Sites no longer need either MAC in site-vars. pxe_nic_mac empty: before anything changes, the playbook runs pxe-pick-nic --auto. It takes the one wired port with a link, accepts it only if pxe-nic-check calls it isolated (no LLDP/CDP/802.1X, no other DHCP server, at most 10 hosts heard in 65 s), and pins it. The choice is saved in /etc/pxe-server/nic-pick.conf and never re-guessed at boot. When it cannot tell (no link, two links, not isolated) nothing changes, and the console banner says why and to run sudo pxe-pick-nic: pull the imaging cable and plug it back in, and the port that blinked is the imaging one. Both helpers are installed before the pick, so that works after a refused first boot. The site's corp domains and allowed switches are passed to the check. corp_nic_mac empty: every other wired port (en*, eth*) is a catch-all DHCP client, so GE can be plugged in at install or later. - dnsmasq stays pinned with interface=pxe0. A new check refuses any dhcp-range outside the imaging subnet, and proxy ranges. - The catch-all ports ignore offers from 172.16.9.1. - UFW allows SSH and 9009 by source on any interface, and keeps those rules when the old any-interface rules are removed. - pxe_nic_name must not look like en*/eth* in this mode. pxe-netplan-apply.sh takes 3 or 5 args. Without a pinned GE NIC it: - renames stray names (the old pxe0 after a re-pick, a leftover corp0) to enx<mac>, so the catch-all takes them, and restores them on revert; - checks that every NIC that had a DHCP address before has one after, tracked by MAC. With both MACs set (the WJ server), netplan, the dnsmasq pin and UFW render byte-for-byte as before. Tested in the pxetest VMs: - Fresh install with no MACs and the GE link down: the imaging port was picked and pinned as pxe0 with 172.16.9.1, and dnsmasq bound DHCP to pxe0 only. GE plugged in afterwards got a lease, SSH worked, and the guard reported pxe0 isolated. - --auto refuses with two links. - The interactive pick works by pulling and replugging the link. - A 3-arg re-apply is UNCHANGED. Unit tests (fake sysfs) cover the re-pick and pinned-to-catch-all renames.
11 KiB
Executable File
11 KiB
Executable File