Volume capacity and physical drive health were two adjacent cards, and the operator reading a full disk is usually the operator reading a dying disk in the same minute. They are now one Storage card with two sections. Visual grouping only - the two tables share no key, storage being per volume and health per physical device, and one drive can back several volumes or none the operator sees. Nothing is reconciled across the sections; this is not the mapped-drive merge where two sources described the same drive and the worse status won. The tabs render type was the only sections-in-one-card mechanism and emitted label/value fields with no table path, so it now takes table sections too. That is the renderer every plugin uses, so both behaviour changes in it are mutation-tested. Two things only surfaced on contact: the empty-section filter had to grow a table branch, because a table section declares columns up front and dropping it when it has no rows takes its tab with it and reads as no disks rather than nothing reported; and full-width span was keyed off the declared render type, but a tabs panel holding a six-column table needs the same span and that is only knowable from fetched data. The diskhealth route stays. It no longer backs a panel, but it is a stable read for callers outside the renderer and removing it for a UI-only change would break them.
Tracked Services and Tracked Processes were sharing a tab with system health cards, so what is running on the box and how the box itself is doing read as one list. They now sit in a Service/Process Monitors tab and the old tab is System Monitors. The group vocabulary is duplicated across the renderer, the tab map and the panel declarations with nothing checking they agree, and a group named in one but not the others is dropped in silence - that has eaten cards twice. Tests now pin the vocabulary on both sides. Boot type and NIC link state were collected in Phase 2 but shown nowhere. Boot type only renders when fast startup applies, because uptime measured from a resume understates how long the kernel has been up and that is the case worth naming. Link state leaves a disconnected NIC unknown rather than half duplex: live hardware returns empty speed and duplex when unplugged, and half duplex is the cable fault signature this column exists to catch.
Every test pins a way the card could start showing a failing or unreadable drive as fine, which is the only failure mode that matters here: nobody investigates a disk that looks healthy.
Covers failure-first ordering, null predictfailure reading as unknown rather than OK, unknown outranking OK, both sources surviving for one drive, order independence, and malformed payloads. The ranking was mutation-checked: swapping the unknown and OK ranks fails the suite.
Also updates the panel count assertion, which correctly caught the new card.
_mapped_drives decides whether an operator is shown a fault, and had no tests.
Its only failure mode that matters is rendering a broken drive as working -
nobody reports a drive that looks fine, so that failure is silent by nature.
Covers the disagreement from the real capture (Get-SmbMapping OK vs net use
Disconnected), single-source drives, a missing smbmapping key entirely (the
live shape until the agent republish lands), absent status becoming Unknown
rather than blank, and malformed payload rows.
Each test was checked by mutation rather than trusted for being green. That
caught a bad one: the unrecognised-status test paired the unknown against
Unavailable, which wins on severity however unknowns are ranked, so the test
proved nothing. Pairing it against OK exposed something worse - with unknowns
ranked equal to OK the two TIE, and min() then resolves by argument order, so
the verdict depended on which source happened to report which status rather
than on severity. A drive would read healthy or broken based on enumeration
order.
Hence test_which_source_reported_a_status_does_not_change_the_verdict, which
asserts both directions of each pair. A single-direction assertion passes on
luck; asserting both is what makes an accidental tie visible. It is the test
that fails when the ranking is broken - the others stay green.
The hardware, OS and storage inventory had columns and data but nowhere to
be read: the only per-PC card was the status keyvalue, so a machine's
processor, firmware, disks and listening ports were reachable only by
querying the database.
Adds four Monitors cards - Hardware, Operating system, Storage, Listening
ports - split by the question each answers rather than by which JSON blob
they came from. OS and BIOS share one card deliberately; apart they are
three short rows each. A card yields no fields when its columns are null,
so an endpoint on an older agent hides them rather than showing a grid of
blanks.
User context is declared last on the page. The probe feeding it is not yet
producing output, so it reads empty for now, and being last means an empty
card sits below the populated ones instead of pushing them down.
The Activity feed showed a title and an event id, but the title is the
catalog name for that id - the same text on every occurrence - so two
different faults read identically. Rows now carry the provider name, and
the stored message body expands in place when the severity badge is
clicked. Commands expand to their result message, which is the reason a
failed one failed.
The badge doubles as the expander rather than gaining a control beside it,
and it keeps its severity label when open: swapping that for "Hide" would
cost the at-a-glance severity scan down the feed. Being a button rather
than a span, it is also now keyboard reachable.
map.body is additive in the shared renderer - panels that do not declare
it render exactly as before.
Curated events were re-read from the newest 25 entries per channel on every
collect, and the server appended whatever arrived. One real event was
therefore stored again on every cadence tick for as long as it stayed in
that window, so event counts measured how long a box had been up rather
than what had happened to it.
