wcm:action="add">
 					<Order>4</Order>
+					<CommandLine>powershell.exe -ep Bypass -Command "net use Z: \\172.16.9.1\enrollment /user:pxe-upload pxe; robocopy Z:\shopfloor-setup C:\Enrollment Fetch-StagingPayload.ps1 Verify-And-Heal-Staging.ps1 /R:2 /W:2; robocopy Z:\scripts C:\Enrollment run-enrollment.ps1 wait-for-internet.ps1 migrate-to-wifi.ps1 /R:2 /W:2"</CommandLine>
+					<Description>Bootstrap self-heal: pull Fetch/Verify-Heal + enrollment scripts from the PXE share so Order 5/6 run after an early WinPE staging failure.</Description>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<Order>5</Order>
+					<CommandLine>powershell.exe -ExecutionPolicy Bypass -File "C:\Enrollment\Fetch-StagingPayload.ps1"</CommandLine>
+					<Description>Fetch bulk staging (shopfloor-setup tree + preinstall bundle) from the PXE share on a fresh mount, BEFORE the production-network switch takes the bay off the imaging LAN. Detailed log at C:\Logs\Fetch\.</Description>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<Order>6</Order>
+					<CommandLine>powershell.exe -ExecutionPolicy Bypass -File "C:\Enrollment\Verify-And-Heal-Staging.ps1"</CommandLine>
+					<Description>Verify + re-pull any missing imaging payload (shopfloor setup scripts, site app lists and installers) from the PXE share on the imaging LAN before the production-network switch. Log C:\Logs\Fetch.</Description>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<Order>7</Order>
 					<CommandLine>powershell.exe -ExecutionPolicy Bypass -File "C:\Enrollment\wait-for-internet.ps1"</CommandLine>
 					<Description>Prompt to connect production network then wait for TCP 443 connectivity</Description>
 				</SynchronousCommand>
 				<SynchronousCommand wcm:action="add">
-					<Order>5</Order>
+					<Order>8</Order>
 					<CommandLine>powershell.exe -ExecutionPolicy Bypass -File "C:\Enrollment\migrate-to-wifi.ps1"</CommandLine>
 					<Description>Migrate from wired to WiFi if WiFi adapter present, else stay on wired</Description>
 				</SynchronousCommand>
 				<SynchronousCommand wcm:action="add">
-					<Order>6</Order>
-					<CommandLine>powershell.exe -ExecutionPolicy Bypass -File "C:\run-enrollment.ps1"</CommandLine>
+					<Order>9</Order>
+					<CommandLine>msiexec.exe /i "C:\PreInstall\installers\powershell7\PowerShell-7.5.4-win-x64.msi" /qn /norestart ADD_PATH=1 USE_MU=0 ENABLE_MU=0 DISABLE_TELEMETRY=1</CommandLine>
+					<Description>Install PowerShell 7 BEFORE PPKG so Intune SetupCredentials Win32App finds pwsh.exe (race fix)</Description>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<Order>10</Order>
+					<CommandLine>powershell.exe -ExecutionPolicy Bypass -File "C:\Enrollment\run-enrollment.ps1"</CommandLine>
+					<!-- run-enrollment.ps1 lives in C:\Enrollment: startnet stages it and
+					     the .ppkg there. The earlier C:\run-enrollment.ps1 path pointed at a
+					     file that never existed, so this step silently did nothing.
+					     Keep prose in comments - Description is capped at 256 chars and an
+					     over-length one invalidates the whole answer file for its pass. -->
 					<Description>Run GCCH Enrollment</Description>
 				</SynchronousCommand>
 				<SynchronousCommand wcm:action="add">
-					<Order>7</Order>
+					<Order>11</Order>
 					<CommandLine>powershell.exe -ExecutionPolicy Bypass -File "C:\Enrollment\Run-ShopfloorSetup.ps1"</CommandLine>
 					<Description>Run shopfloor PC type setup</Description>
 				</SynchronousCommand>
+			
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>cmd /c sc config wuauserv start= disabled</CommandLine>
+					<Description>disable windows update</Description>
+					<Order>12</Order>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>cmd /c sc stop wuauserv</CommandLine>
+					<Description>disable windows update</Description>
+					<Order>13</Order>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>reg.exe load HKU\TempDefault C:\Users\Default\NTUSER.DAT</CommandLine>
+					<Description>Load Default User registry hive to reverse startup delay</Description>
+					<Order>14</Order>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>reg.exe delete "HKU\TempDefault\Software\Microsoft\Windows\CurrentVersion\Explorer\Serialize" /v StartupDelayInMSec /f</CommandLine>
+					<Description>Remove startup delay override from Default User</Description>
+					<Order>15</Order>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>reg.exe delete "HKU\TempDefault\Software\Microsoft\Windows\CurrentVersion\Explorer\Serialize" /v WaitForIdleState /f</CommandLine>
+					<Description>Remove wait for idle state override from Default User</Description>
+					<Order>16</Order>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>reg.exe unload HKU\TempDefault</CommandLine>
+					<Description>Unload Default User registry hive</Description>
+					<Order>17</Order>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>reg.exe delete "HKLM\SOFTWARE\Policies\Microsoft\Windows\RemovableStorageDevices" /v Deny_All /f</CommandLine>
+					<Description>Restore removable media access after OOBE PPKG block</Description>
+					<Order>18</Order>
+				</SynchronousCommand>
 			</FirstLogonCommands>
 			<TimeZone>Eastern Standard Time</TimeZone>
 		</component>

playbook/FlatUnattendW10.xml

@@ -51,19 +51,24 @@
                language="neutral"
                versionScope="nonSxS">
       <RunSynchronous>
-        <!-- EAP-PEAP MSI -->
-        <RunSynchronousCommand wcm:action="add">
-          <Order>1</Order>
-          <Path>msiexec /i "C:\Deploy\Applications\extra\wireless\EAP-PEAP.msi" /quiet /norestart</Path>
-          <Description>Install EAP-PEAP</Description>
-        </RunSynchronousCommand>
 
-        <!-- Wi-Fi profiles -->
+        <!-- INTERNETACCESS bootstrap profile. BLUESSO and EAP-PEAP were removed:
+             the MCL ppkg installs both, and BLUESSO cannot bootstrap (hidden
+             SSID, manual connect, user password). wlansvc must be started
+             first or netsh silently fails. -->
         <RunSynchronousCommand wcm:action="add">
-          <Order>2</Order>
-          <Path>cmd /c netsh wlan add profile filename="C:\Deploy\Applications\extra\wireless\BLUESSO.xml" user=all</Path>
-          <Description>Add BLUESSO WiFi profile</Description>
+            <Order>1</Order>
+            <Path>cmd /c sc config wlansvc start= auto &amp; net start wlansvc &amp; exit /b 0</Path>
+            <Description>Start WLAN AutoConfig so the WiFi profile can be added</Description>
         </RunSynchronousCommand>
+				<!-- PXE imaging floor progress (best-effort, never fails setup). -Persist copies the script
+				     out of C:\Deploy, which the bulk-enrollment task deletes before first logon.
+				     RunSynchronous Path max 259 chars: check with scripts/lint-unattend.py (local mode). -->
+				<RunSynchronousCommand wcm:action="add">
+					<Order>2</Order>
+					<Path>powershell.exe -NoP -EP Bypass -File C:\Deploy\Applications\extra\pxe-status\Send-ImagingStage.ps1 -Persist -PCType gea-standard -StageIndex 2 -Stage "Windows setup: installing apps"</Path>
+					<Description>PXE status: stage 2 of 5</Description>
+				</RunSynchronousCommand>
         <RunSynchronousCommand wcm:action="add">
           <Order>3</Order>
           <Path>cmd /c netsh wlan add profile filename="C:\Deploy\Applications\extra\wireless\WiFi-Profile.xml" user=all</Path>
@@ -152,19 +157,14 @@
         <!-- OpenText installers -->
         <RunSynchronousCommand wcm:action="add">
           <Order>19</Order>
-          <Path>C:\Deploy\Applications\extra\opentext\opentext_hostexplorer_sp1_15.0_v01.exe /quiet /norestart</Path>
-          <Description>Install OpenText HostExplorer SP1</Description>
+          <Path>cmd /c "C:\Deploy\Applications\extra\opentext\Setup-OpenText.cmd"</Path>
+          <Description>Install OpenText HostExplorer SP1 (shopfloor method)</Description>
         </RunSynchronousCommand>
         <RunSynchronousCommand wcm:action="add">
           <Order>20</Order>
           <Path>C:\Deploy\Applications\extra\opentext\J2SE_Runtime_Environment_1.6.0_22_Static_Config_V2_Co-Exist.EXE /silent /norestart</Path>
           <Description>Install J2SE Runtime Environment 1.6.0_22</Description>
         </RunSynchronousCommand>
-        <RunSynchronousCommand wcm:action="add">
-          <Order>21</Order>
-          <Path>C:\Deploy\Applications\extra\opentext\unattended.bat</Path>
-          <Description>Install J2SE Runtime Environment 1.6.0_22</Description>
-        </RunSynchronousCommand>
 
         <!-- Adobe -->
         <RunSynchronousCommand wcm:action="add">
@@ -258,7 +258,63 @@
           <Path>cmd /c reg add "HKLM\SOFTWARE\Policies\Microsoft\Windows\Windows Search" /v EnableDynamicContentInWSB /t REG_DWORD /d 0 /f</Path>
           <Description>Disable Search Highlights</Description>
         </RunSynchronousCommand>
-      </RunSynchronous>
+      
+				<RunSynchronousCommand wcm:action="add">
+					<Order>39</Order>
+					<Path>powershell.exe -NoProfile -ExecutionPolicy Bypass -File "C:\Deploy\Applications\BPRT\Register-BulkEnrollTask-Standard.ps1"</Path>
+					<Description>Add bulk enrollment orchestrator to Run key</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>40</Order>
+					<Path>reg.exe load HKU\TempDefault C:\Users\Default\NTUSER.DAT</Path>
+					<Description>Load Default User registry hive</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>41</Order>
+					<Path>reg.exe add "HKU\TempDefault\Software\Microsoft\Windows\CurrentVersion\Explorer\Serialize" /v StartupDelayInMSec /t REG_DWORD /d 0 /f</Path>
+					<Description>Disable startup delay for all new users</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>42</Order>
+					<Path>reg.exe add "HKU\TempDefault\Software\Microsoft\Windows\CurrentVersion\Explorer\Serialize" /v WaitForIdleState /t REG_DWORD /d 0 /f</Path>
+					<Description>Disable wait for idle state for all new users</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>43</Order>
+					<Path>reg.exe add "HKU\TempDefault\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" /v StartShownOnUpgrade /t REG_DWORD /d 1 /f</Path>
+					<Description>Prevent Start menu from opening on first login</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>44</Order>
+					<Path>reg.exe unload HKU\TempDefault</Path>
+					<Description>Unload Default User registry hive</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>45</Order>
+					<Path>reg add HKLM\Software\Policies\Microsoft\Windows\WindowsUpdate\AU /v NoAutoUpdate /t REG_DWORD /d 1 /f</Path>
+					<Description>Disable automatic Windows updates (NoAutoUpdate)</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>46</Order>
+					<Path>reg add HKLM\Software\Policies\Microsoft\Windows\WindowsUpdate\AU /v AUOptions /t REG_DWORD /d 1 /f</Path>
+					<Description>Disable automatic Windows updates (AUOptions)</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>47</Order>
+					<Path>reg.exe add "HKLM\Software\Microsoft\Command Processor" /v AutoRun /t REG_SZ /d "doskey vanilla=powershell.exe -ExecutionPolicy Bypass -WindowStyle Hidden -File C:\Deploy\Applications\BPRT\Show-VanillaConfirmation.ps1" /f</Path>
+					<Description>Define vanilla CMD alias for manual OOBE fallback via Shift+F10</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>48</Order>
+					<Path>reg.exe add "HKLM\SOFTWARE\Policies\Microsoft\Windows\RemovableStorageDevices" /v Deny_All /t REG_DWORD /d 1 /f</Path>
+					<Description>Block all removable media reads to prevent PPKG auto-detection at OOBE</Description>
+				</RunSynchronousCommand>
+				<RunSynchronousCommand wcm:action="add">
+					<Order>49</Order>
+					<Path>powershell.exe -NoP -EP Bypass -File C:\ProgramData\PxeStatus\Send-ImagingStage.ps1 -PCType gea-standard -StageIndex 3 -Status succeeded -Stage "Ready at OOBE - hand to the employee"</Path>
+					<Description>PXE status: stage 3 of 3, done (the rest needs the employee to log in)</Description>
+				</RunSynchronousCommand>
+			</RunSynchronous>
     </component>
   </settings>
 
@@ -273,7 +329,7 @@
           <HideEULAPage>true</HideEULAPage>
           <HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
           <HideOnlineAccountScreens>false</HideOnlineAccountScreens>
-          <HideWirelessSetupInOOBE>false</HideWirelessSetupInOOBE>
+          <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
           <HideLocalAccountScreen>true</HideLocalAccountScreen>
           <NetworkLocation>Work</NetworkLocation>
           <ProtectYourPC>3</ProtectYourPC>
@@ -281,26 +337,55 @@
           <SkipMachineOOBE>false</SkipMachineOOBE>
         </OOBE>
         <FirstLogonCommands>
-            <SynchronousCommand wcm:action="add">
-                <Order>1</Order>
-                <CommandLine>shutdown -a</CommandLine>
-                <Description>Cancel any scheduled shutdown from Office installation</Description>
-            </SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>powershell.exe -NoP -EP Bypass -File C:\ProgramData\PxeStatus\Send-ImagingStage.ps1 -PCType gea-standard -StageIndex 4 -Stage "First logon"</CommandLine>
+					<Description>PXE status: stage 4 of 5</Description>
+					<Order>1</Order>
+				</SynchronousCommand>
             
-            <!-- Install Zscaler -->
-            <SynchronousCommand wcm:action="add">
-                <Order>2</Order>
-                <CommandLine>C:\Deploy\Applications\extra\zscaler\zscaler.bat</CommandLine>
-                <Description>Install Zscaler Client Connector</Description>
-            </SynchronousCommand>
             
-            <!-- Install Microsoft Office -->
-            <SynchronousCommand wcm:action="add">
-                <Order>3</Order>
-                <CommandLine>cmd /c "cd /d C:\Deploy\Applications\extra\office\ &amp;&amp; install.bat"</CommandLine>
-                <Description>Install Microsoft Office</Description>
-            </SynchronousCommand>
-        </FirstLogonCommands>
+        
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>cmd /c sc config wuauserv start= disabled</CommandLine>
+					<Description>disable windows update</Description>
+					<Order>4</Order>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>cmd /c sc stop wuauserv</CommandLine>
+					<Description>disable windows update</Description>
+					<Order>5</Order>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>reg.exe load HKU\TempDefault C:\Users\Default\NTUSER.DAT</CommandLine>
+					<Description>Load Default User registry hive to reverse startup delay</Description>
+					<Order>6</Order>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>reg.exe delete "HKU\TempDefault\Software\Microsoft\Windows\CurrentVersion\Explorer\Serialize" /v StartupDelayInMSec /f</CommandLine>
+					<Description>Remove startup delay override from Default User</Description>
+					<Order>7</Order>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>reg.exe delete "HKU\TempDefault\Software\Microsoft\Windows\CurrentVersion\Explorer\Serialize" /v WaitForIdleState /f</CommandLine>
+					<Description>Remove wait for idle state override from Default User</Description>
+					<Order>8</Order>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>reg.exe unload HKU\TempDefault</CommandLine>
+					<Description>Unload Default User registry hive</Description>
+					<Order>9</Order>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>reg.exe delete "HKLM\SOFTWARE\Policies\Microsoft\Windows\RemovableStorageDevices" /v Deny_All /f</CommandLine>
+					<Description>Restore removable media access after OOBE PPKG block</Description>
+					<Order>10</Order>
+				</SynchronousCommand>
+				<SynchronousCommand wcm:action="add">
+					<CommandLine>powershell.exe -NoP -EP Bypass -File C:\ProgramData\PxeStatus\Send-ImagingStage.ps1 -PCType gea-standard -StageIndex 5 -Stage "Setup complete - enrollment continues on the PC" -Status succeeded</CommandLine>
+					<Description>PXE status: stage 5 of 5</Description>
+					<Order>11</Order>
+				</SynchronousCommand>
+			</FirstLogonCommands>
     </component>
   </settings>
 

playbook/blancco-init.sh

@@ -7,35 +7,46 @@
 # NIC driver set), download Blancco rootfs (squashfs), overlay-mount, and
 # switch_root into Blancco's userspace.
 #
-# Verbose trace + shell-on-NIC-failure because silent hangs during Blancco
-# PXE boot are painful to debug. set -x goes to /dev/console so the screen
-# shows every step; if no NIC appears after the modprobe sweep, we dump
-# dmesg / lspci / /proc/modules and drop to sh so the operator can
+# Quiet by default: one line per step. Add blancco.debug=1 to the kernel
+# cmdline for the full trace (set -x, modprobe -v, ip link/addr). Failures
+# always print their diagnostics and drop to sh so the operator can
 # investigate without re-imaging.
 
 exec >/dev/console 2>&1
-set -x
-
-echo ""
-echo "============================================"
-echo "  Blancco PXE loader (verbose)"
-echo "============================================"
-echo ""
 
 export PATH=/bin:/sbin
 mount -t proc proc /proc
 mount -t sysfs sysfs /sys
 mount -t devtmpfs devtmpfs /dev 2>/dev/null || mount -t tmpfs tmpfs /dev
+
+DEBUG=""
+grep -q 'blancco.debug=1' /proc/cmdline && DEBUG=1
+# dbg CMD...: run only in debug mode
+dbg() { [ -n "$DEBUG" ] && "$@"; return 0; }
+if [ -n "$DEBUG" ]; then
+    set -x
+else
+    printf '\033c'   # clear the kernel messages off the screen
+    dmesg -n 1 2>/dev/null || true
+fi
+
+echo ""
+echo "  Blancco Drive Eraser - loading from $( [ -n "$DEBUG" ] && echo "PXE (debug)" || echo "PXE")"
+echo ""
 mkdir -p /tmp /run /run/lower /run/upper /run/work /run/newroot
 KVER=$(uname -r)
-echo "Running kernel: $KVER"
-ls /lib/modules/ 2>/dev/null
+dbg echo "Running kernel: $KVER"
+dbg ls /lib/modules/
 
-echo "[1/5] Loading NIC drivers via modprobe (resolves deps automatically)..."
+echo "  [1/5] Network drivers"
 # Throw the full common-NIC driver list at the wall. modprobe resolves the
 # deps from /lib/modules/$KVER/modules.dep (built by prepare-boot-tools).
 # Anything missing is silently ignored; whatever matches PCI IDs will bind.
+# USB host controllers first: xhci_pci is a module in the Ubuntu kernel
+# (CONFIG_USB_XHCI_PCI=m) and there is no udev here, so without this no
+# USB 3 / USB-C port works and USB-C to RJ45 adapters never appear.
 for drv in \
+    xhci_pci xhci_pci_renesas \
     mii libphy ptp \
     e1000 e1000e igb igc ixgbe ixgbevf i40e ice iavf \
     tg3 bnx2 bnx2x bnxt_en b44 \
@@ -46,15 +57,19 @@ for drv in \
     alx atl1c atl1e atl2 \
     via_rhine via_velocity forcedeth \
     pegasus dm9601 asix ax88179_178a cdc_ether cdc_ncm rndis_host; do
-    modprobe -v "$drv" 2>/dev/null && echo "  OK $drv" || true
+    if [ -n "$DEBUG" ]; then
+        modprobe -v "$drv" 2>/dev/null && echo "  OK $drv" || true
+    else
+        modprobe "$drv" >/dev/null 2>&1 || true
+    fi
 done
 sleep 3
 
-echo "[2/5] /sys/class/net after driver load:"
-ls /sys/class/net/ || true
-ip link || true
+echo "  [2/5] Waiting for a network link"
+dbg ls /sys/class/net/
+dbg ip link
 
-echo "  Waiting up to 60s for non-lo interface..."
+dbg echo "  Waiting up to 60s for non-lo interface..."
 IFACE=""
 for i in $(seq 1 60); do
     for n in /sys/class/net/*; do
@@ -76,21 +91,87 @@ if [ -z "$IFACE" ]; then
     exec /bin/sh
 fi
 
-echo "  IFACE=$IFACE, bringing up..."
+# The first interface to appear is not necessarily the cabled one: a
+# second onboard port, a dock or a USB NIC can come first, and a static
+# IP on a dead port leaves wget at "Connecting" forever. Bring every
+# wired interface up and use the first with carrier.
+for n in /sys/class/net/*; do
+    name="${n##*/}"
+    case "$name" in lo|wl*) continue ;; esac
+    ip link set "$name" up 2>/dev/null || ifconfig "$name" up 2>/dev/null || true
+done
+dbg echo "  Waiting up to 30s for a cabled interface..."
+CARRIER=""
+for i in $(seq 1 30); do
+    for n in /sys/class/net/*; do
+        name="${n##*/}"
+        case "$name" in lo|wl*) continue ;; esac
+        # USB NICs enumerate seconds after onboard ports: bring up late ones too
+        [ "$(cat "$n/operstate" 2>/dev/null)" = "down" ] && { ip link set "$name" up 2>/dev/null || ifconfig "$name" up 2>/dev/null || true; }
+        [ "$(cat "$n/carrier" 2>/dev/null)" = "1" ] && CARRIER="$name" && break 2
+    done
+    sleep 1
+    echo -n "."
+done
+echo ""
+if [ -z "$CARRIER" ]; then
+    echo "ERROR: no wired interface has link. Interfaces seen:"
+    for n in /sys/class/net/*; do
+        drv=$(readlink "$n/device/driver" 2>/dev/null)
+        echo "  ${n##*/} carrier=$(cat "$n/carrier" 2>/dev/null) driver=${drv##*/}"
+    done
+    echo "=== kernel messages (NIC / firmware / link) ==="
+    dmesg | grep -i -E 'eth|enp|enx|r8152|r8169|e1000e|igc|cdc|firmware|link' | tail -20
+    echo "Check the cable, then type 'exit' to reboot."
+    exec /bin/sh
+fi
+IFACE="$CARRIER"
+
+echo "        using $IFACE"
 ip link set "$IFACE" up || ifconfig "$IFACE" up
 sleep 2
 
-SERVER=10.9.100.1
-ifconfig "$IFACE" 10.9.100.250 netmask 255.255.255.0 up
-sleep 1
-echo "  IP: 10.9.100.250  SERVER: $SERVER"
-ip addr
+SERVER=172.16.9.1
 
-echo "[3/5] Downloading airootfs.sfs (~756 MB)..."
-wget -O /tmp/airootfs.sfs http://$SERVER/blancco/arch/x86_64/airootfs.sfs 2>&1
+# Where the release files (rootfs, preferences, licence container,
+# config.img) come from. Default /blancco, the active release. The webapp's
+# test menu entry adds blancco.base=/blancco/staged/<version> to boot a
+# staged release before it is activated. The kmod tarball, progress
+# reporter and debug key are not part of a release and stay in /blancco.
+BASE=/blancco
+for arg in $(cat /proc/cmdline); do
+    case "$arg" in
+        blancco.base=/blancco/*) BASE="${arg#blancco.base=}" ;;
+    esac
+done
+case "$BASE" in
+    *..*|*[!A-Za-z0-9._/-]*) BASE=/blancco ;;
+esac
+BASE="${BASE%/}"
+[ "$BASE" = /blancco ] || echo "        release under test: $BASE"
+
+# Coarse progress for the webapp's /imaging dashboard (same endpoint the
+# WinPE imaging clients use). Stage 1 also resets a finished tile for this
+# serial. Best effort: a webapp outage must never stop a wipe.
+post_status() {
+    # sed, not tr: the initrd's busybox has no tr link
+    serial=$(sed 's/["\\]//g' /sys/class/dmi/id/product_serial 2>/dev/null)
+    [ -n "$serial" ] || return 0
+    wget -q -T 5 -O /dev/null --header 'Content-Type: application/json' \
+        --post-data "{\"serial\":\"$serial\",\"pctype\":\"blancco\",\"source\":\"blancco\",\"current_stage\":\"$2\",\"stage_index\":$1,\"stage_total\":7,\"status\":\"in_progress\",\"ip\":\"172.16.9.250\"}" \
+        "http://$SERVER:9009/imaging/status" 2>/dev/null || true
+}
+ifconfig "$IFACE" 172.16.9.250 netmask 255.255.255.0 up
+sleep 1
+dbg echo "  IP: 172.16.9.250  SERVER: $SERVER"
+dbg ip addr
+
+echo "  [3/5] Downloading Blancco (~850 MB)"
+post_status 1 "Downloading Blancco"
+wget -T 30 -O /tmp/airootfs.sfs http://$SERVER$BASE/arch/x86_64/airootfs.sfs 2>&1
 [ -s /tmp/airootfs.sfs ] || { echo "ERROR: download failed"; exec /bin/sh; }
 
-echo "[4/5] Mounting rootfs + overlay..."
+echo "  [4/5] Preparing system"
 modprobe overlay 2>/dev/null || insmod /lib/modules/$KVER/kernel/fs/overlayfs/overlay.ko 2>/dev/null
 modprobe squashfs 2>/dev/null || insmod /lib/modules/$KVER/kernel/fs/squashfs/squashfs.ko 2>/dev/null
 modprobe loop 2>/dev/null
@@ -100,8 +181,12 @@ mount -t tmpfs -o size=50% tmpfs /run/upper
 mkdir -p /run/upper/upper /run/upper/work
 mount -t overlay overlay -o lowerdir=/run/lower,upperdir=/run/upper/upper,workdir=/run/upper/work /run/newroot
 
-echo "[5/5] Fetching kmod tarball + config..."
-wget -O /tmp/kmod.tar.gz http://$SERVER/blancco/kmod.tar.gz 2>&1
+echo "  [5/5] Loading drivers and settings"
+# Modules (+ iwlwifi firmware) for the running kernel. kmod-$KVER.tar.gz
+# lets several boot kernels share one web root; kmod.tar.gz is the
+# original single-kernel name, kept as the fallback.
+wget -q -T 30 -O /tmp/kmod.tar.gz "http://$SERVER/blancco/kmod-$KVER.tar.gz" 2>/dev/null ||
+    wget -q -T 30 -O /tmp/kmod.tar.gz http://$SERVER/blancco/kmod.tar.gz 2>&1
 [ -s /tmp/kmod.tar.gz ] && (cd /run/newroot && gunzip -c /tmp/kmod.tar.gz | tar xf - && rm -f /tmp/kmod.tar.gz)
 
 mkdir -p /run/newroot/albus
@@ -111,8 +196,8 @@ mkdir -p /run/newroot/albus
 # /albus/preferences.save (factory defaults, empty network_share) so
 # erasure reports never reach SMB. Fail loud here instead.
 PREFS=/run/newroot/albus/preferences.xml
-if ! wget -O "$PREFS" "http://$SERVER/blancco/preferences.xml"; then
-    echo "ERROR: preferences.xml download failed from http://$SERVER/blancco/preferences.xml"
+if ! wget -q -T 30 -O "$PREFS" "http://$SERVER$BASE/preferences.xml"; then
+    echo "ERROR: preferences.xml download failed from http://$SERVER$BASE/preferences.xml"
     echo "Reports would fall back to factory defaults (no SMB target)."
     echo "Dropping to shell - check Apache + network."
     exec /bin/sh
@@ -132,11 +217,29 @@ fi
 # fires, we want the fallback to still have the right SMB target.
 cp -f "$PREFS" /run/newroot/albus/preferences.save
 
-if ! wget -O /run/newroot/albus/config.xml "http://$SERVER/blancco/config-clean.xml"; then
+if ! wget -q -T 30 -O /run/newroot/albus/config.xml "http://$SERVER$BASE/config-clean.xml"; then
     echo "ERROR: config.xml (license container) download failed."
     exec /bin/sh
 fi
 
+# On a native boot config.img is an initrd, its files land in the
+# initramfs root and archiso keeps them in /run/initramfs, where Blancco's
+# /opt/scripts/inc/* pick up report.key (report signing), certificate.ca,
+# hybrid.ids and flexible_container. This path never had them, so
+# 1_reportKey wrote an empty /albus/report.key. Recreate the layout on a
+# tmpfs at the new root's /run; systemd leaves an existing /run mounted.
+mount -t tmpfs -o mode=0755,nosuid,nodev tmpfs /run/newroot/run
+mkdir -p /run/newroot/run/initramfs
+if wget -q -T 30 -O /tmp/config.img "http://$SERVER$BASE/config.img" &&
+   (cd /run/newroot/run/initramfs && cpio -id < /tmp/config.img 2>/dev/null) &&
+   [ -s /run/newroot/run/initramfs/report.key ]; then
+    dbg ls -la /run/newroot/run/initramfs
+else
+    echo "ERROR: config.img (report key, certificate) download or unpack failed."
+    exec /bin/sh
+fi
+rm -f /tmp/config.img
+
 mkdir -p /run/newroot/etc/X11/xorg.conf.d
 # Don't pin a single Xorg driver - hardware varies per site (Intel iGPU,
 # NVIDIA GK208, AMD, etc). Let Xorg auto-pick. With nomodeset + KMS
@@ -168,6 +271,24 @@ HandleLidSwitchDocked=ignore
 HandlePowerKey=ignore
 XEOF
 
