Files
pxe-server/autoinstall/user-data
cproudlock ead3314f58 Two-NIC standard: pin imaging and GE NICs by MAC everywhere
Every server has an imaging NIC (static, the only one that serves
DHCP/TFTP/HTTP boot/SMB) and a GE corporate NIC (DHCP client, SSH and the
webapp on 9009). The playbook guessed the PXE NIC and the installer put
172.16.9.1/24 on every en* NIC, so a two-NIC box could answer on the GE
network.

- New per-site vars pxe_nic_mac / corp_nic_mac (required, from
  playbook/site-vars.yml or -e; template site-vars.example.yml), stable
  names pxe_nic_name / corp_nic_name (default pxe0 / corp0, overridable),
  pxe_server_ip, pxe_subnet, DHCP range. pxe_imaging_mac / pxe_ge_mac are
  derived from them. The play stops before touching anything if a MAC is
  unset, malformed, duplicated or not on the box (lists the box's NICs).
- Heuristic NIC detection and the single-NIC netplan task replaced by a
  two-NIC netplan template (match macaddress + set-name), installed by
  pxe-netplan-apply.sh: validate in a scratch root, back up, generate,
  rename, apply, restore the previous config on any failure. cloud-init
  network config disabled so it cannot rewrite it.
- dnsmasq: /etc/dnsmasq.d/pxe-nic-only.conf from the vars (interface=,
  except-interface=, no-dhcp-interface=); dnsmasq.conf IP/range from vars.
- UFW per interface: imaging NIC 22, 67/udp, 69/udp, 80, 4433, 445, 139,
  137/udp, 138/udp, 9009; GE NIC 22 and 9009 only. Old any-interface rules
  and the stale 9011 rule removed after the new ones are in.
- sysctl drop-in: IPv4/IPv6 forwarding off; ip_nonlocal_bind so Apache
  can bind the imaging IP before the address is up.
- Samba [global]: interfaces = 127.0.0.0/8 <imaging NIC>, bind interfaces
  only. Apache 80 and 4433 on the imaging IP only; 9009 stays on all (TODO:
  the webapp has no auth).
- autoinstall: DHCP only on en*, no static 172.16.9.1; apt geoip off and
  offline-install fallback now that the corp NIC may have a lease.
- Blancco UEFI/Secure Boot: blancco_kver (7.0.0-34-generic) drives the
  kernel, initramfs and modules builds instead of the running kernel;
  outputs vmlinuz-ubuntu-70, kexec-initrd-70.img, kmod-<kver>.tar.gz as the
  menu and blancco-init.sh expect; creates: guards keyed on the full kver.
  Ubuntu's shimx64.efi.signed published as blancco/shimx64.efi.
  download-packages.sh adds shim-signed, linux-generic-hwe-24.04 and the
  pinned linux-image/modules/modules-extra for BLANCCO_KVER.

Rendered with the live MACs and names, netplan generate output is
identical to the live config; pxe-nic-only.conf and the Samba binding
match live directive for directive.
2026-10-15 08:53:41 -04:00