The agent now keeps a per-channel watermark of the last Windows event
record id it reported, persisted under ProgramData so a service restart
does not replay history, and sends eventrecordid with each event. The
server dedupes on (assetid, eventchannel, eventrecordid) behind a unique
index, so a replay from an older agent cannot double-store either.
Six inventory keys the agent had been sending all along - bios, disks,
domain, memory, osinfo, processor - were parsed, logged as unpersisted,
and dropped. They now have columns and are written on check-in, along
with user context, pending reboot, and the cpupercent/memorypercent/
idleseconds fields that were declared in the contract but always null.
Session-scoped data cannot be read from the agent's LocalSystem session 0
at all: mapped drives and user-owned listeners do not exist there. A probe
runs in the interactive user's session and hands results back through a
spool file. It is not yet producing output on a live endpoint; the column
and panel are in place and read empty until that is fixed.
Also bounds the user-context script wait. It was WaitForSingleObject with
INFINITE, so a hung script pinned the command worker permanently.
Uploading an agent build whose product version carried semver build metadata
(1.5.0+abcdef) was rejected, because the typed version string was validated as
a dotted-numeric value before the file was ever read. That string is only a
hint from the operator, and the build metadata it carries is not a legal
directory name for the version store.
The authority is the dotted-numeric FILE version stamped in the binary PE
resource, so validation now happens after the upload is parsed: when the typed
value is missing or not dotted-numeric, fall back to the detected version, and
reject only when neither yields a usable one.
Ben Baker's installed-software collection, software delivery (run_script and
update_app), agentless adoption tool and command-queue hardening, with his
authorship preserved.
Reviewed before promotion. Fixed: the endpoints plugin tests were never collected
by pytest, the SBOM snapshot table's key would exhaust on MySQL, ingest did not
truncate two columns strict MySQL would reject, and update_app's version branch
pinned a digest for a file that route never serves. Agent packaging moved off
require_role('admin') onto a new endpoints.agentpackage permission.
Contract 0.27.0. Full suite 2231, frontend 314.
The board was one card per source in a fixed grid: every source got the same
small box whatever it had to say (warranties showed 5 of 50), and a box per
source flattened priority, while the largest type on the page belonged to counts
that need nobody.
Now a severity rollup, one worst-first queue of everything needing a person, and
a row of context beneath. The queue is full width, capped per source so a noisy
check cannot bury a rare one, and names what did not fit with a link to it. Chips
filter the queue by check as well as by severity; both narrow what is already
loaded, so the counts and rows cannot disagree.
Dropped: an 'All assets' tile shown beside its own four addends, a printer strip
carrying the same count a third time, three cards whose job was to display 0, and
a Recent Devices table listing five machines all 'In Use'.
Contract 0.26.0 adds optional 'shortname' on dashboard cards - a title is written
as a heading and ran wider than the hostname it qualified as a row badge.
Also: the supplies card reported 'Low Supplies 0' when Zabbix was unreachable,
which reads as reassurance rather than the truth that nothing could see the
cartridges. It now distinguishes unreachable (says so) from unconfigured (stays
quiet - the site declined the feature) from a real zero.
Full suite 2182 passed, frontend 314 passed.
The machine page now shows the PC that controls it. The endpoint was correct all
along and returned both directions; AssetTriageBand discarded every peer whose
type was not 'machine' and was mounted only on the PC page. The counterpart type,
label and relationship types are now props.
Fixed while adopting it more widely: every band chip linked to /assets/<id>, and
there is no such route. The resolver that AssetRelationships.vue kept privately
is now frontend/src/utils/assetRoute.js, used by both - and its type lookup is
case-insensitive, because seed data capitalises the type names while this site's
database does not.
The legacy import is now safe to resume. The 409-resolve asked for
per_page=10000 against a server that clamps to 100, so it silently searched the
first 100 rows and dropped links past that on every re-run. The crosswalk is now
bound to the database it describes, so one carried across a rebuild is refused
rather than attaching rows to the wrong assets. Source database names are
resolved from the environment, so the loader can be aimed without editing it.
Full suite 2178 passed, frontend 280 passed.
The rollup took the highest fix version across a component's advisories, which
is wrong whenever an advisory is patched on more than one release branch. nanoid
is fixed on both 3.3.x and 5.x, and it is transitive under a postcss range of
^3.3.11 that no 5.x release can satisfy - so the recommendation was unreachable
rather than merely large.
Per advisory the target is now the lowest fix above the version in use; per
component, the highest of those. Fixes on older branches are skipped rather than
offered as a downgrade.
scripts/scan_sbom.py checks the generated SBOM against OSV.dev by purl. The SBOM
shipped to every server and nothing read it, so 'are we exposed to this advisory'
was still a person going and looking.
Shipped and build-only findings are both reported, but only shipped components
can fail a build - the highest-severity match in the tree today is against the
test runner, and a gate that fails a release over that gets bypassed and then
catches nothing. Severity is taken from the advisory rather than derived from a
CVSS vector, and an advisory with no recorded word is reported UNKNOWN and never
gates.
scripts/vulnerability-allowlist.json records reviewed advisories with the reason,
the accepter, the date, and what would invalidate the reasoning.