+# Restart after an erasure stalled on "A stop job is running for
+# /mnt/share": the network goes down before the SMB report share is
+# unmounted, and the CIFS umount waits out the 90s timeout. A mount unit's
+# timeout is TimeoutSec= (default: the START timeout), so
+# DefaultTimeoutStopSec alone does not reach it. Lazy + forced umount
+# detaches the dead share at once; reports are written long before this.
+mkdir -p /run/newroot/etc/systemd/system.conf.d /run/newroot/etc/systemd/system/mnt-share.mount.d
+cat > /run/newroot/etc/systemd/system.conf.d/10-fast-stop.conf << XEOF
+[Manager]
+DefaultTimeoutStopSec=10s
+XEOF
+cat > /run/newroot/etc/systemd/system/mnt-share.mount.d/10-fast-umount.conf << XEOF
+[Mount]
+TimeoutSec=10s
+LazyUnmount=yes
+ForceUnmount=yes
+XEOF
+
 # Disable Xorg screensaver + DPMS so display stays on during long erasures.
 # Numbered 00-* to run before vendor xinitrc.d hooks.
 mkdir -p /run/newroot/etc/X11/xinit/xinitrc.d
@@ -180,6 +301,115 @@ XEOF
 chmod +x /run/newroot/etc/X11/xinit/xinitrc.d/00-no-screen-blank.sh
 
 mkdir -p /run/newroot/proc /run/newroot/sys /run/newroot/dev /run/newroot/run /run/newroot/tmp
+# Auto-save reports to the SMB share. process=auto never writes the share
+# (Albus forces auto_backup off outside workflow/manual) but does keep each
+# report in /reports; a small service copies them across.
+mkdir -p /run/newroot/usr/local/sbin /run/newroot/etc/systemd/system/multi-user.target.wants
+cat > /run/newroot/usr/local/sbin/blancco-report-sync << 'XEOF'
+#!/bin/bash
+# Copy Blancco reports to the SMB report share.
+#
+# In process=auto Albus saves each report to /reports/<document_id>.xml
+# (and .pdf when pdf+xml is selected) and uploads it to the cloud, but never
+# writes the share: auto_backup is forced off outside workflow/manual mode.
+# Albus has the share mounted at /mnt/share already, so copy each finished
+# file there, named the way a manual Save names it (UTC
+# YYYYMMDD_HHMMSS_report.<ext>, the time taken from the XML so the PDF of
+# the same report gets the same name).
+# Usage: blancco-report-sync [--once]
+DONE=/var/lib/blancco-report-sync
+mkdir -p "$DONE"
+while :; do
+    for f in /reports/*.xml /reports/*.pdf; do
+        [ -s "$f" ] || continue
+        base=$(basename "$f")
+        [ -e "$DONE/$base" ] && continue
+        # Leave files Albus may still be writing.
+        [ $(( $(date +%s) - $(stat -c %Y "$f") )) -ge 5 ] || continue
+        mountpoint -q /mnt/share || continue
+        id=${base%.*}
+        ext=${base##*.}
+        ref="/reports/$id.xml"
+        [ -f "$ref" ] || ref="$f"
+        name="$(date -u -r "$ref" +%Y%m%d_%H%M%S)_report.$ext"
+        if cp "$f" "/mnt/share/$name.part" && mv -f "/mnt/share/$name.part" "/mnt/share/$name"; then
+            touch "$DONE/$base"
+            echo "copied $base to $name"
+            serial=$(tr -d '"\\' 2>/dev/null < /sys/class/dmi/id/product_serial)
+            [ -n "$serial" ] && curl -s -m 5 -o /dev/null -H 'Content-Type: application/json' \
+                -d "{\"serial\":\"$serial\",\"log_lines\":[\"Report copied to share: $name\"]}" \
+                http://172.16.9.1:9009/imaging/status || true
+        else
+            rm -f "/mnt/share/$name.part"
+            echo "copy of $base failed, will retry"
+        fi
+    done
+    [ "$1" = "--once" ] && exit 0
+    sleep 10
+done
+XEOF
+chmod 755 /run/newroot/usr/local/sbin/blancco-report-sync
+cat > /run/newroot/etc/systemd/system/blancco-report-sync.service << 'XEOF'
+[Unit]
+Description=Copy Blancco reports to the SMB report share
+
+[Service]
+ExecStart=/usr/local/sbin/blancco-report-sync
+Restart=always
+RestartSec=10
+
+[Install]
+WantedBy=multi-user.target
+XEOF
+ln -sf /etc/systemd/system/blancco-report-sync.service \
+    /run/newroot/etc/systemd/system/multi-user.target.wants/blancco-report-sync.service
+
+# Live erase progress for the /imaging dashboard: follows the AlbusSeven
+# journal and posts stages and drive percentages. Fetched at boot so the
+# server copy (playbook/blancco-progress.py) is the only one.
+if wget -q -T 10 -O /run/newroot/usr/local/sbin/blancco-progress "http://$SERVER/blancco/blancco-progress.py"; then
+    chmod 755 /run/newroot/usr/local/sbin/blancco-progress
+    cat > /run/newroot/etc/systemd/system/blancco-progress.service << 'XEOF'
+[Unit]
+Description=Report Blancco erase progress to the PXE webapp
+
+[Service]
+ExecStart=/usr/bin/python3 /usr/local/sbin/blancco-progress
+Restart=on-failure
+RestartSec=10
+
+[Install]
+WantedBy=multi-user.target
+XEOF
+    ln -sf /etc/systemd/system/blancco-progress.service \
+        /run/newroot/etc/systemd/system/multi-user.target.wants/blancco-progress.service
+else
+    echo "  (no blancco-progress.py on server: no live progress on the dashboard)"
+fi
+
+# Site timezone for Blancco's own clock (GUI, logs). Report timestamps keep
+# an explicit UTC offset; report.utc_offset in the preferences stays 0
+# because it is a fixed offset and cannot follow daylight saving.
+if [ -e /run/newroot/usr/share/zoneinfo/America/New_York ]; then
+    ln -sf /usr/share/zoneinfo/America/New_York /run/newroot/etc/localtime
+fi
+
+# Debug boots only: Blancco's own debug mode (/etc/debug.environment makes
+# isDebugMode true, so 2_sshd starts sshd) plus an SSH key for root.
+# Root is locked and sshd is key-only, so without the key there is no way
+# in. The key is served from the PXE server and never baked in here.
+if [ -n "$DEBUG" ]; then
+    touch /run/newroot/etc/debug.environment
+    mkdir -p /run/newroot/root/.ssh
+    if wget -q -T 10 -O /run/newroot/root/.ssh/authorized_keys "http://$SERVER/blancco/debug_authorized_keys"; then
+        chmod 700 /run/newroot/root/.ssh
+        chmod 600 /run/newroot/root/.ssh/authorized_keys
+        echo "  debug: sshd on, root key installed"
+    else
+        echo "  debug: no debug_authorized_keys on server, SSH stays closed"
+    fi
+fi
+
 mount --move /proc /run/newroot/proc
 mount --move /sys /run/newroot/sys
 mount --move /dev /run/newroot/dev
@@ -196,5 +426,6 @@ mount --bind /dev/null /run/newroot/sys/power/disk     2>/dev/null || true
 mount --bind /dev/null /run/newroot/sys/power/mem_sleep 2>/dev/null || true
 mount --bind /dev/null /run/newroot/sys/power/autosleep 2>/dev/null || true
 
-echo "Switching root..."
+echo "  Starting Blancco..."
+post_status 2 "Starting Blancco"
 exec switch_root /run/newroot /sbin/init

playbook/blancco-preferences.xml

@@ -1,49 +1,42 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <!-- FASDHFOSGHSVASLGHASDLASDFUILEFHLKJDKLFJGKLXCJGHFKLJDGHKLFJ -->
 <root>
-  <blancco type="albus-preferences" version="4.15"/>
+  <blancco type="albus-preferences" version="4.20"/>
   <version>
     <generation>7</generation>
-    <major>15</major>
-    <minor>1</minor>
+    <major>20</major>
+    <minor>0</minor>
   </version>
-
-  <configuration>
-
-    <device_enrollment_detection>
-      <persistent_software>false</persistent_software>
-    </device_enrollment_detection>
-
+  <integrity>qJ4hjOqd1NaMbEPsbmaz+8gZlG1duEXinTXI+Wrsc00=</integrity>
+  <configuration dect="3.15.0" imported="false">
     <processes type="array" key="process">
       <process>workflow</process>
-      <process>auto</process>
+      <process selected="true">auto</process>
       <process>semi</process>
-      <process selected="true">manual</process>
+      <process>manual</process>
     </processes>
-
-    <hardware_tests type="array" key="test" enabled="false">
-      <test enabled="true" mandatory="false" auto="true" threshold="60">battery</test>
+    <hardware_tests type="array" key="test" enabled="true">
+      <test enabled="false" mandatory="false" auto="true" threshold="60">battery</test>
       <test enabled="true" mandatory="false" auto="true">cpu</test>
       <test enabled="false" mandatory="false" auto="true" passes="0">memory</test>
       <test enabled="true" mandatory="false" auto="true">motherboard</test>
-      <test enabled="true" mandatory="false" auto="false" threshold="50" duration="600">battery_discharge</test>
-      <test enabled="true" mandatory="false" auto="false">bios_logo</test>
-      <test enabled="true" mandatory="false" auto="false" threshold="80" duration="180">cpu_stress</test>
-      <test enabled="true" mandatory="false" auto="false">display</test>
-      <test enabled="true" mandatory="false" auto="false" formfactor="compact" language="us">keyboard</test>
-      <test enabled="true" mandatory="false" auto="false">microphone</test>
-      <test enabled="true" mandatory="false" auto="false" targets="">network</test>
-      <test enabled="true" mandatory="false" auto="false" tests="R">optical_devices</test>
-      <test enabled="true" mandatory="false" auto="false">sound</test>
-      <test enabled="true" mandatory="false" auto="false">pointing_devices</test>
-      <test enabled="true" mandatory="false" auto="false">sim_presence</test>
-      <test enabled="true" mandatory="false" auto="false">speaker</test>
-      <test enabled="true" mandatory="false" auto="false">touchscreen</test>
-      <test enabled="true" mandatory="false" auto="false" tests="R">usb_ports</test>
-      <test enabled="true" mandatory="false" auto="false">webcam</test>
-      <test enabled="true" mandatory="false" auto="false">wifi</test>
+      <test enabled="false" mandatory="false" auto="false" threshold="50" duration="600">battery_discharge</test>
+      <test enabled="false" mandatory="false" auto="false">bios_logo</test>
+      <test enabled="false" mandatory="false" auto="false" threshold="80" duration="180">cpu_stress</test>
+      <test enabled="false" mandatory="false" auto="false">display</test>
+      <test enabled="false" mandatory="false" auto="false" formfactor="compact" language="us">keyboard</test>
+      <test enabled="false" mandatory="false" auto="false">microphone</test>
+      <test enabled="false" mandatory="false" auto="false" targets="">network</test>
+      <test enabled="false" mandatory="false" auto="false" tests="R">optical_devices</test>
+      <test enabled="false" mandatory="false" auto="false">sound</test>
+      <test enabled="false" mandatory="false" auto="false">pointing_devices</test>
+      <test enabled="false" mandatory="false" auto="false">sim_presence</test>
+      <test enabled="false" mandatory="false" auto="false">speaker</test>
+      <test enabled="false" mandatory="false" auto="false">touchscreen</test>
+      <test enabled="false" mandatory="false" auto="false" tests="R">usb_ports</test>
+      <test enabled="false" mandatory="false" auto="false">webcam</test>
+      <test enabled="false" mandatory="false" auto="false">wifi</test>
     </hardware_tests>
-
     <layouts type="array" key="layout">
       <layout selected="true">us</layout>
       <layout>be</layout>
@@ -71,7 +64,6 @@
       <layout>se</layout>
       <layout>sk</layout>
     </layouts>
-
     <locales type="array" key="locale">
       <locale selected="true">en_US</locale>
       <locale>de_DE</locale>
@@ -88,119 +80,110 @@
       <locale>zh_CN</locale>
       <locale>zh_TW</locale>
     </locales>
-
-    <erasure_standards key="standard" type="array">
+    <erasure_standards type="array" key="standard">
       <standard enabled="true" id="afssi_5020" name="Air Force System Security Instruction 5020"/>
       <standard enabled="true" id="aperiodic_random" name="Aperiodic random overwrite"/>
-      <standard enabled="true" id="bl_ssd" name="Blancco SSD Erasure"/>
-      <standard enabled="true" id="bruce_schneier" name="Bruce Schneier's Algorithm"/>
       <standard enabled="true" id="bsi_vs" name="BSI-2011-VS"/>
       <standard enabled="true" id="bsi_gs" name="BSI-GS"/>
       <standard enabled="true" id="bsi_gse" name="BSI-GSE"/>
       <standard enabled="true" id="bsi_gsk" name="BSI-GSK"/>
+      <standard enabled="true" id="bl_ssd" name="Blancco SSD Erasure"/>
+      <standard enabled="true" id="bruce_schneier" name="Bruce Schneier's Algorithm"/>
       <standard enabled="true" id="cesg_higher" name="CESG CPA - Higher Level"/>
-      <standard enabled="true" id="crypto_erase" name="Sanitize Cryptographic Erasure"/>
       <standard enabled="true" id="dod" name="DoD 5220.22-M"/>
       <standard enabled="true" id="dod_ece" name="DoD 5220.22-M ECE"/>
-      <standard enabled="true" id="nist_clear" name="NIST 800-88 Clear" pattern="0x00" pattern_type="static"/>
-      <standard selected="true" enabled="true" id="nist_purge" name="NIST 800-88 Purge"/>
-      <standard enabled="true" id="firmware" name="Firmware Based Erasure"/>
       <standard enabled="true" id="extended_firmware" name="Extended Firmware Based Erasure"/>
-      <standard enabled="true" id="hmg_lower" name="HMG Infosec Standard 5, Lower Standard"/>
+      <standard enabled="true" id="firmware" name="Firmware Based Erasure"/>
       <standard enabled="true" id="hmg_higher" name="HMG Infosec Standard 5, Higher Standard"/>
-      <standard enabled="true" id="nsa" name="NSA 130-1"/>
-      <standard enabled="true" id="ncsc" name="National Computer Security Center (NCSC-TG-025)"/>
-      <standard enabled="true" id="navso" name="Navy Staff Office Publication (NAVSO P-5239-26)"/>
-      <standard enabled="true" id="tcg_crypto_erase" name="TCG Cryptographic Erasure"/>
-      <standard enabled="true" id="opnavinst" name="OPNAVINST 5239.1A"/>
-      <standard enabled="true" id="peter_gutmann" name="Peter Gutmann's Algorithm"/>
-      <standard enabled="true" id="random_byte_3x" name="Random Byte Overwrite (3x)"/>
-      <standard enabled="true" id="rcmp_tssit" name="RCMP TSSIT OPS-II"/>
-      <standard enabled="true" id="us_army" name="U.S. Army AR380-19"/>
+      <standard enabled="true" id="hmg_lower" name="HMG Infosec Standard 5, Lower Standard"/>
       <standard enabled="true" id="ieee_clear" name="IEEE 2883-2022 Clear"/>
       <standard enabled="true" id="ieee_purge" name="IEEE 2883-2022 Purge"/>
       <standard enabled="false" id="nist_pc" name="NIST 800-88" pattern="0x00" pattern_type="static"/>
+      <standard enabled="true" id="nist_clear" name="NIST 800-88 Clear" pattern="0x00" pattern_type="static"/>
+      <standard selected="true" enabled="true" id="nist_purge" name="NIST 800-88 Purge"/>
+      <standard enabled="true" id="nist_clear_rev2" name="NIST 800-88r2 Clear" pattern="0x00" pattern_type="static"/>
+      <standard enabled="true" id="nist_purge_rev2" name="NIST 800-88r2 Purge"/>
+      <standard enabled="true" id="nsa" name="NSA 130-1"/>
+      <standard enabled="true" id="ncsc" name="National Computer Security Center (NCSC-TG-025)"/>
+      <standard enabled="true" id="navso" name="Navy Staff Office Publication (NAVSO P-5239-26)"/>
+      <standard enabled="true" id="opnavinst" name="OPNAVINST 5239.1A"/>
+      <standard enabled="true" id="peter_gutmann" name="Peter Gutmann's Algorithm"/>
+      <standard enabled="true" id="rcmp_tssit" name="RCMP TSSIT OPS-II"/>
+      <standard enabled="true" id="random_byte_3x" name="Random Byte Overwrite (3x)"/>
+      <standard enabled="true" id="crypto_erase" name="Sanitize Cryptographic Erasure"/>
+      <standard enabled="true" id="tcg_crypto_erase" name="TCG Cryptographic Erasure"/>
+      <standard enabled="true" id="us_army" name="U.S. Army AR380-19"/>
     </erasure_standards>
-
-    <verification_standards key="standard" type="array">
-      <standard enabled="true" id="all_bytes_same" pattern="0x00" name="All bytes the same"/>
+    <verification_standards type="array" key="standard">
+      <standard enabled="true" id="all_bytes_same" name="All bytes the same" pattern="0x00"/>
       <standard enabled="true" id="all_ones" name="All ones"/>
-      <standard enabled="true" id="all_sectors_same" selected="true" name="All sectors the same"/>
+      <standard selected="true" enabled="true" id="all_sectors_same" name="All sectors the same"/>
       <standard enabled="true" id="all_zeros" name="All zeros"/>
     </verification_standards>
-
-    <adapters key="adapter" type="array"/>
-
     <network>
-      <enabled>false</enabled>
+      <enabled>true</enabled>
       <dhcp>true</dhcp>
       <sshd>false</sshd>
       <looping>false</looping>
-      <address/>
-      <mask/>
-      <gateway/>
-      <dns1/>
-      <dns2/>
-      <vlan/>
+      <address></address>
+      <mask></mask>
+      <gateway></gateway>
+      <dns1></dns1>
+      <dns2></dns2>
+      <vlan></vlan>
     </network>
-
     <network_security>
       <enabled>false</enabled>
       <fallback>false</fallback>
-      <protocols key="protocol" type="array">
+      <certificate>false</certificate>
+      <protocols type="array" key="protocol">
         <protocol selected="true">peap</protocol>
         <protocol>tls</protocol>
       </protocols>
-      <certificate>false</certificate>
-      <identity encrypted="false"/>
-      <password encrypted="false"/>
+      <identity encrypted="false"></identity>
+      <password encrypted="false"></password>
     </network_security>
-
-    <proxy>
-      <proxy_address encrypted="false"/>
-      <proxy_port encrypted="false"/>
-      <proxy_username encrypted="false"/>
-      <proxy_password encrypted="false"/>
-    </proxy>
-
-    <mc>
-      <username encrypted="false"/>
-      <password encrypted="false"/>
-      <hostname/>
-      <port/>
-      <timeout>20</timeout>
-      <validate_remote_certificate>true</validate_remote_certificate>
-    </mc>
-
     <network_share>
       <username encrypted="false">blancco</username>
       <password encrypted="false">blancco</password>
-      <domain/>
-      <hostname>10.9.100.1</hostname>
+      <domain></domain>
+      <hostname>172.16.9.1</hostname>
       <path>blancco-reports</path>
-      <protocols key="protocol" type="array">
+      <protocols type="array" key="protocol">
         <protocol selected="true">smb</protocol>
       </protocols>
     </network_share>
-
-    <workflow default="false" offline="false"/>
-
+    <proxy>
+      <proxy_address encrypted="false"></proxy_address>
+      <proxy_port encrypted="false"></proxy_port>
+      <proxy_username encrypted="false"></proxy_username>
+      <proxy_password encrypted="false"></proxy_password>
+    </proxy>
+    <mc>
+      <username encrypted="true">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</username>
+      <password encrypted="true">eHTwqUlvjRsTYm5ljXTb8uN4hiG6ceE5OIBO0PA+TSMCwmI9qD6co8tmDHCwRdiDdZH2bssDAW40ZPQNfxTdKbDHZ0hunEcQob0xnrr8668L4OkZlWx5V17k8KXB5QgBUd0v1ALnvp9m2SQbsnP6IljTtIL+cZNnfrpmSrvPoGFe8fuoxwMrRE9PZett0DHuYnsnaaP7lD/hAWy8hONsp6MbegS0YA7vZi56cFSrpFnPwjWbNxYREfO3FY6kxxOZoslGARLKLS9//EA0DmOzN4HcXhKhVsiIIbNS1rUEpZi8PsAjS9EKPBMaD2riKlmQYkcw4gIis8Cdj649TsqG5+VESRtXtGCelaGPKSZJaeh7x3Obh6Me+TYQBN5gx4YBUB8Ao11MJR1i5cZj0vdYLPknIsZ9EaFOtRozIo5S37sd7uhgsLPX9pUKJBiDMy+a/CP07rqlKS7pI4+onhInRapU1hwTaBQuO1DxvjhtPXwoPrz0aadmq3jXREhs1YRiJ0bIpZcTA6c9zWYWBSQQ/kfbBB18BSEBZmKfUq42K/8ZDmGuhS/rVIXKLU14/VL9vMqngMfxZ9rBLzTQobXmkt9dKTO9VKxd90P3j3epTQXQsPZ2hwW1rF7NlRA3il2iL94aRAgOGWGe0P9O18VmKEd9uGKWVjXid6vNKBK5m5JHBMoN5n7eXxo9uKQEn8Ex6CKN7vMVvbms25RcUiHUOg==</password>
+      <hostname>classic.eu-west-1.blancco.cloud</hostname>
+      <port>443</port>
+      <timeout>20</timeout>
+      <validate_remote_certificate>false</validate_remote_certificate>
+    </mc>
+    <workflow offline="false" default="true"></workflow>
     <erasure>
+      <drive_self_test type="short">false</drive_self_test>
       <max_simultaneous_erasures>50</max_simultaneous_erasures>
-      <remove_hidden_areas>false</remove_hidden_areas>
+      <remove_hidden_areas>true</remove_hidden_areas>
       <preserve_recovery_partition>false</preserve_recovery_partition>
       <store_erasure_progress>false</store_erasure_progress>
-      <remapped mandatory="false" threshold="0">false</remapped>
+      <remapped mandatory="false" threshold="0">true</remapped>
       <action_if_not_possible>interrupt</action_if_not_possible>
       <fail_on_remapped_sectors>false</fail_on_remapped_sectors>
       <fail_on_erasure_errors threshold="5">true</fail_on_erasure_errors>
       <fail_on_read_errors threshold="5">true</fail_on_read_errors>
       <verification>10</verification>
-      <enforced_rules key="rule" type="array">
+      <enforced_rules type="array" key="rule">
         <rule enabled="false" name="enforced_standard" standard_id="bl_ssd" target="ssd"/>
         <rule enabled="true" name="fallback_nist_standard" standard_id="nist_purge" fallback_id="nist_clear"/>
       </enforced_rules>
-      <drive_self_test type="short">false</drive_self_test>
       <fail_on_failed_self_test>false</fail_on_failed_self_test>
       <fail_on_low_erasure_speed threshold="1">false</fail_on_low_erasure_speed>
       <fail_on_timeout threshold="1">false</fail_on_timeout>
@@ -219,36 +202,29 @@
       <allow_tcg_reset_write_pointers>true</allow_tcg_reset_write_pointers>
       <allow_tcg_unmap>true</allow_tcg_unmap>
     </erasure>
-
     <fingerprint>
       <enabled>false</enabled>
       <location>67000</location>
     </fingerprint>
-
     <bootable_report>
       <enabled>true</enabled>
     </bootable_report>
-
     <format_disk>
       <enabled>false</enabled>
       <type>ntfs</type>
     </format_disk>
-
     <spin_down_idle_disk>
       <enabled>false</enabled>
     </spin_down_idle_disk>
-
     <raid>
-      <show_logical_disks>false</show_logical_disks>
+      <show_logical_disks>true</show_logical_disks>
       <enable_passthrough>true</enable_passthrough>
-      <kill_logical_disks>true</kill_logical_disks>
+      <kill_logical_disks>false</kill_logical_disks>
     </raid>
-
     <hotplug>
       <enabled>false</enabled>
-      <timeout>30</timeout>
+      <timeout>60</timeout>
     </hotplug>
-
     <external_device_service>
       <enabled>false</enabled>
       <port>80</port>
@@ -264,28 +240,24 @@
         <test enabled="true">webcam</test>
       </hardware_tests>
     </external_device_service>
-
     <license>
-      <provider>bios</provider>
-      <provider_report>bios</provider_report>
+      <provider>clurichaun</provider>
+      <provider_report>clurichaun</provider_report>
       <edition>Enterprise Volume Edition</edition>
+      <offline></offline>
       <mode>Drive Eraser</mode>
-      <offline/>
     </license>
-
     <image>
-      <description/>
-      <creation_date>2025-03-10</creation_date>
+      <description>BMP Internet - June 2026</description>
+      <creation_date>2026-06-22</creation_date>
     </image>
-
     <customer_data>
-      <business_location/>
-      <customer_license>General Electric Company</customer_license>
-      <erasure_person/>
-      <erasure_provider/>
-      <business_name/>
+      <business_location></business_location>
+      <customer_license>GE Aerospace</customer_license>
+      <erasure_person></erasure_person>
+      <erasure_provider></erasure_provider>
+      <business_name>Non_GEAE_Wired</business_name>
     </customer_data>
-
     <settings>
       <gui>
         <erasure_console>local</erasure_console>
@@ -295,11 +267,11 @@
         <ssd_erasure_exception>true</ssd_erasure_exception>
         <report_view locked="true">standard</report_view>
         <erasure_settings locked="false"/>
-        <show_customer>false</show_customer>
+        <show_customer>true</show_customer>
         <show_operator>false</show_operator>
         <show_partitions>false</show_partitions>
         <screensaver locked="false">
-          <timeout>30</timeout>
+          <timeout>86400</timeout>
           <show_exceptions>false</show_exceptions>
         </screensaver>
         <hexviewer>
@@ -309,7 +281,7 @@
         <drive_selection_percentage>5</drive_selection_percentage>
         <reconfigure_controller_mode>
           <timeout enabled="false">30</timeout>
-          <default_focus_on_proceed>true</default_focus_on_proceed>
+          <default_focus_on_proceed>false</default_focus_on_proceed>
         </reconfigure_controller_mode>
         <disable_sid_block_authentication>
           <timeout enabled="true">0</timeout>
@@ -323,8 +295,8 @@
         <accessibility>
           <available>false</available>
           <enabled>true</enabled>
-          <speaking_rate>80</speaking_rate>
           <key_echo>true</key_echo>
+          <speaking_rate>80</speaking_rate>
         </accessibility>
         <sound_level>70</sound_level>
         <input_method>
@@ -334,82 +306,55 @@
         </input_method>
       </gui>
     </settings>
-
+    <custom_fields type="array" key="custom_field"/>
+    <exclude_verification_ranges type="array" key="exclude_verification_range"/>
     <report>
       <per_drive>false</per_drive>
       <auto_backup>true</auto_backup>
       <extensions type="array" key="extension">
-        <extension selected="true">xml</extension>
+        <extension>xml</extension>
+        <extension selected="true">pdf+xml</extension>
       </extensions>
       <utc_offset>0</utc_offset>
       <network_info>true</network_info>
       <custom_signature>
         <enabled>false</enabled>
-        <label/>
+        <label></label>
       </custom_signature>
       <drive_life_estimation>false</drive_life_estimation>
     </report>
-
-    <custom_fields type="array" key="custom_field">
-      <custom_field type="input" mandatory="true" locked="false" per_drive="false" show_in_editor="false" pattern="" hint="">
-        <name>custom_field_1</name>
-        <title>GERITM Number</title>
-        <value/>
-      </custom_field>
-      <custom_field type="input" mandatory="true" locked="false" per_drive="false" show_in_editor="false" pattern="" hint="">
-        <name>custom_field_2</name>
-        <title>Device Name</title>
-        <value/>
-      </custom_field>
-      <custom_field type="input" mandatory="true" locked="false" per_drive="false" show_in_editor="false" pattern="" hint="">
-        <name>custom_field_3</name>
-        <title>Device Serial Number</title>
-        <value/>
-      </custom_field>
-      <custom_field type="input" mandatory="false" locked="true" per_drive="false" show_in_editor="false" pattern="" hint="">
-        <name>custom_field_4</name>
-        <title>Version</title>
-        <value>EVE_20250310</value>
-      </custom_field>
-    </custom_fields>
-
-    <exclude_verification_ranges type="array" key="exclude_verification_range"/>
-
     <wireless>
       <enabled>true</enabled>
-      <ssid encrypted="false">INTERNETACCESS</ssid>
-      <password encrypted="false">Acc3ssGr@nted22</password>
+      <ssid encrypted="false"></ssid>
+      <password encrypted="false"></password>
       <key_mgmt>WPA-PSK</key_mgmt>
       <scan_ssid>0</scan_ssid>
     </wireless>
-
     <cd_eject>
-      <after_boot>true</after_boot>
+      <after_boot>false</after_boot>
       <after_erasure>false</after_erasure>
       <after_report>false</after_report>
       <at_shutdown>false</at_shutdown>
     </cd_eject>
-
     <system_shutdown>
       <after_erasure>false</after_erasure>
       <after_successful_erasure>false</after_successful_erasure>
     </system_shutdown>
-
     <system_restart>
       <after_erasure>false</after_erasure>
       <after_successful_erasure>false</after_successful_erasure>
     </system_restart>
-
+    <device_enrollment_detection>
+      <persistent_software>false</persistent_software>
+    </device_enrollment_detection>
     <vnc_remote>
       <enabled>false</enabled>
       <mode>viewer</mode>
-      <repeater_hostname/>
+      <repeater_hostname></repeater_hostname>
       <port>5900</port>
-      <password encrypted="false"/>
+      <password encrypted="false"></password>
     </vnc_remote>
-
-    <nvme_over_fabrics type="array" key="connection" enabled="false"/>
-
+    <nvme_over_fabrics enabled="false" type="array" key="connection"/>
     <update>
       <enabled>false</enabled>
       <intervals type="array" key="interval">
@@ -420,6 +365,6 @@
       </intervals>
       <url>https://cdn.blancco.com/products/drive_eraser/download/ota/drive_eraser.json</url>
     </update>
+    <adapters type="array" key="adapter"/>
   </configuration>
 </root>
-<!-- JFLKHGDJLKFHGJCXLKGJFLKDJKLHFELIUFDSALDSAHGLSAVSHGSOFHDSAF -->