133 lines
4.1 KiB
Plaintext

#cloud-config
autoinstall:
version: 1
# Locale, keyboard, timezone
locale: en_US.UTF-8
keyboard:
layout: us
variant: ""
timezone: America/New_York
# Network: DHCP only, on every wired NIC. On the standard two-NIC box the
# GE corporate NIC gets an address and the imaging NIC (no DHCP server on
# the imaging LAN) stays without one. No static 172.16.9.1 here: matched
# by name it would land on EVERY NIC, the GE one included, and the box
# would answer as 172.16.9.1 on the corporate network. First boot's
# playbook replaces this file with the two-NIC config pinned by MAC
# (pxe_nic_mac / corp_nic_mac in playbook/site-vars.yml). optional: the
# install and boot never wait for a lease (air-gapped is fine).
network:
version: 2
ethernets:
any-eth:
match:
name: "en*"
dhcp4: true
dhcp6: false
optional: true
# The corp NIC may now have a lease, but the install stays offline-capable:
# no geoip lookup, and if the Ubuntu mirror is unreachable (Zscaler,
# no route) install from the ISO instead of failing.
apt:
geoip: false
fallback: offline-install
# Storage configuration
storage:
layout:
name: lvm
match:
size: largest
swap:
size: 0
# User identity
identity:
hostname: pxeserver
username: pxe
password: '$6$MV3UwfSxKqxDYCwt$2IPUfSvqpzUdH6QVKHfPH8I9E0SPqNCh0lLvn.D9btxhZUYmceOGcB51Ryfg1Fojlroin.qguSKYFoIDGUIC20'
# Enable SSH
ssh:
install-server: true
allow-pw: true
# Installer-stage late commands
late-commands:
# Step 1: Install deb packages from CIDATA USB
- |
curtin in-target --target=/target -- bash -c '
mkdir -p /mnt/cidata
CIDATA_DEV=$(blkid -L CIDATA)
if [ -n "$CIDATA_DEV" ]; then
mount "$CIDATA_DEV" /mnt/cidata
if compgen -G "/mnt/cidata/packages/*.deb" > /dev/null; then
cp /mnt/cidata/packages/*.deb /tmp/
dpkg -i /tmp/*.deb 2>/dev/null || true
dpkg -i /tmp/*.deb 2>/dev/null || true
dpkg --configure -a 2>/dev/null || true
if command -v nmcli >/dev/null; then
systemctl enable NetworkManager
fi
fi
umount /mnt/cidata
fi
'
# Step 2: Disable networkd-wait-online (hangs on air-gapped network)
- ln -sf /dev/null /target/etc/systemd/system/systemd-networkd-wait-online.service
# Step 3: Create first-boot.sh
- |
curtin in-target --target=/target -- bash -c '
cat <<"EOF" > /opt/first-boot.sh
#!/bin/bash
# Expand root LV to full disk BEFORE playbook (playbook copies ~130GB of drivers+PPKGs)
ROOT_DEV=$(findmnt -n -o SOURCE /)
ROOT_DISK=$(lsblk -n -o PKNAME "$(readlink -f "$ROOT_DEV")" | tail -1)
PV_PART=$(pvs --noheadings -o pv_name 2>/dev/null | tr -d "[:space:]" | head -1)
if [ -n "$ROOT_DISK" ] && [ -n "$PV_PART" ]; then
PART_NUM=$(echo "$PV_PART" | grep -o "[0-9]*$")
growpart "/dev/${ROOT_DISK}" "${PART_NUM}" 2>&1 || true
pvresize "$PV_PART" 2>&1 || true
fi
lvextend -r -l +100%FREE /dev/mapper/ubuntu--vg-ubuntu--lv 2>&1 || true
CIDATA_DEV=$(blkid -L CIDATA)
if [ -n "$CIDATA_DEV" ]; then
mkdir -p /mnt/usb
mount "$CIDATA_DEV" /mnt/usb
if compgen -G "/mnt/usb/packages/*.deb" > /dev/null; then
dpkg -i /mnt/usb/packages/*.deb 2>/dev/null || true
dpkg -i /mnt/usb/packages/*.deb 2>/dev/null || true
dpkg --configure -a 2>/dev/null || true
fi
if [ -f /mnt/usb/playbook/pxe_server_setup.yml ]; then
cd /mnt/usb/playbook
ansible-playbook -i localhost, -c local pxe_server_setup.yml
fi
umount /mnt/usb
fi
sed -i "s|^/opt/first-boot.sh.*|# &|" /etc/rc.local
EOF
chmod +x /opt/first-boot.sh
'
# Step 4: Create rc.local
- |
curtin in-target --target=/target -- bash -c '
cat <<"EOF" > /etc/rc.local
#!/bin/bash
/opt/first-boot.sh > /var/log/first-boot.log 2>&1 &
exit 0
EOF
chmod +x /etc/rc.local
'
user-data:
disable_root: false
refresh-installer:
update: no