Documented in docs/DEPENDENCY-SECURITY.md.
Thirteen commits from benjamin.baker plus the review fixes. Everything he built
is here: the endpoints plugin and its command queue, the .NET endpoint agent,
the computers policies subsystem, the site-asset CSV import with its adapters
and collector, Entra device identity, and the catalog hand-merge.
His branch predates four commits on main (section ticking, the generator share
links, Secure Send copy message, and the smoke-test workflow), so those come
through untouched - nothing of ours is removed by this merge.
wilm stays as its own branch; this does not close it.
Applied on top of af13337 so nothing already on wilm is rewritten.
AUTHORIZATION. The six new policy GETs were @jwt_required(optional=True) with
no permission at all, so an anonymous caller could list configuration and
business policies - gated only by a feature flag that 404s while off. They now
require computers.view. The six policy write routes stacked @jwt_required()
above @require_permission, the same pattern removed from nine endpoints routes
in this very push: the outer decorator answers an anonymous request 401 before
require_permission can consult the guest role, so a grant to guests silently
does nothing. Removed, and the now-unused import with them.
tests/test_core/test_public_read_surface.py failed at af13337 with seven ungated
GETs. It passes now. The seventh, endpoints.claim_next_command, is genuinely
agent-facing - authenticated in the handler by the endpoints collector key,
because a bay has no user session - so it joins PUBLIC_ENDPOINTS with its reason
written down, exactly as report_command_result already does in test_authz.py.
Note which half is public: claiming a queued command is the agent's business,
while ENQUEUEING one is the real authority and stays gated on endpoints.command.
INSTALLER. -BaseUrl and -CollectorKey are now mandatory with no defaults, and
https is enforced unless -AllowInsecureHttp is passed for a local test box. The
defaults were a real hostname (ADR-015) and a live collector key: a key in
source is a key in git history, and that key is also the command channel's kill
switch. Removing it here does not undo the disclosure - it must be rotated on
the server, and purged from af13337 - but it stops the next clone carrying it.
IMPORT. A committed import wrote thousands of rows and left no audit trail; it
now writes one AuditLog row inside the same transaction, so it cannot survive a
rollback or go missing from a commit. The computer-type dropdown asked for
per_page: 200, which the API ignores in favour of perpage and clamps to 100
anyway - it uses a new computersApi.types.listAll(), the pattern already applied
to the other selectors. And the comment claiming the template example rows are
"emitted as commented rows the engine skips" was the opposite of the truth: they
import as live data, the emitted instructions say so, and a test depends on it.
Not fixed here, deliberately: rotating the leaked key, purging it from history,
and the endpoint agent's own hardening (per-host credentials, a protected
process denylist so stop cannot kill security tooling, signing before the
PowerShell runner is enabled, registry ACLs, and the 25-second long poll that
will pin a worker thread per bay).
Default fuzzy reconcile threshold to 0 and refuse merges when digit runs differ so numbered labels like Bay 311 never bind to Bay 310. Keep edit forms from clearing saved model fields when category filtering hides untyped rows. Includes in-progress computers policy and endpoints command feature work.
Migration tests knew no endpoints head revision, so the parametrized guards raised KeyError. Register it in EXPECTED_HEAD_REVISION.
EndpointState declared lastreportedat both index=True and an explicit db.Index over the same column, and the baseline migration named single-column indexes differently from what create_all builds. On a pre-existing table the name-keyed guard could not see the create_all index and added a duplicate, tripping the idempotency guard. Drop the redundant declaration and rename migration indexes to ix_<table>_<column> to match.
endpoints was absent from the universal site profile, so the installer would not offer it and prune-schema would drop its tables at provisioning. Add it.
The agent design record lived under docs/, which is stripped to the public wiki and normally absent from the tree; a lone file there un-skipped the wiki-publish guards. Move it into the plugin.
The merge of the Entra device-identity work added computers 0002/0003 migrations, advancing the computers head past its anchor. Update the expected-head guard to match so upgrade-all stays green.
PC records now carry Entra/Azure device identity so imported machines keep a durable link back to their directory object instead of matching on hostname alone. Adds azuredeviceid, azureobjectid, and azuredevicecategory to the Computer model with matching migrations, surfaces them read-only in PCDetail as an Entra Device Info card, and lets PCForm edit the device id directly. The computers plugin registers a machineassetnumber import hook that reconciles PC-to-machine links during bulk import and warns on unresolved or conflicting relationships.
Adds importsources adapters that normalize Azure device-group and Thor PC inventory exports into canonical ShopDB CSVs via hostname alignment, exposes register_import_hook and RowWarning on the shopdb.api contract surface (contract 0.21.0), and refreshes the Import Site Assets page with clearer source instructions. Includes reconcile_locations maintenance script and coverage for the new import paths.