playbook/blancco-progress.py

@@ -0,0 +1,285 @@
+#!/usr/bin/env python3
+"""Report Blancco erase progress to the PXE webapp's /imaging dashboard.
+
+Runs inside the Blancco rootfs (installed by blancco-init.sh as a systemd
+service). Follows the AlbusSeven journal and maps its log lines onto the
+same /imaging/status payload the WinPE imaging clients post, so each
+wiping PC gets a tile keyed by BIOS serial with pctype "blancco".
+
+Stages (stage_total 7): 1 booting and 2 starting are posted by
+blancco-init.sh; this script posts 3 waiting for licence, 4 erasing,
+5 report saved, 6 report sent / on share, 7 done. A failed erasure step
+marks the session failed.
+
+The final state comes from the report itself, not the journal: outside
+Blancco's debug mode Albus does not log "erasureFinishedForEntity",
+"Report saving success" or "Auto process reached the final step", so a
+watcher on /reports (where auto mode always saves the report) reads each
+new report and posts 7 "Wipe complete" or "Erasure FAILED".
+
+Usage: blancco-progress.py [--replay FILE] [--dry-run]
+"""
+import glob
+import json
+import os
+import re
+import subprocess
+import sys
+import threading
+import time
+import urllib.request
+import xml.etree.ElementTree as ET
+
+STATUS_URL = "http://172.16.9.1:9009/imaging/status"
+CLOUD_URL = "http://172.16.9.1:9009/reports/cloud-status"
+STAGE_TOTAL = 7
+# Progress lines arrive in bursts; post at most this often unless the
+# stage itself changes.
+MIN_POST_INTERVAL = 3.0
+
+
+def read(path):
+    try:
+        with open(path) as f:
+            return f.read().strip()
+    except OSError:
+        return ""
+
+
+def pxe_iface():
+    """(mac, ip) of the interface on the PXE LAN, or blanks."""
+    try:
+        out = subprocess.run(["ip", "-o", "-4", "addr"], capture_output=True,
+                             text=True, timeout=5).stdout
+    except (OSError, subprocess.SubprocessError):
+        return "", ""
+    for line in out.splitlines():
+        m = re.search(r"^\d+:\s+(\S+)\s+inet (172\.16\.9\.\d+)/", line)
+        if m:
+            return read(f"/sys/class/net/{m.group(1)}/address"), m.group(2)
+    return "", ""
+
+
+REPORTS_DIR = "/reports"
+
+
+def report_outcome(path):
+    """(wiped: bool, failed_drives: list[str]) from a Blancco report XML.
+
+    Per drive: wiped if any of its erasures succeeded, so a failed NIST
+    Purge followed by a successful Clear fallback still counts as wiped.
+    None if the report has no erasures (hardware-only report).
+    """
+    root = ET.parse(path).getroot()
+    drives = {}
+    for i, er in enumerate(root.iter("entries")):
+        if er.get("name") != "erasure":
+            continue
+        state, serial, model = "", "", ""
+        for e in er:
+            if e.tag == "entry" and e.get("name") == "state":
+                state = (e.text or "").strip()
+            if e.tag == "entries" and e.get("name") == "target":
+                for t in e:
+                    if t.get("name") == "serial":
+                        serial = (t.text or "").strip()
+                    elif t.get("name") == "model":
+                        model = (t.text or "").strip()
+        key = serial or f"#{i}"
+        ok = state.lower() == "successful"
+        prev = drives.get(key, (False, ""))
+        drives[key] = (prev[0] or ok, f"{model} {serial}".strip())
+    if not drives:
+        return None
+    failed = [label for ok, label in drives.values() if not ok]
+    return (not failed, failed)
+
+
+SERIAL = read("/sys/class/dmi/id/product_serial") or read("/etc/machine-id")
+MODEL = " ".join(x for x in (read("/sys/class/dmi/id/sys_vendor"),
+                             read("/sys/class/dmi/id/product_name")) if x)
+
+# (pattern, stage_index, stage text or callable(match) -> text, status)
+RULES = [
+    (re.compile(r"Waiting for MC connectivity"), 3,
+     "Waiting for licence (cloud)", None),
+    (re.compile(r"ClurichaunLicenseProvider: ([1-9]\d*) licenses available for product id 1\b"), 3,
+     lambda m: f"Licence OK ({m.group(1)} left)", None),
+    (re.compile(r"startErasure: success"), 4, "Erasing", None),
+    (re.compile(r"About to start Step (\d+) \((.*?)\)\.?$"), 4,
+     lambda m: f"Erasing: step {m.group(1)} - {m.group(2).split(' or ')[0][:60]}", None),
+    (re.compile(r"Step \d+ \(.*\) failed|Erasure step .* failed\b|erasure failed", re.I), 4,
+     "Erasure FAILED", "failed"),
+    (re.compile(r"erasureFinishedForEntity"), 5, "Erasure finished", None),
+    (re.compile(r"\[report\.manager\].*Report saving success"), 5, "Report saved", None),
+    (re.compile(r"Report sent to MC"), 6, "Report sent to cloud", None),
+    (re.compile(r"Auto process reached the final step"), 7, "Done", "succeeded"),
+]
+# Cloud upload of a report: "[comm.manager] Sending report document id: <id>"
+# then "Report sent to MC" (or an upload failure).
+SENDING = re.compile(r"Sending report document id: ([0-9a-fA-F-]{36})")
+SENT = re.compile(r"Report sent to MC")
+SEND_FAILED = re.compile(r"(report (upload|send|sending)[^\n]*fail|failed to (send|upload) report)", re.I)
+# Drive progress, e.g. "FORMAT NVM progress: 75%". Excludes the self-test
+# completion and volume lines that also carry a percentage.
+PROGRESS = re.compile(r"\bprogress[^%\d]{0,20}(\d{1,3})%", re.I)
+
+
+class Reporter:
+    def __init__(self, dry_run=False):
+        self.dry_run = dry_run
+        self.mac, self.ip = pxe_iface()
+        self.stage_index = 2
+        self.stage = "Blancco started"
+        self.status = "in_progress"
+        self.last_post = 0.0
+        self.pending = []
+
+    def post(self, force=False):
+        now = time.monotonic()
+        if not force and now - self.last_post < MIN_POST_INTERVAL:
+            return
+        payload = {
+            "serial": SERIAL,
+            "mac": self.mac,
+            "ip": self.ip,
+            "pctype": "blancco",
+            "hostname_target": MODEL,
+            "current_stage": self.stage,
+            "stage_index": self.stage_index,
+            "stage_total": STAGE_TOTAL,
+            "status": self.status,
+            "source": "blancco",
+        }
+        if self.pending:
+            payload["log_lines"] = self.pending[-20:]
+        if self.dry_run:
+            print(json.dumps(payload))
+        else:
+            req = urllib.request.Request(
+                STATUS_URL, data=json.dumps(payload).encode(),
+                headers={"Content-Type": "application/json"})
+            try:
+                urllib.request.urlopen(req, timeout=5).read()
+            except OSError:
+                return  # webapp unreachable: keep the lines for the next post
+        self.pending = []
+        self.last_post = now
+
+    def cloud(self, document_id, sent, detail):
+        """Tell the webapp whether a report reached the Blancco cloud."""
+        payload = {"document_id": document_id, "serial": SERIAL,
+                   "sent": sent, "detail": detail[:200]}
+        if self.dry_run:
+            print(json.dumps({"cloud": payload}))
+            return
+        req = urllib.request.Request(
+            CLOUD_URL, data=json.dumps(payload).encode(),
+            headers={"Content-Type": "application/json"})
+        try:
+            urllib.request.urlopen(req, timeout=5).read()
+        except OSError:
+            pass
+
+    def line(self, text):
+        text = text.strip()
+        if not text:
+            return
+        m = SENDING.search(text)
+        if m:
+            self.sending = m.group(1)
+        elif getattr(self, "sending", None):
+            if SENT.search(text):
+                self.cloud(self.sending, True, text)
+                self.sending = None
+            elif SEND_FAILED.search(text):
+                self.cloud(self.sending, False, text)
+                self.sending = None
+        for pat, idx, stage, status in RULES:
+            m = pat.search(text)
+            if not m:
+                continue
+            if self.status == "failed" and status != "failed":
+                return  # a failure sticks for the rest of the run
+            if idx < self.stage_index and status != "failed":
+                return  # late licence chatter must not rewind the tile
+            new_stage = stage(m) if callable(stage) else stage
+            changed = (idx, new_stage) != (self.stage_index, self.stage)
+            self.stage_index = max(self.stage_index, idx) if status != "failed" else idx
+            self.stage = new_stage
+            if status:
+                self.status = status
+            self.pending.append(text[:200])
+            if changed:
+                self.post(force=True)
+            return
+        m = PROGRESS.search(text)
+        if m and self.stage_index == 4 and "Self-Test" not in text:
+            base = self.stage.split(" [")[0]
+            self.stage = f"{base} [{m.group(1)}%]"
+            self.post()
+
+
+    def finish(self, path):
+        """Final stage from a finished report on disk."""
+        try:
+            outcome = report_outcome(path)
+        except (OSError, ET.ParseError):
+            return False
+        if outcome is None:
+            return True  # nothing erased in this report; keep watching
+        wiped, failed = outcome
+        name = os.path.basename(path)
+        self.stage_index = 7
+        if wiped:
+            self.stage, self.status = "Wipe complete", "succeeded"
+        else:
+            self.stage, self.status = "Erasure FAILED: " + ", ".join(failed)[:120], "failed"
+        self.pending.append(f"Report {name}: {'all drives wiped' if wiped else 'failed: ' + ', '.join(failed)}")
+        self.post(force=True)
+        return True
+
+
+def watch_reports(rep, interval=5, stable=5):
+    """Post the final stage for each new report Albus saves in /reports."""
+    seen = set(glob.glob(os.path.join(REPORTS_DIR, "*.xml")))
+    while True:
+        time.sleep(interval)
+        for path in sorted(glob.glob(os.path.join(REPORTS_DIR, "*.xml"))):
+            if path in seen:
+                continue
+            try:
+                st = os.stat(path)
+            except OSError:
+                continue
+            if st.st_size == 0 or time.time() - st.st_mtime < stable:
+                continue  # Albus may still be writing it
+            if rep.finish(path):
+                seen.add(path)
+
+
+def main():
+    dry_run = "--dry-run" in sys.argv
+    rep = Reporter(dry_run=dry_run)
+    if "--outcome" in sys.argv:
+        print(report_outcome(sys.argv[sys.argv.index("--outcome") + 1]))
+        return
+    if "--replay" in sys.argv:
+        with open(sys.argv[sys.argv.index("--replay") + 1]) as f:
+            for text in f:
+                rep.line(text)
+        rep.post(force=True)
+        return
+    rep.post(force=True)
+    threading.Thread(target=watch_reports, args=(rep,), daemon=True).start()
+    proc = subprocess.Popen(
+        ["journalctl", "-f", "-b", "-o", "cat", "-t", "AlbusSeven", "-n", "all"],
+        stdout=subprocess.PIPE, text=True, bufsize=1)
+    for text in proc.stdout:
+        rep.line(text)
+        if rep.status in ("succeeded", "failed") and rep.stage_index == STAGE_TOTAL:
+            rep.post(force=True)
+
+
+if __name__ == "__main__":
+    main()

playbook/certs/zscaler-root-ca.crt

@@ -0,0 +1,28 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

playbook/clonezilla-scripts/pxe-cz.sh

@@ -0,0 +1,473 @@
+#!/bin/bash
+# PXE Clonezilla: back up or restore a PC by its machine number.
+#
+# The iPXE menu (GetPxeScript.aspx, "Clonezilla: back up / restore this
+# PC") boots Clonezilla live with:
+#   ocs_prerun="wget ... -O /tmp/pxe-cz.sh http://<server>/clonezilla-scripts/pxe-cz.sh"
+#   ocs_repository="smb3://clonezilla:<password>@<server>/clonezilla/"
+#   ocs_live_run="bash /tmp/pxe-cz.sh"
+#   pxe_cz_mode=save|restore pxe_machine=<typed text> pxe_end=1
+# Clonezilla runs the prerun (this download), mounts the repository on
+# /home/partimag, then runs this script as root on the console.
+#
+# Images are named <machine>-<YYYY-MM-DD-HHMM> (server time, site zone),
+# with pxe-meta.txt (machine, serial, model, disk, date, Clonezilla
+# version, 32/64-bit, check result) next to Clonezilla's own files. The
+# PXE webapp (Tools > Clonezilla backups) reads both.
+#
+# Runs under Clonezilla live's bash (3.3.3 amd64 and 3.2.0-5 i686, both
+# Debian with coreutils, util-linux, dmidecode, wget). Plain ASCII only.
+
+set -u
+
+# PXE_CZ_* overrides exist only for testing this script off Clonezilla.
+OCSROOT="${PXE_CZ_OCSROOT:-/home/partimag}"
+CMDLINE_FILE="${PXE_CZ_CMDLINE:-/proc/cmdline}"
+SYS_BLOCK="${PXE_CZ_SYS_BLOCK:-/sys/block}"
+SITE_TZ="America/New_York"
+SERVER="$(sed -n 's/.*ocs_prerun="[^"]*http:\/\/\([^/":]*\).*/\1/p' "$CMDLINE_FILE" 2>/dev/null)"
+[ -n "$SERVER" ] || SERVER=172.16.9.1
+CMDLINE=" $(cat "$CMDLINE_FILE" 2>/dev/null) "
+
+# --- output helpers -------------------------------------------------------
+
+line() { echo "======================================================================"; }
+
+banner() {
+  echo
+  line
+  for l in "$@"; do echo "  $l"; done
+  line
+  echo
+}
+
+# Ask what to do at the end. Success: power off after 60 s unless a key is
+# pressed. Failure: wait, the operator has to read the message.
+finish() {
+  local ok="$1" ans
+  sync
+  while true; do
+    echo
+    echo "  [Enter] power off     r = reboot     s = shell (type exit to come back)"
+    if [ "$ok" = "yes" ]; then
+      echo -n "  Powering off in 60 seconds... "
+      if ! read -r -t 60 ans; then ans=""; echo; fi
+    else
+      echo -n "  Choice: "
+      read -r ans || ans=""
+    fi
+    case "$ans" in
+      r|R) umount "$OCSROOT" 2>/dev/null; sync; reboot; sleep 30 ;;
+      s|S) bash -i ;;
+      *)   umount "$OCSROOT" 2>/dev/null; sync; poweroff; sleep 30 ;;
+    esac
+  done
+}
+
+fail() {
+  banner "FAILED: $1" "${@:2}"
+  finish no
+  exit 1
+}
+
+# --- machine number -------------------------------------------------------
+
+# Letters, digits and dash, starting with a letter or digit, up to 32.
+valid_machine() {
+  [[ "$1" =~ ^[A-Za-z0-9][A-Za-z0-9-]{0,31}$ ]]
+}
+
+# The text typed at the iPXE prompt sits between pxe_machine= and the
+# pxe_end=1 sentinel, so a typed space shows up here and is rejected
+# instead of being split into another kernel parameter.
+machine_from_cmdline() {
+  local rest
+  case "$CMDLINE" in
+    *" pxe_machine="*" pxe_end=1 "*) ;;
+    *) echo ""; return ;;
+  esac
+  rest="${CMDLINE#* pxe_machine=}"
+  echo "${rest%% pxe_end=1 *}"
+}
+
+# Sets MACHINE (upper case). Not run in $(...): finish() reads the
+# keyboard and must write to the console.
+get_machine() {
+  local m
+  m="$(machine_from_cmdline)"
+  if [ -z "$m" ] || ! valid_machine "$m"; then
+    if [ -n "$m" ]; then
+      banner "The machine number typed at the boot menu is not valid:" \
+             "  [$m]" "Use letters, digits and dash only (for example 6501 or WJ-6501)."
+    else
+      banner "No machine number was given at the boot menu."
+    fi
+    while true; do
+      echo -n "  Machine number (letters, digits, dash; empty = stop): "
+      read -r m || m=""
+      [ -n "$m" ] || finish no
+      valid_machine "$m" && break
+      echo "  [$m] is not a valid machine number: use letters, digits and dash only."
+    done
+  fi
+  MACHINE="$(echo "$m" | tr '[:lower:]' '[:upper:]')"
+}
+
+# --- time -----------------------------------------------------------------
+
+# The PC's clock is often wrong (dead CMOS battery on old PCs, local time
+# on Windows PCs), so take the time from the PXE server's HTTP Date header
+# and set the live system clock from it. Falls back to the PC clock.
+TIME_SOURCE="pc-clock"
+sync_clock() {
+  local hdr epoch
+  hdr="$(wget -q -S --spider -T 10 -t 2 "http://$SERVER/clonezilla-scripts/pxe-cz.sh" 2>&1 \
+        | sed -n 's/^ *Date: *//p' | head -1)"
+  [ -n "$hdr" ] || return 0
+  epoch="$(date -u -d "$hdr" +%s 2>/dev/null)" || return 0
+  [ -n "$epoch" ] || return 0
+  date -u -s "@$epoch" >/dev/null 2>&1 && TIME_SOURCE="pxe-server"
+}
+
+site_date() {
+  if [ -e "/usr/share/zoneinfo/$SITE_TZ" ]; then
+    TZ="$SITE_TZ" date "$@"
+  else
+    date "$@"
+  fi
+}
+
+# --- hardware -------------------------------------------------------------
+
+dmi() {
+  local v
+  v="$(dmidecode -s "$1" 2>/dev/null | grep -v '^#' | head -1 | tr -d '\r' | sed 's/^ *//; s/ *$//')"
+  echo "$v"
+}
+
+# Whole disks a backup can come from or a restore can go to: no CD, loop,
+# RAM, zram, device-mapper, md, eMMC boot areas, or empty card readers.
+list_disks() {
+  local d n size
+  for d in "$SYS_BLOCK"/*; do
+    n="${d##*/}"
+    case "$n" in
+      loop*|sr*|ram*|zram*|dm-*|md*|fd*|nbd*|*boot[0-9]|*rpmb) continue ;;
+    esac
+    size="$(cat "$d/size" 2>/dev/null)"
+    [ -n "$size" ] && [ "$size" -gt 0 ] 2>/dev/null || continue
+    echo "$n"
+  done
+}
+
+disk_bytes() { echo $(( $(cat "$SYS_BLOCK/$1/size" 2>/dev/null || echo 0) * 512 )); }
+
+disk_model() {
+  local m
+  m="$(cat "$SYS_BLOCK/$1/device/model" 2>/dev/null | sed 's/^ *//; s/ *$//')"
+  [ -n "$m" ] || m="$(lsblk -dn -o MODEL "/dev/$1" 2>/dev/null | sed 's/^ *//; s/ *$//')"
+  [ -n "$m" ] || m="unknown model"
+  echo "$m"
+}
+
+disk_tran() { lsblk -dn -o TRAN "/dev/$1" 2>/dev/null | sed 's/ //g'; }
+
+human() {
+  local b="$1"
+  awk -v b="$b" 'BEGIN { if (b >= 1e12) printf "%.1f TB", b/1e12; else printf "%.0f GB", b/1e9 }'
+}
+
+describe_disk() {
+  local n="$1" t
+  t="$(disk_tran "$n")"
+  echo "/dev/$n  $(human "$(disk_bytes "$n")")  $(disk_model "$n")${t:+  ($t)}"
+}
+
+# pick_disk "prompt" -> disk name on stdout. One disk: that one.
+pick_disk() {
+  local prompt="$1" disks n i ans
+  mapfile -t disks < <(list_disks)
+  if [ "${#disks[@]}" -eq 0 ]; then
+    echo ""
+    return
+  fi
+  if [ "${#disks[@]}" -eq 1 ]; then
+    echo "${disks[0]}"
+    return
+  fi
+  while true; do
+    {
+      echo
+      echo "  $prompt"
+      i=1
+      for n in "${disks[@]}"; do
+        echo "    $i) $(describe_disk "$n")"
+        i=$((i + 1))
+      done
+      echo -n "  Number (1-${#disks[@]}): "
+    } >&2
+    read -r ans || ans=""
+    if [[ "$ans" =~ ^[0-9]+$ ]] && [ "$ans" -ge 1 ] && [ "$ans" -le "${#disks[@]}" ]; then
+      echo "${disks[$((ans - 1))]}"
+      return
+    fi
+    echo "  Type a number from the list." >&2
+  done
+}
+
+live_version() {
+  local v=""
+  if [ -e /etc/ocs/ocs-live.conf ]; then
+    # shellcheck disable=SC1091
+    v="$(. /etc/ocs/ocs-live.conf >/dev/null 2>&1; echo "${drbl_ocs_live_ver:-}")"
+  fi
+  [ -n "$v" ] || v="clonezilla $(dpkg-query -W -f='${Version}' clonezilla 2>/dev/null)"
+  echo "$v"
+}
+
+bits() {
+  case "$(uname -m)" in
+    x86_64|amd64) echo 64 ;;
+    *) echo 32 ;;
+  esac
+}
+
+# set_meta FILE KEY VALUE: replace or add one key=value line.
+set_meta() {
+  local f="$1" k="$2" v="$3" tmp
+  v="$(echo "$v" | tr -d '\r\n')"
+  tmp="$(mktemp /tmp/pxe-meta.XXXXXX)"
+  [ -e "$f" ] && grep -v "^$k=" "$f" > "$tmp"
+  echo "$k=$v" >> "$tmp"
+  cat "$tmp" > "$f"
+  rm -f "$tmp"
+}
+
+get_meta() {
+  sed -n "s/^$2=//p" "$1" 2>/dev/null | head -1
+}
+
+repo_ready() {
+  mountpoint -q "$OCSROOT" 2>/dev/null || grep -qs " $OCSROOT cifs " /proc/mounts
+}
+
+# --- backup ---------------------------------------------------------------
+
+do_save() {
+  local m="$1" disk stamp img n meta rc chk
+  disk="$(pick_disk "This PC has more than one disk. Which one do you want to back up?")"
+  [ -n "$disk" ] || fail "No disk found to back up." "Check the disk is connected and shows in the BIOS."
+  stamp="$(site_date +%Y-%m-%d-%H%M)"
+  img="$m-$stamp"
+  n=2
+  while [ -e "$OCSROOT/$img" ]; do
+    img="$m-$stamp-$n"
+    n=$((n + 1))
+  done
+
+  banner "BACKUP of machine $m" \
+         "Disk:   $(describe_disk "$disk")" \
+         "Image:  $img" \
+         "To:     \\\\$SERVER\\clonezilla\\$img"
+
+  ocs-sr -q2 -batch -j2 -z9p -i 0 -sfsck -scs -senc -p command savedisk "$img" "$disk"
+  rc=$?
+
+  meta="$OCSROOT/$img/pxe-meta.txt"
+  if [ ! -d "$OCSROOT/$img" ]; then
+    fail "Clonezilla did not create the image $img (exit code $rc)." \
+         "See the messages above. Nothing was saved."
+  fi
+  : > "$meta"
+  set_meta "$meta" machine "$m"
+  set_meta "$meta" date "$(site_date '+%Y-%m-%d %H:%M %Z')"
+  set_meta "$meta" date_utc "$(date -u +%Y-%m-%dT%H:%M:%SZ)"
+  set_meta "$meta" time_source "$TIME_SOURCE"
+  set_meta "$meta" serial "$(dmi system-serial-number)"
+  set_meta "$meta" manufacturer "$(dmi system-manufacturer)"
+  set_meta "$meta" model "$(dmi system-product-name)"
+  set_meta "$meta" disk "$disk"
+  set_meta "$meta" disk_model "$(disk_model "$disk")"
+  set_meta "$meta" disk_size_bytes "$(disk_bytes "$disk")"
+  set_meta "$meta" clonezilla "$(live_version)"
+  set_meta "$meta" bits "$(bits)"
+  if [ -d /sys/firmware/efi ]; then set_meta "$meta" firmware uefi; else set_meta "$meta" firmware bios; fi
+  if [ "$rc" -ne 0 ]; then
+    set_meta "$meta" save failed
+    set_meta "$meta" check not-run
+    fail "Clonezilla could not save machine $m (exit code $rc)." \
+         "The partial image $img is marked as failed on the share;" \
+         "delete it in the webapp (Tools > Clonezilla backups) and try again."
+  fi
+  set_meta "$meta" save ok
+
+  banner "Checking the saved image $img ..."
+  ocs-chkimg -b "$img"
+  chk=$?
+  set_meta "$meta" check_date "$(site_date '+%Y-%m-%d %H:%M %Z')"
+  if [ "$chk" -ne 0 ]; then
+    set_meta "$meta" check failed
+    fail "The image $img was saved but its CHECK FAILED (exit code $chk)." \
+         "Do not rely on it. Back this PC up again."
+  fi
+  set_meta "$meta" check ok
+  sync
+  banner "SUCCESS: machine $m backed up and checked." \
+         "Image:  $img" \
+         "Serial: $(get_meta "$meta" serial)   Model: $(get_meta "$meta" model)"
+  finish yes
+}
+
+# --- restore --------------------------------------------------------------
+
+is_cz_image() {
+  local d="$1"
+  [ -d "$d" ] || return 1
+  [ -f "$d/disk" ] || [ -f "$d/parts" ] || return 1
+  local f
+  for f in "$d"/*; do
+    case "${f##*/}" in
+      *-ptcl-img*|*.dd-img*|*-img.*|clonezilla-img) return 0 ;;
+    esac
+  done
+  return 1
+}
+
+# Images of one machine, newest first: <machine>-YYYY-MM-DD-HHMM[-n] by
+# name, plus any image whose pxe-meta.txt says machine=<machine>.
+machine_images() {
+  local m="$1" d n mm
+  for d in "$OCSROOT"/*/; do
+    d="${d%/}"
+    n="${d##*/}"
+    is_cz_image "$d" || continue
+    mm="$(get_meta "$d/pxe-meta.txt" machine | tr '[:lower:]' '[:upper:]')"
+    if [ "$mm" = "$m" ]; then
+      echo "$n"
+    elif [ -z "$mm" ] && echo "$n" | tr '[:lower:]' '[:upper:]' | grep -qE "^$m-[0-9]{4}-[0-9]{2}-[0-9]{2}-[0-9]{4}(-[0-9]+)?$"; then
+      echo "$n"
+    fi
+  done | sort_newest
+}
+
+# Sort names by their date stamp (the last YYYY-MM-DD-HHMM[-n]), newest first.
+sort_newest() {
+  local n key
+  while read -r n; do
+    key="$(echo "$n" | grep -oE '[0-9]{4}-[0-9]{2}-[0-9]{2}-[0-9]{4}(-[0-9]+)?$')"
+    echo "${key:-0000}|$n"
+  done | sort -r | cut -d'|' -f2-
+}
+
+image_disks() { tr -s ' \t' '\n' < "$OCSROOT/$1/disk" 2>/dev/null | grep -v '^$'; }
+
+image_disk_bytes() {
+  local img="$1" src="$2" b sec
+  b="$(get_meta "$OCSROOT/$img/pxe-meta.txt" disk_size_bytes)"
+  if [[ "$b" =~ ^[0-9]+$ ]]; then echo "$b"; return; fi
+  # Clonezilla's sfdisk dump: "last-lba: N" (GPT) or the partitions' end.
+  sec="$(sed -n 's/^last-lba: *//p' "$OCSROOT/$img/$src-pt.sf" 2>/dev/null | head -1)"
+  if [[ "$sec" =~ ^[0-9]+$ ]]; then echo $(( (sec + 34) * 512 )); return; fi
+  echo 0
+}
+
+do_restore() {
+  local m="$1" imgs i n ans img src srcb tgt tgtb meta chkopt rc mo se ck
+  mapfile -t imgs < <(machine_images "$m")
+  if [ "${#imgs[@]}" -eq 0 ]; then
+    fail "No images for machine $m on \\\\$SERVER\\clonezilla." \
+         "Check the machine number, or look in the webapp (Tools > Clonezilla backups)."
+  fi
+  while true; do
+    echo
+    echo "  Images of machine $m (newest first):"
+    i=1
+    for n in "${imgs[@]}"; do
+      meta="$OCSROOT/$n/pxe-meta.txt"
+      mo="$(get_meta "$meta" model)"; se="$(get_meta "$meta" serial)"; ck="$(get_meta "$meta" check)"
+      echo "    $i) $n   ${mo:-model ?}  serial ${se:-?}  check: ${ck:-?}"
+      i=$((i + 1))
+    done
+    echo -n "  Image to restore (1-${#imgs[@]}, q = quit): "
+    read -r ans || ans=q
+    case "$ans" in q|Q) finish no ;; esac
+    if [[ "$ans" =~ ^[0-9]+$ ]] && [ "$ans" -ge 1 ] && [ "$ans" -le "${#imgs[@]}" ]; then
+      img="${imgs[$((ans - 1))]}"
+      break
+    fi
+    echo "  Type a number from the list."
+  done
+  meta="$OCSROOT/$img/pxe-meta.txt"
+  if [ "$(get_meta "$meta" save)" = "failed" ]; then
+    fail "The image $img is marked as a FAILED backup and cannot be restored."
+  fi
+  mapfile -t src < <(image_disks "$img")
+  if [ "${#src[@]}" -ne 1 ]; then
+    fail "The image $img holds ${#src[@]} disks (${src[*]:-none})." \
+         "Restore it with Clonezilla: manual (boot menu)."
+  fi
+  srcb="$(image_disk_bytes "$img" "${src[0]}")"
+
+  tgt="$(pick_disk "Which disk do you want to restore $img to? (ALL DATA ON IT WILL BE ERASED)")"
+  [ -n "$tgt" ] || fail "No disk found to restore to."
+  tgtb="$(disk_bytes "$tgt")"
+  if [ "$srcb" -gt 0 ] && [ "$tgtb" -lt "$srcb" ]; then
+    fail "The target disk is SMALLER than the disk the image came from." \
+         "Image disk:  $(human "$srcb")" "Target disk: $(describe_disk "$tgt")" \
+         "Use a disk at least as large, or Clonezilla: manual (expert mode, -icds)."
+  fi
+
+  banner "RESTORE machine $m" \
+         "Image:   $img  (saved $(get_meta "$meta" date))" \
+         "From:    $(get_meta "$meta" model)  serial $(get_meta "$meta" serial)  disk $(human "$srcb")" \
+         "Target:  $(describe_disk "$tgt")" \
+         "" \
+         "EVERYTHING on /dev/$tgt will be ERASED and replaced by this image." \
+         "This PC: $(dmi system-product-name)  serial $(dmi system-serial-number)"
+  echo -n "  Type YES (capitals) to erase /dev/$tgt and restore: "
+  read -r ans || ans=""
+  if [ "$ans" != "YES" ]; then
+    banner "Cancelled. Nothing was written."
+    finish no
+  fi
+
+  # A larger target: -k1 recreates the partition table proportionally
+  # (every partition scaled by target/source size) and -r grows each
+  # filesystem to its new partition, so the extra space is used. The
+  # default (-k0) copies the table as-is and leaves the rest unallocated.
+  # The image was checked after it was saved; check again only if that
+  # check did not pass.
+  chkopt=""
+  [ "$(get_meta "$meta" check)" = "ok" ] && chkopt="-scr"
+  ocs-sr -g auto -e1 auto -e2 -r -j2 -k1 $chkopt -batch -p command restoredisk "$img" "$tgt"
+  rc=$?
+  if [ "$rc" -ne 0 ]; then
+    fail "Clonezilla could not restore $img to /dev/$tgt (exit code $rc)." \
+         "The disk may be partly written: do not boot from it until a restore succeeds."
+  fi
+  sync
+  banner "SUCCESS: $img restored to /dev/$tgt." "At the next start, boot this PC from its disk (not the network)."
+  finish yes
+}
+
+# --- main -----------------------------------------------------------------
+
+MODE="$(echo "$CMDLINE" | sed -n 's/.* pxe_cz_mode=\([a-z]*\) .*/\1/p')"
+case "$MODE" in
+  save|restore) ;;
+  *) fail "Unknown mode [$MODE] on the kernel command line (pxe_cz_mode=save or restore)." ;;
+esac
+
+if ! repo_ready; then
+  fail "The backup share \\\\$SERVER\\clonezilla is not mounted on $OCSROOT." \
+       "Check the PXE server is up and the clonezilla Samba account works" \
+       "(playbook var clonezilla_smb_password), then boot this option again."
+fi
+
+sync_clock
+MACHINE=""
+get_machine
+case "$MODE" in
+  save)    do_save "$MACHINE" ;;
+  restore) do_restore "$MACHINE" ;;
+esac

playbook/engineering/Install-EngineeringLayer.ps1

@@ -0,0 +1,190 @@
+# Install-EngineeringLayer.ps1 - install the Engineering Layer before the MCL
+# orchestrator's cleanup removes C:\Deploy, and make sure the employee gets
+# the "Configure my Engineering Layer" icon.
+#
+# THE RACE THIS SOLVES
+# The bulk-enrollment orchestrator registers a DeleteDeployDir startup task that
+# does "rmdir /s /q C:\Drivers & rmdir /s /q C:\GEA & rmdir /s /q C:\Deploy" on
+# the NEXT boot. The engineering payload (529 MB installer + .NET 3.5 sxs + VC++
+# redists, 653 MB total) lives under C:\Deploy\Applications\extra_engineering.
+# Standard/Engineer builds have no autologon, so a PC that reboots between OOBE
+# and the employee's first sign-in loses C:\Deploy before the first-logon
+# install - and with it this script, which used to be called from there too.
+# Then nothing installed, no error anywhere, and no icon.
+#
+# So, in two steps (both from FlatUnattendW10-engineer.xml):
+#   specialize   -StageOnly : copy the payload AND this script to
+#                C:\PreInstall\engineering while C:\Deploy certainly exists.
+#   first logon  (no switch, run from C:\PreInstall\engineering): install
+#                from the staged copy. C:\Deploy is not needed any more.
+# Run from C:\Deploy (an older unattend) it still stages first, as before.
+#
+# THE ICON
+# Engineering_Install_v3.1 copies "Configure my Engineering Layer.lnk" to
+# C:\Users\Public\Desktop. The employee clicks it once (on the GE network: it
+# maps V: and runs install_local_new.cmd from there), which writes
+# C:\TMP\DUU_Complete.log and deletes the Public icon. After the install this
+# script puts the icon back if it is missing and the PC is not configured
+# yet, and registers an Active Setup component: at each user's first sign-in
+# Windows runs Ensure-EngineeringIcon.ps1 in that user's session, which puts
+# the icon on that user's desktop if the PC is still not configured and the
+# Public icon is gone (someone else clicked it, or it never appeared).
+#
+# Idempotent. Safe to re-run: it skips the copy when the staged payload is
+# already complete and skips the install when the marker is present (the
+# icon check still runs).
+
+[CmdletBinding()]
+param(
+    [string]$Source      = 'C:\Deploy\Applications\extra_engineering',
+    # C:\PreInstall is already the convention for payload that must outlive
+    # imaging - the unattend installs PowerShell 7 from C:\PreInstall\installers.
+    [string]$StagingRoot = 'C:\PreInstall\engineering',
+    [string]$LogDir      = 'C:\Logs\Engineering',
+    # Relative to StagingRoot. Empty: the newest
+    # engineering_layer\Engineering_Install_v<version>.exe (uploaded on the
+    # PXE webapp, engineer image > Engineering Layer).
+    [string]$Installer   = '',
+    [switch]$StageOnly
+)
+
+$ErrorActionPreference = 'Continue'
+New-Item -ItemType Directory -Force -Path $LogDir | Out-Null
+$log    = Join-Path $LogDir 'install-engineering-layer.log'
+$marker = Join-Path $StagingRoot '.installed'
+
+$IconName    = 'Configure my Engineering Layer.lnk'
+$IconSource  = 'C:\TMP\Engineering_Install\Imaging\packages\' + $IconName
+$PublicIcon  = 'C:\Users\Public\Desktop\' + $IconName
+$Configured  = 'C:\TMP\DUU_Complete.log'      # written by install_local_new.cmd
+$ActiveSetup = 'HKLM:\SOFTWARE\Microsoft\Active Setup\Installed Components\GEA-EngineeringLayerIcon'
+
+function Write-EngLog {
+    param([string]$Message, [string]$Level = 'INFO')
+    $line = '[{0}] [{1}] [{2}] {3}' -f (Get-Date -Format 'yyyy-MM-dd HH:mm:ss'), $Level, $env:USERNAME, $Message
+    Add-Content -Path $log -Value $line -ErrorAction SilentlyContinue
+    Write-Host $line
+}
+
+# Icon for whoever signs in next. Called after every install attempt that
+# left the layer installed (fresh or already marked).
+function Set-EngineeringIcon {
+    if (Test-Path -LiteralPath $Configured) {
+        Write-EngLog 'PC already configured (DUU_Complete.log) - no icon needed.'
+        return
+    }
+    if (-not (Test-Path -LiteralPath $IconSource)) {
+        Write-EngLog "Icon source missing: $IconSource (installer layout changed?)" 'ERROR'
+        return
+    }
+    if (Test-Path -LiteralPath $PublicIcon) {
+        Write-EngLog 'Public desktop icon present.'
+    } else {
+        Copy-Item -LiteralPath $IconSource -Destination $PublicIcon -Force -ErrorAction SilentlyContinue
+        if (Test-Path -LiteralPath $PublicIcon) { Write-EngLog 'Public desktop icon was missing - restored.' 'WARN' }
+        else { Write-EngLog "Could not restore $PublicIcon" 'ERROR' }
+    }
+
+    # Per-user fallback, run by Windows once per user at first sign-in.
+    $ensure = Join-Path $StagingRoot 'Ensure-EngineeringIcon.ps1'
+    $body = @(
+        '# Written by Install-EngineeringLayer.ps1; run once per user by Active Setup.'
+        '# Puts "Configure my Engineering Layer" on this user''s desktop when the PC'
+        '# is not configured yet and the Public desktop icon is gone.'
+        "`$src = '$IconSource'"
+        "if (Test-Path -LiteralPath '$Configured') { exit 0 }"
+        "if (Test-Path -LiteralPath '$PublicIcon') { exit 0 }"
+        'if (-not (Test-Path -LiteralPath $src)) { exit 0 }'
+        '$desk = [Environment]::GetFolderPath(''Desktop'')'
+        'if ($desk) { Copy-Item -LiteralPath $src -Destination (Join-Path $desk (Split-Path $src -Leaf)) -Force -ErrorAction SilentlyContinue }'
+        'exit 0'
+    )
+    Set-Content -Path $ensure -Value $body -Encoding ascii -Force
+    New-Item -Path $ActiveSetup -Force | Out-Null
+    Set-ItemProperty -Path $ActiveSetup -Name '(Default)' -Value 'GE Aerospace Engineering Layer icon'
+    Set-ItemProperty -Path $ActiveSetup -Name 'Version' -Value '1,0'
+    Set-ItemProperty -Path $ActiveSetup -Name 'IsInstalled' -Value 1 -Type DWord
+    Set-ItemProperty -Path $ActiveSetup -Name 'StubPath' -Value ('powershell.exe -NoProfile -WindowStyle Hidden -ExecutionPolicy Bypass -File "' + $ensure + '"')
+    Write-EngLog 'Active Setup registered: each new user gets the icon if the PC is still unconfigured.'
+}
+
+Write-EngLog '=== Install-EngineeringLayer starting ==='
+Write-EngLog "Source: $Source"
+Write-EngLog "Staged: $StagingRoot"
+Write-EngLog "Running from: $PSCommandPath"
+
+if (Test-Path -LiteralPath $marker) {
+    Write-EngLog 'Marker present - Engineering Layer already installed.'
+    if (-not $StageOnly) { Set-EngineeringIcon }
+    exit 0
+}
+
+# --- stage the payload out of C:\Deploy -------------------------------------
+function Find-Installer([string]$Dir) {
+    Get-ChildItem -LiteralPath (Join-Path $Dir 'engineering_layer') -Filter 'Engineering_Install_v*.exe' -File -ErrorAction SilentlyContinue |
+        Where-Object { $_.Name -match '^Engineering_Install_v(\d+(\.\d+)*)\.exe$' } |
+        Sort-Object { $v = ($_.Name -replace '^Engineering_Install_v', '') -replace '\.exe$', ''; if ($v -notmatch '\.') { $v += '.0' }; [version]$v } -Descending |
+        Select-Object -First 1
+}
+if (-not $Installer) {
+    $found = Find-Installer $StagingRoot
+    if (-not $found) { $found = Find-Installer $Source }
+    $Installer = if ($found) { 'engineering_layer\' + $found.Name } else { 'engineering_layer\Engineering_Install_v3.1.exe' }
+}
+Write-EngLog "Installer: $Installer"
+$stagedExe = Join-Path $StagingRoot $Installer
+
+if (Test-Path -LiteralPath $stagedExe) {
+    Write-EngLog 'Payload already staged outside C:\Deploy - skipping copy.'
+} else {
+    if (-not (Test-Path -LiteralPath $Source)) {
+        Write-EngLog "Source not found: $Source" 'ERROR'
+        Write-EngLog 'C:\Deploy was removed (DeleteDeployDir) before the payload was staged. Re-stage from the share:' 'ERROR'
+        Write-EngLog '  \\172.16.9.1\winpeapps\gea-engineer\Deploy\Applications\extra_engineering' 'ERROR'
+        exit 2
+    }
+    Write-EngLog 'Copying payload out of C:\Deploy (this is the whole point - do not skip)'
+    New-Item -ItemType Directory -Force -Path $StagingRoot | Out-Null
+    # robocopy, not Copy-Item: 653 MB, restartable, and it reports properly.
+    # Exit codes 0-7 are success, 8+ are failure - inverted vs everything else.
+    # The copy includes this script, so first logon can run it from here.
+    $rc = Start-Process -FilePath 'robocopy.exe' `
+        -ArgumentList @("`"$Source`"", "`"$StagingRoot`"", '/E', '/R:2', '/W:5', '/NFL', '/NDL', '/NJH', '/NJS') `
+        -Wait -PassThru -WindowStyle Hidden
+    if ($rc.ExitCode -ge 8) {
+        Write-EngLog "robocopy failed with exit $($rc.ExitCode) - payload NOT staged" 'ERROR'
+        exit 3
+    }
+    Write-EngLog "Payload staged (robocopy exit $($rc.ExitCode))"
+}
+
+if (-not (Test-Path -LiteralPath $stagedExe)) {
+    Write-EngLog "Installer missing after staging: $stagedExe" 'ERROR'
+    exit 4
+}
+
+if ($StageOnly) {
+    Write-EngLog 'StageOnly requested - payload is safe from cleanup, not installing.'
+    exit 0
+}
+
+# --- install -----------------------------------------------------------------
+# The prereqs (.NET 3.5 sxs + VC++ redists) ship alongside; v3.1 installs them
+# itself and is idempotent, so they are staged for it rather than invoked here.
+Write-EngLog "Running $Installer (this takes a while - .NET 3.5, VC++, Cygwin, DUU)"
+try {
+    $p = Start-Process -FilePath $stagedExe -ArgumentList '/S' -Wait -PassThru
+    Write-EngLog "Installer exit code: $($p.ExitCode)"
+    if ($p.ExitCode -eq 0 -or $p.ExitCode -eq 3010) {
+        if ($p.ExitCode -eq 3010) { Write-EngLog 'Installer requests a reboot (3010)' 'WARN' }
+        Set-Content -Path $marker -Value (Get-Date -Format 'o') -Encoding ascii -Force
+        Write-EngLog 'Engineering Layer installed. Marker written.'
+        Set-EngineeringIcon
+        exit 0
+    }
+    Write-EngLog "Installer returned $($p.ExitCode) - NOT marking as installed" 'ERROR'
+    exit 5
+} catch {
+    Write-EngLog "Installer failed to start: $_" 'ERROR'
+    exit 6
+}

playbook/imaging-status/Send-ImagingStage.ps1

@@ -0,0 +1,96 @@
+# Send-ImagingStage.ps1 - posts one progress step of a gea-standard /
+# gea-engineer build to the PXE webapp's /imaging/status endpoint, so the
+# imaging floor follows these builds past WinPE (the shopfloor build has its
+# own reporting in Shopfloor\lib\Send-PxeStatus.ps1).
+#
+# Called from the image's FlatUnattendW10.xml (specialize RunSynchronous and
+# oobeSystem FirstLogonCommands). Keep those command lines short: Windows
+# rejects the whole unattend if a RunSynchronous Path exceeds 259 characters
+# (check with scripts/lint-unattend.py --local). Deployed to
+# _shared\Applications\extra\pxe-status\ on the PXE server, which PESetup
+# copies to C:\Deploy\Applications\extra\pxe-status\.
+#
+# Best-effort: never blocks or fails Windows setup. Every error is swallowed,
+# the script always exits 0, and each attempt is logged to
+# C:\Logs\send-imaging-stage.log.
+#
+# Three steps: 1 WinPE, 2 Windows setup installing apps, 3 ready at OOBE
+# (succeeded). Everything after OOBE needs the employee to log in, which
+# happens off the PXE network, so PXE cannot see it. Steps above
+# StageTotal (the old first-logon steps 4 and 5 still in the unattends) are
+# logged and not posted, so they cannot reopen a finished build.
+
+param(
+    [Parameter(Mandatory = $true)][string]$Stage,
+    [int]$StageIndex = 0,
+    [int]$StageTotal = 3,
+    [string]$PCType = '',
+    [ValidateSet('in_progress', 'succeeded', 'failed')][string]$Status = 'in_progress',
+    [string]$PxeServer = '172.16.9.1',
+    [int]$Port = 9009,
+    [int]$TimeoutSec = 5,
+    # Copy this script to C:\ProgramData\PxeStatus first: the bulk-enrollment
+    # task deletes C:\Deploy before first logon, when the later steps run.
+    [switch]$Persist
+)
+
+$logFile = 'C:\Logs\send-imaging-stage.log'
+function Log([string]$msg) {
+    try {
+        if (-not (Test-Path 'C:\Logs')) { New-Item -ItemType Directory -Path 'C:\Logs' -Force | Out-Null }
+        "$(Get-Date -Format s) $msg" | Out-File -FilePath $logFile -Append -Encoding utf8
+    } catch { }
+}
+
+if ($Persist) {
+    try {
+        New-Item -ItemType Directory -Path 'C:\ProgramData\PxeStatus' -Force | Out-Null
+        Copy-Item -LiteralPath $PSCommandPath -Destination 'C:\ProgramData\PxeStatus\Send-ImagingStage.ps1' -Force
+    } catch { Log "persist failed: $($_.Exception.Message)" }
+}
+
+if ($StageIndex -gt $StageTotal) {
+    Log "SKIP stage $StageIndex of $StageTotal (after OOBE; PXE does not track it): $Stage"
+    exit 0
+}
+
+try {
+    $serial = $null
+    try { $serial = (Get-CimInstance -ClassName Win32_BIOS -ErrorAction Stop).SerialNumber } catch {
+        try { $serial = (Get-WmiObject -Class Win32_BIOS -ErrorAction Stop).SerialNumber } catch { }
+    }
+    if ([string]::IsNullOrWhiteSpace($serial)) { $serial = $env:COMPUTERNAME }
+    $serial = ($serial -as [string]).Trim()
+
+    $mac = $null
+    try {
+        $nic = Get-NetAdapter -Physical -ErrorAction Stop |
+               Where-Object { $_.Status -eq 'Up' -and $_.MediaType -eq '802.3' } | Select-Object -First 1
+        if ($nic) { $mac = $nic.MacAddress -replace '-', ':' }
+    } catch { }
+
+    $payload = @{
+        serial          = $serial
+        hostname_target = $env:COMPUTERNAME
+        current_stage   = $Stage
+        stage_index     = $StageIndex
+        stage_total     = $StageTotal
+        status          = $Status
+    }
+    if ($PCType) { $payload.pctype = $PCType }
+    if ($mac)    { $payload.mac = $mac }
+    $body = $payload | ConvertTo-Json -Compress
+    $uri  = "http://${PxeServer}:${Port}/imaging/status"
+
+    try {
+        $resp = Invoke-WebRequest -Uri $uri -Method POST -Body $body -ContentType 'application/json' `
+                -UseBasicParsing -TimeoutSec $TimeoutSec -ErrorAction Stop
+        Log "OK $($resp.StatusCode) $body"
+    } catch {
+        # Off the imaging network (or the server is down): nothing to report to.
+        Log "FAIL $($_.Exception.Message) $body"
+    }
+} catch {
+    Log "ERROR $($_.Exception.Message)"
+}
+exit 0

playbook/ipxe/GetPxeScript.aspx

@@ -0,0 +1,198 @@
+#!ipxe
+
+set server 172.16.9.1
+
+:menu
+menu GE Aerospace PXE Boot Menu
+item --gap --             ---- Windows Deployment ----
+item winpe                Windows PE (Image Deployment)
+item --gap --             ---- Drive Erase ----
+item blancco              Blancco Drive Eraser
+item blancco_debug        Blancco Drive Eraser (debug / SSH)
+item --gap --             ---- Utilities ----
+item cz_backup            Clonezilla: back up this PC
+item cz_restore           Clonezilla: restore this PC
+item clonezilla           Clonezilla: manual (USB or other location)
+item clonezilla32         Clonezilla: manual, 32-bit (XP-era PCs, forced)
+item --gap --             Memory test: Dell PCs press F12 at power-on, Diagnostics
+item --gap --             ----
+item reboot               Reboot
+item exit                 Exit to BIOS
+choose --default winpe --timeout 30000 target && goto ${target}
+
+:winpe
+# iPXE 2.0 reads the firmware variable; older iPXE cannot (empty), so it
+# warns as before. Secure Boot confirmed on: no warning, no wait.
+iseq ${efi/SecureBoot:uint8} 1 && goto winpe_boot ||
+iseq ${efi/SecureBoot:hex} 01 && goto winpe_boot ||
+echo
+echo   Secure Boot is OFF on this PC (or this iPXE cannot tell).
+echo   (iPXE read SecureBoot as: [${efi/SecureBoot:hex}] [${efi/SecureBoot:uint8}])
+echo   Windows deployment requires Secure Boot to be ENABLED.
+echo   If you disabled it earlier, re-enable it in BIOS Setup now.
+echo
+prompt --timeout 5000 Press any key to continue (auto-boot in 5s)... && goto winpe_boot || goto winpe_boot
+
+:winpe_boot
+kernel http://${server}/win11/wimboot gui
+initrd http://${server}/win11/EFI/Microsoft/Boot/boot.stl  EFI/Microsoft/Boot/Boot.stl
+initrd http://${server}/win11/EFI/Microsoft/Boot/BCD       EFI/Microsoft/Boot/BCD
+initrd http://${server}/win11/EFI/Boot/bootx64.efi         EFI/Boot/bootx64.efi
+initrd http://${server}/win11/Boot/boot.sdi                Boot/boot.sdi
+initrd http://${server}/win11/sources/boot.wim             sources/boot.wim
+# A command that fails without || aborts the whole iPXE script (the PC
+# drops to firmware with no explanation), so every boot line has one.
+boot || goto winpe_failed
+
+:winpe_failed
+echo
+echo Windows PE boot FAILED (see the error above).
+echo Check that the PXE server is up and the win11 boot files are staged.
+prompt Press any key to return to menu... && goto menu || goto menu
+
+# --- Clonezilla by machine number (back up / restore) ---------------------
+# The image share is \\${server}\clonezilla (Samba account clonezilla,
+# the playbook fills in its password). Clonezilla mounts it on
+# /home/partimag (ocs_repository, SMB 3), downloads
+# clonezilla-scripts/pxe-cz.sh (ocs_prerun) and runs it (ocs_live_run):
+# it checks the machine number, saves <machine>-<YYYY-MM-DD-HHMM> or lists
+# that machine's images to restore, and writes pxe-meta.txt.
+:cz_backup
+set cz_mode save
+goto cz_machine
+
+:cz_restore
+set cz_mode restore
+goto cz_machine
+
+:cz_machine
+# iPXE cannot check characters: pxe-cz.sh accepts letters, digits and dash
+# and asks again there. Empty: ask again. Esc / Ctrl-C: back to the menu.
+echo
+# iPXE drops a trailing space from a command line, so the space after the
+# colon comes from a setting (0x20) rather than the literal text.
+set sp:hex 20
+echo -n Machine number:${sp:string} && read czmachine || goto menu
+isset ${czmachine} || goto cz_machine
+# Same CPU check as the manual entry below (cpuid --ext 29 = 64-bit).
+cpuid --ext 29 && goto cz_auto64 || goto cz_auto32
+
+:cz_auto64
+set base http://${server}/clonezilla
+kernel ${base}/vmlinuz boot=live username=user union=overlay config components noswap edd=on nomodeset nodmraid locales=en_US.UTF-8 keyboard-layouts=us ocs_prerun="wget -q -T 15 -t 5 -O /tmp/pxe-cz.sh http://${server}/clonezilla-scripts/pxe-cz.sh" ocs_repository="smb3://clonezilla:__CLONEZILLA_SMB_PASSWORD__@${server}/clonezilla/" echo_ocs_repository=no ocs_live_run="bash /tmp/pxe-cz.sh" ocs_live_extra_param="" ocs_live_batch=no net.ifnames=0 nosplash noprompt fetch=${base}/filesystem.squashfs pxe_cz_mode=${cz_mode} pxe_machine=${czmachine} pxe_end=1 || goto secureboot_warn
+initrd ${base}/initrd.img || goto boot_failed
+# Secure Boot ON: Debian's shim, as in :clonezilla64 below.
+shim ${base}/shimx64.efi ||
+boot || goto secureboot_warn
+
+:cz_auto32
+# 3.2.0-5 i686 over legacy BIOS only; UEFI goes to the 64-bit build.
+iseq ${platform} efi && goto cz_auto64 ||
+set base http://${server}/clonezilla-i686
+kernel ${base}/vmlinuz boot=live username=user union=overlay config components noswap edd=on nomodeset nodmraid locales=en_US.UTF-8 keyboard-layouts=us ocs_prerun="wget -q -T 15 -t 5 -O /tmp/pxe-cz.sh http://${server}/clonezilla-scripts/pxe-cz.sh" ocs_repository="smb3://clonezilla:__CLONEZILLA_SMB_PASSWORD__@${server}/clonezilla/" echo_ocs_repository=no ocs_live_run="bash /tmp/pxe-cz.sh" ocs_live_extra_param="" ocs_live_batch=no net.ifnames=0 nosplash noprompt fetch=${base}/filesystem.squashfs pxe_cz_mode=${cz_mode} pxe_machine=${czmachine} pxe_end=1 || goto boot_failed
+initrd ${base}/initrd.img || goto boot_failed
+boot || goto boot_failed
+
+# --- Clonezilla manual (interactive: USB, SSH, NFS or any share) ------------
+:clonezilla
+# 64-bit CPUs (cpuid extended bit 29 = long mode) get the current Clonezilla;
+# older 32-bit-only CPUs (Pentium 4 without EM64T, Pentium M, early Atom:
+# many XP-era PCs) get the last 32-bit release. If this iPXE has no cpuid
+# command the check fails and the 32-bit build is used, which also runs
+# on 64-bit CPUs.
+cpuid --ext 29 && goto clonezilla64 || goto clonezilla32
+
+:clonezilla64
+set base http://${server}/clonezilla
+kernel ${base}/vmlinuz boot=live username=user union=overlay config components noswap edd=on nomodeset nodmraid locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no net.ifnames=0 nosplash noprompt fetch=${base}/filesystem.squashfs || goto secureboot_warn
+initrd ${base}/initrd.img || goto boot_failed
+# Secure Boot ON: Clonezilla runs a Debian-signed kernel, started through
+# Debian's Microsoft-signed shim (from the Clonezilla release, staged as
+# clonezilla/shimx64.efi by prepare-boot-tools.sh), the same way Blancco
+# uses Ubuntu's. Its modules (usb-storage, uas, exfat) are signed by the
+# same build key, so USB drives work. Without the shim command (legacy
+# BIOS, old iPXE) the line fails harmlessly and the kernel boots directly.
+shim ${base}/shimx64.efi ||
+boot || goto secureboot_warn
+
+:clonezilla32
+# Clonezilla 3.2.0-5 i686 (the last 32-bit release; later ones are amd64
+# only), for legacy-BIOS XP-era PCs. A UEFI PC is always 64-bit and its
+# firmware cannot start a 32-bit kernel, so UEFI goes to the 64-bit build.
+iseq ${platform} efi && goto clonezilla64 ||
+set base http://${server}/clonezilla-i686
+kernel ${base}/vmlinuz boot=live username=user union=overlay config components noswap edd=on nomodeset nodmraid locales= keyboard-layouts= ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no net.ifnames=0 nosplash noprompt fetch=${base}/filesystem.squashfs || goto boot_failed
+initrd ${base}/initrd.img || goto boot_failed
+boot || goto boot_failed
+
+:blancco
+iseq ${platform} pcbios && goto blancco_bios || goto blancco_efi
+
+:blancco_bios
+echo Loading Blancco for legacy BIOS (canonical)...
+kernel http://${server}/blancco/vmlinuz-bde-linux initrd=initramfs-bde-linux.img,config.img,intel-ucode.img,amd-ucode.img quiet loglevel=3 archisobasedir=arch archiso_http_srv=http://${server}/blancco/ copytoram=y cow_spacesize=50% memtest=00 vmalloc=400M ip=dhcp libata.allow_tpm=1 modprobe.blacklist=btusb rd.udev.timeout=10 systemd.battery-check=0 || goto blancco_bios_failed
+initrd --name intel-ucode.img http://${server}/blancco/intel-ucode.img || goto blancco_bios_failed
+initrd --name amd-ucode.img http://${server}/blancco/amd-ucode.img || goto blancco_bios_failed
+initrd --name config.img http://${server}/blancco/config.img || goto blancco_bios_failed
+initrd --name initramfs-bde-linux.img http://${server}/blancco/initramfs-bde-linux.img || goto blancco_bios_failed
+boot || goto blancco_bios_failed
+:blancco_bios_failed
+echo
+echo Blancco BIOS boot FAILED.
+prompt Press any key to return to menu... && goto menu
+
+:blancco_debug
+iseq ${platform} pcbios && goto blancco_bios ||
+echo Loading Blancco UEFI (debug: verbose, SSH for root)...
+kernel http://${server}/blancco/vmlinuz-ubuntu-70 initrd=kexec-initrd-70.img ip=dhcp nomodeset vga=normal console=tty0 i915.modeset=0 nouveau.modeset=0 modprobe.blacklist=nouveau,nvidiafb,nvidia,nvidia_drm,mei_me,btusb,dcdbas libata.allow_tpm=1 rd.udev.timeout=10 efi=noruntime usbcore.autosuspend=-1 pcie_aspm=off e1000e.IntMode=0 e1000e.eee_enable=0 consoleblank=0 systemd.battery-check=0 systemd.mask=suspend.target,sleep.target,hibernate.target,hybrid-sleep.target no_console_suspend mem_sleep_default=s2idle blancco.debug=1 || goto blancco_efi_grub
+initrd --name intel-ucode.img http://${server}/blancco/intel-ucode.img || goto blancco_efi_grub
+initrd --name amd-ucode.img http://${server}/blancco/amd-ucode.img || goto blancco_efi_grub
+initrd --name kexec-initrd-70.img http://${server}/blancco/kexec-initrd-70.img || goto blancco_efi_grub
+# Secure Boot ON: iPXE 2.0 starts the Canonical-signed kernel through
+# Ubuntu's Microsoft-signed shim. Older iPXE has no shim command: the
+# line fails harmlessly and the kernel boots directly (Secure Boot off).
+shim http://${server}/blancco/shimx64.efi ||
+boot || goto blancco_efi_grub
+
+:blancco_efi
+echo Loading Blancco UEFI (direct kernel)...
+kernel http://${server}/blancco/vmlinuz-ubuntu-70 initrd=kexec-initrd-70.img ip=dhcp quiet loglevel=3 nomodeset vga=normal console=tty0 i915.modeset=0 nouveau.modeset=0 modprobe.blacklist=nouveau,nvidiafb,nvidia,nvidia_drm,mei_me,btusb,dcdbas libata.allow_tpm=1 rd.udev.timeout=10 efi=noruntime usbcore.autosuspend=-1 pcie_aspm=off e1000e.IntMode=0 e1000e.eee_enable=0 consoleblank=0 systemd.battery-check=0 systemd.mask=suspend.target,sleep.target,hibernate.target,hybrid-sleep.target no_console_suspend mem_sleep_default=s2idle || goto blancco_efi_grub
+initrd --name intel-ucode.img http://${server}/blancco/intel-ucode.img || goto blancco_efi_grub
+initrd --name amd-ucode.img http://${server}/blancco/amd-ucode.img || goto blancco_efi_grub
+initrd --name kexec-initrd-70.img http://${server}/blancco/kexec-initrd-70.img || goto blancco_efi_grub
+# Secure Boot ON: iPXE 2.0 starts the Canonical-signed kernel through
+# Ubuntu's Microsoft-signed shim. Older iPXE has no shim command: the
+# line fails harmlessly and the kernel boots directly (Secure Boot off).
+shim http://${server}/blancco/shimx64.efi ||
+boot || goto blancco_efi_grub
+:blancco_efi_grub
+echo Direct kernel boot failed - trying GRUB chain fallback...
+chain http://${server}/blancco/grubx64.efi || goto secureboot_warn
+
+:boot_failed
+echo
+echo Download FAILED (see the error above). Check the PXE server and retry.
+prompt Press any key to return to menu... && goto menu || goto menu
+
+:secureboot_warn
+echo
+echo ======================================================
+echo   This option could not start with Secure Boot enabled.
+echo
+echo   1. Reboot this machine
+echo   2. Press F2 / Del to enter BIOS Setup
+echo   3. Disable Secure Boot
+echo   4. Save and exit BIOS
+echo   5. PXE boot again and select this option
+echo
+echo   Re-enable Secure Boot after completing the task.
+echo ======================================================
+echo
+prompt Press any key to return to menu...
+goto menu
+
+:reboot
+reboot
+
+:exit
+exit

playbook/migrate-to-wifi.ps1

@@ -3,16 +3,16 @@
 # Previously this disabled all wired NICs at first logon to keep PPKG /
 # Intune enrollment routing internet traffic via WiFi. The wired NIC was
 # preferred by Windows because the PXE dnsmasq was handing out a default
-# gateway (dhcp-option=3,10.9.100.1) which Windows installed as a default
+# gateway (dhcp-option=3,172.16.9.1) which Windows installed as a default
 # route, and the lower interface metric of wired beat WiFi. Internet-bound
-# traffic then black-holed at 10.9.100.1 (the PXE server, which doesn't
+# traffic then black-holed at 172.16.9.1 (the PXE server, which doesn't
 # forward).
 #
 # That root cause was fixed by removing the dhcp-option=3 and =6 lines
 # from /etc/dnsmasq.conf on the PXE server. Without an advertised gateway
 # on the PXE side, Windows can't add a default route via wired, so all
 # internet traffic uses WiFi by default and the wired NIC stays harmless
-# for same-subnet PXE/SMB traffic to 10.9.100.1.
+# for same-subnet PXE/SMB traffic to 172.16.9.1.
 #
 # Side effect of the original behavior was an eDNC race: eDNC autostart
 # would fire while the wired NIC was still disabled and hit WSAEINVAL

playbook/preinstall/adobe/Install-AcroReader.cmd

@@ -1,23 +0,0 @@
-@echo off
-REM Install-AcroReader.cmd - Install Adobe Acrobat Reader DC + DC update patch
-REM
-REM Two-step install: base MSI with enterprise transform, then DC update patch.
-REM Same version as the GEA-Engineering image (specialize pass Orders 22-23).
-REM Files staged by startnet.cmd from enrollment share to C:\PreInstall\installers\adobe\.
-
-echo Installing Adobe Acrobat Reader DC...
-msiexec /i "%~dp0AcroRead.msi" TRANSFORMS="%~dp0AcroRead.mst" /quiet /norestart
-if %errorlevel% neq 0 if %errorlevel% neq 3010 (
-    echo Acrobat Reader MSI failed with exit code %errorlevel%
-    exit /b %errorlevel%
-)
-
-echo Applying Adobe Reader DC update patch...
-msiexec /p "%~dp0AcroRdrDCUpd2500120531.msp" /quiet /norestart
-if %errorlevel% neq 0 if %errorlevel% neq 3010 (
-    echo Acrobat Reader patch failed with exit code %errorlevel%
-    exit /b %errorlevel%
-)
-
-echo Adobe Acrobat Reader DC installed successfully.
-exit /b 0

playbook/preinstall/display/Install-KioskApp.cmd

@@ -1,43 +0,0 @@
-@echo off
-REM Install-KioskApp.cmd - Install Lobby Display or Dashboard kiosk app
-REM
-REM Reads C:\Enrollment\display-type.txt to determine which app to install.
-REM Only runs on Display PCs (PCTypes filter in preinstall.json).
-REM Both installers live alongside this script in the staged display\ subtree.
-
-set "TYPEFILE=C:\Enrollment\display-type.txt"
-
-if not exist "%TYPEFILE%" (
-    echo No display-type.txt found - skipping kiosk app install.
-    exit /b 0
-)
-
-set /p DISPLAYTYPE=<"%TYPEFILE%"
-
-if /i "%DISPLAYTYPE%"=="Lobby" (
-    set "INSTALLER=%~dp0GEAerospaceLobbyDisplaySetup.exe"
-    set "APPNAME=Lobby Display"
-) else if /i "%DISPLAYTYPE%"=="Dashboard" (
-    set "INSTALLER=%~dp0GEAerospaceDashboardSetup.exe"
-    set "APPNAME=Dashboard"
-) else (
-    echo Unknown display type: %DISPLAYTYPE%
-    exit /b 1
-)
-
-if not exist "%INSTALLER%" (
-    echo %APPNAME% installer not found: %INSTALLER%
-    exit /b 1
-)
-
-echo Installing %APPNAME%...
-"%INSTALLER%" /VERYSILENT /SUPPRESSMSGBOXES /NORESTART /LOG="C:\Logs\PreInstall\%APPNAME%-install.log"
-set EXITCODE=%errorlevel%
-
-if %EXITCODE% equ 0 (
-    echo %APPNAME% installed successfully.
-) else (
-    echo %APPNAME% exited with code %EXITCODE%.
-)
-
-exit /b %EXITCODE%

playbook/preinstall/drivers/Install-Drivers.cmd

@@ -1,46 +0,0 @@
-@echo off
-REM Install-Drivers.cmd - Adds bundled INF driver packages to the Windows driver store
-REM via pnputil. Runs from C:\PreInstall\installers\drivers\ where each vendor
-REM subdir (prolific\, startech\) sits alongside this script. /subdirs walks into
-REM them so one call covers every bundled driver.
-REM
-REM Writes C:\ProgramData\PXEDrivers\drivers-installed.marker on success so the
-REM preinstall runner's File DetectionMethod can skip re-runs.
-
-setlocal
-
-set LOGDIR=C:\Logs\PreInstall
-set LOG=%LOGDIR%\Install-Drivers.log
-set MARKER_DIR=C:\ProgramData\PXEDrivers
-set MARKER=%MARKER_DIR%\drivers-installed.marker
-
-if not exist "%LOGDIR%" mkdir "%LOGDIR%"
-if not exist "%MARKER_DIR%" mkdir "%MARKER_DIR%"
-
-echo ================================================================ >> "%LOG%"
-echo [%date% %time%] Install-Drivers session start >> "%LOG%"
-echo Source dir: %~dp0 >> "%LOG%"
-echo ================================================================ >> "%LOG%"
-
-REM pnputil /add-driver with /subdirs recurses into vendor subdirs. /install
-REM binds the driver to any matching hardware present now; drivers without a
-REM matching device still land in the driver store and bind on plug-in later.
-pnputil.exe /add-driver "%~dp0*.inf" /subdirs /install >> "%LOG%" 2>&1
-set RC=%ERRORLEVEL%
-
-echo [%date% %time%] pnputil exit code: %RC% >> "%LOG%"
-
-REM pnputil exit codes:
-REM   0    success
-REM   259  ERROR_NO_MORE_ITEMS - no INFs matched (treat as failure)
-REM   3010 at least one driver installed, reboot recommended (treat as success)
-if "%RC%"=="0"    goto :ok
-if "%RC%"=="3010" goto :ok
-
-echo [%date% %time%] FAILED (exit %RC%) >> "%LOG%"
-exit /b %RC%
-
-:ok
-echo [%date% %time%] SUCCESS >> "%LOG%"
-echo installed %date% %time% > "%MARKER%"
-exit /b 0

playbook/preinstall/opentext/README.md

@@ -1,38 +0,0 @@
-# OpenText HostExplorer ShopFloor - install scripts
-
-These three files are git-tracked snapshots of what lives at runtime
-in `/home/camp/pxe-images/main/dependencies/opentext/`. The full
-runtime tree also contains the bundled installer binaries (~106 MB
-total) which are intentionally NOT in git:
-
-```
-OpenTextHostExplorer15x64.msi      ~16 MB
-OpenTextHostExplorer15x64.cab      ~86 MB
-OpenTextHostExplorer15x64_ServicePack1.msp   ~4.4 MB
-ShopFloorx64.mst                   ~20 KB
-Profile/                           5 .hep connection profiles
-Accessories/EB/                    6 .ebs/.ebx macros
-HostExplorer/Keymap/               2 .kmv keymaps
-HostExplorer/Menu/                 2 .hmv menu layouts
-W10shortcuts/                      4 .lnk public-desktop shortcuts
-```
-
-The canonical source for everything (scripts AND binaries) is
-`/home/camp/pxe-images/main/dependencies/opentext/`. The files in
-this dir are mirrors that exist so changes to the install logic and
-the version stamp end up in git history. When editing:
-
-1. Edit `/home/camp/pxe-images/main/dependencies/opentext/Setup-OpenText.ps1`
-   (or `.cmd` / `version.txt`)
-2. Re-run `bash playbook/sync-preinstall.sh` to push the runtime tree
-   to the live PXE server
-3. `cp` the changed file(s) into `playbook/preinstall/opentext/` here
-   so git picks up the change
-4. Re-upload the changed file(s) to Azure Blob at
-   `prod/main/dependencies/opentext/<filename>`
-
-To bump OpenText version: edit `version.txt` only - the value flows
-through to Setup-OpenText.ps1 (which reads it at runtime), to
-Install-OpenText.ps1 (the DSC wrapper, which downloads version.txt
-first as a cheap detection check), and to the registry marker at
-`HKLM:\SOFTWARE\GE\OpenText\Installed`.

playbook/preinstall/opentext/Setup-OpenText.cmd

@@ -1,11 +0,0 @@
-@echo off
-REM Setup-OpenText.cmd - tiny launcher for Setup-OpenText.ps1
-REM
-REM The PXE PreInstall runner only invokes Type:MSI or Type:EXE entries from
-REM preinstall.json. This .cmd lives next to Setup-OpenText.ps1 in the staged
-REM opentext\ subtree and just hands off to PowerShell with bypass policy.
-REM Both files end up at C:\PreInstall\installers\opentext\ via xcopy /E from
-REM the WinPE staging step in startnet.cmd.
-
-powershell -NoProfile -ExecutionPolicy Bypass -File "%~dp0Setup-OpenText.ps1"
-exit /b %errorlevel%

playbook/preinstall/opentext/Setup-OpenText.ps1

@@ -1,361 +0,0 @@
-#!/usr/bin/env pwsh
-# Setup-OpenText.ps1 - OpenText HostExplorer 15 SP1 ShopFloor installer + profile
-# deployment, callable from both PXE PreInstall and Intune DSC paths.
-#
-# WHY THIS EXISTS:
-#   The vendor-supplied OpenText.exe (Inno Setup wrapper built by WJDT) bundles
-#   the install steps but its [Files] section deploys per-user content to
-#   {userappdata} - which resolves to SYSTEM's profile under DSC and to a single
-#   user under PreInstall. As a result the operator (logging in via Azure AD)
-#   never sees the profiles, keymaps, menus, or macros - only the installed
-#   binaries. This script replaces OpenText.exe entirely, doing the same install
-#   steps via direct msiexec calls AND fanning the per-user content out to:
-#     - %ProgramData%\Hummingbird\Connectivity\15.00\Shared\
-#     - C:\Users\Default\AppData\Roaming\Hummingbird\Connectivity\15.00\
-#     - Each existing user profile under C:\Users\
-#
-# INVOKED BY:
-#   - PreInstall: Setup-OpenText.cmd wrapper (because the runner only knows MSI/EXE)
-#   - DSC:        Install-OpenText.ps1 downloads the bundled tree from blob, then
-#                 invokes this script with -SourceDir <temp dir>
-#
-# DETECTION:
-#   Skips if HKLM:\SOFTWARE\GE\OpenText\Installed = $expectedVersion. Marker is
-#   written at the end of a successful run, so the runner / DSC wrapper can
-#   no-op on subsequent invocations.
-
-[CmdletBinding()]
-param(
-    # Override when invoked from a temp dir (DSC path) where the bundled files were
-    # just downloaded. Defaults to $PSScriptRoot, but resolved INSIDE the script body
-    # below - PowerShell evaluates `param([string]$X = $PSScriptRoot)` at parameter-
-    # binding time, when $PSScriptRoot may not yet be populated, so the default winds
-    # up as an empty string. Setting it in the body works because $PSScriptRoot is
-    # reliably populated by then.
-    [string]$SourceDir
-)
-
-$ErrorActionPreference = 'Stop'
-
-if (-not $SourceDir) {
-    $SourceDir = $PSScriptRoot
-}
-
-# Normalize $SourceDir to a canonical absolute path. The CMD shim passes
-# "%~dp0..\apps\opentext" which embeds a literal "..". msiexec / the Windows
-# Installer service fail to open the package with that unresolved segment
-# (exit 1619, ERROR_INSTALL_PACKAGE_OPEN_FAILED), even though every other
-# .NET / PowerShell API resolves it fine. Resolve-Path collapses ".." into
-# a clean drive-rooted path before any msiexec invocation.
-if (Test-Path -LiteralPath $SourceDir) {
-    try { $SourceDir = (Resolve-Path -LiteralPath $SourceDir).ProviderPath } catch {}
-}
-
-# --- Inline site-config reader (this script runs from C:\PreInstall\installers\opentext\,
-# NOT from C:\Enrollment\shopfloor-setup\, so it can't dot-source Get-PCProfile.ps1) ---
-function Get-SiteConfig {
-    $configPath = 'C:\Enrollment\site-config.json'
-    if (-not (Test-Path $configPath)) { return $null }
-    try {
-        return Get-Content $configPath -Raw | ConvertFrom-Json
-    } catch {
-        return $null
-    }
-}
-
-# --- Logging (set up FIRST so any startup error - missing version.txt, broken
-# bundled file, etc. - lands in the log file instead of disappearing into the
-# runner's stdout void) ---
-$logDir  = 'C:\Logs\PreInstall'
-$logFile = Join-Path $logDir 'Setup-OpenText.log'
-$msiLog  = Join-Path $logDir 'Setup-OpenText-msi.log'
-$mspLog  = Join-Path $logDir 'Setup-OpenText-msp.log'
-
-if (-not (Test-Path $logDir)) {
-    New-Item -Path $logDir -ItemType Directory -Force | Out-Null
-}
-
-function Write-SetupLog {
-    param([string]$Message)
-    $line = "[$(Get-Date -Format 'yyyy-MM-dd HH:mm:ss')] $Message"
-    Add-Content -Path $logFile -Value $line -ErrorAction SilentlyContinue
-    Write-Host $line
-}
-
-Write-SetupLog "================================================================"
-Write-SetupLog "=== Setup-OpenText.ps1 starting ==="
-Write-SetupLog "================================================================"
-Write-SetupLog "SourceDir: $SourceDir"
-Write-SetupLog "PSScriptRoot: $PSScriptRoot"
-Write-SetupLog "Running as: $([System.Security.Principal.WindowsIdentity]::GetCurrent().Name)"
-
-# --- Config ---
-# Version is read from version.txt next to this script. ONE source of truth: bumping
-# version.txt is the only edit needed when shipping a new OpenText build. Setup-
-# OpenText.ps1 itself, Install-OpenText.ps1 (DSC wrapper), and the registry marker
-# all derive their notion of "expected version" from this file.
-$versionFile = Join-Path $SourceDir 'version.txt'
-Write-SetupLog "Looking for version.txt at: $versionFile"
-if (-not (Test-Path $versionFile)) {
-    Write-SetupLog "ERROR: version.txt not found in $SourceDir - cannot determine expected version."
-    Write-SetupLog "Directory listing of $SourceDir :"
-    if (Test-Path $SourceDir) {
-        Get-ChildItem $SourceDir -ErrorAction SilentlyContinue | ForEach-Object {
-            Write-SetupLog "  $($_.Name)  $($_.Length) bytes"
-        }
-    } else {
-        Write-SetupLog "  (SourceDir does not exist)"
-    }
-    exit 1
-}
-$expectedVersion = (Get-Content -Path $versionFile -Raw -ErrorAction Stop).Trim()
-if (-not $expectedVersion) {
-    Write-SetupLog "ERROR: version.txt at $versionFile is empty."
-    exit 1
-}
-Write-SetupLog "Expected version (from version.txt): $expectedVersion"
-
-# --- Detection: skip if already deployed at expected version ---
-$markerKey = 'HKLM:\SOFTWARE\GE\OpenText'
-$markerVal = 'Installed'
-if (Test-Path $markerKey) {
-    $installed = (Get-ItemProperty -Path $markerKey -Name $markerVal -ErrorAction SilentlyContinue).$markerVal
-    if ($installed -eq $expectedVersion) {
-        Write-SetupLog "OpenText $expectedVersion already deployed (marker present) - skipping."
-        exit 0
-    }
-    Write-SetupLog "OpenText marker mismatch (found '$installed', expected '$expectedVersion') - re-deploying."
-}
-else {
-    Write-SetupLog "OpenText marker not present - first install."
-}
-
-# --- Verify bundled files are where we expect ---
-$msiPath = Join-Path $SourceDir 'OpenTextHostExplorer15x64.msi'
-$cabPath = Join-Path $SourceDir 'OpenTextHostExplorer15x64.cab'
-$mspPath = Join-Path $SourceDir 'OpenTextHostExplorer15x64_ServicePack1.msp'
-$mstPath = Join-Path $SourceDir 'ShopFloorx64.mst'
-
-foreach ($f in @($msiPath, $cabPath, $mspPath, $mstPath)) {
-    if (-not (Test-Path $f)) {
-        Write-SetupLog "ERROR: required file not found: $f"
-        exit 1
-    }
-}
-
-# --- Step 1: Install the base MSI with the ShopFloor transform ---
-# NOTE: We deliberately do NOT pass REBOOT=ReallySuppress here even though we do
-# for the VC++ MSIs. OpenText HostExplorer installs shell extensions that hook
-# explorer.exe, and the MSI uses Restart Manager to ask explorer to close so the
-# in-use shell DLLs can be replaced. With REBOOT=ReallySuppress, RM closes
-# explorer.exe but interprets "restart explorer" as a reboot action and refuses
-# to relaunch it - leaving the user without a desktop. /norestart on its own
-# prevents the actual Windows reboot but lets RM cleanly close-and-relaunch
-# explorer mid-install. msiexec still returns 3010 ("reboot would be needed"),
-# which we treat as success below.
-Write-SetupLog ""
-Write-SetupLog "Step 1: Installing OpenTextHostExplorer15x64.msi with ShopFloorx64.mst..."
-if (Test-Path $msiLog) { Remove-Item $msiLog -Force -ErrorAction SilentlyContinue }
-
-$msiArgs = "/i `"$msiPath`" TRANSFORMS=`"$mstPath`" /qn /norestart /L*v `"$msiLog`""
-Write-SetupLog "  msiexec.exe $msiArgs"
-
-$psi = New-Object System.Diagnostics.ProcessStartInfo
-$psi.FileName       = 'msiexec.exe'
-$psi.Arguments      = $msiArgs
-$psi.UseShellExecute = $false
-$psi.CreateNoWindow  = $true
-$proc = [System.Diagnostics.Process]::Start($psi)
-$proc.WaitForExit()
-$msiExit = $proc.ExitCode
-Write-SetupLog "  msiexec exit code: $msiExit"
-
-if ($msiExit -ne 0 -and $msiExit -ne 3010) {
-    Write-SetupLog "ERROR: base MSI install failed (exit $msiExit). See $msiLog"
-    exit 1
-}
-if ($msiExit -eq 3010) {
-    Write-SetupLog "  (3010 = reboot needed but suppressed)"
-}
-
-# --- Step 2: Apply Service Pack 1 patch ---
-# Same Restart Manager rationale as Step 1 - skip REBOOT=ReallySuppress so RM
-# can relaunch explorer.exe after replacing the patched shell extension DLLs.
-Write-SetupLog ""
-Write-SetupLog "Step 2: Applying SP1 patch..."
-if (Test-Path $mspLog) { Remove-Item $mspLog -Force -ErrorAction SilentlyContinue }
-
-$mspArgs = "/p `"$mspPath`" /qn /norestart /L*v `"$mspLog`""
-Write-SetupLog "  msiexec.exe $mspArgs"
-
-$psi.Arguments = $mspArgs
-$proc = [System.Diagnostics.Process]::Start($psi)
-$proc.WaitForExit()
-$mspExit = $proc.ExitCode
-Write-SetupLog "  msiexec exit code: $mspExit"
-
-if ($mspExit -ne 0 -and $mspExit -ne 3010) {
-    Write-SetupLog "ERROR: SP1 patch failed (exit $mspExit). See $mspLog"
-    exit 1
-}
-
-# --- Step 3: Deploy profiles, keymaps, menus, accessories ---
-# Source layout (bundled with this script):
-#   $SourceDir\Profile\*.hep
-#   $SourceDir\Accessories\EB\*.eb*
-#   $SourceDir\HostExplorer\Keymap\*.kmv
-#   $SourceDir\HostExplorer\Menu\*.hmv
-#
-# Target layouts (Hummingbird-canonical):
-#   %ProgramData%\Hummingbird\Connectivity\15.00\Shared\Profile\
-#   %ProgramData%\Hummingbird\Connectivity\15.00\Shared\Accessories\EB\
-#   %ProgramData%\Hummingbird\Connectivity\15.00\Shared\HostExplorer\Keymap\
-#   %ProgramData%\Hummingbird\Connectivity\15.00\Shared\HostExplorer\Menu\
-#   <user>\AppData\Roaming\Hummingbird\Connectivity\15.00\Profile\
-#   <user>\AppData\Roaming\Hummingbird\Connectivity\15.00\Accessories\EB\
-#   <user>\AppData\Roaming\Hummingbird\Connectivity\15.00\HostExplorer\Keymap\
-#   <user>\AppData\Roaming\Hummingbird\Connectivity\15.00\HostExplorer\Menu\
-#
-# We deploy to ProgramData\Shared (system-wide fallback), Default User (template
-# inherited by every NEW user profile), and every existing user profile (so
-# already-created accounts like SupportUser get them immediately).
-
-Write-SetupLog ""
-Write-SetupLog "Step 3: Deploying profiles/keymaps/menus/macros..."
-
-# --- Resolve exclude lists from site-config.json (falls back to West Jefferson defaults) ---
-$siteConfig = Get-SiteConfig
-$profileExcludes = if ($siteConfig -and $siteConfig.opentext -and $siteConfig.opentext.excludeProfiles) {
-    @($siteConfig.opentext.excludeProfiles)
-} else {
-    @('WJ_Office.hep', 'IBM_qks.hep', 'mmcs.hep')  # West Jefferson defaults
-}
-$shortcutExcludes = if ($siteConfig -and $siteConfig.opentext -and $siteConfig.opentext.excludeShortcuts) {
-    @($siteConfig.opentext.excludeShortcuts)
-} else {
-    @('WJ_Office.lnk', 'IBM_qks.lnk', 'mmcs.lnk')
-}
-if ($siteConfig) {
-    Write-SetupLog "Site config loaded - profile excludes: $($profileExcludes -join ', ')"
-    Write-SetupLog "Site config loaded - shortcut excludes: $($shortcutExcludes -join ', ')"
-} else {
-    Write-SetupLog "No site-config.json found - using West Jefferson defaults for excludes"
-}
-
-# Map of source subdir -> destination subdir relative to the Hummingbird root.
-# Optional Exclude list drops specific filenames from both the source-to-dest
-# copy AND from the destination if they were left over from a prior install.
-$contentMap = @(
-    @{
-        Src = 'Profile'
-        Dst = 'Profile'
-        Exclude = $profileExcludes
-    }
-    @{ Src = 'Accessories\EB';       Dst = 'Accessories\EB' }
-    @{ Src = 'HostExplorer\Keymap';  Dst = 'HostExplorer\Keymap' }
-    @{ Src = 'HostExplorer\Menu';    Dst = 'HostExplorer\Menu' }
-)
-
-function Copy-HummingbirdContent {
-    param(
-        [string]$RootDst,    # Hummingbird root, e.g. C:\ProgramData\Hummingbird\Connectivity\15.00\Shared
-        [string]$Label
-    )
-    foreach ($entry in $contentMap) {
-        $srcPath = Join-Path $SourceDir $entry.Src
-        if (-not (Test-Path $srcPath)) { continue }
-        $dstPath = Join-Path $RootDst $entry.Dst
-        New-Item -Path $dstPath -ItemType Directory -Force | Out-Null
-
-        # Remove any previously-deployed excluded files from the destination
-        # - handles the case where a PC got them from an older install.
-        if ($entry.Exclude) {
-            foreach ($name in $entry.Exclude) {
-                $stale = Join-Path $dstPath $name
-                if (Test-Path -LiteralPath $stale) {
-                    try {
-                        Remove-Item -LiteralPath $stale -Force -ErrorAction Stop
-                        Write-SetupLog "  $Label : removed stale $name"
-                    } catch {
-                        Write-SetupLog "  $Label : failed to remove $stale : $_"
-                    }
-                }
-            }
-        }
-
-        $files = Get-ChildItem -Path $srcPath -File -ErrorAction SilentlyContinue
-        if ($entry.Exclude) {
-            $files = @($files | Where-Object { $entry.Exclude -notcontains $_.Name })
-        }
-        foreach ($f in $files) {
-            Copy-Item -Path $f.FullName -Destination $dstPath -Force
-        }
-        Write-SetupLog "  $Label : $($entry.Src) -> $dstPath ($($files.Count) files)"
-    }
-}
-
-# 3a. ProgramData Shared
-$sharedRoot = Join-Path $env:ProgramData 'Hummingbird\Connectivity\15.00\Shared'
-Copy-HummingbirdContent -RootDst $sharedRoot -Label 'Shared'
-
-# 3b. Default User (template for new user profiles)
-$defaultUserRoot = 'C:\Users\Default\AppData\Roaming\Hummingbird\Connectivity\15.00'
-Copy-HummingbirdContent -RootDst $defaultUserRoot -Label 'Default User'
-
-# 3c. Every existing user profile under C:\Users\
-$skipNames = @('Default', 'Default User', 'Public', 'defaultuser0', 'All Users', 'WDAGUtilityAccount')
-$userDirs = Get-ChildItem 'C:\Users' -Directory -ErrorAction SilentlyContinue |
-            Where-Object { $skipNames -notcontains $_.Name -and (Test-Path "$($_.FullName)\AppData\Roaming") }
-
-foreach ($u in $userDirs) {
-    $userRoot = Join-Path $u.FullName 'AppData\Roaming\Hummingbird\Connectivity\15.00'
-    Copy-HummingbirdContent -RootDst $userRoot -Label $u.Name
-}
-
-# --- Step 4: Public Desktop shortcuts ---
-# Uses $shortcutExcludes (resolved from site-config.json above) to skip
-# deploying unwanted .lnk files AND remove any a prior install left behind.
-Write-SetupLog ""
-Write-SetupLog "Step 4: Deploying public desktop shortcuts..."
-$shortcutSrc = Join-Path $SourceDir 'W10shortcuts'
-$publicDesktop = 'C:\Users\Public\Desktop'
-
-# Clean up stale copies from prior installs first
-foreach ($name in $shortcutExcludes) {
-    $stale = Join-Path $publicDesktop $name
-    if (Test-Path -LiteralPath $stale) {
-        try {
-            Remove-Item -LiteralPath $stale -Force -ErrorAction Stop
-            Write-SetupLog "  removed stale desktop shortcut: $name"
-        } catch {
-            Write-SetupLog "  failed to remove stale $stale : $_"
-        }
-    }
-}
-
-if (Test-Path $shortcutSrc) {
-    $lnkFiles = Get-ChildItem -Path $shortcutSrc -Filter '*.lnk' -File -ErrorAction SilentlyContinue
-    foreach ($l in $lnkFiles) {
-        if ($shortcutExcludes -contains $l.Name) {
-            Write-SetupLog "  skip (excluded): $($l.Name)"
-            continue
-        }
-        Copy-Item -Path $l.FullName -Destination $publicDesktop -Force
-        Write-SetupLog "  $($l.Name) -> $publicDesktop"
-    }
-}
-
-# --- Step 5: Write registry marker ---
-Write-SetupLog ""
-Write-SetupLog "Step 5: Writing registry marker..."
-if (-not (Test-Path $markerKey)) {
-    New-Item -Path $markerKey -Force | Out-Null
-}
-Set-ItemProperty -Path $markerKey -Name $markerVal -Value $expectedVersion -Force
-Set-ItemProperty -Path $markerKey -Name 'InstalledAt' -Value (Get-Date -Format 'o') -Force
-
-Write-SetupLog ""
-Write-SetupLog "================================================================"
-Write-SetupLog "=== OpenText HostExplorer ShopFloor $expectedVersion deployed ==="
-Write-SetupLog "================================================================"
-exit 0

playbook/preinstall/opentext/version.txt

@@ -1 +0,0 @@
-15.0.SP1.2

playbook/preinstall/oracle/Install-Oracle11r2.cmd

@@ -1,113 +0,0 @@
-@echo off
-REM Install-Oracle11r2.cmd
-REM   Expands the GE Oracle Client 11.2 Administrator zip to a temp dir and
-REM   runs Oracle Universal Installer silently with the GE-customized
-REM   response file.
-REM
-REM   Accepted zip locations (first hit wins):
-REM     %~dp0Oracle_OracleDatabase_11r2_V03.zip         (preinstall flat)
-REM     %~dp0..\apps\Oracle_OracleDatabase_11r2_V03.zip (SFLD share, enforcer)
-REM
-REM   Called by:
-REM     - preinstall runner (Type=EXE, image build time)
-REM     - Install-FromManifest.ps1 (Type=CMD, runtime enforcer)
-REM
-REM   Oracle 11.2 OUI exit codes worth knowing:
-REM     0    = success
-REM     3    = success but with warnings
-REM     1    = general failure
-REM     6    = silent install requested but missing / bad response file
-
-setlocal enabledelayedexpansion
-set "LOG=C:\Logs\OracleClient\install.log"
-if not exist "C:\Logs\OracleClient" mkdir "C:\Logs\OracleClient"
-
-REM Emit a datestamp
-for /f "tokens=2 delims==" %%I in ('wmic os get localdatetime /value 2^>nul ^| find "="') do set LDT=%%I
-set "STAMP=!LDT:~0,14!"
-
-echo [%STAMP%] Install-Oracle11r2.cmd starting >> "%LOG%"
-
-set "SRC_ZIP=%~dp0Oracle_OracleDatabase_11r2_V03.zip"
-if not exist "%SRC_ZIP%" set "SRC_ZIP=%~dp0..\apps\Oracle_OracleDatabase_11r2_V03.zip"
-set "STAGING=%TEMP%\oracle-11r2-install"
-set "CLIENT_DIR=%STAGING%\Oracle_OracleDatabase_11r2_V03\client"
-set "RSP=%CLIENT_DIR%\response\ge_client_install.rsp"
-
-if not exist "%SRC_ZIP%" (
-    echo [%STAMP%] ERROR: zip not found at %SRC_ZIP% >> "%LOG%"
-    echo ERROR: zip not found at %SRC_ZIP%
-    exit /b 2
-)
-
-echo [%STAMP%] Expanding %SRC_ZIP% to %STAGING% >> "%LOG%"
-if exist "%STAGING%" rmdir /s /q "%STAGING%" >nul 2>&1
-mkdir "%STAGING%"
-powershell.exe -NoProfile -ExecutionPolicy Bypass -Command ^
-    "try { Expand-Archive -Path '%SRC_ZIP%' -DestinationPath '%STAGING%' -Force -ErrorAction Stop; exit 0 } catch { Write-Error $_; exit 1 }" ^
-    >> "%LOG%" 2>&1
-
-if not exist "%CLIENT_DIR%\setup.exe" (
-    echo [%STAMP%] ERROR: expanded setup.exe not found at %CLIENT_DIR%\setup.exe >> "%LOG%"
-    exit /b 3
-)
-
-if not exist "%RSP%" (
-    echo [%STAMP%] ERROR: response file missing at %RSP% >> "%LOG%"
-    exit /b 4
-)
-
-echo [%STAMP%] Running OUI silent install (this takes 2-8 minutes) >> "%LOG%"
-"%CLIENT_DIR%\setup.exe" -silent -waitforcompletion -nowait ^
-    -ignoreSysPrereqs ^
-    -responseFile "%RSP%" >> "%LOG%" 2>&1
-set RC=%ERRORLEVEL%
-
-echo [%STAMP%] OUI exit code: %RC% >> "%LOG%"
-
-REM --- Drop GE-customized tnsnames.ora / sqlnet.ora / ldap.ora into ORACLE_HOME.
-REM     The zip ships these in client\ora\ but Oracle's setup.exe does not consume
-REM     them - that copy is the GE Wise wrapper's job, which we bypass. Without
-REM     these, every Oracle-dependent app (eDNC/UDC/NTLARS/CMM tooling) fails with
-REM     ORA-12154 "TNS could not resolve the connect identifier specified".
-REM
-REM     Per-file override: if %~dp0<name>.ora exists (deployed alongside this
-REM     wrapper on the PXE server / SFLD share), use it instead of the bundled
-REM     copy. Lets us push an updated tnsnames.ora without repackaging the zip.
-REM
-REM     Only run when OUI succeeded (RC 0 or 3). On failure ORACLE_HOME may not
-REM     be fully populated and the copy targets may not exist.
-if %RC%==0 goto :do_ora_copy
-if %RC%==3 goto :do_ora_copy
-goto :skip_ora_copy
-
-:do_ora_copy
-set "ORA_DST=C:\Apps\product\11.2.0\client_1\network\admin"
-if not exist "%ORA_DST%" (
-    echo [%STAMP%] WARN: %ORA_DST% does not exist after OUI - skipping .ora copy >> "%LOG%"
-    goto :skip_ora_copy
-)
-for %%F in (tnsnames.ora sqlnet.ora ldap.ora) do (
-    set "ORA_SRC=%~dp0%%F"
-    if not exist "!ORA_SRC!" set "ORA_SRC=%CLIENT_DIR%\ora\%%F"
-    if exist "!ORA_SRC!" (
-        echo [%STAMP%] Copying %%F from !ORA_SRC! to %ORA_DST%\%%F >> "%LOG%"
-        copy /Y "!ORA_SRC!" "%ORA_DST%\%%F" >> "%LOG%" 2>&1
-    ) else (
-        echo [%STAMP%] WARN: %%F not found in either %~dp0 or %CLIENT_DIR%\ora >> "%LOG%"
-    )
-)
-
-:skip_ora_copy
-
-REM Cleanup staging dir to reclaim ~1.5 GB - OUI copies everything to ORACLE_HOME
-echo [%STAMP%] Cleaning up staging dir >> "%LOG%"
-rmdir /s /q "%STAGING%" >nul 2>&1
-
-REM OUI returns 0 for success, 3 for success-with-warnings. Treat both as OK.
-if %RC%==3 (
-    echo [%STAMP%] OUI reported warnings but install succeeded - returning 0 >> "%LOG%"
-    exit /b 0
-)
-
-exit /b %RC%

playbook/preinstall/postppkg.json

@@ -0,0 +1,13 @@
+{
+  "Version": "1.0",
+  "_comment": "Site app list, installed after the post-PPKG reboot (once, as SYSTEM). Empty by default. Add one object per app to Applications and put its installer under pre-install/installers/<folder>/ on the PXE server (enrollment share). See docs/kb/How_To_Deploy_PXE_Server_New_Site.html, 'Adding shopfloor apps'.",
+  "_example": {
+    "Name": "Example App 1.2",
+    "Installer": "exampleapp\\ExampleApp.msi",
+    "Type": "MSI",
+    "InstallArgs": "/qn /norestart",
+    "DetectionMethod": "Registry",
+    "DetectionPath": "HKLM:\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\{00000000-0000-0000-0000-000000000000}"
+  },
+  "Applications": []
+}

playbook/preinstall/preinstall.json

@@ -1,200 +1,13 @@
 {
   "Version": "1.0",
-  "Site": "West Jefferson",
-  "Applications": [
-    {
-      "_comment": "Oracle Client 11.2 Administrator - installed first because downstream apps (eDNC/NTLARS/UDC and CMM tooling) link against the Oracle home and fail cold if it's missing. Installer is a .cmd wrapper (Type=EXE is the preinstall runner's shim for non-MSI launchers, same pattern as OpenText Setup-OpenText.cmd). The wrapper expects Oracle_OracleDatabase_11r2_V03.zip (686 MB) staged next to it, unpacks to %TEMP%, runs Oracle Universal Installer silently with ge_client_install.rsp, then cleans up the staging dir. OUI exit 3 is treated as success (warnings-but-ok). Detection via the registered home key; downstream upgrades or version pins are handled by the runtime enforcer's Oracle Client 11.2 manifest entry in common/manifest.json.",
-      "Name": "Oracle Client 11.2",
-      "Installer": "oracle\\Install-Oracle11r2.cmd",
-      "Type": "EXE",
-      "InstallArgs": "",
-      "LogFile": "C:\\Logs\\OracleClient\\install.log",
-      "DetectionMethod": "Registry",
-      "DetectionPath": "HKLM:\\SOFTWARE\\Oracle\\KEY_OraClient11g_home1",
-      "DetectionName": "ORACLE_HOME_NAME",
-      "DetectionValue": "OraClient11g_home1",
-      "PCTypes": ["Standard", "CMM", "Genspect", "Keyence", "WaxAndTrace", "Display"]
-    },
-    {
-      "_comment": "VC++ 2008 SP1 x86 - the bootstrapper (vcredist2008_x86.exe) ignores /norestart and triggers an immediate Windows reboot when files are in use (per Aaron Stebner's MSDN docs). Fix: install the extracted vc_red.msi directly with REBOOT=ReallySuppress, which IS hard-honored by Windows Installer. msiexec may return 3010 (would-have-rebooted-but-suppressed) but won't actually reboot. cab name 'vc_red.cab' is hardcoded in the MSI's Media table - do not rename.",
-      "Name": "VC++ Redistributable 2008 x86",
-      "Installer": "vcredist/2008/installer.msi",
-      "Type": "MSI",
-      "InstallArgs": "/qn /norestart REBOOT=ReallySuppress NOVSUI=1 USING_EXUIH_SILENT=1",
-      "DetectionMethod": "Registry",
-      "DetectionPath": "HKLM:\\SOFTWARE\\WOW6432Node\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\{9BE518E6-ECC6-35A9-88E4-87755C07200F}",
-      "PCTypes": ["*"]
-    },
-    {
-      "_comment": "VC++ 2010 x86 - same fix as 2008. Bootstrapper ignores /norestart; extracted MSI with REBOOT=ReallySuppress does not.",
-      "Name": "VC++ Redistributable 2010 x86",
-      "Installer": "vcredist/2010/installer.msi",
-      "Type": "MSI",
-      "InstallArgs": "/qn /norestart REBOOT=ReallySuppress NOVSUI=1 USING_EXUIH_SILENT=1",
-      "DetectionMethod": "Registry",
-      "DetectionPath": "HKLM:\\SOFTWARE\\WOW6432Node\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\{F0C3E5D1-1ADE-321E-8167-68EF0DE699A5}",
-      "PCTypes": ["*"]
-    },
-    {
-      "_comment": "VC++ 2012 x86 Minimum Runtime - extracted from vcredist2012_x86.exe Burn bundle. Same REBOOT=ReallySuppress fix.",
-      "Name": "VC++ Redistributable 2012 x86 (Minimum)",
-      "Installer": "vcredist/2012-min/installer.msi",
-      "Type": "MSI",
-      "InstallArgs": "/qn /norestart REBOOT=ReallySuppress NOVSUI=1 USING_EXUIH_SILENT=1",
-      "DetectionMethod": "Registry",
-      "DetectionPath": "HKLM:\\SOFTWARE\\WOW6432Node\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\{BD95A8CD-1D9F-35AD-981A-3E7925026EBB}",
-      "PCTypes": ["*"]
-    },
-    {
-      "Name": "VC++ Redistributable 2012 x86 (Additional)",
-      "Installer": "vcredist/2012-add/installer.msi",
-      "Type": "MSI",
-      "InstallArgs": "/qn /norestart REBOOT=ReallySuppress NOVSUI=1 USING_EXUIH_SILENT=1",
-      "DetectionMethod": "Registry",
-      "DetectionPath": "HKLM:\\SOFTWARE\\WOW6432Node\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\{B175520C-86A2-35A7-8619-86DC379688B9}",
-      "PCTypes": ["*"]
-    },
-    {
-      "_comment": "VC++ 2013 x86 Minimum Runtime - extracted from vcredist2013_x86.exe Burn bundle.",
-      "Name": "VC++ Redistributable 2013 x86 (Minimum)",
-      "Installer": "vcredist/2013-min/installer.msi",
-      "Type": "MSI",
-      "InstallArgs": "/qn /norestart REBOOT=ReallySuppress NOVSUI=1 USING_EXUIH_SILENT=1",
-      "DetectionMethod": "Registry",
-      "DetectionPath": "HKLM:\\SOFTWARE\\WOW6432Node\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\{13A4EE12-23EA-3371-91EE-EFB36DDFFF3E}",
-      "PCTypes": ["*"]
-    },
-    {
-      "Name": "VC++ Redistributable 2013 x86 (Additional)",
-      "Installer": "vcredist/2013-add/installer.msi",
-      "Type": "MSI",
-      "InstallArgs": "/qn /norestart REBOOT=ReallySuppress NOVSUI=1 USING_EXUIH_SILENT=1",
-      "DetectionMethod": "Registry",
-      "DetectionPath": "HKLM:\\SOFTWARE\\WOW6432Node\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\{F8CFEB22-A2E7-3971-9EDA-4B11EDEFC185}",
-      "PCTypes": ["*"]
-    },
-    {
-      "_comment": "VC++ 2013 x64 Minimum Runtime - required by Keyence VR-6000 Series Software. Extracted from the Keyence installer's Windows Installer cache. Same REBOOT=ReallySuppress pattern as the x86 variants.",
-      "Name": "VC++ Redistributable 2013 x64 (Minimum)",
-      "Installer": "vcredist/2013-x64-min/installer.msi",
-      "Type": "MSI",
-      "InstallArgs": "/qn /norestart REBOOT=ReallySuppress NOVSUI=1 USING_EXUIH_SILENT=1",
-      "DetectionMethod": "Registry",
-      "DetectionPath": "HKLM:\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\{A749D8E6-B613-3BE3-8F5F-045C84EBA29B}",
-      "PCTypes": ["*"]
-    },
-    {
-      "_comment": "VC++ 2013 x64 Additional Runtime - required by Keyence VR-6000 Series Software. Pairs with the Minimum Runtime above.",
-      "Name": "VC++ Redistributable 2013 x64 (Additional)",
-      "Installer": "vcredist/2013-x64-add/installer.msi",
-      "Type": "MSI",
-      "InstallArgs": "/qn /norestart REBOOT=ReallySuppress NOVSUI=1 USING_EXUIH_SILENT=1",
-      "DetectionMethod": "Registry",
-      "DetectionPath": "HKLM:\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\{929FBD26-9020-399B-9A7A-751D61F0B942}",
-      "PCTypes": ["*"]
-    },
-    {
-      "_comment": "VC++ 2010 x64 - required by PC-DMIS 2016/2019 R2 on CMM PCs. PCDLRN.exe links against msvcr100.dll and the VS 2010 MFC DLLs which are only provided by this redistributable. Extracted from the PC-DMIS 2016 bundle's attached container (a1 payload). Silent install: /q /norestart. Detection: Uninstall key under the native x64 hive with fixed product GUID.",
-      "Name": "VC++ Redistributable 2010 x64",
-      "Installer": "vcredist/2010-x64/vcredist_x64.exe",
-      "Type": "EXE",
-      "InstallArgs": "/q /norestart",
-      "DetectionMethod": "Registry",
-      "DetectionPath": "HKLM:\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\{1D8E6291-B0D5-35EC-8441-6616F567A0F7}",
-      "DetectionName": "DisplayVersion",
-      "DetectionValue": "10.0.40219",
-      "PCTypes": ["*"]
-    },
-    {
-      "_comment": "VC++ 2012 x64 - required by PC-DMIS 2016/2019 R2. Same rationale as 2010 x64; PC-DMIS links against msvcr110.dll / MFC110. Extracted from the PC-DMIS 2016 bundle's attached container (a2 payload). Detection on the Minimum Runtime GUID (the main redist wrapper installs both Minimum and Additional sub-packages).",
-      "Name": "VC++ Redistributable 2012 x64",
-      "Installer": "vcredist/2012-x64/vcredist_x64.exe",
-      "Type": "EXE",
-      "InstallArgs": "/q /norestart",
-      "DetectionMethod": "Registry",
-      "DetectionPath": "HKLM:\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\{5AF4E09F-5C9B-3AAF-B731-544D3DC821DD}",
-      "DetectionName": "DisplayVersion",
-      "DetectionValue": "11.0.51106",
-      "PCTypes": ["*"]
-    },
-    {
-      "_comment": "VC++ 2015-2022 x86 - extracted from vcredist2015_2017_2019_2022_x86.exe Burn bundle. The bundle contains 2022 14.44.35211 plus 8 chained KB updates for older 2015/2017/2019 releases. We install only the 2022 Min+Add MSIs - the CRT v140 ABI is shared across 2015/2017/2019/2022, so the latest pair covers all four versions on Windows 10/11.",
-      "Name": "VC++ Redistributable 2022 x86 (Minimum)",
-      "Installer": "vcredist/2022-min/installer.msi",
-      "Type": "MSI",
-      "InstallArgs": "/qn /norestart REBOOT=ReallySuppress NOVSUI=1 USING_EXUIH_SILENT=1",
-      "DetectionMethod": "Registry",
-      "DetectionPath": "HKLM:\\SOFTWARE\\WOW6432Node\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\{922480B5-CAEB-4B1B-AAA4-9716EFDCE26B}",
-      "PCTypes": ["*"]
-    },
-    {
-      "Name": "VC++ Redistributable 2022 x86 (Additional)",
-      "Installer": "vcredist/2022-add/installer.msi",
-      "Type": "MSI",
-      "InstallArgs": "/qn /norestart REBOOT=ReallySuppress NOVSUI=1 USING_EXUIH_SILENT=1",
-      "DetectionMethod": "Registry",
-      "DetectionPath": "HKLM:\\SOFTWARE\\WOW6432Node\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\{C18FB403-1E88-43C8-AD8A-CED50F23DE8B}",
-      "PCTypes": ["*"]
-    },
-    {
-      "_comment": "Adobe Acrobat Reader DC - same version as GEA-Engineering image. Two-step install via Install-AcroReader.cmd wrapper: base MSI with enterprise transform (AcroRead.mst) then DC update patch (AcroRdrDCUpd2500120531.msp). Source files on PXE server at /srv/samba/winpeapps/gea-engineer/Deploy/Applications/extra/adobe/ - copy to /srv/samba/enrollment/preinstall/installers/adobe/.",
-      "Name": "Adobe Acrobat Reader DC",
-      "Installer": "adobe\\Install-AcroReader.cmd",
-      "Type": "EXE",
-      "InstallArgs": "",
-      "DetectionMethod": "File",
-      "DetectionPath": "C:\\Program Files (x86)\\Adobe\\Acrobat Reader DC\\Reader\\AcroRd32.exe",
-      "PCTypes": ["*"]
-    },
-    {
-      "_comment": "OpenText HostExplorer 15 SP1 ShopFloor - replaced the WJDT-built OpenText.exe Inno wrapper with our own Setup-OpenText.ps1 that does the same install steps (msiexec base + ShopFloor.mst transform + SP1 .msp patch) PLUS fans the per-user profile/keymap/menu/macro content out to Default User and every existing user profile. The Inno wrapper deployed per-user content to {userappdata} which resolves to whichever user is running the installer (SYSTEM under DSC, single user under PreInstall) so Azure-AD users never saw the profiles. Setup-OpenText.cmd is a tiny launcher that hands off to Setup-OpenText.ps1 because the runner only handles MSI/EXE types. All bundled files live in vcredist-style subtree at dependencies/opentext/ and get xcopied through WinPE staging. NO DetectionMethod here on purpose - Setup-OpenText.ps1 owns its own version check by reading version.txt next to itself and comparing to HKLM:\\SOFTWARE\\GE\\OpenText\\Installed; the runner always invokes the wrapper (cost: ~1s of PowerShell launch when up-to-date) so the version constant lives in exactly one place: dependencies/opentext/version.txt.",
-      "Name": "OpenText HostExplorer ShopFloor",
-      "Installer": "opentext\\Setup-OpenText.cmd",
-      "Type": "EXE",
-      "InstallArgs": "",
-      "LogFile": "C:\\Logs\\PreInstall\\Setup-OpenText.log",
-      "PCTypes": ["Standard", "CMM", "Keyence", "Genspect", "WaxAndTrace", "Lab"]
-    },
-    {
-      "_comment": "UDC_Setup.exe spawns a hidden WPF window (UDC.exe) after install and never exits, so the runner needs KillAfterDetection: true to terminate UDC_Setup.exe + UDC.exe once the registry detection passes. This is an OPT-IN flag - normal installers should NOT set it because killing msiexec mid-install leaves msiserver holding the install mutex and the next msiexec call returns 1618 (Oracle hit this exact bug).",
-      "Name": "UDC",
-      "Installer": "UDC_Setup.exe",
-      "Type": "EXE",
-      "InstallArgs": "\"West Jefferson\" -9999",
-      "KillAfterDetection": true,
-      "DetectionMethod": "Registry",
-      "DetectionPath": "HKLM:\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\UDC",
-      "PCTypes": ["Standard-Machine"]
-    },
-    {
-      "_comment": "Display kiosk app (Lobby Display or Dashboard). Install-KioskApp.cmd wrapper reads C:\\Enrollment\\display-type.txt to determine which installer to run. Both GEAerospaceLobbyDisplaySetup.exe and GEAerospaceDashboardSetup.exe must be staged in the display\\ subtree alongside the wrapper. Inno Setup /VERYSILENT is idempotent so no detection needed.",
-      "Name": "Display Kiosk App",
-      "Installer": "display\\Install-KioskApp.cmd",
-      "Type": "EXE",
-      "InstallArgs": "",
-      "LogFile": "C:\\Logs\\PreInstall\\Dashboard-install.log",
-      "PCTypes": ["Display"]
-    },
-    {
-      "_comment": "WJF Defect Tracker - replaces old ClickOnce deployment. MSI creates desktop + Start Menu shortcuts. Enforcer on SFLD share handles version updates post-imaging. TARGETDIR explicit because VS deployment MSI defaults to random path without it.",
-      "Name": "WJF Defect Tracker",
-      "Installer": "WJF_Defect_Tracker.msi",
-      "Type": "MSI",
-      "InstallArgs": "/qn /norestart ALLUSERS=1 REBOOT=ReallySuppress TARGETDIR=\"C:\\Program Files (x86)\\WJF_Defect_Tracker\"",
-      "DetectionMethod": "File",
-      "DetectionPath": "C:\\Program Files (x86)\\WJF_Defect_Tracker\\Defect_Tracker.exe",
-      "PCTypes": ["*"]
-    },
-    {
-      "_comment": "Shopfloor Standard serial-port drivers: StarTech PCIe serial adapter (MosChip-based) + Prolific PL2303 USB-to-serial. Install-Drivers.cmd runs pnputil /add-driver with /subdirs /install so every bundled INF under drivers/ lands in the Windows driver store and auto-binds to matching hardware present now or plugged in later. Scoped to Standard PCs (both Machine + Timeclock) because the PCTypes filter is type-level only; installing a serial driver on a Timeclock without the hardware is harmless - it just sits in the driver store.",
-      "Name": "Shopfloor Serial Drivers",
-      "Installer": "drivers\\Install-Drivers.cmd",
-      "Type": "EXE",
-      "InstallArgs": "",
-      "LogFile": "C:\\Logs\\PreInstall\\Install-Drivers.log",
-      "DetectionMethod": "File",
-      "DetectionPath": "C:\\ProgramData\\PXEDrivers\\drivers-installed.marker",
-      "PCTypes": ["Standard"]
-    }
-  ]
+  "_comment": "Site app list, installed during setup (same logon as the PPKG, before the post-PPKG reboot). Empty by default. Add one object per app to Applications and put its installer under pre-install/installers/<folder>/ on the PXE server (enrollment share). See docs/kb/How_To_Deploy_PXE_Server_New_Site.html, 'Adding shopfloor apps'.",
+  "_example": {
+    "Name": "Example App 1.2",
+    "Installer": "exampleapp\\ExampleApp.msi",
+    "Type": "MSI",
+    "InstallArgs": "/qn /norestart",
+    "DetectionMethod": "Registry",
+    "DetectionPath": "HKLM:\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\{00000000-0000-0000-0000-000000000000}"
+  },
+  "Applications": []
 }

playbook/pxe-server-helpers/dnsmasq.service.d/nic-guard.conf

@@ -0,0 +1,18 @@
+# dnsmasq drop-in: refuse to start DHCP/PXE unless the imaging NIC is on
+# the isolated imaging network.
+#
+# Installed as /etc/systemd/system/dnsmasq.service.d/nic-guard.conf by
+# pxe_server_setup.yml. pxe-nic-check --guard listens on the imaging NIC
+# for 5 s and sends one DHCPDISCOVER (~6 s total), then exits:
+#   0  safe to serve (isolated, no link, or the check itself broke - it
+#      fails open on bugs and says so loudly in the journal)
+#   1  DO NOT serve: a foreign DHCP server or a managed/corporate switch
+#      (LLDP, CDP, 802.1X) is on the imaging NIC. dnsmasq does not start.
+#
+# Why did dnsmasq not start?   journalctl -u dnsmasq -b | grep pxe-nic-check
+# Full picture:                pxe-nic-check        (or the webapp status page)
+# Guard does not run on "systemctl reload"; every start/restart runs it,
+# including the @reboot cron restart.
+
+[Service]
+ExecStartPre=/usr/local/sbin/pxe-nic-check --guard

playbook/pxe-server-helpers/pxe-dhcp-hook.sh

@@ -3,10 +3,15 @@
 # pxe-dhcp-hook.sh - dnsmasq dhcp-script hook.
 #
 # Runs every time a PXE client gets/changes/releases a DHCP lease on
-# 10.9.100.0/24. Flushes conntrack entries and drops any lingering
-# TCP sockets for that client IP. Prevents stale server-side state from
-# causing "System error 53 - network path not found" when a WinPE client
-# re-images the same machine without a clean SMB session teardown.
+# 172.16.9.0/24. Flushes that client's SMB (TCP 445 and 139) conntrack
+# entries and drops its lingering SMB sockets. Prevents stale server-side
+# state from causing "System error 53 - network path not found" when a
+# WinPE client re-images the same machine without a clean SMB session
+# teardown.
+#
+# SMB only, on purpose: the lease that fires this hook is iPXE's, and its
+# first HTTP fetch of the boot menu is racing this script. Killing every
+# socket or conntrack entry for the client IP broke that fetch.
 #
 # dnsmasq calls this with argv:
 #   $1 = action (add | old | del)
@@ -14,10 +19,21 @@
 #   $3 = client IP
 #   $4 = hostname (may be empty)
 #
+# A re-image usually comes back to the SAME lease (same MAC, same IP), which
+# dnsmasq reports as "old", not "add" - and only at all because dnsmasq.conf
+# sets script-on-renewal. "old" also fires when a running Windows PC renews
+# its lease, so on "old" we only clear state when the request came from PXE
+# firmware or iPXE (vendor class PXEClient...): that machine has just
+# rebooted into a network boot, so any server-side session for its IP is
+# dead. A renewal from Windows (vendor class "MSFT 5.0") is left alone.
+#
 # Must exit quickly; dnsmasq waits for it. Logs to syslog via logger.
 
 set +e
 
+# dnsmasq's environment may lack sbin; keep any PATH it gave us first.
+PATH="${PATH:+$PATH:}/usr/sbin:/usr/bin:/sbin:/bin"
+
 action="$1"
 mac="$2"
 ip="$3"
@@ -25,13 +41,26 @@ host="${4:-}"
 
 [ -z "$ip" ] && exit 0
 
+clear_state() {
+    local port
+    for port in 445 139; do
+        # client -> our share, and anything the other way round
+        conntrack -D -p tcp -s "$ip" --dport "$port" >/dev/null 2>&1
+        conntrack -D -p tcp -d "$ip" --sport "$port" >/dev/null 2>&1
+    done
+    # our SMB sockets (local port 445/139) whose peer is this client
+    ss -K -t "( sport = :445 or sport = :139 ) and dst = $ip" >/dev/null 2>&1
+    logger -t pxe-dhcp-hook "cleared stale SMB state for $1 $ip ($mac${host:+ $host})"
+}
+
 case "$action" in
     add|del)
-        /usr/sbin/conntrack -D -s "$ip" >/dev/null 2>&1
-        /usr/sbin/conntrack -D -d "$ip" >/dev/null 2>&1
-        /usr/bin/ss -K "dst = $ip"  >/dev/null 2>&1
-        /usr/bin/ss -K "src = $ip"  >/dev/null 2>&1
-        logger -t pxe-dhcp-hook "cleared stale state for $action $ip ($mac${host:+ $host})"
+        clear_state "$action"
+        ;;
+    old)
+        case "${DNSMASQ_VENDOR_CLASS:-}" in
+            PXEClient*) clear_state "old (network boot, ${DNSMASQ_VENDOR_CLASS%%:UNDI*})" ;;
+        esac
         ;;
 esac
 

playbook/pxe-server-helpers/pxe-netplan-apply.sh

@@ -0,0 +1,516 @@
+#!/bin/bash
+# pxe-netplan-apply.sh - install the PXE server's netplan config without
+# ever leaving the box unreachable on the corporate side.
+#
+# Usage:
+#   pxe-netplan-apply.sh STAGED_YAML PXE_NAME PXE_MAC [CORP_NAME CORP_MAC]
+#   pxe-netplan-apply.sh --preflight STAGED_YAML PXE_NAME PXE_MAC [CORP_NAME CORP_MAC]
+#   pxe-netplan-apply.sh --revert BACKUP_DIR      (the auto-revert timer)
+#
+# Without CORP_NAME/CORP_MAC (corp_nic_mac empty in the playbook) only the
+# imaging NIC is pinned and renamed; the other wired ports are catch-all
+# DHCP clients that keep their names. Every pre-flight refusal about the
+# imaging NIC applies the same.
+#
+# Env (set by pxe_server_setup.yml):
+#   PXE_SUBNET      imaging LAN, e.g. 172.16.9.0/24 (SSH peers inside it may
+#                   legitimately come in on the imaging NIC)
+#   PXE_SSH_CLIENT  IP of the admin's SSH client ($SSH_CONNECTION field 1);
+#                   every established sshd peer is checked as well
+#   PXE_NETPLAN_REVERT_AFTER  seconds before the auto-revert fires (120)
+#   PXE_NETPLAN_CORP_WAIT     seconds to wait for the corp IPv4 again (30)
+#
+# Steps (apply):
+#   1. validate STAGED_YAML in a scratch root (netplan generate --root-dir);
+#      nothing on the box changes if it is invalid
+#   2. stop here (UNCHANGED) if it is already installed, no other file
+#      configures wired NICs, and both NICs carry their stable names
+#   3. pre-flight: REFUSE (exit 1, nothing changed) when the NIC that
+#      PXE_MAC names holds the default route, a DHCP lease, or the route to
+#      an SSH client outside PXE_SUBNET. That NIC becomes static with no
+#      gateway, so any of these means it is the corp-cabled one (swapped
+#      MACs) and applying would cut the admin off.
+#   4. back up /etc/netplan to /var/backups/netplan-<timestamp>/, record the
+#      current NIC names, and arm an auto-revert (systemd-run timer) that
+#      restores the backup unless step 8 cancels it
+#   5. install it (other wired configs moved aside), netplan generate
+#   6. rename the NICs to their stable names (the .link files netplan
+#      writes do it on every later boot)
+#   7. netplan apply
+#   8. check: both names present, the imaging NIC has its IPv4, the corp
+#      NIC has IPv4 again if it had one before (PXE_NETPLAN_CORP_WAIT s),
+#      SSH clients still route out of the corp side; then cancel the revert
+# Any failure in 5-8 restores the backup AND the previous NIC names, then
+# exits 1. Prints CHANGED / UNCHANGED (or NEEDED for --preflight) as the
+# last line.
+
+set -u
+
+NETPLAN_DIR=${NETPLAN_DIR:-/etc/netplan}
+SYSFS_NET=${SYSFS_NET:-/sys/class/net}
+BACKUP_ROOT=${BACKUP_ROOT:-/var/backups}
+LEASE_DIR=${LEASE_DIR:-/run/systemd/netif/leases}
+LOCK_FILE=${LOCK_FILE:-/run/pxe-netplan-apply.lock}
+REVERT_AFTER=${PXE_NETPLAN_REVERT_AFTER:-120}
+CORP_WAIT=${PXE_NETPLAN_CORP_WAIT:-30}
+PXE_WAIT=${PXE_NETPLAN_PXE_WAIT:-20}
+TARGET=$NETPLAN_DIR/50-cloud-init.yaml
+SELF=$(readlink -f "$0")
+
+log() { echo "pxe-netplan-apply: $*"; }
+
+# --- NIC helpers -------------------------------------------------------------
+
+# Name of the physical NIC that has MAC $1 (empty if none).
+iface_of() {
+    local d
+    for d in "$SYSFS_NET"/*; do
+        [ -e "$d/device" ] || continue
+        if [ "$(cat "$d/address" 2>/dev/null)" = "$1" ]; then
+            basename "$d"
+            return 0
+        fi
+    done
+    return 0
+}
+
+has_v4() {
+    ip -4 -o addr show dev "$1" scope global 2>/dev/null | grep -q ' inet '
+}
+
+default_route_devs() {
+    { ip -4 route show default; ip -6 route show default; } 2>/dev/null |
+        awk '{for (i = 1; i < NF; i++) if ($i == "dev") print $(i + 1)}' | sort -u
+}
+
+# DHCP-assigned address (networkd and NetworkManager both flag those
+# "dynamic"), or a networkd lease file for the link.
+has_dhcp_lease() {
+    local idx
+    ip -o addr show dev "$1" 2>/dev/null | grep -qw dynamic && return 0
+    idx=$(cat "$SYSFS_NET/$1/ifindex" 2>/dev/null)
+    [ -n "$idx" ] && [ -s "$LEASE_DIR/$idx" ] && return 0
+    return 1
+}
+
+route_dev() {
+    ip -o route get "$1" 2>/dev/null |
+        awk '{for (i = 1; i < NF; i++) if ($i == "dev") {print $(i + 1); exit}}'
+}
+
+ip2int() {
+    local a b c d
+    [[ "$1" =~ ^([0-9]+)\.([0-9]+)\.([0-9]+)\.([0-9]+)$ ]] || return 1
+    a=${BASH_REMATCH[1]} b=${BASH_REMATCH[2]} c=${BASH_REMATCH[3]} d=${BASH_REMATCH[4]}
+    echo $(( (a << 24) | (b << 16) | (c << 8) | d ))
+}
+
+in_subnet() {
+    local ipn netn len mask
+    [ -n "${2:-}" ] || return 1
+    ipn=$(ip2int "$1") || return 1
+    netn=$(ip2int "${2%/*}") || return 1
+    len=${2#*/}
+    [[ "$len" =~ ^[0-9]+$ ]] && [ "$len" -le 32 ] || return 1
+    mask=$(( len == 0 ? 0 : (0xFFFFFFFF << (32 - len)) & 0xFFFFFFFF ))
+    [ $(( ipn & mask )) -eq $(( netn & mask )) ]
+}
+
+# Admin SSH clients: PXE_SSH_CLIENT, our own SSH_CONNECTION, and every
+# established peer of sshd (port 22). IPv4-mapped IPv6 is unwrapped.
+ssh_peers() {
+    {
+        [ -n "${PXE_SSH_CLIENT:-}" ] && echo "$PXE_SSH_CLIENT"
+        [ -n "${SSH_CONNECTION:-}" ] && echo "${SSH_CONNECTION%% *}"
+        ss -Htn state established '( sport = :22 )' 2>/dev/null | awk '{print $NF}' |
+            sed -E 's/:[0-9]+$//; s/^\[//; s/\]$//'
+    } | sed -E 's/^::ffff://' | grep -E '^[0-9a-fA-F.:]+$' | sort -u
+}
+
+# --- pre-flight --------------------------------------------------------------
+
+# 0 = safe to apply. Prints every reason it is not.
+preflight() {
+    local pif cif peer dev bad=0
+    pif=$(iface_of "$PXE_MAC")
+    if [ -z "$pif" ]; then
+        log "REFUSED: no physical NIC has pxe_nic_mac $PXE_MAC"
+        return 1
+    fi
+    if [ -n "$CORP_MAC" ]; then
+        cif=$(iface_of "$CORP_MAC")
+        if [ -z "$cif" ]; then
+            log "REFUSED: no physical NIC has corp_nic_mac $CORP_MAC"
+            return 1
+        fi
+    fi
+    if default_route_devs | grep -qxF "$pif"; then
+        log "REFUSED: $pif (pxe_nic_mac $PXE_MAC) holds the default route"
+        bad=1
+    fi
+    if has_dhcp_lease "$pif"; then
+        log "REFUSED: $pif (pxe_nic_mac $PXE_MAC) has a DHCP lease"
+        bad=1
+    fi
+    while IFS= read -r peer; do
+        [ -n "$peer" ] || continue
+        dev=$(route_dev "$peer")
+        [ "$dev" = "$pif" ] || continue
+        if in_subnet "$peer" "${PXE_SUBNET:-}"; then
+            continue    # an admin on the imaging LAN keeps 172.16.9.1
+        fi
+        log "REFUSED: the SSH client $peer is reached through $pif (pxe_nic_mac $PXE_MAC)"
+        bad=1
+    done < <(ssh_peers)
+    if [ "$bad" -ne 0 ]; then
+        log "The NIC named by pxe_nic_mac looks like the GE corporate one: the MACs are"
+        log "probably swapped, or the cables are. It would become"
+        log "static ${PXE_SUBNET:-imaging} with no gateway and cut this box off. Nothing was changed."
+        log "NICs now: $(for d in "$SYSFS_NET"/*; do [ -e "$d/device" ] && printf '%s=%s ' "$(basename "$d")" "$(cat "$d/address" 2>/dev/null)"; done)"
+        return 1
+    fi
+    return 0
+}
+
+# --- renaming ----------------------------------------------------------------
+
+link_rename() {
+    local cur=$1 new=$2
+    log "renaming $cur to $new"
+    if ip link set dev "$cur" down &&
+       ip link set dev "$cur" name "$new" &&
+       ip link set dev "$new" up; then
+        return 0
+    fi
+    log "ERROR: rename $cur -> $new failed"
+    ip link set dev "$cur" up 2>/dev/null
+    ip link set dev "$new" up 2>/dev/null
+    return 1
+}
+
+# set_names MAC1 NAME1 [MAC2 NAME2]: give each MAC its name. A NIC that must
+# change goes through a temporary name first, so a swap (pxe0 <-> corp0)
+# works in both directions. Temporary names carry this run's PID, so they
+# never collide with a name left over from an earlier (failed) pass. A pair
+# with an empty MAC or name is skipped (no pinned GE NIC).
+set_names() {
+    local -a macs=() want=() cur=()
+    local i
+    while [ $# -ge 2 ]; do
+        if [ -n "$1" ] && [ -n "$2" ]; then
+            macs+=("$1"); want+=("$2")
+        fi
+        shift 2
+    done
+    RENAME_SEQ=$(( ${RENAME_SEQ:-0} + 1 ))
+    for i in "${!macs[@]}"; do
+        cur[i]=$(iface_of "${macs[i]}")
+        if [ -z "${cur[i]}" ]; then
+            log "ERROR: no NIC with MAC ${macs[i]}"
+            return 1
+        fi
+    done
+    for i in "${!macs[@]}"; do
+        [ "${cur[i]}" = "${want[i]}" ] && continue
+        link_rename "${cur[i]}" "pxt$$-$RENAME_SEQ$i" || return 1
+        cur[i]=pxt$$-$RENAME_SEQ$i
+    done
+    for i in "${!macs[@]}"; do
+        [ "${cur[i]}" = "${want[i]}" ] && continue
+        link_rename "${cur[i]}" "${want[i]}" || return 1
+    done
+    for i in "${!macs[@]}"; do
+        if [ "$(iface_of "${macs[i]}")" != "${want[i]}" ]; then
+            log "ERROR: MAC ${macs[i]} is not named ${want[i]} after renaming"
+            return 1
+        fi
+    done
+    return 0
+}
+
+names_ok() {
+    [ "$(iface_of "$PXE_MAC")" = "$PXE_NAME" ] || return 1
+    if [ -n "$CORP_MAC" ]; then
+        [ "$(iface_of "$CORP_MAC")" = "$CORP_NAME" ]
+    else
+        [ -z "$(stray_names)" ]
+    fi
+}
+
+# No pinned GE NIC: "MAC NAME" for every other physical NIC whose name the
+# catch-all (en*, eth*) would not match - the previous imaging NIC still
+# called pxe0 after a re-pick, or corp0 from a pinned config. Each gets the
+# kernel-style MAC name enx<mac>, so it becomes a catch-all DHCP client and
+# pxe0 is free for the new imaging NIC.
+stray_names() {
+    local d n m
+    [ -z "$CORP_MAC" ] || return 0
+    for d in "$SYSFS_NET"/*; do
+        [ -e "$d/device" ] || continue
+        n=${d##*/}
+        m=$(cat "$d/address" 2>/dev/null)
+        [ "$m" = "$PXE_MAC" ] && continue
+        [ "$(cat "$d/type" 2>/dev/null)" = 1 ] || continue
+        [ -e "$d/wireless" ] || [ -e "$d/phy80211" ] || [ -e "$d/bridge" ] && continue
+        case "$n" in en*|eth*) continue ;; esac
+        echo "$m enx${m//:/}"
+    done
+    return 0
+}
+
+# MACs of the physical NICs other than the imaging one that hold a DHCP
+# (dynamic) IPv4: the GE side. They must have one again after the apply,
+# or an admin on the GE side may have been cut off. Static addresses (the
+# previous imaging NIC's 172.16.9.1) do not count. By MAC: names change.
+other_v4_macs() {
+    local d n m
+    for d in "$SYSFS_NET"/*; do
+        [ -e "$d/device" ] || continue
+        n=${d##*/}
+        m=$(cat "$d/address" 2>/dev/null)
+        [ "$m" = "$PXE_MAC" ] && continue
+        ip -4 -o addr show dev "$n" scope global dynamic 2>/dev/null | grep -q ' inet ' && echo "$m"
+    done
+    return 0
+}
+
+# --- backup / restore --------------------------------------------------------
+
+# Other netplan files that configure wired NICs (installer leftovers, an
+# en* DHCP match): they would put a second config on the two NICs. Files
+# without "ethernets" (WiFi, NetworkManager wifi profiles) are left alone.
+other_files() {
+    find "$NETPLAN_DIR" -maxdepth 1 -type f \( -name '*.yaml' -o -name '*.yml' \) \
+        ! -path "$TARGET" -exec grep -l 'ethernets' {} + 2>/dev/null | sort
+}
+
+# State of one apply, next to (not inside) the backup, so restoring the
+# backup never copies it into /etc/netplan.
+write_state() {
+    {
+        echo "NETPLAN_DIR=$NETPLAN_DIR"
+        echo "PXE_MAC=$PXE_MAC"
+        echo "ORIG_PXE_IF=$ORIG_PXE_IF"
+        echo "CORP_MAC=$CORP_MAC"
+        echo "ORIG_CORP_IF=$ORIG_CORP_IF"
+        echo "EXTRA=$EXTRA"
+    } >"$BACKUP.state"
+}
+
+read_state() {
+    local k v
+    while IFS='=' read -r k v; do
+        case "$k" in
+            NETPLAN_DIR) [[ "$v" =~ ^/[A-Za-z0-9/._-]*$ ]] && NETPLAN_DIR=$v ;;
+            PXE_MAC|CORP_MAC) [[ "$v" =~ ^([0-9a-f]{2}:){5}[0-9a-f]{2}$ ]] && printf -v "$k" '%s' "$v" ;;
+            ORIG_PXE_IF|ORIG_CORP_IF) [[ "$v" =~ ^[A-Za-z0-9._-]{0,15}$ ]] && printf -v "$k" '%s' "$v" ;;
+            EXTRA) [[ "$v" =~ ^(([0-9a-f]{2}:){5}[0-9a-f]{2}=[A-Za-z0-9._-]{1,15},?)*$ ]] && EXTRA=$v ;;
+        esac
+    done <"$BACKUP.state"
+    TARGET=$NETPLAN_DIR/50-cloud-init.yaml
+}
+
+cancel_revert() {
+    [ -n "${REVERT_UNIT:-}" ] || return 0
+    systemctl stop "$REVERT_UNIT.timer" "$REVERT_UNIT.service" >/dev/null 2>&1
+    if systemctl is-active --quiet "$REVERT_UNIT.timer" 2>/dev/null; then
+        log "WARNING: could not cancel $REVERT_UNIT.timer (the committed marker still stops it)"
+    fi
+}
+
+# Put the backed-up config AND the previous NIC names back.
+restore() {
+    local rc=0
+    log "restoring the previous config from $BACKUP"
+    find "$NETPLAN_DIR" -maxdepth 1 -type f \( -name '*.yaml' -o -name '*.yml' \) -delete
+    cp -a "$BACKUP/." "$NETPLAN_DIR/"
+    if [ -n "${ORIG_PXE_IF:-}" ]; then
+        local -a back=()
+        local pair
+        for pair in ${EXTRA//,/ }; do back+=("${pair%%=*}" "${pair#*=}"); done
+        set_names "$PXE_MAC" "$ORIG_PXE_IF" "$CORP_MAC" "${ORIG_CORP_IF:-}" "${back[@]}" ||
+            { log "ERROR: could not put the previous NIC names back"; rc=1; }
+    fi
+    netplan generate && netplan apply || { log "ERROR: netplan apply of the restored config failed"; rc=1; }
+    touch "$BACKUP.reverted"
+    return $rc
+}
+
+fail() {
+    log "ERROR: $*"
+    restore
+    cancel_revert
+    log "the previous config is back in place; nothing applied"
+    exit 1
+}
+
+# --- modes -------------------------------------------------------------------
+
+MODE=apply
+case "${1:-}" in
+    --preflight) MODE=preflight; shift ;;
+    --revert)
+        [ $# -eq 2 ] || { echo "usage: $0 --revert BACKUP_DIR" >&2; exit 2; }
+        BACKUP=${2%/}
+        [ -d "$BACKUP" ] && [ -f "$BACKUP.state" ] || { log "revert: no backup/state at $BACKUP"; exit 1; }
+        exec 9>"$LOCK_FILE"
+        flock -w 600 9 || log "revert: lock still held after 600 s; reverting anyway"
+        if [ -e "$BACKUP.committed" ] || [ -e "$BACKUP.reverted" ]; then
+            log "revert: $BACKUP already committed or reverted; nothing to do"
+            exit 0
+        fi
+        PXE_MAC="" CORP_MAC="" ORIG_PXE_IF="" ORIG_CORP_IF="" EXTRA=""
+        read_state
+        log "revert: the apply was not confirmed within its window"
+        restore
+        exit $?
+        ;;
+esac
+
+if [ $# -ne 3 ] && [ $# -ne 5 ]; then
+    echo "usage: $0 [--preflight] STAGED_YAML PXE_NAME PXE_MAC [CORP_NAME CORP_MAC]" >&2
+    exit 2
+fi
+STAGED=$1
+PXE_NAME=$2
+PXE_MAC=${3,,}
+CORP_NAME=${4:-}
+CORP_MAC=${5:-}
+CORP_MAC=${CORP_MAC,,}
+
+# 1. validate in a scratch root
+SCRATCH=$(mktemp -d)
+trap 'rm -rf "$SCRATCH"' EXIT
+mkdir -p "$SCRATCH/etc/netplan"
+install -m 600 "$STAGED" "$SCRATCH/etc/netplan/50-cloud-init.yaml"
+if ! netplan generate --root-dir "$SCRATCH"; then
+    log "ERROR: $STAGED does not validate; nothing changed"
+    exit 1
+fi
+
+# 2. already in place?
+if cmp -s "$STAGED" "$TARGET" && [ -z "$(other_files)" ] && names_ok; then
+    log "netplan already in place, $PXE_NAME${CORP_NAME:+ and $CORP_NAME} present"
+    echo UNCHANGED
+    exit 0
+fi
+
+# 3. pre-flight
+if ! preflight; then
+    exit 1
+fi
+if [ "$MODE" = preflight ]; then
+    log "pre-flight passed; the netplan config would change"
+    echo NEEDED
+    exit 0
+fi
+
+exec 9>"$LOCK_FILE"
+flock -w 60 9 || { log "ERROR: another pxe-netplan-apply holds $LOCK_FILE; nothing changed"; exit 1; }
+
+# 4. back up, record names, arm the auto-revert
+ORIG_PXE_IF=$(iface_of "$PXE_MAC")
+ORIG_CORP_IF=""
+[ -n "$CORP_MAC" ] && ORIG_CORP_IF=$(iface_of "$CORP_MAC")
+CORP_HAD_V4=0
+[ -n "$ORIG_CORP_IF" ] && has_v4 "$ORIG_CORP_IF" && CORP_HAD_V4=1
+OTHERS_V4=""
+[ -z "$CORP_MAC" ] && OTHERS_V4=$(other_v4_macs)
+# NICs to move off a name the catch-all would not match, recorded with
+# their current names for the revert ("mac=name,...").
+EXTRA=""
+FREE=()
+while read -r m newname; do
+    [ -n "$m" ] || continue
+    EXTRA="${EXTRA:+$EXTRA,}$m=$(iface_of "$m")"
+    FREE+=("$m" "$newname")
+done < <(stray_names)
+BACKUP=$BACKUP_ROOT/netplan-$(date +%Y%m%d-%H%M%S)
+mkdir -p "$BACKUP"
+cp -a "$NETPLAN_DIR/." "$BACKUP/"
+write_state
+log "previous config saved in $BACKUP (NICs: $ORIG_PXE_IF${ORIG_CORP_IF:+, $ORIG_CORP_IF})"
+
+REVERT_UNIT=""
+if [ "$REVERT_AFTER" -gt 0 ] 2>/dev/null && command -v systemd-run >/dev/null; then
+    REVERT_UNIT=pxe-netplan-revert-$(basename "$BACKUP" | tr -cd 'A-Za-z0-9-')
+    if systemd-run --quiet --unit="$REVERT_UNIT" --on-active="$REVERT_AFTER" \
+        --timer-property=AccuracySec=1s "$SELF" --revert "$BACKUP"; then
+        log "auto-revert armed: $REVERT_UNIT.timer restores $BACKUP in ${REVERT_AFTER}s unless this run confirms"
+    else
+        log "WARNING: could not arm the auto-revert timer; relying on the in-script checks"
+        REVERT_UNIT=""
+    fi
+else
+    log "WARNING: auto-revert off (no systemd-run or PXE_NETPLAN_REVERT_AFTER=0)"
+fi
+
+# An SSH drop (HUP) must not stop us half-way; TERM/INT restore.
+trap '' HUP
+trap 'fail "interrupted"' INT TERM
+
+# 5. install, moving aside the other wired configs (an en* DHCP match would
+#    put a DHCP client on the imaging NIC too)
+while IFS= read -r f; do
+    [ -n "$f" ] || continue
+    log "moving aside $f (copy in $BACKUP)"
+    rm -f "$f"
+done < <(other_files)
+install -m 600 "$STAGED" "$TARGET"
+netplan generate || fail "netplan generate failed"
+
+# 6. stable names now, so dnsmasq/UFW/Samba (which use them) work before
+#    the next reboot. Does not depend on the netplan version renaming.
+[ ${#FREE[@]} -gt 0 ] && log "freeing names for the catch-all: $EXTRA"
+set_names "$PXE_MAC" "$PXE_NAME" "$CORP_MAC" "$CORP_NAME" "${FREE[@]}" || fail "NIC rename failed"
+
+# 7. apply
+netplan apply || fail "netplan apply failed"
+
+# 8. check
+names_ok || fail "$PXE_NAME${CORP_NAME:+ / $CORP_NAME} not on MAC $PXE_MAC${CORP_MAC:+ / $CORP_MAC} after apply"
+ok=0
+for _ in $(seq 1 "$PXE_WAIT"); do
+    if has_v4 "$PXE_NAME"; then ok=1; break; fi
+    sleep 1
+done
+[ "$ok" -eq 1 ] || fail "$PXE_NAME has no IPv4 address after ${PXE_WAIT}s"
+for m in $OTHERS_V4; do
+    ok=0
+    for _ in $(seq 1 "$CORP_WAIT"); do
+        n=$(iface_of "$m")
+        if [ -n "$n" ] && has_v4 "$n"; then ok=1; break; fi
+        sleep 1
+    done
+    [ "$ok" -eq 1 ] || fail "the NIC with MAC $m had a DHCP IPv4 before and has none after ${CORP_WAIT}s"
+done
+if [ -z "$CORP_MAC" ]; then
+    :
+elif [ "$CORP_HAD_V4" -eq 1 ]; then
+    ok=0
+    for _ in $(seq 1 "$CORP_WAIT"); do
+        if has_v4 "$CORP_NAME"; then ok=1; break; fi
+        sleep 1
+    done
+    [ "$ok" -eq 1 ] || fail "$CORP_NAME had IPv4 before and has none after ${CORP_WAIT}s"
+elif ! has_v4 "$CORP_NAME"; then
+    log "WARNING: $CORP_NAME has no IPv4 address (it had none before either: corp cable unplugged or no DHCP)"
+fi
+while IFS= read -r peer; do
+    [ -n "$peer" ] || continue
+    dev=$(route_dev "$peer")
+    if [ "$dev" = "$PXE_NAME" ] && ! in_subnet "$peer" "${PXE_SUBNET:-}"; then
+        fail "the SSH client $peer now routes through $PXE_NAME"
+    fi
+    if [ -z "$dev" ]; then
+        fail "no route to the SSH client $peer after apply"
+    fi
+done < <(ssh_peers)
+
+touch "$BACKUP.committed"
+cancel_revert
+trap - INT TERM
+ip -br addr show dev "$PXE_NAME" 2>/dev/null
+[ -n "$CORP_NAME" ] && ip -br addr show dev "$CORP_NAME" 2>/dev/null
+echo CHANGED
+exit 0

playbook/pxe-server-helpers/pxe-nic-carrier

@@ -0,0 +1,145 @@
+#!/bin/bash
+#
+# pxe-nic-carrier - re-check the imaging NIC whenever its cable moves.
+#
+# The dnsmasq guard (pxe-nic-check --guard) runs only when dnsmasq starts,
+# and the watch timer only every 5 min. If the imaging cable is moved into
+# a GE port while dnsmasq runs, dnsmasq would answer DHCP on the GE LAN
+# until the next watch. This hook closes that gap:
+#
+#   carrier lost   dnsmasq is stopped at once (if it was running) and a
+#                  marker remembers that this hook stopped it.
+#   carrier back   pxe-nic-carrier.service runs "pxe-nic-carrier --gain":
+#                  after a 2 s settle, if dnsmasq is running or the marker
+#                  is set, "systemctl restart dnsmasq" - its ExecStartPre
+#                  guard checks the NIC while dnsmasq is down and refuses
+#                  to start it on the GE network. Otherwise it only runs
+#                  the guard to refresh /run/pxe-nic-status.json. dnsmasq
+#                  that an operator or the watch stopped stays stopped.
+#
+# Only the imaging NIC (and, for a bridge, its ports) counts, as resolved
+# by "pxe-nic-check --print-imaging" from /etc/pxe-server/nic.conf or the
+# dnsmasq interface= pin. Events on any other NIC (the GE NIC) exit at
+# once and touch nothing. Link state is read from sysfs, not from the
+# event name, and remembered per interface, so the same transition seen
+# twice (carrier, then routable) acts once.
+#
+# Called by networkd-dispatcher with IFACE and STATE in the environment
+# (installed as /etc/networkd-dispatcher/<state>.d/50-pxe-nic-carrier for
+# carrier, degraded, degraded-carrier, enslaved, routable, no-carrier and
+# off), or by hand: pxe-nic-carrier IFACE. Logs: journalctl -t pxe-nic-carrier
+#
+# The dispatcher waits for this script, so the event path never runs a
+# check itself: loss is two systemctl calls, gain hands off to the service.
+
+set -u
+
+CHECK="${PXE_NIC_CHECK:-/usr/local/sbin/pxe-nic-check}"
+SYS_NET="${PXE_SYS_NET:-/sys/class/net}"
+RUN="${PXE_NIC_CARRIER_RUN:-/run/pxe-nic-carrier}"
+SYSTEMCTL="${PXE_SYSTEMCTL:-systemctl}"
+SETTLE="${PXE_NIC_CARRIER_SETTLE:-2}"
+GAIN_UNIT="pxe-nic-carrier.service"
+TAG="pxe-nic-carrier"
+
+PATH="${PATH:+$PATH:}/usr/local/sbin:/usr/sbin:/usr/bin:/sbin:/bin"
+
+log() {  # log PRIORITY MESSAGE
+    logger -t "$TAG" -p "daemon.$1" -- "$2" 2>/dev/null || \
+        echo "$TAG: $2" >&2
+}
+
+imaging_ifaces() {
+    "$CHECK" --print-imaging 2>/dev/null
+}
+
+carrier_of() {  # 1 if the interface has carrier, else 0 (down reads EINVAL)
+    local c
+    c=$(cat "$SYS_NET/$1/carrier" 2>/dev/null) || c=0
+    [ "$c" = 1 ] && echo 1 || echo 0
+}
+
+any_carrier() {  # any imaging interface or port with carrier
+    local i
+    for i in "$@"; do
+        [ "$(carrier_of "$i")" = 1 ] && return 0
+    done
+    return 1
+}
+
+dnsmasq_running() {  # active, starting or reloading
+    case "$("$SYSTEMCTL" is-active dnsmasq 2>/dev/null)" in
+        active|activating|reloading) return 0 ;;
+    esac
+    return 1
+}
+
+on_event() {
+    local iface="$1" list=() match="" i now prev
+    mapfile -t list < <(imaging_ifaces)
+    for i in "${list[@]}"; do
+        [ -n "$i" ] && [ "$i" = "$iface" ] && match=1
+    done
+    [ -n "$match" ] || exit 0        # not the imaging NIC: hands off
+
+    mkdir -p "$RUN" || exit 0
+    exec 9>"$RUN/event.lock"
+    flock -w 10 9 || log warning "lock busy, handling $iface anyway"
+
+    now=$(carrier_of "$iface")
+    prev=$(cat "$RUN/link.$iface" 2>/dev/null) || prev=unknown
+    echo "$now" > "$RUN/link.$iface"
+    [ "$now" = "$prev" ] && exit 0   # same state again: already handled
+
+    if [ "$now" = 0 ]; then
+        # an in-flight gain check must not restart dnsmasq after this
+        "$SYSTEMCTL" stop "$GAIN_UNIT" >/dev/null 2>&1
+        if dnsmasq_running; then
+            : > "$RUN/stopped-dnsmasq"
+            "$SYSTEMCTL" stop --no-block dnsmasq
+            log warning "carrier lost on imaging NIC $iface (${STATE:-event}): stopped dnsmasq; it restarts after the guard passes when the link returns"
+        else
+            log info "carrier lost on imaging NIC $iface (${STATE:-event}); dnsmasq not running"
+        fi
+    else
+        log notice "carrier up on imaging NIC $iface (${STATE:-event}, was $prev): re-checking before dnsmasq serves"
+        "$SYSTEMCTL" restart --no-block "$GAIN_UNIT"
+    fi
+    exit 0
+}
+
+on_gain() {
+    local list=() rc
+    sleep "$SETTLE"
+    mapfile -t list < <(imaging_ifaces)
+    if [ "${#list[@]}" -eq 0 ] || [ -z "${list[0]}" ]; then
+        log err "imaging NIC unknown, nothing to re-check"
+        exit 0
+    fi
+    if ! any_carrier "${list[@]}"; then
+        log info "imaging NIC ${list[0]} lost carrier again, nothing to do"
+        exit 0
+    fi
+    if dnsmasq_running || [ -e "$RUN/stopped-dnsmasq" ]; then
+        # restart = stop, then the ExecStartPre guard with dnsmasq down
+        "$SYSTEMCTL" restart dnsmasq
+        rc=$?
+        rm -f "$RUN/stopped-dnsmasq"
+        if [ "$rc" -eq 0 ]; then
+            log notice "imaging NIC ${list[0]}: guard passed, dnsmasq (re)started"
+        else
+            log crit "imaging NIC ${list[0]}: dnsmasq NOT started (guard refused or start failed, rc $rc); see journalctl -u dnsmasq. Fix the cabling, then systemctl start dnsmasq"
+        fi
+    else
+        "$CHECK" --guard >/dev/null 2>&1
+        rc=$?
+        log info "imaging NIC ${list[0]}: dnsmasq was not running, left stopped (guard rc $rc, status refreshed)"
+    fi
+    exit 0
+}
+
+case "${1:-}" in
+    --gain) on_gain ;;
+    -h|--help) sed -n '2,36p' "$0"; exit 0 ;;
+    *) on_event "${1:-${IFACE:-}}" ;;
+esac

playbook/pxe-server-helpers/pxe-nic-carrier.service

@@ -0,0 +1,16 @@
+# Started (never enabled) by pxe-nic-carrier, the networkd-dispatcher
+# hook, when the imaging NIC gets carrier back. Re-checks the imaging NIC
+# before dnsmasq serves again: if dnsmasq was running (or the hook stopped
+# it on carrier loss), "systemctl restart dnsmasq" so its ExecStartPre
+# guard decides; otherwise it only refreshes /run/pxe-nic-status.json.
+# The hook restarts this unit on every carrier gain and stops it on a
+# carrier loss, so the newest event wins.
+
+[Unit]
+Description=PXE NIC carrier change: re-check the imaging NIC before dnsmasq serves
+After=network.target
+
+[Service]
+Type=oneshot
+ExecStart=/usr/local/sbin/pxe-nic-carrier --gain
+TimeoutStartSec=120

playbook/pxe-server-helpers/pxe-nic-check.service

@@ -0,0 +1,17 @@
+# Periodic imaging-NIC watch (pxe-nic-check.timer runs this every 5 min).
+# Listens 60 s on each NIC, probes the imaging NIC for foreign DHCP, writes
+# /run/pxe-nic-status.json for the webapp, and STOPS dnsmasq if the imaging
+# NIC turns out to be on the GE network or next to another DHCP server.
+# It never starts dnsmasq: after fixing the cabling, start it by hand
+# (systemctl start dnsmasq), which re-runs the guard. If dnsmasq was
+# restarted inside the window it re-checks (~6 s) before stopping it.
+
+[Unit]
+Description=PXE NIC watch: keep dnsmasq off the GE corporate network
+After=network.target
+
+[Service]
+Type=oneshot
+ExecStart=/usr/local/sbin/pxe-nic-check --watch
+TimeoutStartSec=180
+Nice=5

playbook/pxe-server-helpers/pxe-nic-check.timer

@@ -0,0 +1,11 @@
+[Unit]
+Description=PXE NIC watch every 5 minutes
+
+[Timer]
+OnBootSec=2min
+OnActiveSec=1min
+OnUnitActiveSec=5min
+AccuracySec=15s
+
+[Install]
+WantedBy=timers.target

playbook/pxe-server-helpers/pxe-pick-nic

@@ -0,0 +1,297 @@
+#!/bin/bash
+# pxe-pick-nic - choose the imaging NIC by its cable, not by its MAC.
+#
+# Usage:
+#   sudo pxe-pick-nic          interactive: pull the imaging switch cable and
+#                              plug it back in; the port that blinked is it
+#   pxe-pick-nic --auto        for the first-boot playbook: the one wired
+#                              port with a link, if it is isolated
+#   pxe-pick-nic --show        print the saved choice
+#
+# The choice is saved in /etc/pxe-server/nic-pick.conf (imaging_mac=...).
+# The playbook uses it when site-vars.yml leaves pxe_nic_mac empty, and pins
+# that MAC from then on: the box never re-guesses at boot, so a moved cable
+# can never move 172.16.9.1 and DHCP onto another port.
+#
+# A port is accepted only when pxe-nic-check calls it "isolated": no GE
+# switch (LLDP/CDP), no 802.1X port authentication, and no other DHCP
+# server answering one DHCPDISCOVER. It listens CHECK_WINDOW seconds
+# (default 65: a Cisco switch sends CDP every 60 s). --auto also refuses a
+# port where more than ARP_MAX (default 10) hosts were heard: an imaging
+# switch at install time is nearly silent, a GE access VLAN is not, and
+# that holds even when the switch sends no LLDP/CDP and the probe is lost
+# (STP still listening). Anything else is refused and nothing is saved.
+# The check uses the site's corp_domain_suffixes and allowed_switches
+# (PXE_PICK_SUFFIXES / PXE_PICK_ALLOWED from the playbook, else
+# /etc/pxe-server/nic.conf), so a managed imaging switch can be allowed.
+#
+# Install rule for sites: during the install plug in ONLY the imaging
+# switch. Plug the GE cable into any other port afterwards; the catch-all
+# netplan entry makes it a DHCP client and dnsmasq never serves it.
+#
+# Exit: 0 chosen (or --show found one), 1 refused / could not choose,
+# 2 usage.
+
+set -u
+
+CONF=${PXE_PICK_CONF:-/etc/pxe-server/nic-pick.conf}
+HINT=${PXE_PICK_HINT:-/var/lib/pxe-firstboot/nic-hint}
+SYSFS_NET=${SYSFS_NET:-/sys/class/net}
+NIC_CHECK=${PXE_NIC_CHECK:-/usr/local/sbin/pxe-nic-check}
+CHECK_WINDOW=${CHECK_WINDOW:-65}
+ARP_MAX=${PXE_PICK_ARP_MAX:-10}
+NIC_CONF=${PXE_NIC_CONF:-/etc/pxe-server/nic.conf}
+SETTLE=${PXE_PICK_SETTLE:-8}
+WAIT=${PXE_PICK_WAIT:-180}
+
+log() { echo "pxe-pick-nic: $*"; }
+
+# Physical wired Ethernet ports: a device behind them, ARP type 1, not
+# wireless, not a bridge.
+wired() {
+    local d n
+    for d in "$SYSFS_NET"/*; do
+        n=${d##*/}
+        [ -e "$d/device" ] || continue
+        [ "$(cat "$d/type" 2>/dev/null)" = 1 ] || continue
+        [ -e "$d/wireless" ] || [ -e "$d/phy80211" ] && continue
+        [ -e "$d/bridge" ] && continue
+        echo "$n"
+    done
+}
+
+mac_of() { cat "$SYSFS_NET/$1/address" 2>/dev/null; }
+
+# 1 = link, 0 = none. carrier is unreadable while the port is admin-down.
+carrier() { [ "$(cat "$SYSFS_NET/$1/carrier" 2>/dev/null)" = 1 ] && echo 1 || echo 0; }
+
+# Bring every wired port up (no address is added) so its link can be seen.
+links_up() {
+    local n up=0
+    for n in $(wired); do
+        if ! ip link show dev "$n" 2>/dev/null | grep -q '[<,]UP[,>]'; then
+            ip link set dev "$n" up 2>/dev/null && up=1
+        fi
+    done
+    [ "$up" -eq 1 ] && sleep "$SETTLE"
+    return 0
+}
+
+table() {
+    local n
+    for n in $(wired); do
+        printf '    %-16s %s  link %s\n' "$n" "$(mac_of "$n")" \
+            "$([ "$(carrier "$n")" = 1 ] && echo up || echo down)"
+    done
+}
+
+# A pxe-nic-check config with only the site settings that matter here
+# (never the MAC keys: the port under test is given with --iface).
+check_config() {
+    local f=$1 suffixes=${PXE_PICK_SUFFIXES:-} allowed=${PXE_PICK_ALLOWED:-}
+    if [ -z "$suffixes$allowed" ] && [ -f "$NIC_CONF" ]; then
+        suffixes=$(sed -n 's/^[[:space:]]*corp_domain_suffixes[[:space:]]*=[[:space:]]*//p' "$NIC_CONF" | tail -1)
+        allowed=$(sed -n 's/^[[:space:]]*allowed_switches[[:space:]]*=[[:space:]]*//p' "$NIC_CONF" | tail -1)
+    fi
+    {
+        echo "[nic]"
+        [ -n "$suffixes" ] && echo "corp_domain_suffixes = $suffixes"
+        [ -n "$allowed" ] && echo "allowed_switches = $allowed"
+    } >"$f"
+}
+
+# check IFACE [strict]: prints the verdict, returns 0 only for "isolated"
+# (with strict, also only when at most ARP_MAX hosts were heard).
+check() {
+    local out verdict arp why cfg
+    if [ ! -f "$NIC_CHECK" ]; then
+        log "ERROR: $NIC_CHECK not found"
+        return 1
+    fi
+    cfg=$(mktemp)
+    check_config "$cfg"
+    log "checking $1 is isolated: listening ${CHECK_WINDOW}s for GE switches and DHCP servers..."
+    out=$(python3 "$NIC_CHECK" --iface "$1" --probe --window "$CHECK_WINDOW" --json --config "$cfg" 2>/dev/null)
+    rm -f "$cfg"
+    read -r verdict arp why < <(python3 -c '
+import json, sys
+try:
+    e = json.load(sys.stdin)["interfaces"][0]
+    ev = "; ".join(x for x in e["evidence"] if not x.endswith("ARP hosts seen"))
+    print(e["verdict"], int(e.get("arp_hosts") or 0), ev or "-")
+except Exception as ex:
+    print("error", 0, "pxe-nic-check gave no usable result: %s" % ex)
+' <<<"$out")
+    if [ "$verdict" = isolated ]; then
+        if [ "$arp" -gt "$ARP_MAX" ]; then
+            log "$1: isolated by its switch and DHCP, but $arp hosts were heard (more than $ARP_MAX)"
+            if [ "${2:-}" = strict ]; then
+                log "REFUSED: a busy LAN is not an imaging switch at install time; it may be a GE port"
+                log "with LLDP/CDP off. Pick it by its cable (sudo pxe-pick-nic) or set pxe_nic_mac."
+                return 1
+            fi
+            log "WARNING: make sure this is the imaging switch, not a GE port with LLDP/CDP turned off."
+        else
+            log "$1: isolated (no GE switch, no 802.1X, no other DHCP server, $arp hosts heard)"
+        fi
+        return 0
+    fi
+    log "$1: verdict $verdict: $why"
+    case "$verdict" in
+        ge) log "That port is on the GE network (or a managed switch not in allowed_switches). It must never be the imaging port." ;;
+        foreign-dhcp) log "Another DHCP server answers on that port (a second PXE server, or a routed LAN)." ;;
+        no-link) log "That port lost its link during the check." ;;
+    esac
+    return 1
+}
+
+save() {
+    local n=$1 mac
+    mac=$(mac_of "$n")
+    mkdir -p "$(dirname "$CONF")"
+    {
+        echo "# Written by pxe-pick-nic $(date -Is). The imaging NIC; the playbook"
+        echo "# pins it when site-vars.yml leaves pxe_nic_mac empty."
+        echo "imaging_mac=$mac"
+        echo "picked_iface=$n"
+    } >"$CONF.tmp" && mv "$CONF.tmp" "$CONF"
+    rm -f "$HINT"
+    log "saved: imaging NIC = $n ($mac) in $CONF"
+}
+
+hint() {
+    mkdir -p "$(dirname "$HINT")" 2>/dev/null
+    { printf '%s\n' "$*" >"$HINT"; } 2>/dev/null
+}
+
+saved_mac() {
+    sed -n 's/^imaging_mac=\(\([0-9a-f]\{2\}:\)\{5\}[0-9a-f]\{2\}\)$/\1/p' "$CONF" 2>/dev/null | tail -1
+}
+
+# --- modes ---------------------------------------------------------------------
+
+mode_show() {
+    local mac
+    mac=$(saved_mac)
+    [ -n "$mac" ] || { log "no saved choice in $CONF"; return 1; }
+    echo "$mac"
+}
+
+mode_auto() {
+    local mac n with=() names
+    mac=$(saved_mac)
+    if [ -n "$mac" ]; then
+        for n in $(wired); do
+            if [ "$(mac_of "$n")" = "$mac" ]; then
+                log "using the saved choice: $n ($mac)"
+                echo "$mac"
+                return 0
+            fi
+        done
+        log "the saved imaging NIC $mac is not on this box any more"
+        hint "The saved imaging NIC $mac is gone (dongle replaced?). Log in and run: sudo pxe-pick-nic"
+        return 1
+    fi
+    links_up
+    for n in $(wired); do
+        [ "$(carrier "$n")" = 1 ] && with+=("$n")
+    done
+    log "wired ports:"
+    table
+    if [ ${#with[@]} -eq 0 ]; then
+        log "REFUSED: no wired port has a link. Plug the imaging switch into the port to use."
+        hint "Could not pick the imaging port: no port has a link. Plug in the imaging switch, then log in and run: sudo pxe-pick-nic"
+        return 1
+    fi
+    if [ ${#with[@]} -gt 1 ]; then
+        names="${with[*]}"
+        log "REFUSED: ${#with[@]} ports have a link ($names). During the install only the imaging switch may be plugged in."
+        hint "Could not pick the imaging port: ${#with[@]} ports have a link ($names). Log in and run: sudo pxe-pick-nic"
+        return 1
+    fi
+    n=${with[0]}
+    if ! check "$n" strict; then
+        hint "Could not pick the imaging port: $n is not isolated (see /var/log/first-boot.log). Plug only the imaging switch in, then log in and run: sudo pxe-pick-nic"
+        return 1
+    fi
+    save "$n" >&2
+    mac_of "$n"
+}
+
+# Wait until exactly one port changes its link; print "NAME NEWSTATE".
+wait_change() {
+    local -A before=()
+    local n t=0 changed=()
+    for n in $(wired); do before[$n]=$(carrier "$n"); done
+    while [ "$t" -lt $((WAIT * 2)) ]; do
+        sleep 0.5
+        t=$((t + 1))
+        changed=()
+        for n in "${!before[@]}"; do
+            [ "$(carrier "$n")" != "${before[$n]}" ] && changed+=("$n")
+        done
+        if [ ${#changed[@]} -eq 1 ]; then
+            sleep 1   # a flapping connector settles
+            n=${changed[0]}
+            echo "$n $(carrier "$n")"
+            return 0
+        fi
+        if [ ${#changed[@]} -gt 1 ]; then
+            log "more than one port changed (${changed[*]}); move one cable at a time" >&2
+            return 1
+        fi
+    done
+    log "nothing changed in ${WAIT}s" >&2
+    return 1
+}
+
+mode_interactive() {
+    local n state again ans
+    [ -t 0 ] || { log "interactive mode needs a terminal (use --auto from scripts)"; return 2; }
+    [ "$(id -u)" -eq 0 ] || { log "run it as root: sudo pxe-pick-nic"; return 2; }
+    links_up
+    echo
+    echo "Pick the imaging NIC: the port cabled to the isolated imaging switch."
+    echo "Wired ports now:"
+    table
+    echo
+    echo "Pull the imaging switch cable out of this server now"
+    echo "(or, if it is not plugged in yet, plug it in now). Waiting up to ${WAIT}s..."
+    read -r n state < <(wait_change) || return 1
+    [ -n "${n:-}" ] || return 1
+    if [ "$state" = 0 ]; then
+        echo "$n lost its link. Plug the cable back into the SAME port..."
+        read -r again state < <(wait_change) || return 1
+        if [ "${again:-}" != "$n" ] || [ "$state" != 1 ]; then
+            log "expected $n to come back up, saw ${again:-nothing} $state; try again"
+            return 1
+        fi
+    fi
+    sleep "$SETTLE"
+    echo "Imaging port: $n ($(mac_of "$n"))"
+    check "$n" || { log "nothing saved"; return 1; }
+    read -rp "Use $n ($(mac_of "$n")) as the imaging NIC? [y/N] " ans
+    [[ "$ans" =~ ^[Yy]$ ]] || { log "nothing saved"; return 1; }
+    save "$n"
+    if [ -e /var/lib/pxe-firstboot.failed ] && [ -x /opt/first-boot.sh ]; then
+        read -rp "Run the server setup again now? [Y/n] " ans
+        if [[ ! "$ans" =~ ^[Nn]$ ]]; then
+            rm -f /var/lib/pxe-firstboot/attempts
+            /opt/first-boot.sh 2>&1 | tee -a /var/log/first-boot.log
+            return "${PIPESTATUS[0]}"
+        fi
+        echo "Run it later with: sudo rm -f /var/lib/pxe-firstboot/attempts; sudo /opt/first-boot.sh"
+    else
+        echo "Saved. If the server is already set up, re-run the playbook from the"
+        echo "installer USB to move the imaging config onto this port."
+    fi
+    return 0
+}
+
+case "${1:-}" in
+    --auto) mode_auto ;;
+    --show) mode_show ;;
+    "") mode_interactive ;;
+    -h|--help) sed -n '2,/^$/p' "$0" | sed 's/^# \{0,1\}//'; exit 0 ;;
+    *) echo "usage: $0 [--auto | --show]" >&2; exit 2 ;;
+esac

playbook/pxe-server-helpers/smb-soft-reset.sh

@@ -14,8 +14,8 @@
 # Step 2: restart nmbd         (NetBIOS daemon - separate from smbd)
 # Step 3: restart smbd         (full smbd restart, kills all child sessions)
 # Step 4: kill any leftover smbd child processes that survived restart
-# Step 5: flush conntrack for 10.9.100.0/24 (kernel connection tracking)
-# Step 6: flush ARP / neighbour cache on br-pxe
+# Step 5: flush conntrack for 172.16.9.0/24 (kernel connection tracking)
+# Step 6: flush ARP / neighbour cache
 # Step 7: drop TCP sockets on port 445 via ss -K
 # Step 8: restart dnsmasq      (DHCP/TFTP state as a last resort before reboot)
 
@@ -56,17 +56,17 @@ sleep 1
 systemctl start smbd 2>&1
 pause "Step 4 done"
 
-echo "=== Step 5/8: flush conntrack entries for 10.9.100.0/24 ==="
+echo "=== Step 5/8: flush conntrack entries for 172.16.9.0/24 ==="
 if command -v conntrack >/dev/null 2>&1; then
-    conntrack -D -s 10.9.100.0/24 2>&1 || true
-    conntrack -D -d 10.9.100.0/24 2>&1 || true
+    conntrack -D -s 172.16.9.0/24 2>&1 || true
+    conntrack -D -d 172.16.9.0/24 2>&1 || true
 else
     echo "  conntrack tool not installed - skipping (apt install conntrack)"
 fi
 pause "Step 5 done"
 
-echo "=== Step 6/8: flush ARP / neighbour cache on br-pxe ==="
-ip neigh flush dev br-pxe 2>&1 || ip neigh flush all 2>&1 || true
+echo "=== Step 6/8: flush ARP / neighbour cache ==="
+ip neigh flush all 2>&1 || true
 pause "Step 6 done"
 
 echo "=== Step 7/8: drop tcp sockets on port 445 ==="

playbook/scripts/preflight.ps1

@@ -0,0 +1,170 @@
+# preflight.ps1 - check the things PESetup fails on, before it fails on them.
+#
+# Called by startnet.cmd once the media is mapped. Prints a short report a tech
+# can read at the bay and exits non-zero if a check is fatal.
+#
+# WHY EACH CHECK IS HERE - all four come from PESetup's own behaviour
+# (docs/PESETUP-INTERNALS.md, decompiled 4.0.0.17, observed on 4.0.0.20):
+#
+#   Secure boot   GatherDataSelection fails the step outright when
+#                 SecurebootEnabled != 1. Hard failure, minutes into a build.
+#   Disk size     MinRequiredSpaceWithoutCompression is 128849018880 (120 GB).
+#   Driver match  GetDriverByModel returns null on a miss and PESetup logs a
+#                 WARNING and keeps going. The bay images with no drivers, so no
+#                 NIC, so DNS fails at first boot and enrollment cannot reach the
+#                 CDN. The symptom appears far from the cause - this is the check
+#                 that earns the script.
+#   Media age     The media expires 30 days after build. PESetup shows days-left
+#                 on a screen nobody reads.
+#
+# Lives on the enrollment share so it can be fixed without rebuilding boot.wim.
+
+[CmdletBinding()]
+param(
+    [string]$MediaDrive = 'Z:',
+    [int]$MinDiskGB = 120,
+    [int]$MediaWarnDays = 25
+)
+
+$ErrorActionPreference = 'Continue'
+$fatal = 0
+$warn  = 0
+
+function Ok   { param($m) Write-Host ("  [ OK ]   " + $m) }
+function Warn { param($m) Write-Host ("  [WARN]   " + $m); $script:warn++ }
+function Fail { param($m) Write-Host ("  [FAIL]   " + $m); $script:fatal++ }
+
+Write-Host ""
+Write-Host "======== Pre-imaging checks ========"
+
+# --- 1. Secure boot ------------------------------------------------------
+# Confirm-SecureBootUEFI is not always present in WinPE; read the state the
+# firmware exposes instead.
+try {
+    $sb = Get-ItemProperty -Path 'HKLM:\SYSTEM\CurrentControlSet\Control\SecureBoot\State' `
+                           -Name UEFISecureBootEnabled -ErrorAction Stop
+    if ($sb.UEFISecureBootEnabled -eq 1) {
+        Ok "Secure boot enabled"
+    } else {
+        Fail "Secure boot is OFF. PESetup will fail at GatherData. Enable it in BIOS."
+    }
+} catch {
+    Warn "Could not read secure boot state - if this is a legacy/CSM boot, PESetup will fail."
+}
+
+# --- 2. Disk size --------------------------------------------------------
+try {
+    $disk = Get-CimInstance Win32_DiskDrive -ErrorAction Stop |
+            Where-Object { $_.MediaType -like '*Fixed*' } |
+            Sort-Object Index | Select-Object -First 1
+    if ($disk) {
+        $gb = [math]::Round($disk.Size / 1GB, 1)
+        if ($gb -ge $MinDiskGB) {
+            Ok ("Disk 0 is {0} GB ({1})" -f $gb, $disk.Model)
+        } else {
+            Fail ("Disk 0 is only {0} GB; PESetup needs {1} GB. ({2})" -f $gb, $MinDiskGB, $disk.Model)
+        }
+    } else {
+        Fail "No fixed disk found. PESetup has nothing to image."
+    }
+} catch {
+    Warn "Could not enumerate disks: $_"
+}
+
+# --- 3. Driver match for THIS model --------------------------------------
+# Reimplements GetDriverByModel: family filter first (it knows only Latitude,
+# OptiPlex and Precision), then a substring test of comma-separated tokens,
+# first match wins. Tokens are NOT trimmed, matching the C#.
+try {
+    $model = (Get-CimInstance Win32_ComputerSystem -ErrorAction Stop).Model
+    $catalogue = Join-Path $MediaDrive 'Deploy\Control\HardwareDriver.json'
+    if (-not (Test-Path $catalogue)) {
+        Warn "HardwareDriver.json not found at $catalogue - cannot check drivers."
+    } else {
+        # NOT ConvertFrom-Json. HardwareDriver.json carries both casings of the
+        # same fields - "fileName" and "FileName", "destinationDir" and
+        # "DestinationDir". Windows PowerShell 5.1 (which is what WinPE runs)
+        # treats object keys case-insensitively and throws:
+        #   "cannot convert the JSON string because a dictionary that was
+        #    converted from the string contains the duplicated keys 'FileName'
+        #    and 'FileName'"
+        # -AsHashtable would handle it but that is PowerShell 6+. So pull the
+        # four fields we need out of each entry by text instead. Prefers the
+        # lowercase key, falls back to the capitalised one.
+        $raw = Get-Content $catalogue -Raw
+        $entries = @()
+        foreach ($chunk in ([regex]::Split($raw, '\}\s*,\s*\{'))) {
+            $get = {
+                param($names)
+                foreach ($n in $names) {
+                    $m = [regex]::Match($chunk, '"' + $n + '"\s*:\s*"((?:[^"\\]|\\.)*)"')
+                    if ($m.Success) { return $m.Groups[1].Value -replace '\\\\', '\' }
+                }
+                return ''
+            }
+            $e = [pscustomobject]@{
+                modelswminame  = (& $get @('modelswminame','models'))
+                family         = (& $get @('family'))
+                fileName       = (& $get @('fileName','FileName'))
+                destinationDir = (& $get @('destinationDir','DestinationDir'))
+            }
+            if ($e.modelswminame) { $entries += $e }
+        }
+        if (-not $entries.Count) {
+            Warn "Could not extract any entries from $catalogue - driver check skipped."
+        }
+        $family = ''
+        if ($model.ToUpper().Contains('LATITUDE'))  { $family = 'Latitude' }
+        if ($model.ToUpper().Contains('OPTIPLEX'))  { $family = 'Optiplex' }
+        if ($model.ToUpper().Contains('PRECISION')) { $family = 'Precision' }
+
+        $hit = $null
+        foreach ($e in $entries) {
+            if ($family -and ($e.family -notlike "*$family*")) { continue }
+            foreach ($tok in ([string]$e.modelswminame).Split(',')) {
+                if ($tok -and $model.ToLower().Contains($tok.ToLower())) { $hit = $e; break }
+            }
+            if ($hit) { break }
+        }
+        if ($hit) {
+            $zip = Join-Path $MediaDrive (([string]$hit.destinationDir) -replace '\*destinationdir\*\\?','')
+            $zip = Join-Path $zip $hit.fileName
+            if (Test-Path $zip) {
+                Ok ("Driver pack for '{0}': {1}" -f $model, $hit.fileName)
+            } else {
+                Fail ("Driver pack for '{0}' is listed but MISSING on the media: {1}" -f $model, $hit.fileName)
+            }
+        } else {
+            Fail ("NO driver pack matches '{0}'. PESetup logs this as a warning only - the bay will image with NO network drivers." -f $model)
+        }
+    }
+} catch {
+    Warn "Driver check failed: $_"
+}
+
+# --- 4. Media age --------------------------------------------------------
+# Approximate: PESetup expires media 30 days after build and Media.tag is
+# rewritten when the media is rebuilt, so its timestamp is the best local proxy.
+try {
+    $tag = Join-Path $MediaDrive 'Deploy\Control\Media.tag'
+    if (Test-Path $tag) {
+        $age = [int]((Get-Date) - (Get-Item $tag).LastWriteTime).TotalDays
+        if ($age -ge $MediaWarnDays) {
+            Warn ("Media is about {0} days old; it expires at 30. Rebuild it soon." -f $age)
+        } else {
+            Ok ("Media is about {0} days old" -f $age)
+        }
+    }
+} catch { }
+
+Write-Host "===================================="
+if ($fatal -gt 0) {
+    Write-Host ""
+    Write-Host "  $fatal BLOCKING problem(s) found. Imaging this bay will not work."
+    Write-Host ""
+    exit 1
+}
+if ($warn -gt 0) { Write-Host "  $warn warning(s), no blockers." }
+else             { Write-Host "  All checks passed." }
+Write-Host ""
+exit 0

playbook/shopfloor-setup/BIOS/check-bios.cmd

@@ -6,6 +6,11 @@ set "BIOSDIR=%~dp0"
 set "FLASH=%BIOSDIR%Flash64W.exe"
 set "MANIFEST=%BIOSDIR%models.txt"
 
+REM --- Report this machine to the PXE webapp (Hardware Coverage) ---
+REM Every WinPE boot maps this share, whatever image is picked next, so this
+REM is the one place that sees standard/engineer builds too. Best effort.
+if exist "%BIOSDIR%hardware-report.ps1" powershell -NoProfile -ExecutionPolicy Bypass -File "%BIOSDIR%hardware-report.ps1" >NUL 2>&1
+
 if exist "%FLASH%" goto :flash_ok
 echo   Flash64W.exe not found, skipping BIOS check.
 set "BIOS_STATUS=Skipped (Flash64W.exe missing)"
@@ -110,7 +115,8 @@ exit /b 0
 
 :flash_done
 echo   BIOS update complete.
-set "BIOS_STATUS=%SYSMODEL% updated %BIOSVER% -^> %TARGETVER%"
+set "BIOS_STATUS=%SYSMODEL% updated %BIOSVER% to %TARGETVER%"
+echo flash_done %SYSMODEL% %BIOSVER% to %TARGETVER%> X:\bios-fired.flag
 exit /b 0
 
 :staged
@@ -121,7 +127,8 @@ echo     It will flash during POST after the
 echo     post-imaging reboot.
 echo   ========================================
 echo.
-set "BIOS_STATUS=%SYSMODEL% STAGED %BIOSVER% -^> %TARGETVER% (flashes on reboot)"
+set "BIOS_STATUS=%SYSMODEL% STAGED %BIOSVER% to %TARGETVER% (flashes on reboot)"
+echo staged %SYSMODEL% %BIOSVER% to %TARGETVER%> X:\bios-fired.flag
 exit /b 0
 
 :compare_versions

playbook/shopfloor-setup/BIOS/hardware-report.ps1

@@ -0,0 +1,58 @@
+# hardware-report.ps1 - Report this machine's hardware to the PXE webapp so
+# its Hardware Coverage page can flag models with no driver pack or BIOS.
+#
+# Called by check-bios.cmd, which every WinPE boot runs from the BIOS share
+# before the imaging menu, so it reports every boot - including ones that
+# never pick an image - rather than only those that reach the Y: status push.
+#
+# Sends the exact WMI model PESetup matches driver packs on, the Dell
+# system SKU (what Dell's catalogs key on) and the BIOS version. Runs in
+# WinPE's stripped PowerShell: wmic only, no CIM cmdlets. Best effort:
+# logs to X:\Windows\Temp\hardware-report.log and never fails the boot.
+
+param(
+    [string]$PxeServer = $(if ($env:PXESERVER) { $env:PXESERVER } else { '172.16.9.1' }),
+    [int]$Port = 9009,
+    [int]$TimeoutSec = 5
+)
+
+$logFile = 'X:\Windows\Temp\hardware-report.log'
+function Log {
+    param([string]$msg)
+    try { "$(Get-Date -Format s) $msg" | Out-File -FilePath $logFile -Append -Encoding utf8 } catch { }
+}
+
+function Get-WmicValue {
+    param([string]$Class, [string]$Property)
+    try {
+        $line = (& wmic $Class get $Property /value 2>$null |
+                 Where-Object { $_ -match '=' } | Select-Object -First 1)
+        if ($line) { return ($line -split '=', 2)[1].Trim() }
+    } catch { Log "wmic $Class $Property exception: $_" }
+    return ''
+}
+
+$hw = @{
+    serial       = Get-WmicValue 'bios' 'SerialNumber'
+    model        = Get-WmicValue 'computersystem' 'Model'
+    manufacturer = Get-WmicValue 'computersystem' 'Manufacturer'
+    sku          = Get-WmicValue 'computersystem' 'SystemSKUNumber'
+    bios_version = Get-WmicValue 'bios' 'SMBIOSBIOSVersion'
+}
+Log "model=$($hw.model) sku=$($hw.sku) bios=$($hw.bios_version) serial=$($hw.serial)"
+
+if (-not $hw.model) {
+    Log "no model - nothing to report"
+    exit 0
+}
+
+try {
+    $resp = Invoke-WebRequest -Uri "http://${PxeServer}:${Port}/hardware/seen" -Method POST `
+        -Body ($hw | ConvertTo-Json -Compress) -ContentType 'application/json' `
+        -UseBasicParsing -TimeoutSec $TimeoutSec -ErrorAction Stop
+    Log "OK http=$($resp.StatusCode)"
+} catch {
+    Log "ERR $($_.Exception.Message)"
+}
+
+exit 0

playbook/shopfloor-setup/BIOS/models.txt

@@ -1,51 +1,73 @@
 # ModelSubstring|BIOSFile|Version
-13 Plus PB13250|Dell_Pro_PA13250_PA14250_PB13250_PB14250_PB16250_2.8.1.exe|2.8.1
-14 MC14250|Dell_Pro_Max_MC16250_MC14250_1.9.0.exe|1.9.0
-14 PC14250|Dell_Pro_PC14250_PC16250_1.7.0.exe|1.7.0
-14 Premium MA14250|Dell_Pro_Max_MA14250_MA16250_1.7.1.exe|1.7.1
-16 Plus MB16250|Dell_Pro_Max_MB16250_MB18250_2.2.2.exe|2.2.2
-24250|Dell_Pro_Plus_QB24250_QC24250_QC24251_1.9.2.exe|1.9.2
-5430|Latitude_5430_7330_Rugged_1.41.0.exe|1.41.0
-7080|OptiPlex_7080_1.37.0.exe|1.37.0
-7090|OptiPlex_7090_1.40.0.exe|1.40.0
-7220 Rugged|Latitude_7220_Rugged_Extreme_Tablet_1.50.0.exe|1.50.0
-7230 Rugged Extreme Tablet|Latitude_7230_1.30.1.exe|1.30.1
-7320 2-in-1 Detachable|Dell_Latitude_7320_Detachable_1.45.0_64.exe|1.45.0
-7350 Detachable|Latitude_7350_Detachable_1.9.1.exe|1.9.1
-7400 AIO|Latitude_7X00_1.43.0.exe|1.43.0
-AIO Plus 7410|Latitude_7X10_1.43.0.exe|1.43.0
-AIO Plus 7420|Latitude_7X20_1.48.0.exe|1.48.0
-Latitude 5330|Latitude_5330_1.33.0.exe|1.33.0
-Latitude 5340|Latitude_5340_1.27.1.exe|1.27.1
-Latitude 5350|Latitude_5350_1.20.0.exe|1.20.0
-Latitude 5440|Latitude_5440_Precision_3480_1.28.1.exe|1.28.1
-Latitude 5450|Latitude_5450_Precision_3490_1.20.1.exe|1.20.1
-Latitude 5530|Precision_5530_1.42.0.exe|1.42.0
-Latitude 5540|Precision_5540_1.42.0.exe|1.42.0
-Latitude 7430|Latitude_7X30_1.38.0.exe|1.38.0
-Latitude 7440|Latitude_7X40_1.28.1.exe|1.28.1
-Latitude 7450|OptiPlex_7450_1.34.0.exe|1.34.0
-Micro 7010|OptiPlex_7010_1.34.0_SEMB.exe|1.34.0
-SFF Plus 7010|OptiPlex_7010_1.34.0_SEMB.exe|1.34.0
-Tower Plus 7010|OptiPlex_7010_1.34.0_SEMB.exe|1.34.0
-Micro QCM1250|Dell_Pro_QBT1250_QBS1250_QBM1250_QCT1250_QCS1250_QCM1250_SEMB_1.12.2.exe|1.12.2
-OptiPlex 3000|OptiPlex_3000_1.38.0.exe|1.38.0
-OptiPlex 7000|OptiPlex_7000_1.38.0.exe|1.38.0
-Precision 5490|OptiPlex_5490_AIO_1.45.0.exe|1.45.0
-Precision 5550|Precision_3590_3591_Latitude_5550_1.8.0.exe|1.8.0
-Precision 5570|XPS9520_Precision5570_1.39.0_QSL0.exe|1.39.0
-Precision 5680|Precision_5680_1_27_0.exe|1.27.0
-Precision 5690|Precision_5690_1.18.0.exe|1.18.0
-Precision 5820 Tower|Precision_5820_2.48.0.exe|2.48.0
-Precision 5860 Tower|Precision_5860_3.5.0.exe|3.5.0
-Precision 7560|Precision_7X60_1.44.1.exe|1.44.1
-Precision 7670|Precision_7X70_1.8.0.exe|1.8.0
-Precision 7680|Precision_7X80_1.9.0.exe|1.9.0
-Precision 7770|OptiPlex_7770_7470_1.40.0.exe|1.40.0
-Precision 7780|OptiPlex_7780_7480_1.43.0.exe|1.43.0
-Precision 7820 Tower|Precision_7820_7920_2.50.0.exe|2.50.0
-Precision 7865 Tower|Precision_7865_1.6.1.exe|1.6.1
-Precision 7875 Tower|Precision_7875_SHP_02.07.03.exe|2.7.3
-Rugged 14 RB14250|Dell_Pro_Rugged_RB14250_RA13250_1.13.1.exe|1.13.1
-Tower Plus 7020|OptiPlex_7020_1.22.1_SEMB.exe|1.22.1
-Tower Plus QBT1250|Dell_Pro_QBT1250_QBS1250_QBM1250_QCT1250_QCS1250_QCM1250_SEMB_1.12.2.exe|1.12.2
+13 Plus PB13250|Dell_Pro_PA13250_PA14250_PB13250_PB14250_PB16250_2.18.1.exe|2.18.1
+14 MC14250|Dell_Pro_Max_MC16250_MC14250_1.19.2.exe|1.19.2
+14 PC14250|Dell_Pro_PC14250_PC16250_1.18.0.exe|1.18.0
+14 Premium MA14250|Dell_Pro_Max_MA14250_MA16250_1.13.1.exe|1.13.1
+16 Plus MB16250|Dell_Pro_Max_MB16250_MB18250_3.3.2.exe|3.3.2
+QB24250|Dell_Pro_Plus_QB24250_QC24250_QC24251_Combine_1.18.0.exe|1.18.0
+QC24250|Dell_Pro_Plus_QB24250_QC24250_QC24251_Combine_1.18.0.exe|1.18.0
+QC24251|Dell_Pro_Plus_QB24250_QC24250_QC24251_Combine_1.18.0.exe|1.18.0
+5430 Rugged|Latitude_5430_7330_Rugged_1.45.0.exe|1.45.0
+7330 Rugged|Latitude_5430_7330_Rugged_1.45.0.exe|1.45.0
+Latitude 5430|Latitude_5430_1.41.0.exe|1.41.0
+7080|OptiPlex_7080_1.39.0.exe|1.39.0
+7090 Ultra|OptiPlex_7090_UFF_1.44.0.exe|1.44.0
+7090|OptiPlex_7090_1.44.0.exe|1.44.0
+7220 Rugged|Latitude_7220_Rugged_Extreme_Tablet_1.53.0.exe|1.53.0
+7230 Rugged Extreme Tablet|Latitude_7230_1.34.0.exe|1.34.0
+7320 Detachable|Dell_Latitude_7320_Detachable_1.49.0_64.exe|1.49.0
+7350 Detachable|Latitude_7350_Detachable_1.24.0.exe|1.24.0
+7400 AIO|OptiPlex_7400_1.1.61.exe|1.1.61
+7400 All-in-One|OptiPlex_7400_1.1.61.exe|1.1.61
+AIO Plus 7410|OptiPlex_7410_1.37.0.exe|1.37.0
+AIO Plus 7420|OptiPlex_7420_1.27.0.exe|1.27.0
+Latitude 5330|Latitude_5330_1.38.0.exe|1.38.0
+Latitude 5340|Latitude_5340_1.31.0.exe|1.31.0
+Latitude 5350|Latitude_5350_1.26.0.exe|1.26.0
+Latitude 5440|Latitude_5440_Precision_3480_1.34.0.exe|1.34.0
+Latitude 5450|Latitude_5450_Precision_3490_1.26.0.exe|1.26.0
+Latitude 5530|Precision_3570_Latitude_5530_1.38.0.exe|1.38.0
+Latitude 5540|Precision_3580_Latitude_5540_1.31.0.exe|1.31.0
+Latitude 7430|Latitude_7X30_1.42.0.exe|1.42.0
+Latitude 7440|Latitude_7X40_1.34.0.exe|1.34.0
+Latitude 7450|Latitude_7X50_1.26.0.exe|1.26.0
+Micro 7010|OptiPlex_7010_1.38.0_SEMB.exe|1.38.0
+SFF Plus 7010|OptiPlex_7010_1.38.0_SEMB.exe|1.38.0
+Tower Plus 7010|OptiPlex_7010_1.38.0_SEMB.exe|1.38.0
+Micro 7020|OptiPlex_7020_1.28.1_SEMB.exe|1.28.1
+Micro Plus 7020|OptiPlex_7020_1.28.1_SEMB.exe|1.28.1
+SFF 7020|OptiPlex_7020_1.28.1_SEMB.exe|1.28.1
+SFF Plus 7020|OptiPlex_7020_1.28.1_SEMB.exe|1.28.1
+Tower 7020|OptiPlex_7020_1.28.1_SEMB.exe|1.28.1
+Tower Plus 7020|OptiPlex_7020_1.28.1_SEMB.exe|1.28.1
+Micro QCM1250|Dell_Pro_QBT1250_QBS1250_QBM1250_QCT1250_QCS1250_QCM1250_SEMB_1.19.3.exe|1.19.3
+Tower Plus QBT1250|Dell_Pro_QBT1250_QBS1250_QBM1250_QCT1250_QCS1250_QCM1250_SEMB_1.19.3.exe|1.19.3
+OptiPlex 3000 Thin Client|OptiPlex_TC_1.37.0.exe|1.37.0
+OptiPlex 3000|OptiPlex_3000_1.42.0.exe|1.42.0
+OptiPlex 7000|OptiPlex_7000_1.42.0.exe|1.42.0
+Precision 5490|Precision_5490_1.24.0.exe|1.24.0
+Precision 5550|Precision_5550_1.42.0.exe|1.42.0
+Precision 5570|XPS9520_Precision5570_1.42.0_QSL0.exe|1.42.0
+Precision 5680|Precision_5680_1_29_0.exe|1.29.0
+Precision 5690|Precision_5690_1.26.0.exe|1.26.0
+Precision 5820 Tower|Precision_5820_2.50.2.exe|2.50.2
+Precision 5860 Tower|Precision_5860_3.10.0.exe|3.10.0
+Precision 7560|Precision_7X60_1.49.0.exe|1.49.0
+Precision 7670|Precision_7x70_1.40.0.exe|1.40.0
+Precision 7680|Precision_7X80_1.32.0.exe|1.32.0
+Precision 7770|Precision_7x70_1.40.0.exe|1.40.0
+Precision 7780|Precision_7X80_1.32.0.exe|1.32.0
+Precision 7820 Tower|Precision_7820_7920_2.53.1.exe|2.53.1
+Precision 7865 Tower|Precision_7865_1.29.0.exe|1.29.0
+Precision 7875 Tower|Precision_7875_SHP_02.12.00.exe|2.12.0
+Rugged 14 RB14250|Dell_Pro_Rugged_RB14250_RA13250_1.19.1.exe|1.19.1
+P314260|Dell_Pro_P31x260_P51x260_P7xx260_Dell_Pro_Precision_PW51x260_2.4.2.exe|2.4.2
+P316260|Dell_Pro_P31x260_P51x260_P7xx260_Dell_Pro_Precision_PW51x260_2.4.2.exe|2.4.2
+P514260|Dell_Pro_P31x260_P51x260_P7xx260_Dell_Pro_Precision_PW51x260_2.4.2.exe|2.4.2
+P516260|Dell_Pro_P31x260_P51x260_P7xx260_Dell_Pro_Precision_PW51x260_2.4.2.exe|2.4.2
+P713260|Dell_Pro_P31x260_P51x260_P7xx260_Dell_Pro_Precision_PW51x260_2.4.2.exe|2.4.2
+P703260|Dell_Pro_P31x260_P51x260_P7xx260_Dell_Pro_Precision_PW51x260_2.4.2.exe|2.4.2
+P714260|Dell_Pro_P31x260_P51x260_P7xx260_Dell_Pro_Precision_PW51x260_2.4.2.exe|2.4.2
+P704260|Dell_Pro_P31x260_P51x260_P7xx260_Dell_Pro_Precision_PW51x260_2.4.2.exe|2.4.2
+PW514260|Dell_Pro_P31x260_P51x260_P7xx260_Dell_Pro_Precision_PW51x260_2.4.2.exe|2.4.2
+PW516260|Dell_Pro_P31x260_P51x260_P7xx260_Dell_Pro_Precision_PW51x260_2.4.2.exe|2.4.2

playbook/shopfloor-setup/BPRT/Register-BulkEnrollTask-Standard.ps1

@@ -0,0 +1,48 @@
+# Register-BulkEnrollTask-Standard.ps1 - register the BulkEnrollmentOrchestrator
+# logon task for the gea-standard and gea-engineer images.
+#
+# WHY THIS IS A FILE AND NOT AN INLINE COMMAND
+# This ran inline as "powershell.exe -Command ..." in the unattend's specialize
+# pass at RunSynchronousCommand Order 39. RunSynchronousCommand/Path is capped at
+# 259 characters by the unattend schema; the inline form was 604, so Windows
+# Setup rejected the ENTIRE answer file:
+#
+#   /settings/RunSynchronous/RunSynchronousCommand/[Order="39"]/Path
+#   Description = Value is invalid.   hrResult = 0x80220005   pass = specialize
+#
+# One over-length value invalidates every pass, so the machine stops at a dialog
+# with nothing configured.
+#
+# WHY THERE ARE TWO OF THESE SCRIPTS
+# gea-shopfloor uses Register-BulkEnrollTask.ps1, which launches the orchestrator
+# as a PowerShell script with -ManualFallback: shopfloor bays are vanilla by
+# design, so the orchestrator skips BPRT injection and the provisioning package.
+# gea-standard and gea-engineer enrol normally and call the .cmd wrapper instead.
+# All three image types share ONE Deploy\Applications\BPRT directory (a symlink
+# to _shared\Applications\BPRT), so the two variants need distinct filenames.
+#
+# PESetup's CopyPackages copies the whole of <media>\Deploy\Applications to the
+# target before the image is applied, so this script is present at
+# C:\Deploy\Applications\BPRT\ by the time specialize runs. See
+# docs/PESETUP-INTERNALS.md.
+
+$ErrorActionPreference = 'Stop'
+
+$taskName = 'BulkEnrollmentOrchestrator'
+$orchestrator = 'C:\Deploy\Applications\BPRT\Start-BulkEnrollOrchestrator.cmd'
+
+# Self-deleting task: schtasks /Delete drops the registration, then the
+# orchestrator runs. cmd's & chains them so the delete happens even if the
+# orchestrator later reboots the machine.
+$argument = '/c schtasks /Delete /TN {0} /F & "{1}"' -f $taskName, $orchestrator
+
+$action    = New-ScheduledTaskAction -Execute 'cmd.exe' -Argument $argument
+$trigger   = New-ScheduledTaskTrigger -AtLogOn
+# S-1-5-32-544 = BUILTIN\Administrators. GroupId + Highest so it runs elevated
+# for whichever admin logs on first, without naming an account.
+$principal = New-ScheduledTaskPrincipal -GroupId 'S-1-5-32-544' -RunLevel Highest
+$settings  = New-ScheduledTaskSettingsSet -AllowStartIfOnBatteries -DontStopIfGoingOnBatteries -ExecutionTimeLimit (New-TimeSpan -Hours 3)
+
+Register-ScheduledTask -TaskName $taskName -Action $action -Trigger $trigger -Principal $principal -Settings $settings -Force
+
+Write-Host "Registered scheduled task '$taskName'."